Qosmio G30 with 2 GB of RAM is out of memory when I open certain programs

Similar Questions

• How to connect the external monitor for Qosmio G30 with a HDMI cable

  Hello

  I have G30 also I have Samsung 32 LCD screen LA32S8
  I have the HDMI cable. I'm trying to connect the Qosmio G30 with the LCD screen and watch nothing displayed.

  I would also like to ask;
  Can I use the LCD screen as a monitor for laptop or I plug it into the PC output?

  THX and I need this help.

  Hello

  1. attach a TV or monitor to the Qosmio G30 HDMI while both units are in a State "turned off the power.
  2. turn on the TV or monitor first and then the Qosmio G30.
  3 Qosmio G30 should automatically detect the HDMI connection and video output can be seen via HDMI to the TV or monitor.

  Check it out

• With computer freezes in 15 seconds, or as soon as you open any program it freezes instantly

  Original title: computer freezing

  With computer freezes in 15 seconds, or as soon as you open any program it freezes instantly. Changes prior to problem change brother printers and the addition of camera, log in to view the cameras

  Please run a check of system files (SFC) & DISM if you're on win 8 or higher 
  
  

  All instructions are in our Wiki article below...
  If you have any questions please ask us for .

  Check the file system (CFS) Scan and repair system files

• My computer with Windows 7 does not display photos in folders when you open a folder where are saved in photos.

  My computer with Windows 7 does not display images in folders when you open a folder where are saved the images there, I do not see any image photo immediately. I don't see it when I click Open the pic. Then for the next photo, I have to click Open once again, one by one. So without opeing one by one, I can't have see images, it is very difficult for me to manage all the images.

  The following article might be worth a visit:

  Windows 7 - How to enable or disable
  Thumbnails in the Explorer of Windows 7
  http://www.SevenForums.com/tutorials/11738-thumbnail-previews-enable-disable.html

• Hi, my old G5 died and now I need to download the version CS3 average Easrtern - my new Macook has no space for a CD. I have all my serial numbers. I was with the cat for hours - they sent me a link - but when I open the program - all the Hebrew has been

  Hi, my old G5 died and now I need to download the version CS3 average Easrtern - my new Macook has no space for a CD. I have all my serial numbers. I was with the cat for hours - they sent me a link - but when I open the program - all the Hebrew was reversed. I need to ME version. Where should I go?  MANY thanks, Naomi

  The latest product from Adobe's creative cloud that we create no more any version of Creative Suite.

  You can check the availability of creative cloud subscriptions in your country from here: https://www.adobe.com/content/dam/Adobe/en/products/creativecloud/cc/pdfs/cc-availability-matrix.pdf

  Purchase at: pricing and membership creative cloud plans | Adobe Creative Cloud

  Also see, modify the language setting for Adobe Creative Cloud applications

  Let us know if that helps.

• I need to reactivate Photoshop CS4 because I have a new hard drive in a reminder for my 2.5 yr old iMac last operating system running. When you open the program, I was told to contact Adobe support and give them an error code: 150:30. Please help with per

  I need to reactivate Photoshop CS4 because I have a new hard drive in a reminder for my 2.5 yr old iMac last operating system running. When you open the program, I was told to contact Adobe support and give them an error code: 150:30. Please help with permission. ?

  You can repair it yourself. I have a screenshot guide. You use app the Mac Terminal and a python (.py) script that comes with the recovery of the license for the Mac package.

  Don't forget to leave a space after typing sudo python and note that your password will not display any points. Simply enter it blind.

  Start 11 Message and take your time. It does not work. Layout error 150:30 opening Photoshop cs4 on Macbook Pro

  Gene

• Qosmio G30-102 - can I install RAM DDR2 - 667 Kingston rather RAM DDR2-533?

  Hello

  I have a Qosmio G30 102 and I wanted to spend my RAM to a total of 4 GB (currently I have 2 GB installed with specifications of a PC2 - 4300 DDR2 (533 MHz)). So I searched for RAM, and I wanted to know it would be possible for me to install.

  * Kingston Technology - memory 2 GB PC2 5300 667 MHz 200pin SODIMM DDR2 *. Would it work properly and if so it would be better than doing a (* 1 GB) memory PC2 - 4300 DDR2 (533 MHz) * the standard RAM installed on my Qosmio?

  Thanks in advance for the answers of th

  MB

  Hello!

  To upgrade RAM on my laptop, I used Kingston DDR2-667, and it works without any problems! :)

  Thus, you can use this module Kingston too but I guess that it runs only on due speed 533 MHz FSB of the processor limitation. You can check with a tool of information material such as Everest or PC Wizard 2008 for example the speed of the FSB.

  As far as I know, the laptop can be upgraded to 4 GB maximum RAM.

  Good bye

• No his TV on Qosmio G30 with WinXP Pro

  I have a Qosmio G30 and was forced to install XP PRO due to the network at work. My IT support managed to get all the drivers installed, and everything seems to work properly. The only question that i'got is that I have no sound while watching TV. Either in the Qosmio player or WinDVR.

  In Device Manager, the sounddrivers appears as "rather old" and "old videodrivers", is the same version of XP MCE?

  Some of you who installed XP PRO can help me please?

  Hello

  Have you checked the page of the Toshiba driver?
  I checked this page and found that 3 different Qosmio G30 drivers exist on the page.
  First, you must choose the correct unit.
  Second, if you are installing the drivers manually you should check the site installation instructions document and you should follow this guide line.

  Moreover I didn t find the drivers, particularly for WinXP Pro, but only for WinXP MCE, but I presume that these drivers also work with XP.

  In any case, for most of his TV problems occur because of wrong settings PAL/SECAM.
  Please also check these options.

• Qosmio G30 (PQG32L) - can use only 3.25 GB of memory on Windows 7 64 bit

  My Qosmio G30 (PQG32L) found 4 GB of memory, but only 3.25 GB of memory can be used. I'm updating to Windows 7 64-bit, but it does not help.
  BIOS reports 4 GB of RAM.

  Windows 7 64-bit operating system

  Anyone can activate the Qosmio G30 usable memory to 4 GB?

  What Intel Chipset is in the G30? (Launch CPU - Z to find out. Google is your friend)

  Some Intel chipsets are limited to 3 GB.

• Why do I get a popup with Windows Installer when I open a program used with Explorer.

  Original title: pop-up Windows Installer

  Can anyone help with why I get a Windows Installer popup on opening a program used with Explorer.  Does not happen with Google Chrome.

  Hello

  1. is it that occur when you use internet Explorer?

  2. don't you make recent changes?

  I suggest you try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

• My workscreen suddenly changed;  picture came from the bridge as a single image;  I have to go to view/ScreenMode/Full with the Menu bar, for each image!    Then when I opened three images, their names do not appear in the upper part.  How to restore?

  How to reset the workscreen in PS CS5 so it happens always full screen with tools, etc.  Mine suddenly started showing only the image on a small frame when I opened the bridge.  I have to slide the wide screen to work;  and then do not show the names of the images I opened.  I restarted.  I quit and reopen PS I did cause it.  How to return to the default I want?

  Has not re - install.  Seemed too complicated.  Fished around with the program and set up a workscreen substitute that works well.  Finally, I update and have it installed by a pro.  Thanks for your help.   Tom

• Qosmio G30-175: DVD player - RAM, it's a CD player

  Hello people, I once again.

  My 2 week old Qosmio G30 - 175 has a DVD-RAM drive that now appears in my computer as a CD player. As a result (I think) it will not automatically DVD playback. I can play manually through the media library or WMP, but no option does appear in the properties of the drive for auto, DVD playback.

  Can someone tell me why this happened? It is used to appear as a DVD - RAM drive. The only thing I did was to install Nero Premium. Who would have something to do with it?

  Thank you very much.

  Hello

  Some people here in the forum have had problems with burning and DVD recognition because the different burning applications were installed on the operating system.
  Try to remove the other burning software and use only Nero.

• Qosmio G30 and intel SSD - Windows 7

  Hi, I'm new to the forum

  I have a Qosmio G30 with Windows 7 32 bit - model G30 140 31F
  I bought an SSD intel 160 GB because of the promissed 250 MB/sg reading speed, because I need for video editing.
  I tried in Win Xp and now Windows 7 and it gets up to 120 MB/Sg

  I guess it s because of the drivers but I instal the drivers of storage can´t intel matrix any version of it. I tried a lot of them and with the compatibility mode too. It gives me an error saying I have not the minimum requirement.

  I have 4 GB of RAM and 2.0 Gzs centrino duo.
  I have install intel ssd toolbox and it does not recognize the intel SSD drive as a drive intel to improve the speed and other things.

  Please help me to get my speed in the car because it has to be and to have the TRIM option enable in order to have the life of my unit any longer.
  I also have the latest firmware in the drive.

  Thank you in advance.

  DANI

  PD: It coul be, perhaps, if our computer is a sata 150 controller in place a 300 sata controller? I don't know if the control is one of them in any case.

  Post edited by: Gazpachete

  Hi Gazpachete,

  I put t know how you managed now installing Windows, but Qosmio G30 is equipped with a SATA150 interface... This means that you will never get the 250 MB/s read speed of the HARD drive. You will get a maximum speed of 150 MB/s theoretically, but in most cases it of also a little slower.

  How did you check the current speed?
  But 120 MB/s is a good speed. You should be satisfied and it s faster than each computer portable HARD drive. ;)

• Qosmio G30 - RAID may not reflect new 500 GB HARD drive

  I have installed 2 new identical 500 GB hard in my Qosmio G30 with Windows XP.

  The system works well, but the disc cannot be mirrored. Report of the Raid Controller is 'Normal Operation status.

  This disk cannot be used for mirroring because it is outside the management of the RAID."

  Who can tell me whether it is a disc error or is the drive of 500 GB to big for the toshiba with Windows XP raid controller?

  > Can anyone tell me if it of a disc error, or is the drive of 500 GB to big for the toshiba with Windows XP raid controller?

  Hmm. I m not very good, but it could be possible that the 500 GB HARD drive is too big for the mirroring of the mode.

  But have you tried to change the mode in comforter Toshiba RAID you might find in Toshiba Assist-> Protect Fix & -> RAID Console

  Check if you can switch to the mirroring.

  By the way; RAID-1 is defined in the BIOS?
  Usually, when you use RAID-1 configuration, the RAID is set to mirroring. In this case, the operating system recognizes the reduced ability to both hard drives (in your case, it is not important since you are using the two 500 GB HDD).

  Check it!

• Qosmio G30 - HDD2 not found after replacement

  The lack of HARD drive capacity, I replaced drive HARD n ° 2 (drive D :) on my Qosmio G30 with a bigger (640 GB instead of 200 GB).
  The startup is going well, Windows 7 starts immediately. But the HDD is not shown in the 'Computer' window (the replaced a used for shown).

  There is just the c drive and the DVD drive.
  Do I have to format the D: drive first? How can I check if the HARD disk hardware is OK.?

  thx a lot

  Ulrich

  Hey,.

  > Should I format the D: drive first?
  Yes, all new HDDs must be formatted first, until you can use it. Then go to the tool disk management in Windows, where all drives will be displayed. You should see the second HDD.

  Right-click on it and create all the partitions you want to and him format. After that, they will be displayed in my computer and you can use it. :)