Qosmio G40 cooling fan problem

Hello everyone I bought international student G40. Nearlly got about half of the year.

I recentlly that are there is a problem with my G40, I usually wear my G40 in the library or at my place one friend, once I took G40 out of the bag and put on the desktop and turn on, the CPU fan appears nosiy.
It's kinda like the frame of the cooling fan is changed in movement, but it will be gone in a very short time, around 2 or 3 minutes.

AFAIK fan it's perfect job, just at the moment where I take it to another place and turn off and it appears as follows.

Anyone found this before, does anyone has idea what's going on with my G40?

Sorry, but I have never heard something like that. When you carry your laptop somewhere is the laptop turned off properly or maybe sleep/hibernation mode?

Tags: Toshiba

Similar Questions

  • Error 90 b - cooling fan problem

    Hello

    A few days ago I started getting message, with a cooling fan problem, error 90 b

    But this error was only occurring when I started my laptop after 5-6 hours

    I mean when I started this morning, at the first moment it showed this error, and when it will stop automatically (it says, ENTER to continue starting or it will stop in 10 or 15 seconds) and then I start it again, but this time, no error started end

    So guyz, I wanted to know whether hardware or software problem or something else

    Still my warranty period which goes, so should I goto HP support center?

    I'm on HP Pavilion dv6

    It is material but may be repairable before you send it. Bend over a paperclip and stick it through the grid to hold the fan and prevent it from running out of control and blow compressed air in the grid to dislodge any dirt or dust that can be hung up the fan. If it does not the fan may need to be replaced.

  • Pavilion laptop dv6: want details about the cooling fan problem

    He showed when ever I start the laptop like this,

    the system has detected that a cooling fan does not work correctly.

    System fan(90B)

    so please give me suggestion what to do with this problem in a way it requires to change the fan or the amything else.

    Thank you

    Verdier

    Your Service Manual:

    Manual

    You have an i5 processor and 1 GB dedicated video, so it's your cooling fan:

    For use only with the computer models equipped with an Intel processor and a graphics subsystem with 1024 MB memory discreet 665308-001

    P. 83 of the manual start instructions on the replacement of the fan/radiator.

    http://Geb.eBay.in/g/ImportHubViewItem?Itemid=121230548704 & CPU-FAN-Heatsink-for-HP-Pavilion-665308-001

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Qosmio G40 has a problem with HDDVD

    Hello
    I just bought Qosmio g40 laptop friendly, but I can't watch HD DVD movies on it.
    Sound film accidents so update bios Drivers for graphics card, reader HDDVD Toshiba but which makes no changes.

    I don't know where to go and how to solve the problem of last Samurai THAT HDDVD does not play.

    Can anyone help?

    Check this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=28538

    Possibilities are the HD DVD firmware update or the update of the HD DVD player

  • HP Notebook 2000 cooling fan problem

    Good, everyone. I had my laptop HP 2000 for a few years and I discovered my first major problem a few days ago, when the cooling fan has stopped working. I don't really bother me too much because I have a USB powered cooling fan which depends on my laptop, and it does a good job. My laptop everything on the same average level.

    The biggest problem that I have is a few hours, the laptop turns off automatically because of this.

    So, when I boot it upwards (turn on), it is a reminder that the cooling fan is not working and I have to press 'enter' or the laptop goes off in 15 seconds.

    How can I make the laptop does not take into account the fan broken cooling? I don't want to spend the money to fix it because I can count on the USB-powered device.

    Thank you!

    ~ Mark

    No, you can't. It stops probably precisely because it is time cpu peak on the threshold of security sometimes so he stops down to avoid damage.

    Cooling of hp systems are not the best when working so the thermal stress on the cpu, gpu & mainboard will be bad & failure happen very quickly.

    Fan is very cheap and can be done YOURSELF, if you have some skills to the dismantling of these sorts of things & guides following order to hp service manual & other online.

    I expect a new fan & new thermal paste & calibration and cleaning would do wonders for the execution of time & the laptop's long-term health.

  • Model HP 625 cooling fan problem

    Hello

    I would like to ask questions about my cooling fan of my model HP 625. A few days ago, I noticed that my PC starts to overheat too with "Everest" monitoring program. It indicates that graphics cards ATI Radeon HD 4500 1 GB (what is intigrated in the motherboard) gose up to 83 C and the PC stops. After that, I noticed the cooling fan dosen't work, it starts on max speed, only when it reached the critical level of heat and stops / no error messages appear. "Tried to look in the BIOS, set up for fans cooling options, but there is only one option Always turn on the fan when the use of current alternative" and nothing else. Tried to use the "Fan speed" program which allows to adjust the speed of the fan on a different pace, according to what she monitors and cools but cela did not. The program find the cooling fan and he sets up on the desired speed, but no effect, it starts only when it reaches the critical level. Everything is correctly connected to the motherboard.

    Hi menester.

    It seems to be a hardware malfunction with your fan and heatsink to the system of the computer. However try to update BIOS for your NB to www.hp.com and keep the NB under observation for a few hours, also make sure that ports of breakdown of your NB is clean and the NB is placed on a hard flat surface and then check if the problem is solved or not. If this is not so for sure it's a hardware problem so contact HP Technical Support and get the repaired NB.

    I am an employee of HP.
    • Say thank you by clicking on the star of "congratulations" on the left
    • Make it easier for others to find solutions, marking my answer to "accept as Solution" if it solves your problem...

  • For 90 b cooling fan problem

    HP Pavilion dv6-6119tx notebook PC

    Product number: QB365PA

    Hello

    I get fan error that it is not working properly and are likely to damage my data and the cooling system.

    Although when I continue starting, I hear the outgoing sound of cooling air fan and hot air, showing that the cooling fan works.  I showed it to the HP service center they cleaned the cooling fan, but still, I get the same error.
    Now what to do?

    An error message is an error message. Even if the error is not there at startup does it throw an error once it heats up, tells me that there is a hardware problem. The fan needs to be replaced. There is no other solution. The fan has sensors inside that fall within a chip on the motherboard and we cannot change the fact that the data provided by the sensors are out of specification. I don't think that your machine is in immediate danger and you can continue to use it because the fan still works, but the question will continue to worsen.

  • Cooling fan problem

    Hello when I start my laptop (which is a g6 Pavilion) gives me a message saying that the cooling fan is not working properly and your computer can do unpredictable things. So I started it up normally and don't not for long after that my norton pops up saying that google chrome is the high utilization of the processor, then my frames drop off as soon as this happens my computer gets really hot, then turns off. Now, whenever I start my computer it gives me this message please help.

    I guess you have too much dust blocking the vents and the fan itself.

    Make it difficult to turn, you mightwant or replacing the fan to clean it.

  • HP pavillion (don't know who): Hard reset - system cooling fan problem

    When I turn on my laptop a message indicating that there is a problem with the cooling system etc., (90 b system fan) fan

    I followed some instructions online include blowing through vents to try and remove any dust or dirt build up, the next time I turned on my laptop the message disappeared... However, it turned up which means that the problem is still there.

    I went on hp techcenter Web site and he said to do a hard reset as the next step - I'm afraid that this will remove all my documents, music, pictures etc it goes?

    In addition, will be a hard reset even fix the fan cooling or is something that must be taken in a store to fix properly, I don't want to mess with it and have it crash on me even more!

    Would appreciate any advice or suggestions, thank you!

    Hi LCh1,

    Please try the following,

    A Hard reset about a drain of power & does not affect your files.

    Just unplug battery & adapter then press & hold it hold the button for 30 seconds & then tun turn it on with the power cord only.

    This is the right way to do a Hard reset.

    Also update the BIOS to make sure a little extra.

    After all, if you have the same problem, contact HP Support by phone or chat if the asset guarantee.

    Or buy the chassis fan & do replace it yourself or contact a local ASP

    It may be useful

  • B580 cooling fan problem

    Hi, I have a problem with the laptop Lenovo B580. The problem lies in the continuous operation of the cooling system. After buying a week everything worked without problems, i.e. of cooling single turn on during a moment, and what to run 15-20 minutes on the first. But now it stil works on a second speed independently of the load (top speed jumps only when the charge reaches more than 90% for each of the hearts) and works within 2 seconds after the wake up the computer from sleep mode, as well as at the same time, after the departure. Temperature measured 1.0 RC4 CoreTemp program shows the temperature of 31 to 37 degrees for each of the nuclei at 0-10% load (a de facto to idle state) within a minute after the start. All of the drivers is installed and the Lenovo software, the profile of "energy saving" in the control panel. In general, the computer is cool box anywhere, but working in a quiet environment more long is sometimes tedious and boring. Running Windows 7 x 64 Home Premium. Computer bought December 8, 2012. BIoS is the latest 2012 September 6 should service or can I do something to fix this? Or is this model it is? (Sorry for my English, I hope you understand what I wrote)

    Should the service or can I do something to fix this? Or is this model it is?

    (Sorry for my English, I hope you understand what I wrote)


  • Qosmio G40-129: temperature problem & keyboard

    I think that the temperature, it is not normal:

    Material Monitor_ of _Intel Mobile Core 2 Duo T7700
    Temperature sensor 0 48 ° C (118 ° F) 0 x [34] (Core #0)
    Temperature probe 1 50 ° C (121 ° F) 0 x [32] (Core #1).

    _GeForce 8600M GT monitor_ material
    Temperature sensor 0 64 ° C (147 ° F) 0 x [40] (GPU Core)

    Sound without game... only web browseing

    Are its normal?
    And the keybourd its lock as frm time to time... need to press fn + f1 twise to unlock... Why is that

    Any help please
    Thank you

    Hello

    The temperature seems to be ok
    50 c for a CPU and 64 ° C for the graphics chip is nothing unusual

    If you wish, you can change some settings for Win7 or Vista power management.
    You can set the modules of cooling for maximum performance and can decrease the performance of the processor.

    You can also try to clean the cooling modules. This should be done from time to time to remove dust that affects the circulation of air.
    You can use a compressed air jet its ok for such a purpose.

    Welcome them

  • Adding package 1.1.3 value Qosmio G40 and Toshiba problem

    Hi, I have updated the bios to version 1.70, I updated the version 1.13 VAP. Now it is impossible for me to launch the HWsetup utility, I have this message: an unsupported operation was attempted, and pc diagnostic tool displays a white screen. What can I do? Thank you very much!

    Post edited by: krauzed

    Hello

    I'm afraid that you can't do much. As far as I know this update allows PPV than flash cards (when you press the FN key) move a lot faster than before. Of course, this new version kills other applications. I can imagine someone Toshiba noticed that the same and the new update will be available soon.

    In the meantime you can try reinstalling both is not working tools solution.

  • Qosmio G50 - problem with graphics card or fan problem?

    Over the last year, I bought myself a Qosmio G50 at the beginning it seemed very nice and kool or so I thought until after the expiration of the first year, I noticed a small problem with my laptop.

    1. my fans are loud and sometimes they overheat, whats worse I can't clean my computer laptop but because fans note my fans were quite
    the first year to have my laptop, so I have no idea why they are noisy, they shouldn't be doing this right?

    2. now that my fans are not clean, I'm in trouble, play with my video games, at least those who need the video card.

    3. while I play my games I have noticed how the fans or the video card video game a little speed and not the game, but you get the idea, it was bugs me for everything now.

    Here is my last question for Toshiba support here
    Qosmio G50 laptop Fans can be replaced? If so, how much would it cost?

    What are the causes of the nose of the fans to make it so hard?

    More help on my problem would be welcome.

    If you have any questions for Toshiba support service then you are on the wrong place here. This is the forum user.
    Maybe you should contact the nearest authorized service provider and ask it.

    They can clean up your computer is turned on in a professional manner. After cleaning of the cooling and ventilation of cooling grid will be dust-free and run with low speed.
    The material can be cooled properly.

  • Qosmio X 500 - 11U restarts when games & cooling system problem message

    Hello

    I have a Qosmio X 500 - 11U PQX33E, bought in the summer 2010. Since 2012 (1 month after the warranty ended) he started to do restarts without reason, but I gave much attention to it, as it happened rarely. However, after 1 year things are worse and I ended up having a cell phone game that I used only as a PC Web browser. From time to time, I blew the fans to clean... Finally, I decided to fix it.

    I gave it to a technician, he cleaned, replace the dough thermal CPU - GPU and replaced one of the fans who did not work properly.

    Still nothing has changed. I tested it again (by running windows experience rating), and it crashed as before.

    I made the big decision to go back to factory settings and I made a clear installation of all components of the system (including the stuff of all the toshiba).

    Restart again for the note windows. ... (the same thing happens when I run any high graphics games)

    I have flashed the bios to v2.90

    Restart again for the note windows. (the same thing happens when I run any high graphics games)

    In addition to the above, because I did the clean install of the system, I started to get the message ' WARNING: a problem with the cooling probe happened... return it for service.

    I can hear the fan is working but when I run the diagnostic tool for Toshiba, the CPU usage is at 50% and the fan to 0%, even in use high power (yes I changed both power settings)

    Any help would be much appreciated, because I really feel VERY bad after paying 2500 EUROs for a gaming computer I can not operate for its intended use.

    Thanks in advance

    However when I try to run all 3D graphics applications (and some flash feature facebook games) it blocks (auto-off)

    The laptop turns off automatically in order to avoid the damage hardware parts... which can occur due to a higher internal temperature...

    You mention that the fans do not work

    (use of fan is at 0% because my fans are now connected to the USB ports

    I suppose that the temperature rises and the laptop turns off because cooling fan use in 0%

    To me, it looks like a typical hardware malfunction and from my point of few service technician must verify and fix it... here in the forum, we can only talk and discuss possible solutions but finally the hardware problems should be fixed by engineers of the service...

  • Qosmio G20 - left cooling fan turns noise at startup

    After installing the BIOS ver 1.3, when the laptop computer powers until the cooling fan left running so strong, I thought it might burn or smoke.
    After windows has completely turn on the fan turns off after about 5 minutes.

    If I restart the pc, the fan is operating normally.
    Has anyone else had this problem, can I might get their hands on the older version of BIOS?
    It is pulling my hair.

    Hello Anderson

    Sorry, but your ad is a bit confusing to me.

    > If I restart the pc, the fan is operating normally.
    Restart or normally power is almost the same. Updates means you have noticed this fan cooling problem once right after the BIOS?

    Please watch carefully what happens the next few days. If the behavior of cooling is always strange I recommend you contact the service.
    In the end, one thing is strange. Qosmio G20 isn't the newest model and this version of BIOS is not either yesterday, but you are the first person who has noticed this.

Maybe you are looking for

  • Do not disturb (on request) does not work

    I have an iPhone 7 more with iOS 10.0.2. I had set up as NEW when I got it. I use the function do not disturb I SLEEP every night to block the incoming notifications apps and emails (including work with the application Outlook email). I leave the pho

  • Cannot activate 'Save password' how to fix?

    Recently, I installed Firefox on a new computer and proceeded to customize with bookmarks etc. I entered a password that the browser has stored, but not the box "remember passwords" is not only not controlled, but it is dimmed and cannot be re-enable

  • Looking to secure HDD STOR. E BASES - 2.5 "-1 TB with a password"

    Recently introduced a Toshiba 1 TB STOR. E basics external hard drive and seeks to use for backup purposes. I ' ts Plug and go USB and it been great so far but I'm looking to fix up with the protection or security of password software. I was wonderin

  • Recovery for a HP Touchsmart software

    610 - computer 5010f Touchsmart 64bits New, out of the box. Updated 7 ultimate and the tedious things updated. Received a message on a fix failed. System have disappeared. The d: System Recovery didn't work at all, there was no image. The alternative

  • Various consumables by region

    I bought a HP7510 all-in-one printer when I moved to China 3 years ago. In China the correct according to HP cartridges 862. I am a UK national and have returned to England and brought the printer with me. I have now purchased cartridges to the Unite