Qosmio G50 - stops at installing Windows 7

Similar Questions

• Qosmio G50-129 - cannot run Windows 7 SP1 on big HDD (1 TB)

  Hello

  I have a G50-129. I replaced the drive HARD primary with a 1 TB unit that works very well. Windows 7 Ultimate x 64 installed and all drivers are installed, too, including Robson drivers include the Intel Matrix Manager.

  I then tried to install Windows SP1 and I get a catastrophic failure. I also tried the Windows Update stand-alone Installer, which fails with the 0xc8000247 error.

  I've seen a number of sons, here and elsewhere, who cite drivers SATA Intel as requiring an update. The SATA controller seems to be the ICH9M-E/M SATA AHCI Controller.

  I downloaded the latest version (IATA89ENU.exe, version 12.0.0.49974) and still get the same problem.

  Can someone suggest anythying (outside to put the old drive in)?

  Hello

  I m not very well if the Intel driver is the problem.
  I think that the HARD drive is perhaps the reason for this.

  Try checking the HARD drive using the command:
  CHKDSK c:/f/v/r

  You must restart to start the audit.

  Then try the command: sfc/scannow

  Finally, see this Microsoft document provides a tool for analysis of system update fixes Windows Update errors
  http://support.Microsoft.com/kb/947821/en

• Qosmio F30-140: cannot install Windows operating system-> no. HDD

  I bought the Qosmio F30-140 and I can't install Windows XP from my original cd: / recovery cd works fine but it installs a bunch of stuff I didn't need if I want a clean install...

  so when I run my winXP cd Setup program I get the error message: "Setup did not find any hard drives installed in your computer..."

  Although I can run windows normally which is installed from the CD of restoration... I think it's something with the hard disk drivers.

  How can I overcome this? Thanks in advance :)

  Hello Sarunas

  There s nothing wrong! Nothing with HARD drive or other hardware!
  You have just installed the RAID driver
  The Toshiba Recovery CD contains the RAID driver and so you can install it without any problem.
  But the Windows CD contains no such driver and therefore the RAID driver must be installed at the beginning of the configuration of Windows installation procedure.

  Windows will ask you 3 RAID driver. The RAID driver, you can find on the page of the Toshiba driver. Download it on the floppy drive and connect the external USB FDD drive.
  From there, you will be able to install the RAID driver.

  Good luck..

  PS: Search in this forum of similar comments... you will find a large number of discussions on this topic...

• Should Qosmio G30-204 - I install Windows 7 32-bit or 64-bit?

  Hi people,

  I have a Qosmio G30-204. I've updated the RAM to 4 GB. She has Windows Vista 32 bit installed currently.

  I plan on installing windows 7.
  If I install Windows 7 64 bit, or it must be 32 bits?

  What is the difference between 32 bit and 64 bit anyway?

  Hello

  If you have upgraded laptop with 4 GB of RAM, you must install Windows 7 64 bit. On all the 32 bit OS, you can only use ~3.2GB reason for the limitation of the 32 bits.

  That's also the difference between 32 and 64 bits, the size of RAM supported. ;)

• X 500 - 10W QOSMIO webcam stop working after Windows updates

  Hello.

  I have a Toshiba QOSMIO X 500 - 10W PQX33E-00R00CIT.

  When I format my laptop and you reinstall the operating system Windows 7 Ultimate 64 bit, the webcam works perfectly.
  After I updated windows via windows update webcam stops working. Also with Windows 10 company LTSB. What should I do? Thank you.

  P. S.
  According to me, is just a problem of software, not hardware. The webcam works perfectly until I do the windows updates! ' * ' Microsoft!

  I find the problem. Do not install the latest version of Microsoft Silverlight. I hope that I formatted my computer for the last time!

• Qosmio G50 - 10J - cannot install Vista Ultimate again

  Hello

  I just bought a G50 - 10J with Vista Home Premium (German) installed. I tried to install Vista Ultimate Edition (in English) and formatted the C: drive (where vista was preinstalled); When installing, it freezes at the part "Complete Installation" and after waiting an hour, black screen appears and nothing changes (I tried 3 times and still had the same problem).

  Also unfortunately I don't have the recovery CD.
  Could someone please help me load Vista again?

  New portable Toshiba does not come with recovery DVD media and the recovery image is saved on the HARD drive. This means that the laptop owner must create recovery media only.
  Toshiba has designed a little reminder of recovery Toshiba.

  If you skipped it didn't create recovery DVDs before using the Microsoft DVD facilities you have a problem now. All you can do is to order a new copy. You can do so under the https://backupmedia.toshiba.eu/landing.aspx

• Qosmio G50 12 q - installation of windows 7

  Toshiba Qosmio G50-12 q - whit windows vista Ultimate 32 bit

  I could install windows 7 in replace of windows vista ultimate, unless they prove details incompatibility with device or another drive?

  The Toshiba site is written that the Qosmio g50 with windows vista Ultimate edition is compatible with the installation of windows 7, but a virtual test carried out on the microsoft site to verify compatibility or less has proved to a large number of incompatibility regarding the audio player to feel that they are unable to work once installed windows 7 etc.

  tank you

  Hi Valkyrie,

  I m a bit confused about your ad, but it turns out that the Qosmio G50 supports Windows 7 because all the drivers and tools can be downloaded from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• Qosmio G50-129 PQG55E - 64-Bit Windows 7 updated - update the BIOS?

  Hello

  I have a Qosmio G50 that I've upgraded to Windows 7 64 bit. My BIOS is unupdated for 6 months when I bought the machine.

  I went to update the BIOS, just to keep things updated, so I went through the pilot Online Assistant:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  And all information entered above, it provides:

  http://Support1.toshiba-tro.de/Tedd-files2/0/BIOS-20090312131718.zip

  After having unpacked and P0060v210.exe running, he extracted, and then said:

  "The [error] BIOS update is not taken in charge of operating system. No support for operating system or service pack is installed. "(Word to all my friends of Googling!).

  Toshiba has an update of the BIOS for the Qosmio G50 is supported on Windows 7? Specifically for the 64-bit? They need to fix this glitch which orders to download this file when it is not clearly supported by Windows 7.

  Also, I tried to run it in compatibility mode with Windows XP SP2 and it worked fine - but I was nervous about going through the update if it didn't initially support Windows 7, so I do not continue to the next prompt. Is it safe to do? Has anyone else in this situation he does without problems? I read the BIOS updates can go horribly wrong, if not careful, so I hesitate to update the BIOS by performing the update in compatibility mode when it doesn't support Windows 7 on its own!

  Thanks in advance for any help and Merry Christmas.

  Hello

  I agree with bljuzga_1.
  Because the BIOS is independent, it shouldn't be a problem with the update using Win 7 OS.
  The error must be linked to your installed Win 7 OS and not the BIOS bug.

  It would also be possible that your value added package for Win 7 is not installed correctly.
  This package contains the TOSHIBA components common driver which is an essential component of the Windows operating system. He will have to make the other original programming TOSHIBA works correctly.

• Qosmio G50 - HARD drive blinks every second

  Well, if she's here,

  I have a Qosmio G50. I installed WindowXP Pro 64-bit.

  I noticed the hard drive light flashes every second. I spent some time searching the net for a soultion. This led me to download a utility called "process explorer" from microsoft.

  This utility show me that the active process is services.exe. The properties of this service suggest that it handles "eventlog" and 'plugplay '.

  I realize that I can't go to the event log, nor what I want.

  Can anyone help?

  Thanks in advance.

  Hello

  The HDD led always flashes if it read all the data or written to the HARD disk.
  The service.exe (Service Control Manager) belongs to the Windows operating system and it s of Microsoft which is necessary and my knowledge background process, it cannot be disabled.

  Good bye

• Qosmio G50-12 q - built-in Recorder problem

  Hello

  I have the Toshiba Qosmio G50 - 12 q, with Window Vista Ultimate 32 bit with integrated masterizze Teac. Every time I try to master a cd or dvd the system tells me who does not find the masterizze.

  In the management system it falls perfectly installed and working correctly. Which is the cause of this is not continuous recognition of the masterizze?

  Whenever I have to reestart system newly

  Thank you for your answer

  Hello

  To be honest I really don t know you mean

  All I understand is Teac masterizze if you have a problem with the TEAC product, contact directly the TEAC.

• Qosmio G50 - cannot install the FM Tuner in Windows Vista Media Center?

  Can someone help me get the most out of Windows Vista media center with my new Qosmio G50.

  There is a tuner inside this laptop and I have the antenna and its plugged in. The drivers all seem to be installed but WMC tells me that I don't have the hardware to run FM stations and I can't make it work. Also, I can't record library but although I can't watch TV no problem at all.

  Someone out there have the answer?

  Hello

  Are you sure that your equipped G50 FM tuner to 100%?

  As I know a few models of G50 has been equipped with a tuner TV with antenna TV port that allows to connect a coaxial cable to this port to watch a TV program and then save.
  But as I said earlier, this feature is not included with all models of G50.

  Sorry, but I didn't find any info regarding the FM tuner.

• Qosmio G50 will not complete the installation of Windows 7 64 bit

  Hello world!

  I recently wanted to updated my Qosmio G50 - 12f 32-bit from vista to 7 ultimate 64-bit. I did a clean install: formatted the c partition.

  Everything seemed to work fine until the screen "Setup is preparing your computer for first use. At first, I thought it froze just would not go further. Back to zero (in all modes) would get the same effect.
  But to my surprise and pleasure, she managed to pass this point when I desperately wanted to wait long enough for a miracle to happen. But the problems remain. The configuration process is right! REALLY! slow. I could painfully spend the first screens, like enter the name of the computer, activation screen, modes of security, but with a very long wait time between each. And every time he reaches this final screen of security modes that she would suddenly go to a BSOD:

  Driver power state failure
  STOP 0x0000009F (0xFFFFFA800193DD70, 0xFFFFF80000B9C518, 0 x 0000000000000003, 0xFFFFFA80029C8610)

  Please, anyone have any ideas on how to solve this problem?

  Of course, there should be a driver problem, but how do I update all the drivers without operating system running? I've seen such a feature in the repair of the installation DVD section, but it accepts only .inf files.
  And I can t find those anywhere on the toshiba support website. Only the .exe that you run from your operating system that is already running.

  In any case the Qosmio G50 was not as incompatible with 7-64 bit. So I'm a little confused here!

  Please help ^ ^

  Hello

  I want to ask you about the Windows Vista Dvd disc. Is - this original type one or more of the Assembly?

• Qosmio G50-10 q - driver has stopped responding and has recovered

  My father has a Qosmio g50-10 q for more than a year, and as he bought it he could not see the videos with a resolution more than 640 * 480 and preview of the photos by right click on them and select Preview.

  The problem exists on the operating system preinstalled Vista and today Ive tried to install an operating system windows 7 Professional 32-bit edition.
  The problem is he stil.

  I downloaded the drivers from the official website of toshiba.
  After a lot of testing, I downloaded nvidia nvidia drivers but the problem is exactly the same.
  I am a COMPUTER expert, but I've never found a problem not solved like this.

  I can not even go on youtube and watch a video in full screen.
  Whenever I try to play a video, the screen will start to Flash and then the video becomes black and a notification that says "display driver stopped responding and has recovered".

  I can't even see the video demo in the video folder of windows (wild life).
  And the situation really strange when I click with the right button on an image and select Preview. It shows a white or a black image.

  If I press the button of the screen adjustment, the image appears, but when I go to the next pixture I can't see him again.
  If I choose to see a presentation full screen, I can see all normally.
  Its really frustrating for a laptop of this award and I don't know if this problem is drivers or the 9700 M GTS was defective from the start.

  I hope I can find an answer here before I return it to Toshiba

  Thanks in advance

  Hi mate

  I had the same error happened on my laptop satellite.
  The display driver crashed and recovered
  I've updated the display driver and this has solved my problem.

  In your case, it of really strange that you can not watch movies in 640 * 480 or higher
  Maybe you need to update the BIOS. Check if there is a newer version
  If so, then an update of the BIOS would be worth a try

  Sorry, but I have no other recommendation for you outside the update driver as mentioned it has helped in my case

• Qosmio G50 - Windows does not shut down without memory stick inserted

  I have a Qosmio G50 running Windows 7. The pc does not stop unless I have my USB stick inserted. Without the USB, I can tell the pc to stop. Without the inserted stick, the pc will say that it stops and remains on the screen closed for 10-15 minutes and then restart.

  However, as soon as I put the USB into the USB port, the pc will stop within 2 seconds.

  It is not easy to understand the situation and explain why this happens.
  Qosmio G50 is not latest model cell phone, so I can't imagine that this strange question comes on the first day.

  Something like this can be done with the factory settings. The configuration, preinstalled software, background running applications and processes on your Qosmio OS are not known to us is not easy to help you with this.
  Somehow, I think that something running in the background blocks of the system. Unfortunately, I can't say what that would be.

  Check a bit.
  By the way: have you noticed the behavior even if you try to use standby or hibernation mode?

• Qosmio G50 - 12U - display stops when 'Welcome' appears

  Display U Qosmio G50-12 problem

  When I start the computer (Windows Vista) start page shows Qosmio and the boot process proceeds, but around when the welcome message the display panel stops.

  When I connect an HDMI cable between the computer and the TV, the display on the TV.

  When I hit FN + F5, the display fails to return to the display of the computer Panel.

  If I stop and restart the computer several times the m slipped by pot luck the computer display OK. But then, I am reluctant to shut down the computer that I lose the display again.

  Hello

  It seems that the internal display has started to malfunction.
  I think that its display problem, because the video output to an external monitor/TV is working properly.
  This would mean that the graphics card is OK.

  If the graphics chip is OK, there is just a game (or two) that might not work: his Billboard or a part between the monitor and the motherboard. something like a cable or an FL inverter, but I think that its display.