Qosmio G50 - Windows does not shut down without memory stick inserted

Similar Questions

• Windows does not shut down correctly, please choose an option (safe mode, safe mode with network, start windows normally

  Original title: battery

  When the battery dies on Windows 7 Home premium, what makes the look of the laptop screen as to everyone with the same computer? (IE black, dim and then black, dim and white and then black, Sun & blue, etc.)
  And you always get the "Windows did not shut down correctly, please choose an option (safe mode, safe mode with network, start windows normally)" Note?

  It could be a hardware problem, so it is best to contact DELL or a local technician if the problem persists.

  As a work around, I suggest to update the drivers of the computer display and check if it makes a difference.

  Download the drivers from http://www.dell.com/support/drivers/us/en/19/Product/latitude-e6410

• HP pavilion n003tx: MY HP laptop does not shut down properly after installing windows 10

  My HP laptop worked perfectly with windows 8.1. After the upgrade to windows 10 is not shut down properly. Power and wireless signals is always bright and also consumes the battery.  I need to press the button for at least 4 seconds power in order to stop completely.

  Is there any possibility to get rid of this problem

  Spoiler (Highlight to read)

  

  

  When I disabled the quick start in power options > it works very well with a certain delay before start-up

• Send a message that the computer does not shut down properly after the resumption he out of the hibernation mode.

  My laptop has Windows Vista and is about 3 years old.  It is in excellent shape, but recently it has been brought to my attention that whenever I put into hibernation mode and resume, I receive a message that indicates that the system or computer is not stopped correctly, and so I have to restart the computer.   Why is this happening? and any solution for this?   Thank you in advance.

  Hi SuzanneSchwester,

  Thanks for posting your query in Microsoft Communities. It seems that you are getting a message that the computer is not shut down properly after the resumption he out of the hibernation mode. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         What is the brand and model of the computer?

  Follow the steps in the article.

  You have problems after you resume Windows Vista from sleep or Hibernate computer

  You can see these articles for more information:

  Solve power problems

  Turn off a computer: frequently asked questions

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• Windows XP not shut down - hangs at shutdown

  Original title: Windows XP is not closed... Pls help. XP SP3

  Hello

  When I shut down my laptop (HP Compaq 6515 b) in the menu start, stop. the locking system appears and does not stop completely. He goes into the mode 'sleep' but is not turned off. It remains forever and nothing happens after that. I then close at length by pressing the power button. pls help on this issue, as many of my programs do not react after the start of this process. I have a XP SP3 loaded on the PC. Yum help

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/308029

  It will be useful.

• Qosmio g50 screen does not

  I have a Qosmio G50. This morning when I turned on the screen has come for a second or two, has shown the Qosmio logo, then deleted. I spent the morning trying to solve the problems. I removed the bezel and checked that the sons were not cowards.
  I've attached another screen of the laptop that works fine.

  Sometimes the screen, so I don't think that the problem is the screen itself.
  It will be displayed for about a second if I close the lid, and then open it. He will then blink for a second and then drain.

  Also sometimes if I start with the other attached screen, the laptop display indefinitely.

  Anyone have any ideas? It might be the button that turns the screen on and off when the laptop opens / is close, but I don't know where to check.

  PS: The filter of profanity on this forum is total garbage. As if I was not quite frustrated without having to cut and paste my post paragraphs trying to isolate a few expletives ghost.

  Post edited by: redbrigade

  I have the same problem with my G50. According to me, if I have the brightness of the screen under level 5, there is no problem.

• Qosmio G50 - 12F does not illuminate

  I got a Qosmio G50 - 12f
  No.: PQG55E-04C02YFR

  The problem is: when I plug it into the DC I got a white light on the photo card dc and a light orange on the picture of the battery.
  When I turn on the laptop, the white light turn off for 1 second (maybe) and return to the original position and the battery light turn off permanently.

  I tried to find answers on the web. What I find that is perhaps due to the power: dc or cable jack connector power (the one that goes from the dc Jack to the motherboard or the power Board of the battery under the mousepad...

  Well, I lost m

  Does anyone have the answer? I want to fix it myself.

  Thank you

  What happens when you remove the battery and try to start the laptop with DC power only?

• Windows was not shut down properly due to the system not responding do not. How do I fix this problem?

  When I start the laptop it says that windows is not properly and start in normal mode, safe mode, etc. when doing whatever it is above, it takes a while and then the screen make dark with the single mouse arrow and the laptop still does not start at the top. What to do to fix this problem?

  Hi lana02,
   
  -Remember to make changes to your computer after that this problem started to happen?
   
  Try the steps listed in the articles below and check if it helps you to fix the problem.
   
  Computer stops responding with a black screen when you start Windows XP
   
  Advanced Troubleshooting for General startup problems in Windows XP

• The printer door does not shut down after printing

  HP Envy110 model D411c.    I printed out a page, the door opened, the extension arm is released, but was partially blocked. The printed page in the status bar and was recovered, the extension arm retracted, but the printer door has not closed completely.  I printed the pages since then, everything works well except for the door.  It closed partially and stops.  No warning appears on the screen.  I have to close to allow the doors close. Help!

  OK, I have a solution thanks to the autonomy and the helpline UK. At least, it works for my desire 120th All In One.

  The door / cover will always return to the position where the task was started. I don't remember to start work with the Panel in the raised position, but apparently I did.

  Solution: With the printer, gently push the door closed. Now print or copy. As the work that started with the door closed, he will return to this position even when the work is completed.

  Why oh why is anybody's guess. Good luck!

• No battery indicator and the laptop does not shut down after closing the lid

  After returning from my lapyop return to caused by a virus factory settings I can't have my defiler of battery on my taskbar

  and also I got my lap top programmed to close on the cover but can't find where to put in place

  Hello

  I suggest you to visit the web link below to change the change the power button cover option.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-what-happens-when-you-close-your-mobile-PC-lid

  Once you have visited the link above, try the method to display the power plan options and then search forcover and the power button and choose your preferred option.

  Hope the helps of information. Please post back and we do know.

• PC HP ENVY 15 x 360: hp laptop does not shut down when I click on stop.

  I wanted a HP for almost two and it will never stop by pressing stop.  Screen goes black but the fan continues to run.

  Only way to get it to stop is to hold the power button / stop for 6-7 seconds

  Hello

  If your laptop has an Intel chipset, try the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close the open windows and restart the laptop.

  When windows has reloaded, download the driver directly from Intel IMEI on the following link, unzip the and run the installer.

  https://Downloadcenter.Intel.com/download/26127/Intel-management-engine-consumer-driver-for-Intel-nu...

  Once the installation is complete, restart the laptop.

  When the machine rebooted, re - activate the quick start and restart the computer once more - let Windows take over completely for a few minutes before checking.

  Kind regards

  DP - K

• Windows Media fast does not open when the Memory stick is inserted in the port

  I got the virus on my system, and had all of the programs deleted and reinstalled.  When you try to download off my memory stick the cursor blinks only with no prompts to download photos.  I had no problem with this program before the virus removal.  Help, please!

  Hello

  Install the drivers for the memory stick on the manufacturing site also perform a clean boot before installing.

• Windows vista (Home premium) is not shut down or restart

  The computer (with windows vista edition Home premium); NVIDIA Geforce 8400 M GT GPU) is not shut down or restart. I suspect it's due to updates of windows do not. The error code that is more common that I've seen is A 80071, 91, and then other codes of error like 80071A2C. Here are updates of security for vista and internet explorer. Please help on this issue so that the pc starts shutting down as usual.

  Thank you

  "md123456" wrote in message News: 0d2c53df-b4e6-41b0-8773-211803475406...

  Thank you very much. Would be a new instal OS solve these problems?

  If you mean a new facility on a reformatted drive or a system recovery using recovery of the manufacture process, Yes, certainly, unless it's a hardware problem - but then you learn nothing about what caused the problem in the first place and so how do I prevent it from happening again.
  WRT your mistakes: -.
  1. nothing to worry about, as most of the machines do not have parallel ports today (unless yours does?)
  (2) it is difficult to talk about this, without more details-, but because they say "dependants", rather that "unload", it can probably be ignored.
  (3) it seems normal - I've seen a lot of PC with this error, and apparently nothing wrong. -It is important only if you are connected to a domain server
  (4) the service (I think) is a result of system crash, rather than a cause of the grip.
   
  It seems that the cause of this will remain a mystery.
  My earlier concern about SR doesn't work not just because of problems still standing stop - but back your data first, so that if the worst happens and you cannot start the system later, you can go to plan B.
  As Lorien says, try a back system restore to before the problem started - although at 2 months, I would worry about the stability of the system later. Since you already said that you are willing to do a reinstall if necessary, give it a whirl :)
   
  HTH
   
   
   
   
  
  --
   

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC

• 850 - 009na M1Z34EA #ABU: CPU fan for the 850-009na feel like Phoenix does not turn down after the power - on self test unless the BIOS is entered

  Hello

  I have posted responses to other posts on this topic, but thought I'd start a new thread to gather my conclusions. I'm sorry for a trial

  This PC is virtually brand new (only a few weeks now) and otherwise perform exceptionally.

  Basically, if the machine is disconnected from the power grid (i.e. the power is off at the plug or the power cord removed), when the machine is supplied then the CPU fan turns over 2000 rpm and stays there. All the other PC that I do this too, but the fan will slow down after turning upward. I know that this is done as part of the POST to check that the fan is running.

  If I go into any installation of seed, start-up or BIOS for example (i.e. by pressing ESC or F10 etc.), the fan will slow down immediately up to 700 rpm. It will stay like that until the next time the machine is started against the cold. If I shut down the PC - watch or stop - but do not cut the power supply, then the next time the machine is started, the fan is still about 700 rpm. It is not to turn up to 2 k + RPM when lit.

  As soon as I unplug, then the next time the PC boots, it will turn to the top and I have to repeat steps - off, boot, enter the BIOS, exit and continue. It is something to do with the cold start.

  Note that I don't have to do anything in the start menu - I for example go to the BIOS settings, exit without saving the changes, and the fan will still slow. It's going in the boot sector that slows down the fan.

  When the PC started out-of-the-box, I opted for the upgrade to Windows 10 during installation. I have read in various places that people had experienced after the upgrade, so I reset the machine to factory settings (Win 8.1) and have not upgraded, but the problem persisted. However convinces me that Windows 10 has been removed completely, as when I went to restore the backup image (i.e. dating back to what I had before the factory reset) there are references to 10 Windows (for example, it says 'Continue to Windows 10' as well as various food options). I do not understand UEFI so I don't know if that was involved.

  I tried to change the power plan options "Processor power management-> cooling system strategy" on the liabilities side, but no joy there.

  I think that the fan and sensors work, based on the findings below. These readings of temp and fan are taken from AIDA64

  After starting cold (current was cut, without entering the BIOS), machine runs dry without load

  

  Exactly the same thing--starting in cold, but go in the BIOS, do nothing and continue. Once again, no load

  

  This is after power off and resarting, but to let the PC network

  

  After the above, I used Prime95 to put the CPU support (use of 95-100%), and after an hour, the readings are:

  

  Note that even so, the fan was not particularly strong, but it's at 2222 rpm as in the first reading.

  If I play at 4K (the whole point of the PC ) the CPU so far got very warm, the GPU is but his fan turns up as planned.

  In conclusion, it seems that the POST has a problem because it does not slow down the fan after the test.

  I can live with let the machine always plugged into the sector (for example, most of the time) and I guess that's what most people do, but I would like to know what the problem is (for example if it's really something 10 Windows, or a bug in the BIOS/UEFI)

  Thank you very much!

  John

  Explain you a lot of people who maybe have returned their system immediately because of this? Others might judge normal sound. Not irritable average is not coming here to complain. Others might judge her so little. They simply don't like. You will never convince me that is not a BIOS problem. As the problem resolves itself when you enter manually each time. It can be reproduced every time.

• Qosmio X 770 does not connect to my wireless modem

  My Qosmio X 770 does not connect to my wireless modem. The without line on the computer turns on and another computer is able to connect to the modem without problems. The Qosmio connects to the modem via a cable. The computer sees the modem and the modem is next to the computer, so range should not be a problem.

  Would help reinstall or update drivers wireless and if so, how can I do this?

  I am running Windows 7.

  Great! Thanks for your comments!