Qosmio PX30T-OOM: Questions about specifications

Similar Questions

• Qosmio G30-149RU - Question about hardware upgrade (CPU)

  Hello

  I have a toshiba qosmio G30-149RU and my question is possible to make these changes?

  Intel® 945 PM Express chipset

  Intel Core Duo T2500 to Intel Core 2 Duo T7600 processor
  2x512MB DDR2 533 2x2gb DDR2 667
  2 x 100 GB 5400 RPM RAID HARD drive with 128 gb SSD + 500 GB 7200 RPM HARD drive

  one last thing, my qosmio I have NVIDIA GeForce Go 7600 256 MB, but I don't know if it is possible to change or not. If possible, what video card will be the best?

  Sorry for my bad English and thanks for help :)

  P.S.: I got to the House 128 GB ssd and 500 GB hard drive, but others, I'll buy. CPU nearly $ 100, ram near $ 40...

  > one last thing my qosmio I NVIDIA GeForce Go 7600 256 MB, but I don't know if it is possible to change or not. If possible, what video card will be the best?

  No, the graphics card can not be upgraded

  What you can do, it is memory and the upgrade of the HARD drive. This should be very easy and should cause no serious problems.

  Upgrading CPU is little tricky.
  On the page of the Ark from Intel, you can check what are the processors supported by Intel 945 PM Express chipset
  http://Ark.Intel.com/products/27858

  These are:
  Intel Core Duo L2300 of processor (Cache 2 MB, 1.50 GHz, 667 MHz FSB)
  Intel® Core Duo L2400 of processor (front-end to 667 MHz 2 MB Cache, 1.66 GHz, bus)
  Intel® Core Duo processor L2500 (1.83 GHz, 667 MHz FSB, 2 MB Cache)
  Intel® processor Core Duo T2050 (1.60 GHz, 533 MHz FSB, 2 MB Cache)
  Intel® Core Duo T2250 of processor (Cache 2 MB, 1.73 GHz, 533 MHz FSB)
  Intel® Core Duo processor T2300 (1.66 GHz, front side bus at 667 MHz, 2 MB Cache)
  Intel® Core Duo T2300E of processor (front-end to 667 MHz 2 MB Cache, 1.66 GHz, bus)
  Intel® Core Duo processor T2400 (1.83 GHz, 667 MHz FSB, 2 MB Cache)
  Intel® processor Core Duo T2500 (2.00 GHz, 667 MHz FSB, 2 MB Cache)
  Intel® Core Core Duo T2600 (2.16 GHz, 667 MHz FSB, 2 MB Cache)
  Intel® Core Duo processor T2700 (2.33 GHz, 667 MHz FSB, 2 MB Cache)
  Intel® Core Duo processor U2400 (1.06 GHz, 533 MHz FSB, 2 MB Cache)
  Intel® Core Duo U2500 of processor (Cache 2 MB, 1.20 GHz, 533 MHz FSB)
  Intel® Core Solo T1300 processor (1.66 GHz, front side bus at 667 MHz, 2 MB Cache)
  Intel® Core processor Solo T1350 (1.86 GHz, 533 MHz FSB, 2 MB Cache)
  Intel® Core processor Solo T1400 (Cache 2 MB, 1.83 GHz, 667 MHz FSB)
  Intel® Core processor Solo U1300 (1.06 GHz, 533 MHz FSB, 2 MB Cache)
  Intel® Core processor Solo U1400 (Cache 2 MB, 1.20 GHz, 533 MHz FSB)
  Intel® Core 2 Duo Processor T5500 (1.66 GHz, front side bus at 667 MHz, 2 MB Cache)
  Intel® Core 2 Duo processor T5600 (1.83 GHz, 667 MHz FSB, 2 MB Cache)
  Intel® Core 2 Duo processor T7200 (2.00 GHz, 667 MHz FSB, 4 MB Cache)
  Intel processor Core 2 Duo T7400 (Cache 4 MB, 2.16 GHz, 667 MHz FSB)
  Intel® Core 2 Duo Processor T7600 (2.33 GHz, 667 MHz FSB, 4 MB Cache)
  Intel® Core processor Solo U1500 (Cache 2 MB, 1.33 GHz, 533 MHz FSB)
  Intel® Core 2 Duo processor L7200 (Cache 4 MB, 1.33 GHz, 667 MHz FSB)
  Intel® Core 2 Duo processor L7400 (1.50 GHz, 667 MHz FSB, 4 MB Cache)
  Intel® Core Duo processor T2350 (1.86 GHz, 533 MHz FSB, 2 MB Cache)
  Intel® Core Duo T2450 CPU (2.00 GHz, 533 MHz FSB, 2 MB Cache)
  Intel® Core processor Solo T1250 (1.73 GHz, 533 MHz FSB, 2 MB Cache)

  However, there is a question again about the BIOS support. You need to test everything.

• Qosmio F20-136 - Question about installing Linux in virtualization

  I have Windows XP MCE 2005, Ubuntu 8.10 & openSUSE 11.0 on my laptop F20-136 (triple boot).

  I intend to:

  0 save the partition Windows XP MCE 2005
  1. remove all the.
  2. install openSUSE w / Xen Virtualization.
  3. then create virtual machines to run backup Windows XP MCE 2005, new 8.10 of Ubuntu and other linux distributions.

  The questions are:
  1 F20-136 requires Windows XP MCE 2005 as its main operating system?
  I ask this question because I noticed that when I disable the builtin speakers in XP, I can't turn them on when I boot in openSUSE.
  So it seems to me that XP with Toshiba drivers and other software on Toshiba system has complete control over the material.

  2. will it affect Qosmio player?

  3. is there any other software virtualization is better than openSUSE w / virtualization Xen?
  I know MS Virtual PC, VMWare, VirtualBox.

  Please note that probably I don't want Windows XP MCE 2005 + virtualization (which will be my last option). I would like to have virtualization using Linux, openSUSE preference as he impressed me with his ability to (fast start/stop<= 45="">

  After further investigation, I think of virtualization VirtualBox which offers a bare metal solution, i.e. without operating system host is necessary.

  VitualBox (hypervisor) layer can be installed directly on the hardware, and then the virtual machines can be created for different operating systems.

  In this spirit, I have queries:

  Say I back up the entire hard drive (just in case the plan everything is the draw, I would restore the image of the entire hard drive), delete the contents of the entire disk, install VirtuaBox.

  1. let Qosmio player as well, which by my understanding, is 10 GB of free space somewhere on the hard drive?

  2. I would be able to install XP MCE recovery disk to create a virtual machine?

  Thank you
  Amol

• Qosmio x 500-Question about 460 m nVidia drivers update

  will there be an update for the driver I tried to play the beta of battlefield 3 and he needs the new driver that is located on the nvidia site to even start the game so I checked it is not there, and toshiba, a knowledge when it comes out

  Hello

  Someone here in the posted forum that it has received a response from Toshiba and they would update all the drivers available as soon as they have been soundproofed to work properly.

  In the meantime, I think you could try some pilots of 3 third as laptopvideo2go.com pages as described in another thread on the Qosmio X 770
  But as far as I know the use of these drivers is always at your own risk...

• Qosmio G20-118: Questions about playback of movies, TV, bluetooth

  Hello.
  people I m not very good with computers and need your help.
  my mother gave me a qosmio g20-118 and I have some problems with it (never liked laptops that much, but this one is beautiful ;):)

  1st - when watching dvd movies, I observe that when it comes to an image of the sky or clouds, I see dots on the screen. This happens also with you guys? could this be a problem in high definition? Even on the film "nilo" which comes connected to media player... when it comes to an image of an egypsian walk to the horizon on the stones... If you look at the blue sky, the definition is not so good... Why is this?
  Despite this problem watching movies top it s super...
  all what I can change to make it better?

  2nd - I ve tried to watch TV and I can´t. I m Portuguese and have cable TV. from what I ve read the only thing I have to do is conect the cable antenna to the computer with the adapter tv right? It is a message that the signal is weak. can someone help me here?
  and how do I adjust a channel? I Don t see where I can grant automatly or manually!
  (maybe a Portuguese user can help me if West one here)

  3. how to use the bluetooth? my cell phone has bluetooth and when I turn on the bluetooth of the phone and activate the bluetooth of the qosmio one of them recognizes anything. I click on "bluetooth settings" and 'new Connection', and I got a message saying bluetooth is not ready. What should I do?

  If someone could help me that would be great. Sorry for the big testemonial; 9
  Susana

  [Edited by: admin on 14 January 06 08:16]

  Hello

  First of all, you are right. This very nice laptop s. I wish I would have a.
  Good on your problems:

  1.), you should try to change the display resolution. It would be very interesting to know if the black dots remains on the screen. In addition, I put t think that it s a pixel dead issue because you don t have problems if watch you movies.

  2.) have you used a Qosmio Player or a MCE? You should try to start the Qosmio player and try to launch a new search for TV channels. In the manual, you will find a detailed description of a connection and the use of the Q drive

  3.) have you activated the Bluetooth with FN + F8 key combination?
  Please check this post how to use a Bluetooth device:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=5710&MessageID=19581#19581

  Good bye

• Qosmio G30-161: Question about D port and HD signal

  Hello
  If someone knows if I was to connect the cable I got with the computer laptop qosmio, which is D connector to SCART. If I had to get a Scart to component and connect the two euroconnectors and an adapter it'll work.
  I'd get the signal high definition

  Hello

  Please also check this announcement:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=12993

• Qosmio F20-136: Question about upgrade memory

  I purchased a Qosmio F20-136 with 512 MB of on-board RAM, but wanted to update, so bought additional 512 MB RAM (DDR2) for a total of 1024 RAM.

  I said global PC sales guy I wanted only if the laptop has two slots.

  I took the cap of the other week and only 1 slot is visible to the naked eye.

  I do not go any further.

  Does anyone know if there are two slots or that one meaning that I have to buy a bar of 1 GB DDR2?

  Thank you very much

  Hello

  The Qosmio support two memory locations, and it should be possible to use 2 sticks of memory. You can upgrade the memory for max 2048 MB (2x1024Mo).
  The locations of memory, you will find at the bottom of the unit. To remove the small cover that secures the slot. Also see the user manual. You should also find a detail.

  PS: These modules of memory are supported:

  DDR2 400/533 256 MB (PA3389U - 1 M 25)
  512 MB DDR2-400/533 (PA3412U - 1 M 51)
  1 GB OF DDR2 400/533 (PA3411U-1M1G)

• Qosmio G40-108: Question about CPU upgrade

  Dear friends, I am an Italian man who asks if it is possible to change the CPU (T7700) of my Qosmio g40-108 with the new T9300 (like USA G45-AV690)

  All the best
  David

  Hi david

  Please understand that mobile technology is completely different Office of PC technology and motherboards are all just different.
  Upgrading the CPU's especially not possible or very risky for other reasons.

  A main reason could be overheating; as you know the stronger CPU would produce more heat and this could lead to a higher temperature and finally to overheating...

  In addition you BIOS was not configured for other processors so it possible s that your laptop does not start after such update!

  See you soon

• Re: Qosmio F10 died - question about warranty repair

  Hello

  I have a Qosmio F10 to fix and it does not start.
  I think that tge THAT GFX disappeared.
  I heard that there is a free warranty for this.
  I can fix it for free?

  Thank you
  Neo-Tech

  Hello

  I didn't hear or read that a laptop would be repaired for free if the guarantee is not valid, it is new to me.
  In any case, the Toshiba authorized service provider in your country might help in this case.

  I want to say that your laptop initialize not but it s do not know exactly what s wrong
  You said that a GPU is dead are you sure to 100% or it s a guess? I think that it s an assumption.

  In my opinion it of not easy or not possible to tell what's exactly wrong without putting hands on the device. You know what I mean

  Then call a local ASP and ask for later handling cordially

• Question about specific scenario

  Greetings,

  I am beginner in vmware vsphere, I wanted to ask 2 questions, 1 is I can play with an ESXI via vsphere client without vCenter? is this possible, and what I'll be gone if I don't installed vCenter.

  from the scenario 1 2ed I want to create two seprate virtual network 1 have 2 virtual machines with each own public ip and second network (7 VMs) 1 VM have a public ip address and got the rest own private ips how can I do? Note: I created two virtual machine port group and two vswitch via vsphere!

  You need to just add one or more physical (vmnic) host network interface cards to the vSwitch and connect it to a physical switch or router.

  André

• Qosmio G30-201: Question about video in function

  New, proud owner of this superb piece of equipment!

  I'm stuck on one thing - I can't seem to be able play disk or configure anything in which is the 'video-enter' registration. Manual describes how to connect to a VCR bridge, but once connected I cannot view anything on entering the port. Nothing in the WMSE, nothing in the creator of Invervideo, nothing in the control panel to activate.

  Any ideas out there?

  Appreciate any help.
  Thank you
  Andy

  Hello Andy

  Who, IN the port that you are using?

  By the way: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=18960

  Maybe using.

• Question about the temperature of the Qosmio X 500

  Good afternoon.
  I am the owner of the laptop Qosmio X 300 for about two years. I tried to change the laptop on the Qosmio X 500. Toshiba Qosmio X 300 is very hot when I run the games high performance, so I was interested in the question - if the X 500 overheating problems or not? Anyone can publish indicators of temperature sensors?

  Post edited by: Erangel

  Hello

  To be honest I m X 500 owner but no it s nothing unusual that a temperature increase to a higher level all-in game.
  It is a normal behaviour for laptop.
  The GPU and CPU are stunned with the highest performance while playing a game, which means a lot of heat will be created.

  This will happen to all the laptops that are created for game purposes and you should not be worried about it

• Questions about the management of specific nodes in different hierarchies

  Hi all

  I have a question about the specific management of some particular set nodes, which are located in different hierarchies within a same version.

  I want to know if there is any editing made to certain properties of these specific nodes or if the nodes are deleted/moved/edited approval to be triggered for the data manager.

  or should not allow users to edit (adding/moving/deleting/changing property values) or those specific members.

  
  

  According to my understanding of the nodes of domain prevents the removal of nodes, but I don't want my Member prefix/suffix, domain is the only way to prevent the change.

  
  

  
  

  
  

  Thanks and greetings

  Madhu
  

  We have an obligation to not allow a node to remove or deleted without the approval of the admin, so I created a Boolean property AllowDelete is false, which is substitutable, default and is available only in a category of property Admin, for which most of the users do not have access.  Then, I created a validation of PropRemove with an error message that tells the user to contact a user admin to remove or delete the node.  The admin can change the AllowDelete to true, then can either remove himself or to allow the user to do.

• Questions about a relationship between InDesign and S1000D specification

  Hi I have a few questions about a relationship between InDesign and S1000D specification. First, InDesign does not meet an S1000D standard? If so, what questions are supported in InDesign as "S1000D issue 4.1'?." In addition, inflicts InDesign interconnected with CSDB through any creative or other module. I'm looking forward to get useful answers and thank you in advance.

  I agree with the screen name of Test in this regard. Technical publications represent only a small percentage of the market of InDesign. And it is likely that the authors of these publications InDesign may not have heard of the S1000D specification.

• Qosmio E10: Question about PX1211E-1TVD Toshiba DVB - T USB Tuner

  Hey all,.
  While the analog TV tuner that is inside my Qomsio E10 is OK for now, I'm looking forward to get a Digital Tv Tuner USB from Toshiba adapter.

  HTTP://UK.COMPUTERS.TOSHIBA-EUROPE.COM/CGI-BIN/TOSHIBACSG/INDIVIDUAL_OPTIONS_PAGE.JSP?SERVICE=UK&ACTION=SHOW _ATTRIBUTES & OPTION_ID = 109331

  And I have 2 questions about this article on Qomsio:

  1 MCE (version 2004 on E10) will be able to use this DVB - T Tuner for me to record digital programs in MCE?

  2 "Intervideo WinDVD Creator 2 Platinum for Toshiba" (comes with E10) will be able to see the PX1211E-1TVD so?

  If not, what software could be used to record DVB - T programs?
  Later,.

  Alcahest

  Hi Alex

  You will be very happy if someone can give you a precise answer to your questions. I didn't see this before, but it will be interesting to know if it works with my Tecra laptop.

  If seek you information please let me know how it works. Thank you!