Qt Creator and waterfalls

Similar Questions

• Qosmio G30 - video input using WinDVD Creator and WinDVR 5 problems

  Hi all
  My G30 (PQL32L) supplied with Windows MCE. It has preinstalled WinDVD Creator 2 and personally I install WinDVR 5 (application of part 3 came with my Plextor ConvertX PX-TV402U PVR).

  Problems:
  1 WinDVD Creator 2: failed to set the TV system. I plugged my video source via the video cable (yellow, white, red) provided and connected to the AV-in port. I chose TV on the HARD drive for the new project. Default WinDVD defined as NTSC but my TV system is PAL. Therefore, input video quality is blurry and cut in two. Once I changed the setting in the software of PAL, the video screen turned black and no response. I have no problem with Qosmio Player with the same configuration of the connection.

  2 5 WinDVR: Application can not start correctly (hang and cannot complete the program) I to my Plextor ConvertX PX-TV402U PVR TV source, then connect it via USB2.0 for G30. My ConvertX works in my office, but failed with the G30. The application cannot start properly and hung. No response yet I'm trying to complete the program, but the screen was always there. When I try to stop my G30 then Windows MCE hung at the "Closing Windows" screen. I have to stop by pressing the button. ConvertX being operation USB cable, it is not achievable in Qosmio.

  Can someone help to solve these or give advice?

  Fine thanks
  Samuel

  Hello

  I copied the film on my camcorder for Qosmio G30 (WXP MCE) without any problem and subsequently created the DVD using Ulead moviefactory program. I also tested it with VHS-recorder. Once again without any problem!

  My camcorder was connected with firewire cable and it has been recognized correctly. VHS-recorder was connected with the aerial cable simply. I was able to record sources using Qosmioplayer (it was just to test because I'm interested, how it works). Movie from VHS-recorder was also possible to record using Media Center Edition.

  I know I also tested it with pre-installed Win DVD Creator but camcorder has not been recognized as usual. If I remember well I put the TV source and that the camcorder is recognized correctly. To be honest I don't like this Win DVD Creator and I have not tested properly.

  So I would like to know what your video source and what you hear in AV-in port.
  Please tell me exactly what cable you use for audio/video data transfer and exact port on your Qosmio laptop?

• Satellite A200-1AE: Toshiba Disc Creator and DVD MovieFactory missing after update

  I've updated Toshiba Satellite A200-1AE from Vista Home to Vista Enterprise, but now I can't find TOSHIBA Disc Creator and DVD MovieFactory for TOSHIBA software.

  No idea how to get this software?

  Thanks, Bojan

  It seems that your Vista upgrade crashed the previous settings and therefore applications such as TOSHIBA Disc Creator and DVD Movie Factory has disappeared

  You search anywhere?

• Kernel and waterfalls

  Hey

  got a little confused by core and waterfalls

  of course, there are a lot of other things around, but did, I got the idea?

  Yes. QT only adds features to c ++, similar to Boost or similar.

  You can compare it to jQuery and javascript, it of still the same language but offers more utility.

• NB200 - Recovery Media Creator and drive HARD USB

  I just bought a white NB200 and noticed that it does not come with a DVD of Windows 7 in case I ever need to install.
  I was informed by the seller in the store I could save a copy on a USB key using a recovery disc writing.
  I assume that "Recovery Media Creator" is the best way to do it.

  I booted up and it said that it will be 6.7 GB. I don't have a USB this size, but have a portable hard drive (250 gb) with 120 GB to spare.
  Even though I can view the drive in Windows Explorer / workstation, the program of recovery media says ' Please insert a USB drive with greater than 6.7 GB memory ', whenever I click on the create"" button.

  If anyone can help?

  Hello

  I doubt that you can use the USB HDD to create a recovery disk image.
  The Toshiba recovery disc creator has been designed in order to create a bootable recovery disk!
  It has not been designed for sure the image of Toshiba on the HARD drive!

  So if you want to use the Toshiba recovery disc creator then you must buy a USB CD/DVD drive that can burn the recovery image on a DVD

• Recovery Media Creator and USB

  I try to use "Recovery Media Creator' loading on a 16Gig USB drive.
  The program insert me a greater than 12 Gig USB flash drive ask what I do.

  He said while the drive will be formatted and then comes up with "Format Failed (Error Code: 040E49-04-00000000)" and the USB key becomes illegible. Using disk of Windows & tool management I can then format the drive and use it becomes usable with the exception of "Recovery Media Creator".

  I formatted in FAT32, NTFS and exFAT, but none does.
  I tried two USB flash drives, both the same behavior.

  As far as I know, there are no partitions on the disk and I used successfully "Recovery Media Creator" on one of the disks in the past. I want the files to restore another computer, something I've done successfully before.

  I can burn data using DVD but the DVD did not work so I want to try the USBs. I have read some threads in this direction but have not found the answers to date. I'm sure that there is a simple explanation but I'm not.

  Usually, the creation of recovery using the USB flash key support should work fine.

  I read in some other threads that the preinstalled anti-virus software could cause similar problems... so I recommend you to disable the antivirus and other security software... so this should work

  Other guy says that delete the partition entirely and create a new simple volume would also work.

• "Disk Creator" and update firmware on Equium A200-1V0

  Please forgive me if I'm missing something really obvious, but I can't find even if I need to update the firmware of my DVD burner.

  The doc readme says to start "Toshiba Disk Writer", and then select Audio CD - that should give me information on the disks required to decide if the firmware update is needed. I don't see any creator of disc on my satellite and selecting Properties on my DVD burner tells me it's a RUG * A DVD-RAM UJ-850 s ATA Device.

  There is no link whatever it is cited in the update of the firmware, wherever it should be a feature of TSST Corp.

  I had a few firmware updates and am unable to see even if they are needed. Any advice would be much appeciated

  Hello

  The update of the firmware are still on the European driver Toshiba page.
  If you find any updates to the firmware on the Toshiba page for you laptop, then an update of the firmware is not necessary!

  Equium A200-1V0 seems to belong to the series of PSAF5 and three updates of firmware for TS-L632, TS-L632P, TS-L632H CD/DVD drives. You can find these details more info

  If your CARPET * a DVD-RAM UJ-850 s doesn t need updates.

• Qt Creator and BB10 NDK, QT-QDE - resolved project

  I have installed BlackBerry NDK, including FDI and downloaded the SDK. Now I've already set up Qt-Creator 2.8.1 2.8.0 2.6.2... In each version, there is another problem with configuration settings. The most advanced was with 2.6.2 and manually configure integration BB10.

  BB10 NDK Version: 10.1 for target 10.1.0.4633 armv7le-v7

  Creator always starts with bbnk - env.bat, called before.

  2.6.2:

  Compiler set with CCG to such custom-arm-linux-generic-elf-32bit as proposed by the https://developer.blackberry.com/native/documentation/core/qt_porting_tools.html (I have a compiler second value instead of linux unix)

  QT-Version provided by Blackberry NDK, Qt 4.8.5 in BBNDK\host_10_1_0_238\win32\x86\usr\bin\qmake.exe.

  Features: BBZ10 is connected and accessible. Qt Creator successfully connects and can use the debugToken.

  Now, the problem is in the Kits: created a kit for BBZ10, saw the bbZ10 device, bbndk\target_10_1_0_4633\qnx6\armle-v7 sysroot, compiler (for linux), gdb to ntoarm - gdb.exe, QT-Version to configured 4.8.5. Now I can try any mkspec it always gives me error (translated from German)

  No mkspec found for considering the Version of QT

  Sharp QT Version wurde keine mkspec found as I think that the mkspecs are set to compile for unix-target, while the OA 4.5 provided with the sdk requires to be a linux target (where actually target is QNX)

  Somehow I can compile with this version, but first of all, I'm not sure if this creates an OK executable file, even more, I can't deploy the executable, because QT-Creator does not create the file of the bar - descriptor.xml...

  2.8.1:

  By using the same configuration as in 2.6 (after 2.6 QT Version) configured, I am able to make the same mistake. By using the 'new' system configuration under the "BlackBerry" page in the settings I can not properly implemented path NDK. Always will say (translated from German)

  The following problems were encountered during the BB10 configuration:

  Not found Version-Qt

  No found GCC compiler

  No debugger GDB to BB10 Comiler found

  No GDB debugger for Simulator BB10 found

  Has anyone successfully configured bb10 ndk for use with qt-creator (2,6/2.8.1) and had similar problems? How can I solve this problem?

  As how can an alternative, I use a QT - App developed for Android/iOS in Qt Creator to be used in QNX Momentics IDE?

  After 24 hours try, installation, relocation, change, cry... I reinstalled entire NDK and Qt Creator 2.8 and published bbndk - env_10_1_0_4633.bat.

  I removed all the variables in the command file and assign the corresponding values, for example to replace each BASE_DIR % with your acutal base-dir (i.e. D:\bbndk).
  For the use of conveniance I craeted an another batch file, calling the batch bbndk-env and from qt-creator.

  The value of the compiler, Qt Version, Kits in creator-parameters, as described in https://developer.blackberry.com/native/documentation/core/qt_porting_tools.html

  Keep the line mkspecs Kits-empty tab

  Happy hacking

• Satellite Pro L875: Cannot burn DVD Recovery Media Creator and win 8

  I have a L875 Pro of the Satellite with Blu - ray burner.

  I tried to create the recovery DVD disc, the burn process stopped and error guest asked me to check if the disc is damaged or scratched. After the burning process, the DVD was not empty and some data wrote on this subject.

  I tried to burn the data disc in windows 8. the burner is not started. I'm only able to add files to the disc.

  I play Blu - ray movies and dvd movies, blu ray player was fine.

  I found information on the appropriate corresponding to the burning speed dvd disc speed.

  How do I know what speed the burner support?

  How to burn a DVD or Blu - Ray in windows 8? (I looked on the Microsoft forum, but the solution did not work.)

  It would be great if someone respond and make the drive burn discs.

  As a first step, it will be interesting to see why you cannot create recovery discs.
  Have you used vacuum on DVD-R media? Otherwise please use it and buy a product of high quality like Verbatim or TDK.

  Is there an option to create the USB stick recovery?

  Combustion under Win8? Have you tried to use some burning as NERO applications?

• Can we get an example of application in CORE NATIVE and WATERFALLS in blackberry-10?

  Good day to all,

  It's too late to ask this question.

  (NOTE: I asked this question in native development Forum also, because I don't know where I have to ask myself this question.)

  I need a sample application (such as 'Hello World') for the CASCADES and CORE NATIVE, to know how to start the NATIVE application. Because when I create a sample app by choosing

  FILE > NEW > BLACKBERRY PROJECT > APPLICATION (application type) > screen/empty (I chose the language in C++), but it provides 'main.c' not the "main.cpp" and I have not a clue of how to grow a single screen according to I have to start the implementation.

  I think you all understand my problem.

  Hi all

  I get the solution here (dishooom replyed on the same question that I posted in the Native Development Forum):

  sample-application-in-CORE-NATIVE-and-CASCADES

  Thanks to dishooom.

• Qosmio G10: Entry Composite and WinDVD creator

  I have a Qosmio G10 and WinDVD creator 2, such that comes with the machine. I am trying to copy some old VHS tapes on my HDD using WinDVD creator and the composite entry next to the socket (connected on VHS by the SCART and supplied adapter)

  WinDVDc is not see anything at all to record from, and even less the composite input (which works fine when I press the "input select" button right next to the adjustment of brightness on the machine screw). I cannot therefore see or record through my TV signal analog, which is near the top and works very well in MC. I can record using MC but trust the dvr - ms format it uses is not editable and is much too inflated.

  I also tried to use nerovision for the same purpose, but I get an error message saying "capture device is already in use...". ».

  Sorry if it's a question of intervideo, but Tosh forums seem more useful.

  Help!

  Hey Jake

  Watch download drivers (the valid section for your model and OS) for a registry patch. Take a look also at the info for it. I think this should solve your problem. This means that you will get the Composite as a data source in WinDVD Creator valid entry.

  Good luck

  Tom

  Post edited by: Tom Mannerhagen

• T500 Vista: Roxio Creator) 1 not installed, missing since 2) C:\SWTOOLS\APPS and recovery) 3?

  Do a clean install of Vista 64 on a separate hard drive to upgrade my T500 Vista 32 following Lenovo's own installation instructions here. Having correctly installed and updated all the drivers and now starting to install applications from the C:\SWTOOLS\APPS directory.

  I discovered that, although the Roxio Creator and MyDVD are installed on my Vista 32 preload factory, the Roxio Creator CBED subdirectory is missing in C:\SWTOOLS\APPS (all applications are there including WinDVD).  I checked on my backups as soon as possible once I unpacked the T500 in December and am fairly certain that it was never a subdirectory of DEC there. There are also a couple of previous forum discussions indicating that I am not the only one with a missing directory DEC.

  So I used my Vista 32 recovery disks to create (once again on a separate disk) Vista 32 factory settings system restore. On this system, I find that Roxio Creator is not installed, but for example WinDVD is installed. In addition to the system generated by the recovery disks all the C:\SWTOOLS\APPS directory is missing!

  Then, I checked my T42 I reset to factory settings with its recovery discs and all of the C:\IBMTOOLS\APPS directory as it was then called present.

  So what happens here, a Lenovo has changed its policy regarding the directory C:\SWTOOLS\APPS or is it a bug that it is absent from the factory settings system restore?

  Can anyone confirm that if I the Badger Lenovo support by sending me to the new recovery disc for my system Vista T500 32 they would understand the C:\SWTOOLS\APPS directory?

  If this isn't the case, any other ideas how I could get Roxio Creator installed on my Vista 64 system?

  Thank you erik.

  Before you call Lenovo support Monday, I decided to do a more thorough search of the disk with Vista 32 system restored to the factory since the recovery discs settings, that I got burned.

  And I found a directory apps much smaller that my factory preload C:\SWTOOLS\APPS. It is C:\Program Files\MLPS\APPS. But the success - it did not contain the directory of DEC. Since the Readme in this directory:

  Easy Media Creator of Lenovo is in two parts:

  Easy Media Creator
  Drag2Disc

  MyDVD is installed as part of Easy Media Creator.

  In a State of preloading, both parties are installed using
  This file can be used in silent mode to silentsetup.cmd.
  Re-install both or one of the applications.

  To capture applications for individual use
  a network environment, all you need is the files
  Since the following directories.

  EPC - Easy Media Creator
  Drag2Disc\x64 - Drag2Disc for Vista64 or XP64
  Drag2Disc\x32 - Drag2Disc for XP or Vista32

• What is Media Creator? I have 64 bit Windows 7 Home so why and when I run?

  What is Media Creator and do I need? I run Windows 7 Home 64 bit on my PC and want to upgrade to Windows 10. If I need to Media Creator can someone tell me when I use it before, during or after the upgrade to win 10?

  Thank you

  Arthur Smith,

  UK

  The creator of media, as its name suggests, creates an installation for your upgrade media to Windows 10. Run it and follow the prompts.

• QT 5.0.2 models of bb10 qt creator missing 2.7 on osx?

  Hey, I try to find the patterns for the development of qt bb10 on QT creator 2.7 on OSX but they simply do not exist in the models of requests. I think that any development of qt 5 and or 4.8 is moved to the q?
  or is this a bug existing before because I can't seem to get even the qt creator to recognize installation ndk.

  When

  By following the instructions here, I found that the QT Creator lacked on installing blackberry models.
  Next setup for the for Qt Creator find the ndk, I find that everything is filled except
  the box of compilers and the box of qmake.

  Anyone facing this problem with Qt Creator?

  http://Qt-project.org/wiki/Qt-creator-with-BlackBerry-10

  I use QT Creator because I also develop an app for android and blackberry 10 and I don't want to use
  Cascades, simply because qt and waterfalls are mutually exclusive development cross-platform apps.

  Hello

  I use Qt Creator 2.7 RC on OS X for development of Cascades. I was also able to compile Qt Cascades non - examples and download them on the device. There are three models:

  Waterfalls of blackBerry application

  Qt GUI application BlackBerry

  Application graphic interface Qt 5 blackBerry

  They are located in:

  / Applications/Qt Creator.app/Contents/Resources/templates/wizards

  BB-cascades-app

  BB-guiapp

  BB-qt5-guiapp

  It is actively developed during the last semester, so very little probable that they were dropped. But I do not find how to switch to the latest version of the SDK Cascades (it only detects the old version), have not studied it yet. Could try you it with SDK Gold? Perhaps that the models are not appearing as NDK is not properly configured.

  My settings:

  Build & run-> Kits:

  Name: Blackberry 10

  Type of device: BlackBerry device

  Feature: BB10 Dev Alpha

  Sysroot: / Applications/bbndk/target_10_0_9_1673/qnx6

  Compiler: GCC 10 BlackBerry

  Debugger: / Applications/bbndk/host_10_0_9_404/darwin / x 86/usr/bin/ntoarm-gdb

  Versions of Qt

  The version name: Qt BlackBerry 10

  qmake location: / Applications/bbndk/host_10_0_9_404/darwin / x 86/usr/bin/qmake

  BlackBerry native SDK: / Application/bbndk

  Compilers

  Name: CCG BlackBerry 10

  The compiler path: / Applications/bbndk/host_10_0_9_404/darwin / x 86/usr/bin/qcc

  ABI: arm - linux - generic - elf - 32-bit

  I don't know if I put these settings manually. They had to be set manually in Qt Creator 2.6, but wiki page doesn't describe it more.

  UPD: I've now updated to the last Qt Creator 2.7 and the models are still displayed.

• Can not download the full version of DVD Movie Factory for Satellite A100 and clean Vista

  Hello

  I did a clean Windows Vista update set of Modus link orgianal.
  Installed and now when a desire to install the DVD Movie Factory patch (DMF5.51_Patch_18in1_for TOSHIBA_147.05_0718)
  There is no software installed dvd creator and also no cd creator...
  It saids "without early DMF found" and is stop and exit installation of this hotfix.

  Now, I can't get the creator software dvd on my Satelite A-100...

  In my OS XP MCE early had a... DVD creator of Ulead DMF for toshiba (oem) and creator of sonic cd

  What can I try now?
  Okky Reagds

  The fact is that both applications are part of the recovery image, and these applications are available if you plant only settings. They cannot be downloaded and installed as well.

  If you want to have them again, you must install OS using Toshiba DVD recovery.