Qosmio G10: Entry Composite and WinDVD creator

Similar Questions

• Qosmio G30 - video input using WinDVD Creator and WinDVR 5 problems

  Hi all
  My G30 (PQL32L) supplied with Windows MCE. It has preinstalled WinDVD Creator 2 and personally I install WinDVR 5 (application of part 3 came with my Plextor ConvertX PX-TV402U PVR).

  Problems:
  1 WinDVD Creator 2: failed to set the TV system. I plugged my video source via the video cable (yellow, white, red) provided and connected to the AV-in port. I chose TV on the HARD drive for the new project. Default WinDVD defined as NTSC but my TV system is PAL. Therefore, input video quality is blurry and cut in two. Once I changed the setting in the software of PAL, the video screen turned black and no response. I have no problem with Qosmio Player with the same configuration of the connection.

  2 5 WinDVR: Application can not start correctly (hang and cannot complete the program) I to my Plextor ConvertX PX-TV402U PVR TV source, then connect it via USB2.0 for G30. My ConvertX works in my office, but failed with the G30. The application cannot start properly and hung. No response yet I'm trying to complete the program, but the screen was always there. When I try to stop my G30 then Windows MCE hung at the "Closing Windows" screen. I have to stop by pressing the button. ConvertX being operation USB cable, it is not achievable in Qosmio.

  Can someone help to solve these or give advice?

  Fine thanks
  Samuel

  Hello

  I copied the film on my camcorder for Qosmio G30 (WXP MCE) without any problem and subsequently created the DVD using Ulead moviefactory program. I also tested it with VHS-recorder. Once again without any problem!

  My camcorder was connected with firewire cable and it has been recognized correctly. VHS-recorder was connected with the aerial cable simply. I was able to record sources using Qosmioplayer (it was just to test because I'm interested, how it works). Movie from VHS-recorder was also possible to record using Media Center Edition.

  I know I also tested it with pre-installed Win DVD Creator but camcorder has not been recognized as usual. If I remember well I put the TV source and that the camcorder is recognized correctly. To be honest I don't like this Win DVD Creator and I have not tested properly.

  So I would like to know what your video source and what you hear in AV-in port.
  Please tell me exactly what cable you use for audio/video data transfer and exact port on your Qosmio laptop?

• Display bug with Tuner TV Toshiba, MCE and WinDVD Creator 2 for Toshiba

  Hello, I discovered a bug that has been troubling for a long time.
  When I watch TV in MCE, the image is a little tense and off-center to the right, which means that I do not see the right side of the screen.

  When I reinstall the TV Tuner driver, version 1.2.0.6, it corrects the problem, and the image is full screen and perfectly centered in Media Center.

  So I spent some time trying to find what was causing the centered and stretched image bug and it seems that it is created by 'WinDVD Creator 2 for Toshiba' which has been packaged with my Qosmio.

  I tracked the problem to be a parameter in the registry to the following key:
  HKEY_LOCAL_MACHINE es\ttv200x\Parameters
  The "VideoRes", which is set to '0' by the TV tuner driver, is set to '4' after WinDVD Creator 2 for Toshiba is used and from that moment, the bug is visible in MCE.

  I've found a workaround with the parameter 'VideoRes' return '0' and restart the computer, then the screen is OK once again in MCE.

  If for some reason, WinDVD Creator 2 makes this change automatically in the registry of TV tuner setting.

  Can Toshiba releasing a patch for WinDVD Creator 2 fix the problem?

  I think it's affecting all the owners of Qosmio with TV tuner.

  Thank you for your support.

  Alcahest

  Hello

  WinDVD Creator 2 is designed by Intervideo, not Toshiba.
  But like you said that the new version of driver has solved this problem.
  Nevertheless thanks for your posting. It s very useful.

  Good bye

• Qosmio F10 and WinDVD Creator: capture unrecognized devices

  A similar problem in a previous post, but the proposed solution does not work. I am trying to record from VCR using the creator, but it lists no capture device, despite video and audio going OK on composite in. I have to do to get to recognize the entries?

  [Edited by: admin on 12 February 06 18:49]

  Hello

  Check it please this subject http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=9908

  very interesting discussion on the record a video on a DVD.

  Good bye

• Qosmio G10: DVD-R and DVD + RW are the CD when inserted

  When viewing my empty DVD drive via Windows Explorer, it displays "DVD - RAM drive".
  When I put a blank disc DVD-R or DVD + RW (brand new Phillips) in the drive, the description of the car immediately passes to 'CD player', and I only get audio options.

  I have never managed to write on a DVD from this machine. It is a completely standard generation, running XP Media Center.
  It will play all CDs and DVDs I've tried. It is supposed to write in all DVD formats.

  I've written on a CD without any problem previously - and (try to) DVD writing I disabled the "Enable CD writing on this automatic diaphragm.

  Can someone tell me what I need to do?

  Thank you very much...

  Hello

  I would say to change the AutoPlay settings in the properties of the CD/DVD drive. This option you will find in the AutoPlay tab.
  Here you can choose the blank CD of content type, then the action.

  Good bye

• Qosmio G10 - capture using WinDVD Creator

  I'm unable to capture video using the s-video input and WinDVD Creator - I have connected my camcorder to the s-video port, but WinDVD Creator recognizes that nothing is played. Several users have advised by clicking on the icon key after running WinDVD Creator, but I tried to open it several times, by selecting a new project, and I do not see the icon key to little matter what I do.
  I had the software on my computer for awhile. Did I miss something in the initial configuration? Should I reinstall?

  Any help would be much appreciate.

  See you soon
  Raymond

  Hello

  Please check the download page for Toshiba under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  You will find all the stuff you need for your model of laptop. It has also rated Registry fix for WinDVD Creator. You'll find it under registry Patch.

  Check it!

• Qosmio F10: WinDVD creator

  Qosmio F10 is for sale with DVD creator, anyone who acquires an analog video with her

  I have a Qosmio (a G10) which came with WinDVD creator but I am unable to capture analog with her. I tried many programs of the trial and can't get something to recognize Tv Tuner or analog in.
  The Qosmio seems to purely through MCE

• I need new adapter for Qosmio G10. Help!

  Hi, I bought my son a new Qosmio G10 for Christmas and suplly charger is faulty, I live in are * and need an asap willing to drive up to 100 miles cash waiting, someone help me please?

  Paul
  07716 521059

  Hello Paul

  I found the same information as San Remo. PA3237U-2ACA is the right one.

• Qosmio G10 106: no guarantee but the motherboard has been replaced for free for free

  Hey there.

  I have my toshiba QOSMIO G10 since 2005 and this year my chart just went bad for some reason, my bad I was my warranty had already expired, so I called Toshiba to inquire about the price of the motherboard as the graphics card is integrated with it.

  It was absurd VAT will cost me £630.00, I got frustrated and I decided to call Toshiba to make a complaint as a fact. They returned my call telling me

  They will change my motherboard for FREE and they made in '48 hours' unbeliveble.

  It was amazing and grateful. So if anyone has the same problem as I'd just call them.

  PS This is my second Toshiba computer, I can tell you after I will love forever toshiba and I fell so happy and proud to have had bought my computer a respectable company like Toshiba.

  I see you have already posted issue you here in this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=21291

  Hey Marcelo thanks for sharing this info with us! I think Toshiba support really isn't bad and you message confirms this fact!

  Thanks for your comments

• Qosmio G10-133 - Install Qosmio Player and using the recovery disk

  Hi again.

  My g10-133 was the mother of uypgraded installed by Toshiba that there are back and forward in his first year with problems of graphics chip, so they installed the motherboard with the 6200 chip chart.

  Until very recently, I installed Windows XP to one of my dead computers that I've ever had anywhere with my original recovery qosmio disc such that it has been damaged. I recently bought an other G10 as I wanted to replace the keyboard and display and it came with disks,

  I put in a raw player. I used the recovery of the Qosmio player disc, and this indicates that it is complete. I then installed the Toshiba Recovery disk that has Windows MCE on it. (I have now three original copies of the present). But when windows go to start, the computer gets past the Bios and then quickly goes to the blue screen of death... I tried to use break so that I can read this, but it does not work. I tried more than a windows disk, but not joy. I also had special instructions for Toshiba, which has the Qosmio updater on him, and also another drive which has some additional drivers.

  So far, I've tried all sorts and whenever I go to start the laptop, it crashes. The Toshiba recovery disc has two methods that an automatic and a step forward on (which I don't have a clue how to use). The automatic, which does not implement the normal windows installation, but evokes a Toshiba says... and it goes from 0% to 100% and ends each time.

  If I use my Windows XP disk from another pc it install fine. and the laptop is fine until it reaches download Windows SP3, which seems to slow everything down.

  I would like to install the Qosmio to style factory if pos.

  What you need to help your service provider which has replaced the motherboard. A long time ago I heard talking of this and what I know is that the machine must be ready for use: This means service must update the BIOS, verify compatibility of memory, RAID functions are not the same, Bios, EC/KBC and DMI must be updated and rewritten. The laptop owner must be willing to work with new hardware components.

  If I m remembering well this new mainboard has different chipset and recovery image that you are trying to install has really bad drivers inside. With other words: after the Exchange system motherboard drivers and the Qosmio Player require an update.

  You know the whole process is a bit complicated, but, as far as I know, Toshiba service provider must send you instructions for Qosmioplayer update and instructions for the update tool.

  At the moment I can't help you. Please call again and ask for help. If you will not get any help it let us know.

• Qosmio G10 - 134:Can, I attach a question of PS2 and PCMCIA slot

  Hello world

  I think buying a Qosmio G10 134 soon.
  1. How do you pronounce Qosmio?
  2. can we my son attach a PS2 and use the screen for his games?
  3 are there the PCMCIA slots on these machines?

  Thank you
  Lemarié

  Hello

  Self-monitoring analysis and Reporting Technology (or S.M.A.R.T.) is a technology that allows a PC to in some cases predict future failure storage devices. This SMART technology is present in your drive, but by default is set to off on your drive. To use the feature S.M.A.R.T. would require you a software (or BIOS) which allows and monitors the Smart status of your hard drive.

  HARD disk speed is unfortunately unknown to me.

  I'm sure that the TV tuner is set to Pal if you will buy it in the United Kingdom and may not be changed for NTSC.

  Qosmio G10 106 has 4 x USB ports and Bluetooth is not available.

• Qosmio G10 graphics and sound driver installation

  Hello

  Recently, I tried to reinstall my Toshiba Qosmio G10 after you download all the latest drivers from the Toshiba site.

  Unfortunately I had my motherboard and the screen replaced in the last 3 years (under warranty), which means everything has changed since the original laptop, I bought (now a map graphic, NVIDIA GeForce go 6600, new chip set, etc., as far as I can remember).

  Someone at - it a system restore cd or a place I can download the appropriate drivers for this laptop.

  I am a sys admin and technical and spent about 5 hours, pulling on my hair, trying to get the drivers video and sound work.

  Hello!

  It is pretty easy to get drivers for a laptop of Toshiba.
  Looking on the Web from Toshiba site?

  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers
  Search for Qosmio G10, then you will find it.

  Good bye

• Qosmio G10: player can work only DVD and CD but not the CD

  I have trouble with my Qosmio G10. DVD - RAM can only run autorun CD and DVD, but it can not run the CD. When I installed daemon tools he started to read not burn and I uninstalled and installed my CARPET * A DVD - RAM UJ-8205 of pilots again and again but nothing changed.

  What should I do? If you know it please send me a message to [email protected] please...

  Hello

  It seems that all 3rd party applications could have a bad influence on the reader.
  It happens with a new OS installed since the Toshiba Recovery CD?

  Additional access properties of disc (right click) and check the recording tab. The engraving option must be enabled.

• Qosmio G10 with the new graphics card and pcb - CD update tools do not work

  Hello world

  I hope you can help me. Before a few weeks, I received my Toshiba Qosmio G10 return of aid, because the laptop no longer works. So I get it back with a new graphics card and a new PCB. With my laptop I have a CD called the update tool CD and a sheet of instructions, where it says to start with this tool CD-Rom update after you have installed the Windows with the reovery CD.

  So I did, but when I know the update tool CD to put in and I start with it, the computer installs something, but after a short then it is a message that it is a different model and that I have to put a button to close Notepad. So I did it, but Windows does not start.

  Why is it so? I had done everything that has been said on the instruction sheet.

  Please help me

  Hello

  It will be interesting to find more information on this CD-Rom tool update. Are there tags Toshiba? Can you please write what is described here?

• Qosmio G10: Blue screen shot and later endless reboot

  Hello!

  I found similar topics on this problem, but they were locked and left unanswered.

  My problem is this: I have not changed of _anything_ in the BIOS for a log time. I have not installed new software or hardware lately. And I have not damaged my computer or anything like that. A few days ago I read a Web page when my computer turns off suddenly. It turned on automatically, then it asks me how to restart... count up to normal restart... the blue screen of death... restarts, wonder how... I choose "Safe Mode"... BSOD. I press F8 and try all possible options, but the result is always the same.

  A blue screen indicates: "MACHINE_CHECK_EXCEPTION" or something like that. I'll send more information about blue screens later and more machine ID.

  If someone has any idea what happed and how this could be fixed, do not hesitate to write.

  I can't access Windows and I won't use CD recovery (yet) because I need to save some data to the HARD drive first.

  I say it's all simply amazing. Graphics card a year ago broke down (blue/green vertical lines, fans are going full throttle) and now this! This is the 2nd time in two years when Qosmio brokes suddenly.

  Post edited by: ADMIN

  Ok. Here's some additional context information.

  My laptop Qosmio G10-105, model PQG10E-01D016FSR. After disassembly I was not able to access the windows more - not again. Several times that I managed to get into SafeMode so far, I was able to see the text "Safe mode" in every corner of the Welcome screen, but then it crashes. Once or twice the same in normal mode, Windows on the Welcome screen appears, but then it crashes immediately. In these crashes, blue screen says "MACHINE_CHECK_EXCEPTION" or 'PFN_LIST_CORRUPT' and landfills fysical memory on disk.

  If she does not get there and computer falls down at the beginning (even if the Windows loading screen) it restarts all computer instantly. Sometimes, he does not screen blue but says the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM. This error can appear four or five times in a row then it tries to start normally, but blue screen crashes again.

  I can't find any logic in the accident, nor a way to avoid. It seems that various errors appear randomly. I would like to know if it is a crash HARD drive or something else. Other information are also welcome.