Qualcomm 3 G module error message "no signal available.

Similar Questions

• OCIEnvCreate failed with return code-1, but the text of the error message was not available. »

  OCIEnvCreate failed with return code-1, but the text of the error message was not available. »

  I get this message (error) after update my customer Oracle 9.0 to 10.1 (used in the .net Oracle connection)

  I would like to get a resolution? If someone has experiece with her.

  THX

  Hello

  To improve assistance to this subject, you can ask your question in the MSDN Forums.

  NET Framework

  http://social.msdn.Microsoft.com/forums/en-us/category/netdevelopment

• Error message "Preview not available for this file.

  I use LR 4.4, but it did not work properly since I got my new camera (Canon 70 d). When you try to import, I get the error message "Preview not available for this file. I got lucky better connection of the device with a usb cable, which allow me to see the jpg images, but he wouldn't let me see the raw images (.cr2). I would solve this problem by opting for the LR5?

  I use LR 4.4 on a Windows 7 PC.

  Thanks for any help that can be provided.

  Robert

  Support for the Canon 70 d was introduced with LR version 5.2. See the link below.

  Camera Raw plugin | Supported devices

• Since the upgrade to 8.0.1, on 80% of the addresses entered Firefox give me an error message "server not available - try again. What did guys?

  Since the upgrade to Firefox 8.0.1 for two days I get this error message on 80 percent of the addresses I try to access:

  Server not found

           Firefox can't find the server at orders.tigerdirect.com
   Check the address for typing errors such as
     ww.example.com instead of
     www.example.com
   If you are unable to load any pages, check your computer's network
     connection.
   If your computer or network is protected by a firewall or proxy, make sure
     that Firefox is permitted to access the Web.
  

  What is the problem with the upgrade?

  Upgrade your Firefox 9 browser and check

  • getfirefox.com

• iPhoto 09 stopped allowing me to print photos. Error message: "No themes available" "there are no themes located. Until at least a theme has been installed, this feature will be unavailable. »

  iPhoto 09 stopped allowing me to print photos.

  Error message below:

  "No themes available.

  "He has not located themes. Until at least a theme has been installed, this feature will be unavailable. »

  Re - install iPhoto

  1 put the iPhoto.app in the trash (to drag it from the Applications folder to the trash)

  2 download on the App Store to reinstall is on your shopping list * it.

  For older versions that were installed from the disk, you need the following additional steps:

  2a: on 10.5: go to HD/library/receipts and remove any pkg file it with iPhoto in the name.

  2b: on 10.6: these recipes can be found as follows: in the Finder, use the menu go to and select go to folder. In the type of window that results from

  / var/db/receipts /.

  2 c: 10.7 or later, they will be

  / private/var/db/Receipts

  A Finder window opens at this location and you can delete the files pkg of iPhoto.

  3. replace in place.

  If you bought a disc of iLife, iPhoto is then on it.

  If iPhoto has been installed on your Mac, when you go to it then it is on the restore disks from the system provided with your Mac. Insert the first and choose "install Bundled Applications only.

  * Sometimes, iPhoto is not visible on the shopping list. It may be hidden. See this article for more details on how to view it.

  http://support.Apple.com/kb/HT4928

  A question often asked: Will I lose my Photos if I reinstall?

  iPhoto, the application and the iPhoto library are two different parts of the iPhoto program. So, reinstall the application should not affect the library. BUT you should always have a back up before doing this kind of work. Always.

  
  

• Desktop remote access - required implementation of the laptop on the desk - says access error message is not available. Both are running windows 7 Home premium.

  I try to set up remote access to my desktop from my laptop and got an error message on the phone, saying: he there was no desktop access even if both are running windows 7 Home premium.  How to establish a connection between the desktop computer so that the laptop can access it remotely? I find IPv4 on the desktop but when I enter it in the laptop, it says no access available.

  Hello

  If I understand correctly you are facing problem with remote desktop access to your computer Windows 7 Home Premium. I suggest you to see the link follwoign to see if OS of family Windows 7 premium supports remote access.

  http://Windows.Microsoft.com/en-us/Windows7/Remote-Desktop-connection-frequently-asked-questions

• Wireless network connection disconnects when you plug in the charger and the error message "no connection available or limited connectivity.

  Original title: wireless computer does not work when plugged in and load, why?

  have a laptop Windows 7 who had originally installed XP. I have not changed anything inside her, but suddenly one day any time, I have the unit plugged my Ethernet and wireless turns off. As soon as I unplug it, the computer note immediately that there is a wireless card and connects.

  
  

  The computer has never done this until two weeks ago. It works just fine when unplugged, but still once, as soon as I plug it in it disconnects and States they has "No connection available" or "limited connectivity". I started seriously annoyed because it's my main laptop and I must wait for it to load in order to do something with him for an extended period of time.
  The device information:

  > Ze2000 HP (Pavilion series)
  > Original OS: Windows XP Home Edition
  > RAM: 512 MB
  > 100 GB hard drive
  > AMD Turion 64 Mobile Technology ML-34
  ___________________________________________________________________________________________________
  I can provide information. No errors appear in the error log or event viewer and I made backups and reset 3 times in recent weeks.

  Hello

  I appreciate your efforts to solve the problem.

  This problem may occur corrupt or incompatible drivers, missing updates or because of incorrect network connection settings.

  Are you having the same problem when you use the configuration of a network connection?

  I suggest you to check if there is no wireless or mobile network\devices which can interfere with the wireless network and remove if there is.

  Method 1:
  I suggest you to download and install the latest network driver on the manufacturer's Web site and check if it helps.

  Check out the link:
  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=442888&TaskID=135

  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab4&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 3:
  If the problem persists, I suggest you to check that your device is allowed to the computer.

  a. click on start and type Device Manager in the box start the search .

  b. open the Device Manager and expand network adapter.

  c. right-click on the network driver and click Properties.

  d. click the power management tab.

  e. uncheck all options.

  f. click OKand then click OK again.

  See the article and check if that helps.

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-in/Windows-8/cant-connect-to-Internet

  
  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

   

• WiFi doesn't work not, error message "no connection available.

  Hello everyone.

  I have a Lenovo G580. Until last night my wireless worked perfectly. However, the last night and without changing what whatsoever, the wifi icon that showed * which means that it has detected a network, but when I want to press it, it seems that there are no available connections. Although I can connect to the internet via cable, wifi is like I turned it off, only I did not. My laptop uses the qualcomm ar9485wb-eg network adapter atheros. I downloaded some drivers for the Atheros website, but they do not seem to change anything. Does anyone have any suggestions?

  Thank you very much

  Dina

  Hello

  I suggest you try the procedure described in the article and see if it helps.

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows/fix-network-adapter-problems#1TC=Windows-8

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Downloading error message modules - cannot download. want blocker urged

  When installing modules error message appears

  "theree was a download error...". »

  This has happened will install all of the addons that I tried within 2-3 seconds by clicking

  Check if the facilities are allowed in Firefox

  • Go to about:config as you go to a Web site
  • Press the button saying you will pay attention
  • Searchxpinstall.enabled
  • The value of xpinstall.enabled should bet on TRUE. If it is FALSE, it right click and select Reset.

  What is the exact error it gives you?
  
  Try these fixes in this article

  • https://support.Mozilla.org/en-us/KB/unable-install-add-ons-or-extensions

• Error message @ boot Win 7 Pro "it was Aproblematique from C:\programdata\ofpviaowu.dat - the specified module could not be found."

  Error message @ boot Win 7 Pro "there was a problem starting C:\programdata\ofpviaowu.dat - the specified module could not be found."

  This error message appears whenever I have start my computer and windows starts (Firefox doesn't start up). 15.01 Firefox work properly otherwise.

  This started after I installed the 15.0.1 patch.

  I uninstalled and reinstalled Firefox but the problem remains. Search Google for "ofpviaowu.dat" came with "2012-08-29 Firefox version 15 startup Crash Report" as the only listing.

  Is this a Firefox problem?

  My system has this file: C:\ProgramData\Mozilla\logs\. I don't think that Firefox or update service should write directly to the root of C:\ProgramData\. It could be a configuration error, or it could be completely different.

  You may be able to remove your boot sequence problem .dat file using Microsoft Autoruns utility: Autoruns for Windows. If you find an entry, can describe you it?

• I get this error message 'The URL is not valid and cannot be loaded' when I try to go to Firefox home. I uninstalled the modules, uninstaleed and reinstalled a new fresh firefox which did not help

  I get the following error message 'The URL is not valid and cannot be loaded' when I try to go to firefox home. I uninstalled modules, uninstalled Firefox and then install a new version. Still have the problem.
  Thanks for the help

  This problem may be caused by a corrupt installation of Visual C++ or incomplete (several versions can be installed-by-side; SxS) it lacks certain runtime components (redistributable Packages), which depends on Firefox (problem with an embedded manifest file that specifies a specific runtime version).

  You need to install the missing components (for example, Redistrbutable end 2005 ++).

  • https://www.Microsoft.com/download/en/details.aspx?ID=5638
  • [908165/questions/908165] The URL is not valid and cannot be loaded
  • bug 713167 - Microsoft.VC80.CRT SideBySide errors, browsercomps.dll

• Qosmio G30-220: HD-DVD via HDMI - error message Impossible to export the signal

  Hello

  When I play a HD-DVD on my G30-220 LCD_panel, it works like a charm (with the Toshiba HD - DVD player software).

  When I switch to dualview to export the signal through HDMI to my LCD TV (HDCP), I get an error message:

  ' Cannot implement the signal. Please switch to the internal display "(this is not the exact English message. I get the error message in Dutch and I've translated).

  Hello

  As much as I know the dual display is not possible. Either watch you on LCD display or on the TV. The two of them at the same time will not work. Reason because it's the protection against copying, and also because of very high data transfer.

  I tested it with Qosmio friends on my LCD HD-ready TV.

• Error message for liveupdate Engine COM - Satellite P100 module

  I have a Satellite P100 using Windows Vista Edition home premium and upgraded cable internet plans with Optus over the weekend at the Fusion89 plan.
  Since internet is slow to open (when I click on a new tab up to 25 seconds), and attachments are slow to open emails.

  I also got an error message of Microsoft Windows indicating "COM liveupdate engine module stopped working and was closed. A problem with the application to stop functioning properly. Windows will notify you if a solution is available.

  I contacted Microsoft who said they would help me for a fee, but as I have the laptop under an extended warranty, they suggested to contact the people I bought where Mohammed. Before contacting Clive Peters soes, anyone has any comments or suggestions about my problems?

  Any help will be much appreciated.

  Try this:

  Go to a command prompt and run "CHKDSK C: F.
  Run WindowsUpdate / update of Internet Explorer
  Try disabling your anti-virus software or firewall software.
  If you have installed the Optus/connection software, update the software.
  Check (optus) ISP proxy settings in IE and e-mail software.

• Signal Express 2009 causing NIMAX generate an Exception error message

  I have a system which gives an error message when I try to open an instrument in NIMAX. The popup error message shows 'unexpected error', with a code of "MAXKnownException. This system running Windows XP, and we Signal Express 3.0 with 4.3 NIMAX works perfectly. We went to Signal Express 2009 with NIMAX 4.6 and this problem occurs.

  Error log message which is gereated is

  "The niVISAui.mxx plug-in caused an exception in the CmxAggregateItemUI::GetToolbar function in the process of NIMax."

  Thank you

  Some info about failure for future reference, the problem is not benign in the pop up I chose to ignore the error message but any time, I tried to open an instrument in NIMAX I would get the same pop up and NIMAX was virtually unusable.

  The good news is that we were able to get this to work. The Signal Express 2009 package we received came with the associated device drivers CD. Unfortunately, NIMAX on the CD version was 4.5 and it turns out that Signal Express 2009 must have the 4.6 version to work. We took NIMAX version 4.6 out of the web site of NOR and cured the problem.

• Windows XP starts, an error message appears. 'RUNDLL error loading C:\Windows\ihukuqej.dll'. The module specific cound not be found.

  Original title: Windows Rundll error on startup

  My laptop, Windows XP startup, an error message appears. RUNDLL error loading C:\Windows\ihukuqej.dll.  The module specific cound not be found.  I downloaded ParetoLogic PC Health, did a full scan on the registry and fixed all of them, rebooted and its still there.

  What is a rundll error?

  File rundll.exe are processes systems directly connected to your computer Windows registry. All of the Dll files are a part of the vast library that contains code and data that are shared by many programs. This allows to obtain the effectiveness of speed and memory of your operating system by reusing the same code or file to run many functions of various programs. An error occurs when the program are not allowed to access this code.

  Why do you Rundll errors?

  Windows uses rundll files to load programs, files, and applications. If the dll file is missing or damaged, any application using this file cannot be loaded. This will produce a rundll error. The reason why the file has disappeared is often related to a virus or spyware. This type of malware often tries to divert the files shared by the rundll file. Other sharing programs file then do not work effectively or to load any.

  STEP 1: IDENTIFY

  The first thing you need to do is to identify the process specific rundll. This isn't a difficult task; There is a library online extensive process in which you can assess the validity of the process that is running. When the error dialog box opens, it displays the name of the process. For example, if the dialog box appears and tells you the dll error:

  STEP 2: STOP THE PROCESS

  Often, you can locate the Dll of enforcement in the services of the exe. You can open your services configuration by following the instructions below:
  1. open your Start menu.
  2. click on run
  3. in the command screen type:services.msc
  4. This will bring to the top of the window Management of the Services . If you drag the mouse to one of the services. It will give you a detailed explanation of the service in question. By right-clicking the individual service.
  5.stop the "dll" service immediately.

  NOTE: sometimes the dll process can not be stopped by this method.

  

  STEP 3: CHECK FOR AND REMOVE

  You need to open your Windows registry file system. It is an extremely delicate process. The registry key: HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > RUN

  This action will help you speed up the considerable load time of your applications. Here's how:

  1. click on Start
  2. click on run
  3. type regedit
  4. find this registry key:
  HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > RUN

  5. in the right section click on: "rusvdgpo" = "%System%undll32.exe % System%usvdgpo.dll, [RANDOM LETTERS].
  6. delete the value and reboot.

  

  SPECIAL REMARKS

  Rundll.exe is a critical system process. However, there a great vulnerability is back, which makes it more prone to malicious purposes by an attacker allowing access to your computer from remote locations, stealing passwords, personal data and Internet banking.

  The Trojans are usually use this attack method to share a process that invites the other malware be more Trojan horses or other forms of spyware. The best defense is to keep your security up-to-date software and explain the process of rundll on your computer.

  ======================

  More information is a lot to explain and resolve the problem.

  Since it is a painful process for beginners, it is best to create a new user account and remove the error causing the user account.

  Because not only it solves problems, there will be new user settings and the program files needed for the user account.

  Once you are in the new user account, you can scan by using a program that synchronize with the server and check for virus/malware/spyware.

  Here is the link.

  Run hitman pro 3.5

  http://www.SurfRight.nl/en/downloads