Quality image 23EL933G HDMI problem

Similar Questions

• Quality image after export problem

  Hello

  I have a problem of quality after the export of the image. for example in one case, I make a modification, especially at the level of sharpness of an image, after when I exported the JPEG image, there is a large drop in sharpness and more noise.

  Knowing that the adjustment of export level everything is good in quality years 100% and type pour inking of high office.

  NT: the quality of the Exported JPEG image is the same as the quality of the image in the library and not in development tab.

  Thank you

  There are several problems with your settings. The detail panel sharpening (NET ') and the noise reduction controls should only be paid in Zoom 1:1 Mode. The amount of sharpness (Gain), detail, brightness and contrast are too high. Adjustment brush sharpening (NET ') setting 100 is compensated by the noise of 100 (noise), so little local sharpening is applied. Also the moire ' and fringe 100 parameters must both be left at 0 (OFF), because they serve no purpose for the sharpening of the premises. Please try the settings below and evaluate the results in development and library modules View Zoom 1:1. If having the same problem please download the raw export to DNG on Dropbox or other image file sharing site files and I'll try to decide the issue.

  For more help and tutorials in French please look on this link: training for Lightroom, assistance and support. Adobe Photoshop Lightroom 5

  

  

• Reference Dell 42 '' Plasma W4200HD HDMI - problems

  Recently had my Plasma 42 "mounted on a wall by using tv HDMI / HDMI / STB. Worked fine for 4 days then screen started flashing several times every second. Audio is fine.  HDMI letters appear at the top in the middle of the TV. Already have cable HDMI/DVI tv box without problem but decided to simplify and go all right HDMI. I had tv for 3 years, works very well so far. Is this typical HDMI problem with this model of tv?

  
  

• I have a very high quality image that I put on InDesign and it looks great on the screen and print very pixelated...

  I have a document that has a high ranking on quality image. When we print it's so pixelated. How can I fix?

  If it is not one of those ^ and you print directly from InDesign, go to print > graphics > Image > data send: > and choose 'all '.

  Or better yet, export as PDF and print from Acrobat.

• mosaic of white image: ORA-06531 problem

  Hi all!
  I have a problem :( Cannot create two blank images mosaicked image. Can someone help me?
  Oracle 11.2.0.2. Windows.
  
  Script:
  ------------------------------------
  declare
  GR sdo_georaster;
  GR1 sdo_georaster;
  Sdo_georaster GR2;
  Start
  
  removal of the test;
  commit;
  
  GR1: = sdo_geor.createBlank (21001, sdo_number_array (0, 0, 0) sdo_number_array (350, 350, 3), 255, "TEST_RDT");
  GR2: = sdo_geor.createBlank (21001, sdo_number_array (0, 0, 0) sdo_number_array (350, 350, 3), 255, "TEST_RDT");
  
  GR1.spatialExtent: = null;
  GR2.spatialExtent: = null;
  
  sdo_geor. Georeferenced (gr1, 262148, 1,
  sdo_number_array (0.419, 0, 1321160.5575),
  sdo_number_array (0,-0.419, 467357.1645));
  sdo_geor. Georeferenced (gr2, 262148, 1,
  sdo_number_array (0.419, 0, 1321244.3575),
  sdo_number_array (0,-0.419, 467273.3645));
  
  GR1.spatialExtent: = sdo_geor.generateSpatialExtent (gr1);
  GR2.spatialExtent: = sdo_geor.generateSpatialExtent (gr2).
  
  insert into test (id, image) values (1, gr1);
  insert into test (id, image) values (2, gr2);
  
  commit;
  
  Remove mosaic;
  commit;
  
  insert into mosaic (id, image) values (1, sdo_geor.init ('MOSAIC_RDT')) VOTING image INTO gr.
  sdo_geor. Mosaic ('TEST', 'IMAGE', gr, NULL);
  image fixed mosaic update gr = where id = 1;
  
  commit;
  
  end;
  ------------------------------------
  Error:
  
  ORA-06531: Reference to an uninitialized collection
  ORA-06512: at the 'MDSYS. SDO_GEOR_INT', line 674
  ORA-06512: at the 'MDSYS. SDO_GEOR_INT', line 924
  ORA-06512: at the 'MDSYS. SDO_GEOR_INT', line 1268
  ORA-06512: at the 'MDSYS. SDO_GEOR_INT', line 1539
  ORA-06512: at the 'MDSYS. SDO_GEOR', line 1401...
  ------------------------------------
  
  In fact, this problem is caused by images real mosaicing. But I can't do it even with the virgins.
  Please, help me!
  
  Edited by: 869446 the 30.06.2011 06:38

  If you got the same error when you mosaic on the actual image, maybe not problem of mosaic. Please try the following on your development database and let us know if it solves the problem:

  sqlplus sys as sysdba
  SQL > alter session set current_schema = mdsys.
  SQL > @${ORACLE_HOME}/md/admin/prvtgr.plb

  -Fengting

  Published by: fechen on June 30, 2011 07:19

• Why I see bad quality Images in Firefox?

  I have Android 2.3.3 and latest Firefox Mobile. I am connected via Wi - Fi and all the images are of poor quality. Is - this intentional on the side of the developers or the problem, it is on my side?

  I want all images to be of good quality.

  Same thing.

• Satellite L650-12 q - external monitor through HDMI problem after waking up

  Hello

  My problem is that after external monitor goes to sleep and then wakes up again the image on the screen is bigger than the screen acctualy. This means that I don't see a part of the image (my office) as part of the taskbar and my settings is changed into 59Hz instead of 60, so when I change them back to 60 hz in Panel intel HD graphics everything looks ok, but it happends once again after the monitor going to sleep How to solve this problem?

  I've updated display drivers to the newest in this web site, which is 8.15.10.2086 of [here | http://uk.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=UK&selCategory = 2 & selFamily = 2 & selSeries = 178 & selProduct = 5376 & selSh ortMod = 1007 & language = 13 & selOS = null & selType = null & ye arupload = & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = 8 & selectedLanguage = 13 & type = null & page = 2 & ID = 74203 & O SID = 30 & driverLanguage = 42] :
  My monitor is HP 2710 m connected via HDMI 1920 x 1080 p.

  Any ideas?

  Hi evaldas,.

  You have the same problems when you try another HDMI cable?
  You can also test it with normal VGA (RGB) connection?

  Sorry, but everything that s what I can say for the moment that seems strange to me

• HP Deskjet F2280 all-in-one: color print images saved offline problems.

  When I print an image that I downloaded from the internet, the colors do not conform to the original (a lot of blue in there).  I printed directly from the printer itself, and that's fine.  I changed the color cartridge, did the cleaning, checked, I had download the correct software and tried to open the image in paint, but still not good.  I changed the setting to fast eco who, although not the bright, the image itself so more true to color.  Can anyone help please.

  Hi @anniegwenand welcome to the Forums of HP.

  I see that when you print images that you save from the internet, the colors are not what you expect and the printed output is more blue than the original. Because when you print directly form the printer (copy) the output is as expected, I suspect that the issue has to do with the print settings, a driver or a program that you are printing from.

  I suggest to use the following steps to remove the printer from the device and printers and the driver from the properties of the server. This will help isolate the driver.

  1. in the folder "devices and printers".

  2. choose "print server properties.

  • Win XP - with no printer selected, click 'File' then 'server properties '.
  • Windows Vista - with no printer selected, press 'Alt' and then click 'file' then 'server properties '.
  • Windows 7/8, 8.1 and 10 -select any printer in the "Devices and printers" folder and click on "Print server properties" above.

  3. click on the "Drivers" tab at the top of the window "properties of the print server.

  4. choose the printer that you want to uninstall, and then click 'remove '.

  5. choose "Remove driver only.

  6. the next screen will give a warning, letting you know that the removal of the driver package will remove it from the system. Click 'Yes' to say are you sure you want to do.

  If documents are stuck in the spooler to print, you see an error, cancel all documents waiting in the print queue or try restart the spooler to print, and then try to delete the driver from 'Print server properties' again. If she will not always remove the sachet, restart the computer and the printer should correct this error "in use" and allow the driver to be removed.

  • If him you continue to get an "in use" message followed the steps in the document here. The specified printer driver is currently in use

  Once the driver is then deleted, open start > all programs > HP folder > folder printer > HP Setup and software (or the icon of the printer). The installation screen and the software opens and you can click on connect a new printer.

  If the fingerprints still don't match what you see on the screen, try to print in a different program. For example, instead of save an internet image, print the image directly from the browser. In bold, what brings the cause to wonder, when you save, you are printing on photo paper? Have you compared the print quality between an image printed on ordinary paper and a image on photo paper? If you use photo paper, and that's the only time where the output is more blue than expected, please try different photo paper. I know this sounds unlikely, but I seen the book be causing more time than you probably imagine.

  Let me know the results of your efforts at this point, and we will proceed if other troubleshooting is necessary. If something I suggested the problem, please click Accept button Solution below to report your post as solved.

  Thanks, I look forward to hearing back on your part.

• High quality display still a problem

  Hi, have installed everything recently Patch_All AdobeIndesign 7.5.3 to help solve the problem of slow performance of high quality display when dragging images on the other in the area of the workspace on InDesign CS5.5 but the issue has not been corrected. Using view > display typical does not solve the problem, but I was wondering is there another work around the issue. 2011 iMac using 10.8.5, Intel Core i5 to 2.7 GHz, 12 GB RAMM etc so the specs are very good. The file sizes are very small, IE: 2.4 MB. Any suggestions? Thank you

  I don't remember what the default setting was for drawing to screen Live in CS5.5, but I would recommend that you go to delayed if it is not set to that already. This will give you the same behavior you have been accustomed to in CS3 to the extent of the moving objects (they are redrawing release unless you click and hold for a while before dragging). Many older systems and even more recent are struggling with the screen drawing Live the Immediate value.

• Images - facing a problem with the alignment of captivate

  Hello world

  I am using captivate to create e-learning courses for my client. The course was in PPT and slides have been imported into captivate. The process was smooth until the customer asked me to change the size of the canvas. The course includes images as well as on the slides.

  The problem comes here

  1. I can chamge the size of the canvas of 1024 * 768 and 1280 * 800 in the same file? If so, how?

  2. I tried another way of doing this thing. I created the canvas with 1280 * 800 itself. Then, I went back to the old captivate file and copied all the slides and paste it into the new file. But the blades with images have problem (eg. alignment issues produced.). Is it possible to modify these images here himself in captivate so that I can move with arrow keys and mouse to solve the problems of alignment?

  Thank you and best regards

  Vikas

  Please, this is a forum for users and expect to get an answer right away? Myself and other users to be able to spend more than one hour a day, trying to answer questions, but we do that in addition to our normal work and all this for free.

  You can resize a project with changes, the project of the scale. You have the choice of high end everything, which will always lead to a loss of quality. Best result is given when you can keep the aspect ratio, but this isn't the case for you, since you spend report 4/3 16/10 rather unusual.

  Problem is, imported, Powerpoint slides are converted into film slides. This means that you don't have the items separately in Captivate and will not be able to reallocate the as you request your second question.

  Even resizing in Powerpoint will give you a lot of headaches, because of this change the aspect ratio. And that would be the way to go, if you use Captivate as a converter for PPT, that is not the best use of a creative tool at all. A plug-in for PPT is much better suited for this cause (Adobe Presenter, Adobe articulate, iSpring).

  Is to embed the slides present in a Knockout Master slide a possible workaround?

  http://blog.lilybiri.com/create-and-use-a-knockout-master-slide

  Lilybiri

• Right-click on the image with link problem after upgrade to 11.0

  After the upgrade, whenever I do a right-click on an image with a link, it opens the link rather than opening a menu drop-down. Any idea on what is causing this behavior?

  OK, think about it. Extension: Tab Utilities was the origin of the problem. Uninstall completely solved the problem, disable it does not solve it.

• Common modules on Windows 7 x 64 and HDMI problems

  Jin
  1.), I want to run my remote, hotkey utility, and so one on my Toshiba Satellite x 200 - 22v. But... I can't find common Modules for 64-bit (even vista) version, I installed the utility Hotkey for XP on this seven and it works because of the absence of EBlib.dll (which I can't find at Google to download).

  2.) my HDMI has stopped working - I watch a HD DVD movie and TV appears black, graphic turns his back on the laptop screen and there is no more - TV this one and others. Cable HDMI and entrance to the TV factory (PS3 connected to try). What will happen? HDMI broken phone?

  1)
  Common modules as a tool exist separately for Windows XP Home edition only, and you cannot use it to Win7. For Win7, you use package of added value.
  The most important part of this package is components Toshiba driver common. It's something like the common modules for Windows XP Home edition.

  2)
  It is not easy to get the right answer. Just restart your laptop and try it again. If the problem persists, try to test on a few other TV to see what will happen.
  Post the results and let's see what may be the next step to solve this problem.

• 4545 proBook s: Hdmi problem

  When I connect the Pc with Tv with HDMI to my tv screen after 5-6mins get a problem with the color and you don't see anything, because all the colors are demolished when I disconnect and connect to new work, but once again, after 5 minutes, it's the same problem, I think that the TV has a problem, but I try it with another pc and it works fine. I try with this pc to another TV and it works well only on my tv does not work? this to do can someone help me?

  anoyone can help me?

• Satellite L650D - HDMI problem

  I have a toshiba satellite L650D and a Toshiba TV.
  Last week I connected the hdmi cable to watch a show and it worked fine. Then this week I tried again and nothing... they connect.

  The cable is fine, because my blue ray player works perfectly.

  Any ideas?
  Thank you :D

  On this virtual path, it is not easy to say what the problem is here.
  When you connect laptop to TV do not forget that good ort HDMI is turned on. For example, if you use port HDMI 1 on TV allow it at first and then use FN + F5 key combination to switch between an LCD and TV screen.

  When you use FN + F5 you see several options or only one option (LCD)?

• Satellite L670-1jQ - HDMI problem

  Hello

  I bought a brand new Satellite L670-1JQ especially for the blu - ray, HDMI output. I also have a screen 42 "flat with HDMI input jack.
  The meaning was to play a blu - ray on the laptop drive and transfer the video to the flat screen.
  When I connect the laptop to the flat screen, I can duplicate or extend the desktop. This isn't the problem. The problem is when I move Corel WinDVD BD from my office to the flat screen I see the screen reader but not video, and when I move the player back to my office, that video is displayed again.

  Which is in expansion mode. When I try to open WinDVD on the desktop a copy on my flat screen, then sometimes nothing happens at all! I'm doing something wrong? Or the game can't handle the flat screen?

  As far as I know that this player will never work on extended display. The reader works only on LCD.
  To be honest I don t understand why you use extended desktop when you want to watch movies.
  After you connect your screen, use the FN + F5 key combination and switch to the TV only. Start the movie and the BD player. When the film starts to put the player mode full screen and enjoy the movie on the TV.

  Extended display will work perfectly when you work with some applications but there must be a graphical limitation and with BD player will not work.