Password not accepted on Vista

Similar Questions

• Z5 WiFi hotspot configuration password not accepted by my Tablet

  My Samsung Tablet does not accept the password of my new Z5 during the process of setting up WiFi hotspot.

  Tablet without problem with old phone used as access point.

  Z5 no problem connecting to WiFi at home.

  best regards and thank you

  Everything is ok now.

  The phone has decided to present the "Show password" box, which was not there before.

  Thank you for your patience.

  concerning

• Password not accepted after locking the computer.

  Separated from this thread.

  Hello
  I know it is very old thread, but I have this problem on my computer and don't really know how to solve. @MrGlHayman solution did not help and I tried also the onscreen keyboard to enter a password but nothing seems to work.

  Thanks for any help

  Hi Natrezim,

  Welcome to the Microsoft community.

  According to the request, I understand that you are unable to connect to your computer, because the password is not accepted. I appreciate your efforts to solve this problem.

  To help solve your problem better, could you give us the following information?

  1. Do you receive an error message when you enter your password?
  2. What is the standard account or an administrator account?
  3. You have another user account on your computer?

  If so, then I suggest you log on to the other user account and change the password of the account that you are unable to connect to and see if the problem still persists.

  To change the password of the user account follow the steps below.

  1. Click on Control Panel
  2. In the Control Panel select user accounts
  3. Under user accounts , select account management
  4. Under accounts , select change password

  Try the above steps and get back to us with useful information for assistance.

  Thank you

• password not accepted after that laptop wakes from sleep

  When my laptop is on battery power and idle for a while, it goes into sleep mode. When I want to start working again, Windows does not accept my password. I need to change username, then click on my profile (which displays LOCKED) and only then Windows accept my password.

  After doing a search on the net, I see other Windows 7 users have the same problem...

  Hi Sean, the problem may be that the NumLock key is on in your profile.

  Try this.  Hit the key Windows and r and type regedit and click ok.  Go to HKEY_CURRENT_USER\Control Panel\Keyboard and locate the InitialKeyboardIndicators value.  DoubleClick on it and change the value from 2 to 0.  Click ok and restart.

  Let us know if this helped.

  MVP (Windows desktop experience)

• Impossible to install the latest version of the username from adobe flash player & password not accepted

  Failed to install the latest version of Adobe flash player. My username and password are not accepted when trying to install. Someone has suggestions how overcome this apparently simple, but frustrating?

  This is the password for the admin on your own machine, it has nothing to do with Adobe Flash Player, the Adobe ID or this site.

  It's something that you have to solve yourself that Flash does not ask for your adobe ID install.

  Best regards

  Please do not forget to mark my post here useful or answered if I helped you

  Thank you

• Password not accepted at the opening of the installer of creative cloud

  Trying to open Installer creative cloud, he invites me for a password to allow the changes. However, it does not accept my password. The password that we should enter is the Adobe log in password? I am very sure of my password for Adobe log in is correct but I can't get past this.

  HEY Mei,

  I suppose you're on a MAC, please use your MAC administrator password.

  Hope this helps!

• PASSWORD NOT ACCEPTED WELL THAT RESET THREE TIMES.

  I AM TRYING TO INSTALL THE LATEST VERSION OF FLASH PLAYER, BUT IT WILL NOT ACCEPT ANY PASSWORD, EVEN IF THEY HAVE BEEN RESET

  THREE TIMES.  WHAT SHOULD I DO?

  flitter Bernard wrote:

  WHAT SHOULD I DO?

  Use the password: https://forums.adobe.com/thread/1619850

• Satellite A100 - BIOS password not accepted after computer take part

  (Sorry if this question has been asked before, I searched through topics, but too many subjects was found.)

  I have an old A100 for 3 years with no guarantee. I want to sell it so I took apart to clean dust. Everything for the motherboard. When everything has been cleaned and I reinstalled everything, I turned it on and the password of the BIOS has not been accepted. I know the password and it's OK to 100% and shift lock is not locked on.

  Is it possible that the keyboard flat cable has been installed wrongly, the cable was - a.f.a.i.k - reinstalled right, because there is only one way to insert into the slot on the motherboard. (Sorry for my bad English)

  Or BIOS confused and handed over to zero in some Toshiba service password? Is this possible?

  The caps lock is locking itself led of lights up and can not turn off with the CAPS LOCK key.

  What is the solution?

  > Is it possible that the keyboard flat cable has been installed wrongly,
  Connect the keyboard external usb to check (this is good if you remove the internal keyboard when checking)

  > Or BIOS confused and handed over to zero in some Toshiba service password? Is this possible?
  No, it is impossible that this password has been reset. In any case, I've never heard

• Office jet 8600 all-in-in-one: Admin password not accepted

  I cannot access the settings of administater, accepts no password.  The printer has all the features that are locked by the admin, I did not do... help!

  Hey @Kristy101,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with access to the front on your Officejet Pro 8600 e-all-in-one printer. I can help you with that.

  I'll send you some instructions describing how to perform a factory reset. You should see an email in your Inbox shortly.

  Please let me know if this allows you to access the menu. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Password not accepted

  My iphone 6 ceased to accept my password!  When I enter my password, the screen turns black with a circle of rotation and goes back to the password screen.   If I type a bad password the phone buzz and vibrate.  I reset my phone and saved on Itues without a bit of luck.   Any suggestions to correct?   I missed an important call from my school children yesterday because I couldn't open it listen to voicemail.   Thanks for your suggestions, you can provide.

  Try other methods in this article to resolve the problem If you have forgotten the password for your iPhone, iPad, or iPod touch or your device is disabled - Apple supports

• Cannot access hard drive Time Capsule... Password not accepted

  The device ' Time Capsule 802.11n (3rd generation).

  Subject: Unable to connect to the HD TC

  I've reconfigured our old Time Capsule (CT) for use by my daughter dependent of the College.  What with the TC seems to work fine (IE. Internet access and WIFI configured etc...).  I reformatted the HD to start from scratch.  And last updated as indicated by the Airport utility application.  The intention is to create a new WIFI area with backup (Time Machine).

  When you set up Time Machine I stressed the internal HD of TC, and then it says "connecting to etc...".  After a few seconds, a new mold box presents itself to ' enter your password for the server (name of TC) for Time Machine can access.  I enter the HD password I had setup in Airport utility with nothing doesn't.  I checked all passwords with Airport utility "Show passwords".  Tried all the passwords, and of course which none worked.  And Yes, I even try the previous passwords even if I had changed their

  I noticed that using the Airport 6.3.5 utility running on my OS X 10.10.5 machine I can see and change the TC.  But when I use another computer running 10.11.6 is the Airport 6.3.6 utility does not see the TC?

  Thoughts and comments please?

  Next step may be reset to the factory settings, but feel something going on here...

  Thank you

  Kind regards

  Roger

  (1) try to reset the password for the utility disk AirPort

  (2) open TextEdit on the Mac and type the password in plain text in an editor window.  This will allow you to ensure that all the keys on the keyboard are recognized.  I've seen cases where passwords fail again and again because of a problem with a wrong key on the keyboard or a habit of typing that makes you believe that you enter the password one way, but the result is something else.  Be able to actually see that typed password allows to check that.

• Administrator password not accepted in the login window. had a problem with rogue program. How can I reset the password or login?

  Stuck with a log in window on XP system. Had a problem with the thugs, XP Security 2012. My administrator password is no longer accepted. (I wrote it and also have a safety question.)

  How can I connect?

  Hi Annaba-m,

  Try the following.

  Step 1: Try to start in safe mode. Check if you can login as administrator.

  Step 2: If you are able to connect then try to change the password. Restart the computer in normal mode to see if you can connect.

  Microsoft Windows XP - overview of user accounts

  Microsoft Windows XP - Types of user accounts

• Password not accepted on Win 7 after that 10 Windows cannot install

  Update Windows 10 has been declined through process going... back to Windows 7 and now the password doesn't work.

  Windows 10 upgrade decreased original title

  Hi Porter,

  Thanks for posting in the community.

  We are happy to help you to provide the necessary assistance to help solve the problem.

  Before I continue, I would like you to provide the information below:

  1. do you have an error message when the installation failed?

  2. How have you tried to install Windows 10, via the update or ISO file?

  3. do you get an error when you enter the password?

  For now, if you own or have a Windows 7 installation disc, I recommend that you follow the steps below to make the Startup Repair.

  To use this method, you need to restart (boot) your computer using the disc or USB flash drive.

  1. Insert the USB flash drive or Windows 7 installation discor a system repair disc, and then turn off your computer.

  2. Restart your computer using the power button on the computer.

  3. When you are prompted, press a key, and then follow the instructions that appear.

  4. In the page install Windows, or on the System Recovery Options page, choose your language and other preferences and then click on Next.

     • If the page install Windows or the System Recovery Options page appears, and you are not prompted to press a key, you may need to change some settings of the system. To learn how, see start your computer from a disk to install Windows 7 or USB flash drive.

  5. If you use the installation of Windows or the USB flash drive disk, click repair your computer.

  6. Select the Startup Repair tool , and then click on Next.

  7. In the System Recovery Options menu, click a tool to open it.

  Hope this helps

• Unable to connect, password not accepted

  Hello. I can't do anything. He continues to ask for an administrator password. I tried to reload windows 8 and he asked an administrator password. I tried to load windows from a CD 8 and he asked an administrator password. No matter what I do same problem. And I tried all of my passwords. What I want is to use EVERYTHING without this password *. I have a few passwords and it refuses everyone. So I can't launch a new software, can't pass, can't do anything. I tried the help topics, but at one point, he asked an administrator password or gives me the maddening message, I need to have administrator privileges. It's my computer - nobody else uses it. I don't want to enter password NEVER. Why would I want to? Help, please! Thank you

  Original title: crazy password

  Charms, click on change PC settings, accounts, disconnect this account, in fact. Remember once you use a local account and upgrade to 8.1, which everyone must in January 2016 or loss of all the updates and new features - you will not be able to use the Store, more Apps, OneDrive and your settings will not be saved without a Microsoft Account (which requires a password). Hope this helps and if you need any additional aid station and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

  "When we try to take anything by itself, we find it hitched to everything else in the universe."-John Muir

  If this has answered your message please mark as answer.

• VCOPS 5.8 by default root password not accepted

  I use the combination of the root/vmware for installing as shown here:

  VMware vCenter Operations Manager 5.8

  And its telling me "vmware" is not the current password!

  the docs are wrong?

  Thank you!

  http://vmadmin.info

  Strange - it worked after the 4th time I tried...