Quality of the recording in sound recorder?

Similar Questions

• Windows 7 - audio system sometimes works and sometimes doesn't. Soundcard Question. Issue of the audio recording. Poor sound quality from the speakers.

  I connect on - the work of sound system very well.  Media player works fine.  The next time I log on - no sound system.  Everything is plugged, convenience store finds no problems, Media player goes through all the steps and looks that don't worry, still no sound.  I have download a fix for the VIA recommended by Dell Driver.  I did, and it still has the same problem.  I can close, reconnect, and then the sound will work.  Sometimes I have to close and log on twice in a row so he can launch.

  Can someone point me in the right direction to solve this problem?  I am working on a Dell Inspiron 546 AMD Athlon II x 2 215 2.70 GHz and 64-bit with 400 GB of RAM.  I installed Windows 7 but when I dug deeper into the service code for this machine which found at some point in time he had installed Vista.  This could be the same Vista to Windows 7 problem audio, everyone seems to have?  I bought this Staples announced new with Windows 7 as operating system.

  I did research on all forums and responses and am unable to check if I have a "sound card".  I'm not used with the terminology so even if I follow the Microsoft instructions to find the right place to check and see, I do not understand what I see when I'm there.  It is said: ATI high definition Audio Device and VIA High Definition Audio.  Is this to say that I have a sound card or I should get it a?  If I buy a sound card will it fix my audio problem?

  Even though I had my audio problem fixed, I was disappointed by the sound quality of the speakers on this new system up to date.  My speakers on my old computer (which lasted from Windows 98) were by far superior in sound quality.  I don't understand why they sound so crappy and barely louder, and when you show the to they have a rattle for them.  I tried plugging my old speakers on my new computer, but nothing happens.  My new speakers have a Plug and a USB port.  I don't know what is... why goal can not use my 'old'?

  Finally, I want to record my vinyl on discs and need a great sound system.  Any advice?

  I removed all the ATI Audio as suggested.  The result in the short term is that the audio quality is improved.  I no longer hear the "crackling" when the sound is turned on.  I'll answer more if the issue of audio (works) continues to be a problem because the fix.  If you don't hear from me, then please consider the problem solved and my thanks to you.

• The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Hel

  The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Help needed ASAP

  Hello

  Control Panel - SOUNDS - Audio peripheral devices configuration-manager

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version on the tab of the driver in the device as a sound Manager often restoring drivers, then install
  the current version. Restart and check after each try, not uncommon to have to run the pilot of 1 to 4 times or more.
  Just make sure that the version you have installed appears in the tab of the driver.

  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check show disconnected devices
  and show disabled devices - check your micro - highlight them, then lower right properties. Do
  of course the appropriate injector is enabled and check that other settings - on the levels tab make sure MUTE is not checked
  and APPLY / OK changes.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• How can I change the sound of the recording of mono to stereo?

  How can I change the sound of the recording of mono to stereo on my PC? Try to convert vinyl to my pc. I use Windows 7 64-bit on an HP PC.

  CL12

  Thanks, but I reloaded the software and it works!

• How to change the Windows Vista sound recorder

  Does anyone have information on how to editing can be done in sound recorder in Windows Vista, such as the removal of noise, etc. ?

  You would not be able to change the sound by using the Windows Vista sound recorder after recording is done, you would need a different for that one application. In this case, you can instead to fix the problem before registration, you can refer to the link below to get instructions on how to reduce POPs, clicks or other distortions.

  http://support.Microsoft.com/kb/936693

  For more information about how to troubleshoot audio recording in Windows Vista, you can check the link below as well.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-recording-problems

• The recorded sound volume is very low

  the recorded sound volume is very low... previous, it was good... Suddenly don't know why, he fell it please help

  the recorded sound volume is very low... previous, it was good... Suddenly don't know why, he fell it please help

  I tried to verify that levels under manage audio devcies... even all checked... but still not found a solution to this... Please help with several steps... I'll try each... Thank you

  Hi navnyu,

  (a) what software do you use to record audio? Using Sound Recorder in Windows Vista or any other third-party application?

  (b) what device you use to record audio? Micro analog video camera, CD player and DVD player

  You can check the volume settings on the device itself for the volume levels.

  Also check the settings of volume (if available) in the recording software

  Run the FIXIT available in the link below and check if that helps

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  Troubleshoot audio recording

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-recording-problems

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I accidentally delete the record microphone to sound property. sleekbook 14 tsb132tx

  help please, I accidentally delete the record microphone to sound property.

  where can I download the microphone for my sleekbook 14 B132tx TS.

  help please someone.

  Thanks in advance.

  Hello

  Do a right-click the speaker icon in the taskbar, then select recording devices.

  Right-click on an empty area of the next window and enter a tick against the "Show disabled devices" and "Show disconnected devices".

  If your microphone will now appear in the list of devices, right click, and then select activate.

  Kind regards

  DP - K

• Unable to adapt "record level" for the sound recorder. Audio system works very well. Cannot find a software which allows the change to the record level of mic.

  I want to increase the logging level for my sound recorder and cannot find anything in the Windows 7 software that will allow me to do. I know that it's there somewhere because I put it at 50% during a recent troubleshooting session when he was at zero. Now, I find that the screen to increase it even more.

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  You can try the steps below and check if the problem is resolved.

  To adjust the record volume, follow these steps before you register:

  1. click on Start

  The collapse of this top this i, and then click Control Panel.

  2. click on hardware and sound.

  3. under his, click manage audio devices.

  4. click on the recording tab.

  5. click on the microphone device and then click Properties.

  6. click on the tab levels move the slider to increase or decrease the volume.

  If you find difficulties in following the above steps then you must follow the link below.

  The volume of the audio recorded by sound recorder in Windows Vista or in Windows 7 is lower than that of Windows XP.

  http://support.Microsoft.com/kb/973446

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• How do you get "microphone" back on the recording of sound control Panel tab?

  Hello

  In the Panel--> equipment and audio--> Audio to manage devices--> recording tab.

  I accidentally deleted icon "microphone."  How can I get it back?  Is it possible to download it (couldn't find Googling).

  I want to restore the computer system to an earlier point to a problem that I face, but it seems that I am incapable of being given that I deleted this driver or software?

  Thank you!

  Hi Mary_Anne T,.

  Welcome to the Microsoft community. According to the description of the problem, you want the "microphone" back on the recording of the sound options tab.

  Follow these steps and check:

  (a) go to Start, Control Panel, sound, recording tab.

  (b) do a right click on a box empty and make sure you show disconnected devices and to see the disabled devices are checked.

  (c) if the microphone now appeared there, right-click on it and select Activate and set as default device.

  I hope this helps. Let us know if you need more assistance.

• record the record

  I recorded on the built-in hp recorder windows 8 envy but can't find a way to save - it allows me of name it and when open recorder there, but where to turn to an e-mail or elsewhere cannot be found - what to do?

  Hi @genmyo ,

  Welcome to the HP Forums!

  It's a great place to find answers and information.

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that you used the sound recorder in window 8 to make a recording. It allowed you to name and when you open the recorder it is there, but you don't know where it is.

  Here is a link to Sound Recorder app for Windows 8: FAQ applies to Windows 8.1, 8.1 RT Windows (Windows). Please click on 'Where are my saved record?' to expand the list.

  If you click on "How do I share my record", you will see how to share or add as an attachment to mail you.

  I hope this has helped.

• How to increase the recording time

  Initial term of the title: Recvord
  I would like to extend the recording time is included in XP. It will be released in 3 hours. How can I do that. If I can't do this, then how RIP with Media Player 11

  Initial term of the title: Recvord
  I would like to extend the recording time is included in XP. It will be released in 3 hours. How can I do that. If I can't do this, then how RIP with Media Player 11

  ================================
  XP Sound Recorder is limited to 60 seconds.

  The free Audacity software may be worth a try.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Audacity
  http://Audacity.sourceforge.NET/

  Recording with Audacity
  http://Audacity.sourceforge.net/manual-1.2/tutorial_basics_4.html

• too big to burn disc the recorded tv file

  Hi, I have a 5 hour tv program (recorded on Windows Media Center, Windows XP & about 9 GB) I would like to burn to a disc, but the largest disk, I found is 8.5 GB & library will transfer all the data. I am mainly interested to save the 1st 3 hours or so, but don't can't find a way to reduce the actual file in the library. Any suggestions please? Thank you.

  Hello

  If you want to burn only the first three hours of the saved file, then you can use Windows Live movie maker and trim video. See the link below which holds information about the same. Windows Live Movie Maker Help Center: http://explore.live.com/windows-live-movie-maker-trim-video-how-faq

  If you want to burn the full TV then show you may have to use your favorite search engine and search for a software that will help you to compress the size of the file. But I'm afraid, compress the file size can reduce the quality of the video display.

  NOTE: Microsoft cannot guarantee that problems resulting from the use of third-party software can be resolved. Software using third party is at your own risk.

• Tape recorder in XP was FAR superior to Vista. Is there a way to download the recorder XP?

  As I said in the title, I have just moved from XP to Vista and was shocked when I opened the tape... one of the MAIN features I use when organizing the music, or the creation of such... I would hum into the microphone, rearrange edit cut paste segments bit (slow, double speed, reverse, two tracks of layer to get a tone of duality...) until I have something that resembled what I wanted, then transpose into a song Editor...  Why did I use so much? He WAS free.

  Is it possible to download the OLD version of the tape recorder that was on XP?

  Hello Baereon,

  Thank you for posting.  I searched and found that the XP version of the recorder is not available for download at this time.  With regard to the way in which you can get a free version of the software that would have the same characteristics and ability, I would say that you use Bing.com or your search engine preferred to find XP sound recorder.  This should give your various feasible options.

  Please let me know if this helps you. Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to select the recording device in Audacity

  Audacity preferences

  In Audio i/o in Audacity my tent to follow preferences set up the tutorial, the recording device box sucks a selection. Is it because my headphones is not connected at this time? However, just like in the tutorial section playback device IS first filed with the phrase OUTPUT of MAPPING MICROSOFT SOUND. What is c? And, in the tutorial MICROSOFT SOUND INPUT MAPPING is a selection option in the box of the recording device.  In my control PANEL, I double checked my USB audio device is active and functional. Why don't my box preferably says Microsoft Inpu acoustic mapping or something because my webcam is currently connected and it has audio, right? What to do to move forward in the implementation for MP3 at this rate?

  Hello

  According to the audacity of the site audio manufacturer is not compatible with windows vista however, there is a beta version, the customer may install follow the link below:

  http://Audacity.sourceforge.NET/Download/Windows

  I hope this helps.

• Audio Studio LE-how adjust the recording settings

  Help to install a SONY USB turntable

  Hi all -

  I just got a SONY USB turntable and hooked up with the software (Audio Studio THE), when I recorded it, I picked up a lot of other noise that has mastered the music from the disc.  How can I set my system so that it captures only the record music and not the environmental music?  Thanks in advance

  Laurent of Norwalk

  Hi Laurent,.
   
  1. have you installed the device USB stereo turntable with success?
   
  There might be some recording settings in the Audio Studio software THE. We recommend that you cross check if all unwanted settings are applied that captures the external sound and change accordingly.
   
  See Install a USB device
   
  See Audio recording in sound recorder: frequently asked questions
  You can also contact the Team Sony
   
  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.