Cannot find new_domain in BPEL Process Manager

Similar Questions

• BPEL Process Manager 10.1.3.3 on WLS 10

  Hello
  
  I just wanted to know if BPEL Process Manager 10.1.3.3 is compatible with WLS 10.
  I found the link for BPEL Process Manager 10.1.3.3 with WLS 9.2 below.
  
  http://download.Oracle.com/docs/CD/E10291_01/ doc.1013 /e10538/WebLogic.htm
  
  
  I just wanted to know if the installation procedure for the BPEL Process Manager 10.1.3.3 installation with 10 WLS is different and if so
  So where can I find the installation procedure.
  
  Concerning
  Harish

  It is not certified, you need to install on 9.2.

  I think that it will be delivered in 10.1.3.5 which should be out before June 1.

  see you soon
  James

• Queryu for the bpel process manager

  Hi, what is the difference between the avilable process manager bpel in SOA and bpel process manager available separately? Equals console bpel and bpel process manager?

  So in short, there is nothing different in the stand-alone version and the version that are delivered in SOA Suite.

  The release of SOA Suite comes from the beams with all other products.

  see you soon
  James

• Integration of BPEL Process Manager and jDeveloper

  I downloaded BPEL Process Manager 10.1.3.1.0 but BPEL Designer is delivered is no longer with her and it integrates with jDeveloper 11g. Is there a version of BPEL Process Manager that I can integrate with jDeveloper Studio Edition Version 11.1.1.0.0? I have to use jDev 10g in order to use BPEL Process Manager. Please forward your comments.

  The JDeveloper and SOA Suite / BPEL version must remain in phase with each other, this includes minor versions, e.g. JDev 10.1.3.4 must be used with SOA Suite 10.1.3.4. Unfortunately the 11g JDev is not certified with the 10.1.3.1 SOA Suite.

  If you just install SOA Suite, it may be a good idea to upgrade to 10.1.3.4 until development is underway.

  see you soon
  James

• Access the content of BPEL Process Manager to a java class

  Hello
  
  Is it possible to access the API of a class of java process manager stand alone... My requirement is as follows. I need to run a script in the Unix environment, which will in turn call a java class and pass some parameters like username, password and Networkid processName. This java class must call the APIs necessary to authenticate the credentials passed, choose current examples of the ProcessName spent and bulk to abandon their...
  
  I tried to create a class of my java class Locator Networkid, password and IP address. But I had a communication Exception like this: 'javax.naming.CommunicationException': cannot find SerialContextProvider. I guess that Im not no definition JNDI properties and other places for FinderBeans in DomainAuth...
  
  Can someone help me on how to go to the definition of the JNDI properties and other locations of resources...
  
  
  
  Thank you
  Corinne

  Baudelaire,

  See the following forum thread:
  Re: Querying Oracle BPEL process Instances using BPEL client api-default

  Diakité
  http://SOA-HOWTO.blogspot.com

• Cannot find download for 11g Enterprise Manager for * Windows *.

  Jin
  
  I installed database 11g (Enterprise 64-bit) for Windows
  
  So far, I have not been able to find the download for Enterprise Manager 11 g for Windows.
  
  
  This has the Unix http://www.oracle.com/technology/software/products/oem/index.html
  
  Where is the download for Windows, please?
  
  Thank you. John

  Hello

  This command is to create if you don't have it.

  Check like that

  emctl status dbconsole
  

  Concerning

• BPEL Process Manager developer - issue license

  My company is licensed for BPEL PM and there on several servers. I'm a developer to create programs for my business I'm official... not a contractor. All programs are deployed to our development servers.
  
  I want to install BPEL PM on my laptop. This would allow me to put offline and also to work around any problems that arise on the development such as table querying server or queue crashes and necessary reboots, etc.
  
  The installation of BPEL PM is allowed free of charge on a pc developer for this situation?

  Technically no, but you can be covered by the OTN license. When you download the software from OTN you sign a contract. IF you feel that you are covered in the present virtue then go nuts.

  How customers is generally have licenses processors, for the production and the user Named for development license test, etc. You need a minimum to 10 named users per CPU of your dev to test environments. If your company has purchased more then you could use some of these licenses, but remember you will have 10 not one as it is a new machine.

  see you soon
  James

• In the bpel process one-way transaction management

  Hello
  
  I created a one-way bpel process with oneWayDeliveryPolicy property - property Sync and transaction - required. When I exposed this service as a SOAP service, I see well The Participation of Transaction in the Web Service adapter in the way of exposed Services configured as EVER. Is this to say that BPELCallee would not participate in the same transaction as the appellant BPEL?
  
  Aditya

  Hello

  Properties refer to the support of different transactions "contexts", as you can see in the documents below. The bpel.config.transaction refers to the semantics of Transaction BPEL Process Manager, while the 'Participation of the operation' refers to WS-AT , which provides interoperability of transaction between Oracle WebLogic Server and transaction of other providers services... I've never tested it myself, but I guess that if you process BPEL transactions, the bpel.config.transaction will prevail...

  http://docs.Oracle.com/CD/E23943_01/dev.1111/e10224/soa_transactions.htm#CHDEHCFE
  http://docs.Oracle.com/CD/E23943_01/dev.1111/e10224/sca_bindingcomps.htm#SOASE86071

  See you soon,.
  Vlad

• How a BPEL process instance knows you cancel (ed)?

  The javadoc for the cancel() method IInstanceHandle said: "When an activity is canceled, the performer of the activity is informed of the cancellation and has the ability to restore or cancel any work that has been done in the name of the activity."
  
  How is the user who performs the notified activity? A kind of fault? It can encode a Manager 'Cancel' in the BPEL process, or the "rollback or undo" everything is done behind the scenes?
  
  Either a complete response or a pointer to the appropriate documentation (that I still could find) would be nice. Thank you.

  The BPEL instance can be cancelled via the BPEL API or through the console (Abort instance) or due to an error. Then the BPEL Process Manager detects this and cancel the currently running instance. The instance will make a cancellation of transaction, depending on whether it was a global (XA) or local transactions. This entire mechanism is run behind the scenes.

  Marc

• 101202 BPEL process (Oracle AS) of the migration to SOA Suite 11 g (WLS)

  Hi all
  
  I am looking for more information on the migration processes BPEL developed using 101202 BPEL Process Manager struggle to run on AS Oracle 10 g, Oracle SOA Suite 11 g running on Weblogic Server.
  
  Pointers is very appreciated.
  
  Thank you
  Anish.

  Looking for info on integration OSR 10 g and SOA Suite 11 g I found this link (http://docs.oracle.com/cd/E12839_01/upgrade.1111/e10127/upgrade_soa_apps.htm) that might help you.

  Published by: alfredozn on November 15, 2011 11:26

• BPEL process hangs for hours and hours after the service call web sync

  I would like the web service call time out if it crashes it

  or a process that calls a Local or a remote WebService, it is necessary to set a time limit of 10 seconds that the BPEL will wait for the response. If no response is received within the time-out period specified, then a series of activities is performed (for example. WebService not available, end of the BPEL process, etc.).

  At the top of screen, "WS_Call" is the call to the WebService.

  2. in the sequence where to call 'WS_Call' activity, add a branch of wrestling:

  and set its properties to catch a RemoteFault.
  It is necessary to take a RemoteFault because this is the type of fault that throws the "timeout" which will be defined in the next step when the time-out expires.

  3. switch to the Source Jdeveloper tab and look at the code that has been added to the Bpel project as instructed by top 'Step 2 '. The added lines should look like the piece of code below:
  
  
  
  
  
  
  

  In the branch of wrestling, the error can be treated: complete the process, insert a response/answer to return from the Bpel, an Assign activity and continue the Bpel, etc..

  4 set the "timeout" for the PartnerLink to 10 seconds.
  "Timeout" specifies the number of seconds to wait before expiry. A distance error is thrown if this happens.

  If the Web service is located on the SAME host as the BPEL, it is also necessary to set the property "optSoapShortcut" to FALSE.
  The parameter "optSoapShortcut" is by default = TRUE. It should be set to FALSE to force local SOAP to go through SOAP instead of internal calls request.

  Note: Step 4 can also be directly configured in bpel.xml in the partnerLinkBinding section:
  
  5
  fake
  
  

  5. recompile and redeploy the BPEL process.

  References:

  (a) the Timeout parameter is documented in:
  Guide of Oracle® BPEL Process Manager developer
  http://download-East.Oracle.com/docs/CD/B31017_01/integrate.1013/b28981/appx_deploydesc.htm

  (b) optSoapShortcut is documented in:
  http://download.Oracle.com/docs/CD/B31017_01/core.1013/b28942/tuning_bpel.htm#sthref496

• SOADEMO: How to start the Application BPEL Process Manger Worklist on Linux

  Chapter 3 of the SOA Suite Quick Start Guide tells the user to start the BPEL Worklist Application (step 3.1.1) and lists the instructions that are clearly intended for Windows:
  
  
  
  
  
  < p >
  {color: #0000ff} To start the Application from the list of tasks:
  
  {color} < strong > {color: #0000ff} 1.Select Start & gt; All programs & gt; Oracle - Oracle - soademo & gt; Oracle BPEL Process Manager & gt; Task list application.
  
  
  
  {color}
  
  < facilities > I don't see any instructions for starting the application from the list of tasks in a Linux environment. I found nothing like the screen "BPM Worklist" indicated in the Guide: I can access a page 'BPEL Control' from the homepage of SOA demo, but this page doesn't seem to be something like the screen BPM Worklist documented in the Quick Start Guide.
  
  
  
  Can someone help me out here? Thank you.
  
  
  
  
  
  
  
  
  
  
  
  < /p >

  Hello

  Try:

  http://host/int integration/worklistapp /.

  Best regards, Ronald

• HP SoftPaq manager cannot find: HP ProtectTools Security Manager 7.00.

  HP SoftPaq manager cannot find: HP ProtectTools Security Manager 7.00. Nor can I.  Any suggestions? HP8760w

  I just can't understand why HP hide this update. It blocks other updates of the installation.

  Any suggestions are welcome.

  "Cannot install this security application until the HP ProtectTools Security Manager 7.00 is installed."

  KR

  Wim

  What operating system do you use? Found this for Windows 7:

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?lang=en&cc=us&swItem=ob_106118_1

  Security Manager 8.0 Windows 8 downloads page for the 8760w version. Should work on your laptop if you run Win 8.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_116000_1%257CswEnvOID%253D4132%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• "The system cannot find the specified file" error when you try to install a hotfix/cab package using the DISM tool Package Manager

  I'm testing the integrity of the addon ".cab" packages and patches by installing using the Package Manager (pkgmgr.exe), or alternatively, the Deployment Image Servicing and Management Tool (DISM.exe) for Windows 7.  To do this, I am aware that I have to call a tool through the command line.

  In the Package Manager, I use the syntax

  Command prompt > pkgmgr.exe /ip /m:C:\Test\test.cab

  Otherwise, I might add the path in quotes:

  "Command prompt > pkgmgr.exe /ip /m:"C:\Test\test.cab.

  The error returned in pkgmgr is:

  Operation failed with 0 x 80070002.  The system cannot find the specified file.

  My first impression was that my syntax is incorrect, although I can't have room for error.  The path points to "test.cab" which is a renamed windows addon that contains the necessary file "svcpack" and the file "entries_XX.ini".  I used several different ".cab" file, that which some I know to be genuine, hopefully exclude the possibility of a corrupted or incompatible file.  I also tried this procedure on different computers and received the same error code, so I doubt that the tool pkgmgr istelf is corrupt.

  Finally, I tried an alternative Windows 7/8 DISM tool to try to achieve essentially the same task by using the following syntax in a command prompt:

  "Commnand prompt > DISM.exe / Online /PackagePath:"C:\Test\test.cab Add-Package ".

  This produces a similar error:

  An error occurred trying to open it - C:\Test\test.cab error: 0 x 80070002
  Error: 2
  The system cannot find the specified file.
  The DISM log file can be found at C:\Windows\Logs\DISM\dism.log

  I'm really not sure why I produce these errors.  Any idea is appreciated.

  Hello

  Thanks for posting your question on the Microsoft Forum.

  I suggest you to ask your question in the TechNet forums.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking&filter=AllTypes&sort=lastpostdesc

  TechNet is watched by other computing professionals who would be more likely to help you.

  I hope this helps.

  _________________

  Thank you best regards &,.

  Isha Soni

• Cannot manage libraries. Cannot retrieve CD using Windows Media Player 12, error '"Windows Media Player cannot find the file'

  Original title: WMP 12 won't fill the library, allow me to manage the libraries, or it is for me to rip music

  WMP 12 is unable to find my music files; When I select > Union > manage libraries > music (or any other library), nothing happens. If I try to extract a new music CD WMP will not let me select a location to store the file torn; If a test of tear, anyway, I get an error message saying WMP "Windows Media Player cannot find the file.

  Through the windows, I can see my music library and that it complements filled with many good things and play music that is then added to the library WMP one track at a time. But that bat rather point to WMP.

  I have added and deleted folders from the libraries of music, I used different hard drives, I used the store to library WMP and I installed and uninstalled and reinstalled WMP three times, I tried using WMP with and without Windows Media Center. Nothing helps. Any ideas?

  Hi Watford CVS,

  Try to enable and disable Windows Media Player and check the result.
  Step 1: Disable Windows Media Player
  a. Click Start, type optionalfeatures and press to enter.
  b. in the list of objects, expand multimedia functions.
  c. uncheck Windows Media Player and click ok.
  d. restart the computer so that the changes take effect.

  Step 2: Turn on Windows Media Player
  a. Click Start, type optionalfeatures and press to enter.
  b. in the list of objects, expand multimedia functions.
  c. place a check on Windows Media Player, and then click ok.
  d. restart the computer so that the changes take effect.
  e. check if the problem persists.

  See Or turn off Windows features turn on

  Visit our Microsoft answers feedback Forum and let us know what you think.