Question about Acrobat with InDesign CS4

Similar Questions

• How to set up default InDesign CS5 in the system with InDesign CS4 has the default value?

  How to set the application default .indd InDesign CS5 when you installed CS5 and InDesign CS4 and InDesign CS4 is the current default (InDesign CS4 has been installed after the installation of CS5)

  Thanks, but I already tried at first, but is not effective.

  I think that its because of this reason:
  The two - InDesign CS4 and InDesign CS5 have their application/program/exe named "indesign.exe".

  Installation of either InDesign CS4 or InDesign CS5, sets a default for the 'indesign.exe' Windows path. In this case, since InDesign CS4 was installed later (after InDesign CS5 was already installed), the "indesign.exe" which has been staged "Indesign.exe" of InDesign CS5 has been replaced by "Indesign.exe" of InDesign CS4.

  But after long google and searching through regedit, I have the solution:

  1. Search for HKEY_CLASSES_ROOT\InDesign.Document\Shell\Open\Command in regedit
  2. Change the value of the attribute (default) for "C:\Program Files (x 86) \Adobe\Adobe" '%1' / / including the quotes

  Post edited by: Vidit Kothari

• Question about Threads with WHILE and FOR

  Hi all
  
  I have a question on threads with a loop on this topic sentece.
  
  Have the following class:

  class test{
  
  bool foundThing;
  PararellSearch(string [] lista, string s2find){
  while(!foundThing)
  {
  for(int i=0;i<lista.length;i++){
  if(s2find==lista){
  
  foundThing = true;
  
  break;
  
  }
  
  }
  
  }
  
  }
  If I start 10 threads which are using the PararellSearch method to look into lista, each of them inits into a different point, and when some of them found the right word then set foundThing= true. It will stop WHILE and FOR loop in all the threads? 
  If not, how could I do it?
  
  Thanks a lot for your help.
  David.
  
  Edited by: user13553506 on 27-dic-2010 12:15
  
  Edited by: user13553506 on 27-dic-2010 15:54                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    
  			 
  When you post the code, you'll want to post a [url http://sscce.org] NBS so that it is clear that what you try to do it. For example:
  1. in the validation of code, put {code} before and after him, then he will be readable.
  2. the convention in Java must start with a capital letter class names, so test, could not test.
  3. the convention in Java is to start with lowercase letters, so parallelSearch, not PWhateverMisspellingYouHaveThere method names.
  4. There is no such thing as bool. It is a Boolean.
  5. it is a String, not string.
  6. never use == to compare the States of objects (such as the content of the strings). Use equals().
  To answer your question: If you create Test 10 objects, then, given that foundThing is an instance variable, there will be 10 variables entirely independent foundThing. An adjustment will not affect the other. In this case, the easiest thing to do would be to foundThing static, so that there is only one copy which is shared by the Test class as a whole. This isn't the only way, or even the best way in all cases, but you have enough other problems to face, so for now to keep things simple.
  Finally, when you have a variable that is shared by multiple threads, you need to either make all the access to this variable synchronized on the same lock (reads and writes), or you need to declare the volatile variable.
  		   

• Upgrade memory PC 2 GB to 4 GB - problem with Indesign CS4

  I use Indesign CS4 on a PC (XP Professional SP3) that has 2 GB of memory. InDesign would go, but it has been slow, so upgraded to 4 GB. InDesign is running, but when we try to cut the text on one application and paste it into the document Indsign, he hesitates for a second or two before finishing the task.

  Is there some settings in Indesign to be considered in the upgrade memory? Any help or thoughts on this would be appreciated.

  I don't think that the problem is caused by InDesign.

  Look at this link http://coreldraw.com/forums/p/7802/64716.aspx

  Concerning

• 2 questions about V2V with Converter Standalone 4.3

  I have an s on esx 4.0 with some VM Windows production environment.  Esx 4.0 host are moving to a new location with scheduled within a few days.  To minimize the impact that I had planned to get up a VM host and V2V temp the VM, then when the original kit back in his new house them V2V.

  I just built a temp esxi 4.1 host and did a V2V test that went ok (ish). The main problem I encountered was that the static IP address is not used.  So my 1st question is: is it possible for a migrated VM keep its static ip address configuration?

  Secondly, will I encounter any issues V2V ing those VMS back to an old version of VMWare is i.e. esxi 4.1 = > esx 4.0?

  not upgarding vmware tools might work around this or it would be perhaps better to stand at another temp esx 4.0 Server?

  Thank you very much

  It works without any problem - there are no traps.

  If you are worried about it, clone a virtual machine and copy the files for the cloned VM, then run it on the new ESX as a test.

  You do not have a lot to focus on

• A really basic question about fonts in InDesign

  I'm new in the world of graphic design and teaching myself by trial and error and Lynda. One of my biggest problems in my project design is the selection of fonts. There are about 4 million, six hundred, two hundred twenty two thousand and seven policies .2 in the world and see that a 8 points of the just "Sample" version is not made for me.

  I'm reluctant to apply each police to turn my text to see what it looks like. When searching the Web, fonts displayed in the glory of the point 20, require at least a download, if it's not a transaction by credit card as well. Am I missing some obvious sign that facilitates the selection of fonts Manager. Perhaps a preference secret which could consolidate at least of fonts by family instead of alphbetically?

  Please help before go me blind. My eyes are starting to cross.

  Thank you! in advance for your Help.

  Oh Steve it is a better way to see the live type games, not black.

  Since InDesign Secrets.

  Select the text frame with the direct Selection tool, by clicking in the character Panel. Use the arrow keys Ko, high-low, to see the change of type of live.

  

• Question about area with a rug code * a DVD-RAM UJ - 841 S

  Hello!
  I have a Toshiba Satellite with a CARPET * a DVD-RAM UJ - 841S. Someone knows something about the firmware for this? I tried to use dvd43 and VideoLAN, but it does not work properly!

  I guess you do you want to Flash the firmware to remove the region code of the DVD player.
  Am I wrong?
  Don t do it! It risky s.
  If you update the drive with the wrong firmware or is not compatible the drive is not able to read/write to the media; CD and DVD.
  In addition, the use of the incorrect firmware will avoid the reorganization of the training by the BIOS.

• Question about WPA with lan card wireless in a Satellite Pro 6100

  Hello world

  I wish toshiba Australia had a cool site like this... It's fantastic.

  In any case, I just buy a kit (PA3189U-1MPC) wireless lan card for my laptop and network connection problems wireless of the University. The tech guy he says I need to have installed a wpa driver, and then I would be set for the use of bandwidth United.

  Anyone know where I can get a newish driver? I can't find anything anywhere...

  Thanks for any help,

  Jonno

  Hello

  First of all, it is very nice to read you like this forum. ;)

  So my friend from Australia, at first I must say that you use right and compatible WLAN card on your older laptop, but now I have to disappoint you. According to the specification, it is not possible to use WPA encryption with this card.

  Really, I don't think you can solve it with the new driver. I have newer computer Tecra laptop and I've tried everything but to no avail. Best solution for you is to use external USB WLAN stick. It will be much better for you. Initially, you can use WPA encryption and with the new card, you can use faster standard G and download speed will be much faster as with integrated WLAN card.

  Maybe you should think about it.

  Bye and good luck!

• Question about ASA5510 with AIP10

  I installed ASA5510-AIP10 with on our customer site. But I have 2 problems.

  First of all, I don't see no giga0/1(backplane interface) AIP10 traffic.

  Can I configure ASA5510 configuration? I already configured configuration associated AIP10 group virtual sensor and interface of remote sensing. Unfortunately, I can not all traffic.

  When I entered 'show int gi0/1' 10 AIP, it displays a number of the traffic count is zero.

  Secondly, AIP10 cannot do update of signature on automatic ftp server. When I inspected the package through tool Ethereal, disconnected AIP10 Server ftp after ftp 'LIST' command session is submitted to the ftp server. Maybe, I think that AIP10 didn't present 'Get sig.pkg' after her present "LIST".

  What should I do? Is - this hardware problem of the AIP? I would like to know about the above.

  Kind regards

  Get monitored traffic requires two configuration on the ASA and the SSM.

  It seems that you have completed the configuration of DFS.

  Now you need the corresponding configuration of ASA.

  http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/csids/csids11/cliguide/clissm.htm#wp1033926

  This is more easily by adding the lines of configuration "ips" in your policy map existing on the SAA itself.

  Once the ASA is configured, then the package counts on gig0/1 interface of the MSS should begin to increase.

  With regard to the problems of FTP server with automatic upgrade:

  The first thing to do is use the command 'upgrade' to the CLI to do a manual upgrade from the FTP server. This will ensure the name of user and password and directory settings are all correct for what you're trying.

  Once the manual works, then use the same settings for the automatic update.

  If the automatic update does not work, then check that this directory Unix style listing is used. The automatic update does not work when the style of the output of the Windows directory list is used. It is usually configurable on most Windows FTP servers.

  Also check out the "events to see the" while the sensor is to check the ftp server. The sensor will report on its findings. If he says that no updates have been found, check that you have a new update on the ftp server and ALSO make sure that the updated name is exactly as it appears on the ORC. Some users have inadvertently changed the name or the ftp client changed file names. The biggest problems we have seen is that capital letters are made lowercase.

• Question about images with Bootstrap galleries

  I watched the tutorial, I might add is very nice:

  Bootstrap Modal + Carousel Gallery - http://alt-web.com/

  And a number of questions:

  1. on the 'DEMO', there are 6 images. All images must be shown or may be just 1 image that when you click on the modal will load containing the remaining images?

  2. If you want to add more than 1 Gallery, do I need to recreate the full tutorial for each gallery? I have 5 different galleries.

  Thank you

  John

  jodmcc49 wrote:

  I watched the tutorial, I might add is very nice:

  Bootstrap Modal + Carousel Gallery - http://alt-web.com/

  Thank you to say, John.   I appreciate it.

  1. on the 'DEMO', there are 6 images. All images must be shown or may be just 1 image that when you click on the modal will load containing the remaining images?

  You can call the modal window to open a single image or a button, if that's what you want.

  jodmcc49 wrote:

  2. If you want to add more than 1 Gallery, do I need to recreate the full tutorial for each gallery? I have 5 different galleries.

  The way I structured this tutorial in particular, you should be 5 modal windows with a unique ID.

  • myModal1 - contains carousel1
  • myModal2 - contains carousel2
  • myModal3 - contains carousel3
  • etc...

  If you are good with AJAX/jQuery, you could call the Gallery carousel appropriate in a single Modal with GetElementByID instruction component.  But it's another tutorial.

  Nancy O.

• Question about backup with VDR 2.0.2

  Hello

  Excuse me for very low knowledge on this argument.

  I have a very simple question. If I made a backup of a motor home on Windows Server virtual machine and I create a folder on this machine between the time where VDR create the snapshot and the time of the end of the copy, when VDR remove the snapshot, the folder will remain on the server? All the changes I made on a virtual machine in the VDR copy will be lost or before to remove the snapshot, the changes will be merged with the original disc?

  Thank you very much.

  Hello

  the disks will be merged. If your changes are not lost.

  The backup however of course only will contain data up to the point when the snapshot was created.

  Concerning

  Tim

• Questions about player with W xp und XP-Mode (2 people)

  Hi all

  I had to install an old programming (EP) in Windows XP Mode environment, because he made more runs on W7prof. In this installation the EP doesn't also run smooth as before on a computer with W xp (host). I would check now if the PE installed on xp W in a VMware Player work better. Before you begin this task on a computer with 64-bit W7prof, I have the following questions:

  1.) is it possible to install VMware Player on a computer where Windows XP Mode is already installed? (I would like to delete the XP-Mode only when I know that the short EP smooth on the VMware Player).

  (2) if the answer to 1.) is Yes: is there any significance if during the installation of the VMware Player Windows XP Mode is active (open) or not?

  3.), it is apparently possible to install xp on VMware Player W using the existing Windows XP Mode. Is this possible if Windows XP Mode is already installed?

  (4.) if the answer to 3.) is Yes: is there any significance if during the installation of xp W on the VMware Player Windows XP Mode is active (open) or not.

  5.) are there any other important aspects to consider, or y at - there somewhere a step by step instruction?

  Thanks in advance for your help.

  To the GATHERING

  If you want you run Windows XP Mode in VMware Player, then Windows Virtual PC and Windows XP stop nearby.  Then, you will need to install VMware Player and VMware vCenter Converter Standalone, installed with the selected (Advanced) Server installation option.  Then in VMware Player, select player > file > import Windows XP Mode VM... and follow through.  Once complete, you will have Windows XP Mode in the list under the House.

  NOTE: The Virtual Machine Windows XP Mode created in this way is a linked Clone and is linked to the file "Windows XP Mode base.vhd" and as such, you can not continue run Windows XP Mode Windows Virtual PC, unless you manually make a copy of the "Windows XP Mode base.vhd" file to another location and then change it properly the DescriptorFile disc shipped to change file 'Windows XP Mode.vmdk' 'parentFileNameHint =' option to point to the file copied manually "Windows XP Mode base.vhd" to its new location.  Note that this work around will not be permitted by the agreement to LICENSE Windows XP Mode, I have no read lately to see if it does not allow for what would be technically be two now also installed separate from Windows XP Mode.

  If you do not make a copy and edit properly the embedded disk DescriptorFile then once you decide whether or not you will not use VMware Player to run Windows XP Mode more then you can remove the Windows XP Mode virtual machine in VMware Player and continue to use it in Windows Virtual PC

• Question about hosting with Adobe

  Question: I have a membership with Adobe Creative, which gives me the opportunity to host 5 sites.   If I exceed this number how much does it cost to host each additional site please?

  After 5 sites, you will have to pay for each site that depend on site map.

  Price: http://businesscatalyst.com/pricing/monthly

  Plans for the site: http://helpx.adobe.com/business-catalyst/kb/detailed-plan-breakdown.html

  Thank you

  Sanjit

• Send questions about Acrobat Pro XI and Adobe.

  A subscription to Acrobat Pro XI I gives me the same functionality that I would get Adobe send, Yes?

  Hi Fgrths2,

  Subscription send XI Pro and Adobe Acrobat are two different subscription. Acrobat XI subscription you would help to edit and modify the PDF but would not send large PDF files, for that, need you a different subscription to send Adobe.

  I hope I'm clear here.

  I would like to know if you have any further questions.

  Kind regards

  ~ Dominique

• Questions about synchronize with the database.

  Hi experts,
  
  With the help of Jdev11.1.1.5.0 - adfbc-oracledb10g
  
  I got quite stupid question.
  
  but I need to ask this question here.
  
  while I give make a right-click to eo synchronize with the database. EO get the newly created field.
  
  I had a vo is dependent on the OS. the vo not update how can get the field. ?
  
  Someone can help me.
  
  Published by: ADF7 on March 12, 2012 21:02

  ADF7,

  You don't the you in your VO up to you to add attributes manually. VO is supposed to be some specific use cases and so in general do not need all of the underlying fields of the EO. You can add them by going to the VO and the shuttle of new fields in the attributes list.

  John