Question about hosting with Adobe

Similar Questions

• Another question about printing with Adobe Reader 10.1.2

  I use Adobe Reader with Windows 7 (32 bit) 10.1.2 to print on my HP Officejet 6000 and was very happy to see that she is automatically printed on both sides of the paper and paused to give clear instructions on how to reload the paper to print on the other side, and everything worked fine. Until one day, with the same settings (unless I accidentally hit something) printing returned to his old ways: Although the dialog box print on both sides of the selected paper, it print on one side. I resorted to the ancient practice of trick the printer by limiting the paper, then when he expired, put in the pages had been printed on one side, to print on the other.

  How can I restore drive 10.1.2 to his original behavior?

  It might be the setting of the printer was set to ensure that duplex printing is more would be and its replacing the printer dialog box settings.

  The printer, check to make sure that duplex printing is turned on.

• Question about hosting a SERVER BUKKIT

  Original title:

  Minecraft

  I heard recently that MICROSOFT bought MOJANG so I have a question about minecraft

  I am an a BUKKIT SERVER hosting and I can not get money on the server I can not make/ender_man_killer 9999999 cause he said I have enough, BUT I'm the owner of pay

  No idea. All that I know is, I read there were some concerns of servers BUKKIT peacekeeping under the

  new regime. Can't imagine MS will prevent them, but...

  It is only a community forum. It is doubtful that anyone with responsibilities to the monopoly$ oft running Minecraft servers will see your message, so unless a member of the forum, which has been involved in Minecraft, and BUKKIT servers comes, you'd probably better on a forum dedicated to Minecraft.

  Or, maybe the bukkit below - forum

  http://bukkit.org/

  .

• Domain hosting with Adobe Muse CC and third parties

  Hello world

  If I register my domain name to a third party, then can I host my site with Adobe Muse (CC member), including my own domain name? Or do I have to host the site to a third party?

  Thank you

  Frenchfries

  Hello

  If you host your Business catalyst site, the system will generate 2 url for you, mydomain.businesscatalyst.com and mydomain.worldsecuresystems.com. As soon as you add your domain name, mydomain.com, mydomain.businesscatalyst.com will no longer be used. Please take a look at this article that could be useful

  http://helpx.Adobe.com/business-catalyst/using/change-site-Domain1.html

  I hope this helps.

• Question about my software Adobe creative cloud license

  Hello

  I'm Anne of Flex. I use a software for creating cloud licensed by Adobe for the past 2 years in my organization. I changed it recently my laptop and I tried to download and install the software to create cloud in my new laptop, but its just download the trial version. I don't get the solution for this.

  Thank you

  Anne.

  Hi Anne,.

  If the software displays as trial might be a problem connecting to the activation server. Please check: Advanced solutions to errors in connection with Adobe Creative Cloud and Creative Suite applications

  Good luck!

• I could leave Media Composer of Avid to Adobe first Pro CS6.   Here are some of the questions: 1. With Adobe first Pro CS6, would I be able to import images from my Canon G30 video camera WITHOUT transcoding?  2-. I would be able to pay and get the fo

  1-. With Adobe first Pro CS6, would I be able to import images from my Canon G30 video camera WITHOUT transcoding?  2-. I would be able to pay and get phone assistance from Adobe?  3-. I would be able to create DVD or disc Blu Ray in stereo or surround sound?   4-.  I have a collection of software from NewBlue.  He will work with the Prime Minister?  Thanks for the info.  Bert

  1. I don't know, but go to first import Formats html 0 http://help.adobe.com/en_US/premierepro/cs/using/WSd79b3ca3b623cac97fa024001235833a568-800

  2 - as far as I know, Adobe does not provide telephone support, only this forum

  3. you use the reminder grouped to create a DVD or BluRay http://forums.adobe.com/community/encore/content

  4 - If the plugin is specifically designed for PPro CS6, so ask the provider

• Question about Threads with WHILE and FOR

  Hi all
  
  I have a question on threads with a loop on this topic sentece.
  
  Have the following class:

  class test{
  
  bool foundThing;
  PararellSearch(string [] lista, string s2find){
  while(!foundThing)
  {
  for(int i=0;i<lista.length;i++){
  if(s2find==lista){
  
  foundThing = true;
  
  break;
  
  }
  
  }
  
  }
  
  }
  If I start 10 threads which are using the PararellSearch method to look into lista, each of them inits into a different point, and when some of them found the right word then set foundThing= true. It will stop WHILE and FOR loop in all the threads? 
  If not, how could I do it?
  
  Thanks a lot for your help.
  David.
  
  Edited by: user13553506 on 27-dic-2010 12:15
  
  Edited by: user13553506 on 27-dic-2010 15:54                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    
  			 
  When you post the code, you'll want to post a [url http://sscce.org] NBS so that it is clear that what you try to do it. For example:
  1. in the validation of code, put {code} before and after him, then he will be readable.
  2. the convention in Java must start with a capital letter class names, so test, could not test.
  3. the convention in Java is to start with lowercase letters, so parallelSearch, not PWhateverMisspellingYouHaveThere method names.
  4. There is no such thing as bool. It is a Boolean.
  5. it is a String, not string.
  6. never use == to compare the States of objects (such as the content of the strings). Use equals().
  To answer your question: If you create Test 10 objects, then, given that foundThing is an instance variable, there will be 10 variables entirely independent foundThing. An adjustment will not affect the other. In this case, the easiest thing to do would be to foundThing static, so that there is only one copy which is shared by the Test class as a whole. This isn't the only way, or even the best way in all cases, but you have enough other problems to face, so for now to keep things simple.
  Finally, when you have a variable that is shared by multiple threads, you need to either make all the access to this variable synchronized on the same lock (reads and writes), or you need to declare the volatile variable.
  		   

• 2 questions about V2V with Converter Standalone 4.3

  I have an s on esx 4.0 with some VM Windows production environment.  Esx 4.0 host are moving to a new location with scheduled within a few days.  To minimize the impact that I had planned to get up a VM host and V2V temp the VM, then when the original kit back in his new house them V2V.

  I just built a temp esxi 4.1 host and did a V2V test that went ok (ish). The main problem I encountered was that the static IP address is not used.  So my 1st question is: is it possible for a migrated VM keep its static ip address configuration?

  Secondly, will I encounter any issues V2V ing those VMS back to an old version of VMWare is i.e. esxi 4.1 = > esx 4.0?

  not upgarding vmware tools might work around this or it would be perhaps better to stand at another temp esx 4.0 Server?

  Thank you very much

  It works without any problem - there are no traps.

  If you are worried about it, clone a virtual machine and copy the files for the cloned VM, then run it on the new ESX as a test.

  You do not have a lot to focus on

• Questions about player with W xp und XP-Mode (2 people)

  Hi all

  I had to install an old programming (EP) in Windows XP Mode environment, because he made more runs on W7prof. In this installation the EP doesn't also run smooth as before on a computer with W xp (host). I would check now if the PE installed on xp W in a VMware Player work better. Before you begin this task on a computer with 64-bit W7prof, I have the following questions:

  1.) is it possible to install VMware Player on a computer where Windows XP Mode is already installed? (I would like to delete the XP-Mode only when I know that the short EP smooth on the VMware Player).

  (2) if the answer to 1.) is Yes: is there any significance if during the installation of the VMware Player Windows XP Mode is active (open) or not?

  3.), it is apparently possible to install xp on VMware Player W using the existing Windows XP Mode. Is this possible if Windows XP Mode is already installed?

  (4.) if the answer to 3.) is Yes: is there any significance if during the installation of xp W on the VMware Player Windows XP Mode is active (open) or not.

  5.) are there any other important aspects to consider, or y at - there somewhere a step by step instruction?

  Thanks in advance for your help.

  To the GATHERING

  If you want you run Windows XP Mode in VMware Player, then Windows Virtual PC and Windows XP stop nearby.  Then, you will need to install VMware Player and VMware vCenter Converter Standalone, installed with the selected (Advanced) Server installation option.  Then in VMware Player, select player > file > import Windows XP Mode VM... and follow through.  Once complete, you will have Windows XP Mode in the list under the House.

  NOTE: The Virtual Machine Windows XP Mode created in this way is a linked Clone and is linked to the file "Windows XP Mode base.vhd" and as such, you can not continue run Windows XP Mode Windows Virtual PC, unless you manually make a copy of the "Windows XP Mode base.vhd" file to another location and then change it properly the DescriptorFile disc shipped to change file 'Windows XP Mode.vmdk' 'parentFileNameHint =' option to point to the file copied manually "Windows XP Mode base.vhd" to its new location.  Note that this work around will not be permitted by the agreement to LICENSE Windows XP Mode, I have no read lately to see if it does not allow for what would be technically be two now also installed separate from Windows XP Mode.

  If you do not make a copy and edit properly the embedded disk DescriptorFile then once you decide whether or not you will not use VMware Player to run Windows XP Mode more then you can remove the Windows XP Mode virtual machine in VMware Player and continue to use it in Windows Virtual PC

• Question of localhost with Adobe Edge inspect on iPhone

  I synchronize multiple devices to use Adobe Edge inspect.

  I downloaded and installed:

  • Chrome extension.
  • Adobe Edge inspect on Android (on Samsung Galaxy Tablet)
  • Adobe Edge inspect on iPhone 4

  I use a 64-bit Windows OS.

  When I inspect sites online, the Tablet and iPhone synch.

  I have a local instance of Tomcat.

  I have a very simple index.html (Hello World in there).

  When I use in my localhost: 8080 to the chrome browser my Android tablet is synchronized

  The iPhone do not synchronize, and I get a timeout of the request.

  I also tried using the IP address instead of localhost with the same result.

  The iPhone is sync with the sites I have access that are hosted on the web.

  How can I get to synchronize using Tomcat so that I can use my localhost instance?

  Thank you

  It's quite strange. I think you should try to make sure the Windows Firewall and any other firewall or anti-virus software is disabled and try again see if you get a different result with your server local apache.

  Let us know if that helps. If this isn't the case, we'll see if we can get other ideas.

  Mark

• Question about area with a rug code * a DVD-RAM UJ - 841 S

  Hello!
  I have a Toshiba Satellite with a CARPET * a DVD-RAM UJ - 841S. Someone knows something about the firmware for this? I tried to use dvd43 and VideoLAN, but it does not work properly!

  I guess you do you want to Flash the firmware to remove the region code of the DVD player.
  Am I wrong?
  Don t do it! It risky s.
  If you update the drive with the wrong firmware or is not compatible the drive is not able to read/write to the media; CD and DVD.
  In addition, the use of the incorrect firmware will avoid the reorganization of the training by the BIOS.

• Question about WPA with lan card wireless in a Satellite Pro 6100

  Hello world

  I wish toshiba Australia had a cool site like this... It's fantastic.

  In any case, I just buy a kit (PA3189U-1MPC) wireless lan card for my laptop and network connection problems wireless of the University. The tech guy he says I need to have installed a wpa driver, and then I would be set for the use of bandwidth United.

  Anyone know where I can get a newish driver? I can't find anything anywhere...

  Thanks for any help,

  Jonno

  Hello

  First of all, it is very nice to read you like this forum. ;)

  So my friend from Australia, at first I must say that you use right and compatible WLAN card on your older laptop, but now I have to disappoint you. According to the specification, it is not possible to use WPA encryption with this card.

  Really, I don't think you can solve it with the new driver. I have newer computer Tecra laptop and I've tried everything but to no avail. Best solution for you is to use external USB WLAN stick. It will be much better for you. Initially, you can use WPA encryption and with the new card, you can use faster standard G and download speed will be much faster as with integrated WLAN card.

  Maybe you should think about it.

  Bye and good luck!

• Question about ASA5510 with AIP10

  I installed ASA5510-AIP10 with on our customer site. But I have 2 problems.

  First of all, I don't see no giga0/1(backplane interface) AIP10 traffic.

  Can I configure ASA5510 configuration? I already configured configuration associated AIP10 group virtual sensor and interface of remote sensing. Unfortunately, I can not all traffic.

  When I entered 'show int gi0/1' 10 AIP, it displays a number of the traffic count is zero.

  Secondly, AIP10 cannot do update of signature on automatic ftp server. When I inspected the package through tool Ethereal, disconnected AIP10 Server ftp after ftp 'LIST' command session is submitted to the ftp server. Maybe, I think that AIP10 didn't present 'Get sig.pkg' after her present "LIST".

  What should I do? Is - this hardware problem of the AIP? I would like to know about the above.

  Kind regards

  Get monitored traffic requires two configuration on the ASA and the SSM.

  It seems that you have completed the configuration of DFS.

  Now you need the corresponding configuration of ASA.

  http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/csids/csids11/cliguide/clissm.htm#wp1033926

  This is more easily by adding the lines of configuration "ips" in your policy map existing on the SAA itself.

  Once the ASA is configured, then the package counts on gig0/1 interface of the MSS should begin to increase.

  With regard to the problems of FTP server with automatic upgrade:

  The first thing to do is use the command 'upgrade' to the CLI to do a manual upgrade from the FTP server. This will ensure the name of user and password and directory settings are all correct for what you're trying.

  Once the manual works, then use the same settings for the automatic update.

  If the automatic update does not work, then check that this directory Unix style listing is used. The automatic update does not work when the style of the output of the Windows directory list is used. It is usually configurable on most Windows FTP servers.

  Also check out the "events to see the" while the sensor is to check the ftp server. The sensor will report on its findings. If he says that no updates have been found, check that you have a new update on the ftp server and ALSO make sure that the updated name is exactly as it appears on the ORC. Some users have inadvertently changed the name or the ftp client changed file names. The biggest problems we have seen is that capital letters are made lowercase.

• Question about images with Bootstrap galleries

  I watched the tutorial, I might add is very nice:

  Bootstrap Modal + Carousel Gallery - http://alt-web.com/

  And a number of questions:

  1. on the 'DEMO', there are 6 images. All images must be shown or may be just 1 image that when you click on the modal will load containing the remaining images?

  2. If you want to add more than 1 Gallery, do I need to recreate the full tutorial for each gallery? I have 5 different galleries.

  Thank you

  John

  jodmcc49 wrote:

  I watched the tutorial, I might add is very nice:

  Bootstrap Modal + Carousel Gallery - http://alt-web.com/

  Thank you to say, John.   I appreciate it.

  1. on the 'DEMO', there are 6 images. All images must be shown or may be just 1 image that when you click on the modal will load containing the remaining images?

  You can call the modal window to open a single image or a button, if that's what you want.

  jodmcc49 wrote:

  2. If you want to add more than 1 Gallery, do I need to recreate the full tutorial for each gallery? I have 5 different galleries.

  The way I structured this tutorial in particular, you should be 5 modal windows with a unique ID.

  • myModal1 - contains carousel1
  • myModal2 - contains carousel2
  • myModal3 - contains carousel3
  • etc...

  If you are good with AJAX/jQuery, you could call the Gallery carousel appropriate in a single Modal with GetElementByID instruction component.  But it's another tutorial.

  Nancy O.

• Question about backup with VDR 2.0.2

  Hello

  Excuse me for very low knowledge on this argument.

  I have a very simple question. If I made a backup of a motor home on Windows Server virtual machine and I create a folder on this machine between the time where VDR create the snapshot and the time of the end of the copy, when VDR remove the snapshot, the folder will remain on the server? All the changes I made on a virtual machine in the VDR copy will be lost or before to remove the snapshot, the changes will be merged with the original disc?

  Thank you very much.

  Hello

  the disks will be merged. If your changes are not lost.

  The backup however of course only will contain data up to the point when the snapshot was created.

  Concerning

  Tim