Upgrade memory PC 2 GB to 4 GB - problem with Indesign CS4

Similar Questions

• Upgrade memory of PC Compaq Presario SR2177CL Desktop problem

  I have a Compaq Presario SR2177CL desktop PC.  I checked the specifications of the product on the HP site and this is what it says for the record:

  Memory

   

  Attributes Installed memory 1 GB Maximum allowed 4 GB * (4 x 1 GB)
  * Actual available memory may be less

  Speed supported PC2-4200 MB/sec Type 240 pin DDR2 SDRAM

  I went to newegg and purchased:

  CORSAIR ValueSelect 2 GB (2 x 1 GB) 240-pin DDR2 SDRAM DDR2 533 (PC2 4200) Dual Channel Kit Desktop Me...

  When I put the pair of DIMMs in the pc, it won't post more.  The screen is still asleep and I never see the bios screen, I can't go in the bios configuration, or whatever it is.  As soon as I remove the pair, it works again.  The PC came with 2 512 MB DIMM in the slot 1 and 2, so I tried to delete those and replacing them with the pair I bought and got the same results.  I buy the bad memory?  I see it should work.

  Thanks in advance for any help and ideas.

  Chuck

  Finally!  I decided to try the suggested crucial.com memory, I went to the city and found in the store of the local computer.  It is plugged in and it works like a charm.  NewEgg gave me a credit on the memory of others when I called them, so everything worked.

• Upgrade memory for HP Pavilion g7-1070us laptop (problem)

  Well, I have a brand new HP Pavilion g7-1070us Notebook with 6Gig RAM and bought two sticks of memory 4 GB for a total of 8GB. Now that I swapped the sticks, my computer says that I only have memory usable 3.48Gigs. Keep in mind, it's 64 bit wondows. No 32-bit. Well, since I knew that it couldn't be the OS, I looked online and downloaded the new BIOS for my motherboard. There is nothing to solve the problem. My computer says I don't have 1 stick of RAM in, when I clearly have two. I can't find this problem anywhere else. I searched for hours. I looked in the BIOS config and ran a few tests of memory and whatnot, and they all confirm that I only have 4Gigs of RAM. This computer is new, so I have no idea what is wrong. I even picked up the RAM at the store and he exchanged with an identical kit, but nothing seems to work. I run a:

  : Computer HP Pavilion g7-1070

  Operating system: Windows Home Premium (64-bit)

  Hard drive: 680 Gig HARD drive

  Motherboard: Hewlett-Packard 184 b

  SM BIOS: F.17

  Memory: 3561MB<>

  Product #: B5Z45UAR #ABA

  Microprocessor: AMD A8 - 4500 APU with graphics Radeon (TM) HD

  The memory I have installed are two sticks of 1333 MHz memory PNY 4 GB SODIMM

  Any help would be appreciated

  AlecM wrote:

  .... I can't find this problem anywhere else. I searched for hours. I looked in the BIOS config and ran a few tests of memory and other whatnot and tHey all confirm that I have that 4Gigs of RAM. This computer is new, so I have no idea what is wrong. I even picked up the RAM at the store and he exchanged with an identical kit, but nothing seems to work.

  Hello

  I would like to physically check, reinstall and Exchange around when the machine can see that 1 piece.

  Kind regards.

• BlackBerry smartphones, upgrade one 8700 4.1... a problem with the Desktop Manager?

  I bought this phone as a gift (it has been used only for 3 days so it shouldn't me hardware failures) and am always adapt to it.

  The OS is v4.1.0.351, and I expect to give it a bit more use by updating the operating system. Unfortunately, whenever I try to update using a downloaded package and the Desktop Manager (or the line "update" that crosses the D.M., he tells me that my OS is most recent possible. I tried to update a number of times but without success. D.M. is not necessary for updates and does not give me an opportunity to use a downloaded package.

  My carrier is T-Mobile, but I am paid in advance (with a BlackBerry, I'm the 8th grader more cool on the block... too bad I'm 22) and the phone is unlocked to all carriers.

  Thank you very much!

  Hi and welcome to the Forums!

  You use this page to get the updated package?

  • http://www.t-mobile.com/bbupgrade/

  And also according to their complete instructions? If the lot you DL/install on your PC is identical to what is already installed on the BB, which would explain the results you get.

  I suspect that you do not use the package totally correctly is enhanced by the present:

  Psyluna wrote:

  D.M. is not necessary for updates and does not give me an opportunity to use a downloaded package.

  DTM does not such an offer... what you do is to install the package on your PC at the top of the DTM. Then, when you launch DTM, he will offer the update for your OS, but it does not technically she receives DL packaging or not I think. Can be semantic... but just to be clear.

  Finally:

  Psyluna wrote:

  My carrier is T-Mobile, but I am paid in advance (with a BlackBerry, I'm the 8th grader more cool on the block... too bad I'm 22) and the phone is unlocked to all carriers.

  Your specific model of BB is still supported by TM? If not, then they won't be offers a package to update (and all you DL would be on their part is not valid in any case - the package must match exactly to your BB model number... no deviation at all). What you have to do is to pick up the package you want from another carrier and then use these instructions to install:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...

  Good luck and let us know!

• Upgrade memory on Satellite M60

  Hello
  I recently installed Vista Ultimate on my computer Satellite M60 laptop, it is activated and updated, but I think it is out of memory. I have two 512 memory banks and bought two chips of memory of 1 GB crucial to install instead of 512 banks.
  It is, I can find a bank under a cover on the bottom of the laptop, but no others, abouts where is it not located and how do I enter?
  I did a similar upgrade on an older model and have no problem with the work on the machine, but in this case they were both below and easily accessible.

  Hope you can help.

  Russell.

  Hi Russell

  If the two slots of memory are not placed under the memory cover (lower side), one of them is usually placed under the keyboard. To access it, you must remove the plastic placed on the keyboard, and after that the keyboard itself.

• upgrade memory in a Portege 3410ct

  I tried installing memory of 128 MB PA3034u 3410ct, but on commissioning a message comes up saying that the ACPI BIOS is not fully compliant with the ACPI specification.
  I downloaded the latest BIOS setings but makes no difference. Will not start just yet. Clues as to correct the problem, other that not upgrading memory.

  Hello!

  This problem may occur if you add the memory (RAM) to the computer when it is in hibernation.

  When the computer comes out of hibernation mode and load the file Hiberfil.sys, Microsoft Windows detects the change in the State of the memory, and then you receive the error message.

  To resolve this issue, restart your computer.

  If the problem persists, start the computer by using an emergency boot disk, and then delete the Hiberfil.sys file.

  Good bye

• Upgrade memory for iMac 24-inch, early 2009

  I want to upgrade memory for my iMac 24 inch, early 2009 with 4 GB. What a memory of 8 GB will work Best Buy? I have a gift card I want to use.

  Thank you!

  Looks like you can get RAM for about half the cost at crucial.com

  You need 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM

• After the upgrade to Windows 8, problem with teredo tunneling adapter says code 10 error and the device cannot start

  Original title: teredo tunneling adapter error number 10 on windows 8

  on my acer travel mate 6292 which I just upgraded to windows 8 pro recently got a problem with teredo tunneling adapter.

  It says error code 10 and that the device cannot start, it made me unable to use wifi on my laptop

  I tried to reinstall the driver but it just says: windows encountered a problem installing and he says its error code 10

  Please help me

  Thanks in advance

  Hi Samuel,.

  We appreciate your efforts to solve this problem. We will put all our efforts in order to solve the problem.

  Teredo is a tunneling protocol designed to grant IPv6 connectivity to nodes that are located behind IPv6 NAT (network address translation) not compatible devices. It defines a way of encapsulating IPv6 packets in IPv4 UDP (User Datagram Protocol) datagrams can be routed through NAT devices, on the IPv4 internet.

  I wish to inform you that Acer has not released Windows 8 compatible drivers for Acer 6292 travel companion.

  I suggest you try to install the drivers for the card wireless in compatibility mode and check if it works. Check out the following link to download and install drivers in compatibility mode.

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  The link below to download the drivers for the wireless card: http://us.acer.com/ac/en/US/content/drivers

  A Code 10 error is generated in the Device Manager in one of the following situations:

  1. the Device Manager cannot start the device.

  2. one of the pilots who needs the unit does not start.

  3 device Manager has sufficient information to recognize the error that spread upwards by the device driver.

  We could try following common resolutions to solve the problem:

  1. update the drivers for this device

  2 launch a service of automated troubleshooting

  3 contact material supplier technical support

  For more information, please see the following article:

  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows

  http://support.Microsoft.com/kb/943104/en-us

  In addition, this article could also be designated:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-in/Windows/fix-network-adapter-problems#1TC=Windows-8

   

  Please answer us on the State of the question to help you further.

• Upgrade memory on an all in a single LX830

  I may upgrade the 4 GB provided to meet the requirements of the program. Additional memory needs to be installed in pairs? The existing 4 GB occupies a dwelling, can I mount 8 GB in another location or it will be incompatible?

  Well, mainly upgrade memory depends on the support of the chipset/CPU.

  Not quite sure what computer Toshiba LX830 do you have exactly but as far as I know the L830 all in one units would support up to 16 GB of RAM.

  A property used by a 4 GB RAM module and housing is free.
  This is why it must be able to use another additional module of 8 GB RAM.

  But of course, another module of 8 GB RAM should be compatible with the current 4 GB of RAM.
  Otherwise, you will get some compatibility issues

• Performance degrades in Probook s 4540 after upgrade memory

  Hello. I installed recently in my memory modules two Kingston Probook4540 (2x8gb ddr3 1600 CL10 240 pins). Since I did this, Windows 8 is much longer to start and performance dropped considerably. But, if I put only one of the two modules, or the original 4 GB module, Windows runs at normal speed.

  I think it's a BIOS problem, as I see this error even on laptops the other brand, for example here
  http://superuser.com/questions/379970/laptop-is-incredibly-slow-after-RAM-upgrade
  
  I have the latest BIOS version available (F31 26-SEP-2012).
  
  Thank you.

  In case anyone is still interested in this topic:

  It is a solution that worked for me.

  It is not an official solution or supported.

  I used the laptop intensively in the described configuration and had no problems that I can relate to the configuration of the memory.

  Deduct from a 256 MB RAM memory available for OS could eliminate the problem for some processors.

  The solution runs on:
  -HP 4540S

  -i5 - 2450M

  -AMD/Intel switchable graphics card

  -16 GB OF RAM

  -Bios F.42

  It might work for other processors.

  Under Windows, you should deduct 256 MB of RAM, using EasyBCD or a similar tool.

  Instructions for EasyBCD:

  Under Advanced settings/developer set 256 under "MiB deducted from physical memory", save the settings and reboot.

  In Linux, the "mem = 17G" value in the boot of the kernel settings (actually deducted 256 MB).

  Edit:

  On Windows 7 and later versions, you can also use the following instead of EasyBCD:

  bcdedit/set {current} removememory 256

  (Run the command at the prompt with administrator privileges and restart).

• Upgrade memory on NB300-108

  Looking to upgrade the RAM to 2 GB on my NB300-108

  Have you looked at the website of Toshiba and the cost, but there seems to be a plethora of alternative sites with upgrades memory compatible when I put in the part number.

  Would like to receive experiences in the forum about alternatives etc.

  Thank you

  Hello

  The laptop supports DDR2 800 MHz SO-DIMM or PC2-5300 (DDR2 667 Mhz) modules.
  These modules are provided by different companies.
  There are good quality modules and less quality modules

  Of course, you can choose and buy the cheapest, but in this case, you use the risk of compatibility problems.

  I made good experiences with RAM from Kingston. These are of good quality and not too expensive modules

• Upgrading memory on the NB550D - 11 d - 4 GB of RAM are possible

  To anyone who thinks of a memory upgrade on the NB550D:

  The NB550D supports up to 4 GB of memory, not only 2 GB as mentioned by Toshiba in their specifications.
  Upgrade memory to 2 GB is _only limited_ by the pre installed Windows 7 Starter OS, and not by the netbook itself.

  I use Linux Mint 11 Katya, 64-bit and my system works perfectly well with a 4 GB ram module. If you want to use the full support for 4 GB ram, get rid of the Win 7 Starter operating system.

  Specifications for more memory ram volume are DDR3 1333 MHz PC3-10600 SO-Dimm. I chose a 4 GB of Corsair module, because of the guarantee of 30 years of offers from Corsair.

  It took me a while to find this out hope, that this will be a help to all those who are just as secure as I was how to upgrade memory NB550D. Good luck. (o).

  Thanks for the comments

  Also it of important to mention than the 32-bit systems (not serious if its Linux or Windows) would recognize only 3.2 GB since it is a limitation of 32-bit
  So to use all of the 4 GB RAM 64-bit system is required.

• Question about upgrading memory Satellite M55-S1001

  can you please recommend what to do? I want to make my satellite m55-s1001 run faster please let me know, what do you recommend: 512 MB or 1 GB of memory? I'm not familiar with updates so please help!

  Hello

  First of all, if you want to go for fastest laptop, you should start with simple things.
  Try to defragment the disk, turn off the background process is not necessary, etc.
  Upgrade memory will the powerful laptop and of course a lot more quickly.

  To my knowledge the Satellite M55 should support the bars of memory 2 x 1024MB, and I also recommend the use of 1024MB instead of 512 MB module.

• I have iMac 5 k mid 2015 upgrading memory

  How to upgrade memory on iMac 5 k mid 2015 10.11.3 el capitan bones of 27 inches

  Installation video are visible by clicking on

  http://eShop.MacSales.com/installvideos/iMac-27-inch-5K-late-2015-memory/

• Satellite L50 - A - 1 5 PSKK6E does not start after upgrading memory

  Upgrade memory L50 - A - 1 5 pskk6e

  I have a memory ddr3 4 gb 1rx8 pc3 - 12800 S-11-12-b2 hynix and I tried to add another memory
  memory DDR3 4 gb 1rx8 hynix pc3 - 12800 S-11-11-b2, but it does not boot up the laptop.

  I tried to mount only the new but it won't start.

  Some ideas?

  I think that it s you already know that this Satellite L50 - has - 1 5 would support max 16 GB of RAM (2 x 8 GB)

  But why, box for computer laptop doesn t is very simple: the new modules are not compatible.

  I found modules recommended by Toshiba.
  These are:
  8GB DDR3L - 1600 PA5104U-1M8G
  4 GB DDR3L - 1600 PA5104U-1M4G

  Both are made of Kingston and the specifications are:

  Memory speed: 1600 Mhz PC3-12800
  Capacity: 8 GB (1x8GB module)
  Pins: 204 SODIMM
  Type of RAM: DDR3 SODIMM
  Verifying the integrity of data: non ECC
  Specifications:
  Latency (CL) CASES: 11
  Voltage: 1.35v