Question about buttons in indesign?

Similar Questions

• Satellite A660: Comment and a question about button lighting / mute

  Note:

  Hi, I'm the proud owner of a satellite A660-166 (3 days) and I installed everything from scratch on the win 7 pro because I got my laptop with a home (need pro for work) version... I met some problems, but this forum really answered my questions :) Never found such a useful for technical support forum. I wanted to express my gratitude and my support for everything you do for users :)

  Problem: well, this isn't really a problem, more a curiosity... I had a few problems with the key eco, at this time there button lighting / mute was to mute... Thank you guys, I found out what needed to be done, I reinstalled the Flash card software and everything worked properly more the lighting button / mute has been for enlightenment now. I have nothing against that, I prefer it like this, but I wonder how to change that... I found some response on the use of toshiba wireless Assistant and the illumination tab... Because my laptop is fairly new, that I do not have a tab of enlightenment, I was wondering how to change the mute button if I want to?

  Thanks, keep up the good work!

  It's nice to hear that you found answers to your questions here. Many people here trying to help.

  Back to your question: it is not easy to give a precise answer and I really put t know if you can change the settings of a single button. I think it has something to do with the registry entries, but how to change, that's another question.

  If you use this button for lighting ON / OFF, you can use FN + ESC for the mute button so you have two options that can be used with a touch or quick key combination.
  Can you please test and confirm that it works correctly?

• A really basic question about fonts in InDesign

  I'm new in the world of graphic design and teaching myself by trial and error and Lynda. One of my biggest problems in my project design is the selection of fonts. There are about 4 million, six hundred, two hundred twenty two thousand and seven policies .2 in the world and see that a 8 points of the just "Sample" version is not made for me.

  I'm reluctant to apply each police to turn my text to see what it looks like. When searching the Web, fonts displayed in the glory of the point 20, require at least a download, if it's not a transaction by credit card as well. Am I missing some obvious sign that facilitates the selection of fonts Manager. Perhaps a preference secret which could consolidate at least of fonts by family instead of alphbetically?

  Please help before go me blind. My eyes are starting to cross.

  Thank you! in advance for your Help.

  Oh Steve it is a better way to see the live type games, not black.

  Since InDesign Secrets.

  Select the text frame with the direct Selection tool, by clicking in the character Panel. Use the arrow keys Ko, high-low, to see the change of type of live.

  

• Question about Acrobat with InDesign CS4

  I'm about to spend PageMaker7 to InDesign CS4. InDesign CS4 has the same capabilities to create a PDF file from an InDesign file? I guess I asking that you get the Acrobat with InDesign software as you did with PageMaker? I think it was Acrobat version 5 which came with PageMaker? DRM for your help.

  PM has not the ability to create PDFs without Distiller. InDesign has a native ability to create very advanced PDF files much more easily and more reliably than Pagemaker ever could.

  As already reported off Acrobat is bundled with InDesign only as part of a suite and the PM not bundled with Acrobat, it comes only with Distiller.

  Bob

• Question about buttons

  Hey guys, I have a problem with the buttons, whenever I click on the button that I did in the ButtonField, the meau (display keyboard, switch Application, Full Meau) will be displayed, how do I get rid of this meau? (it won't appear whenever I click on it)

  Create your ButtonFields with the ButtonField.CONSUME_CLICK style bit.

• Question about lane change InDesign need help

  Hi experts,

  I want to find and reject the lane change, changeType.DELETED_TEXT., and reject it.

  How can I do that.

  How to make the script below work?

  Respect of

  John

  indesign #target

  myDocument var = app.documents.item (0);

  var myDocument.stories.item = monarticle (0);

  var myChange = myStory.changes.item (0);

  for (var i = changes.length - 1; i > = 0; i--) {}

  var myChangeTypes = myChange.changeTypes.DELETED_TEXT;

  myChange.reject ();

  }

  In your loop, you use 'changes', but which is not defined. But even if you had defined it, in the loop, you keep deleting the first change without checking its value, so in fact you reject all changes, even if they aren't deleted text. This code is what you want:

  var changes = app.documents.item(0).stories.item(0).changes;
  for (var i = changes.length-1; i >= 0; i--) {
    if (changes[i].changeType === ChangeTypes.DELETED_TEXT) {
      changes[i].reject();
    }
  }
  

  Peter

• Simple question about shortcuts in Indesign

  Anyone know a list of shortcuts to access the items in the control panel. For example, a shortcut to activate "Kerning" in the control panel and start to write a value...

  I am in ID CS 5.5 under Windows 7.

  Thank you in advance,

  Maria

  CTRL (CMD) 6 to get you up there - and then TAB to move

  You can adjust the kerning using ALT left arrow - and preferences can change the units and increments to make a more flexible adjustment

  ALT SHIFT arrows up and down to set the vertical offset

  High ALT down allows you to adjust the line spacing

• Question about InDesign...

  Question about InDesign...

  If I'm currently editing a text and the edge of the box is a line of "in dotted blue" means that the text is locked for editing? If yes how do I change the text? When I try to click inside the text, that it doesn't allow me to type in the text box.

  The dotted blue line indicates that the item is on a Master Page. You can edit in the master page, or shift + command + click (mac) to open it on the page of your document.

  Best practice is to avoid having things on master pages that will need to be unlocked.

• Questions about a relationship between InDesign and S1000D specification

  Hi I have a few questions about a relationship between InDesign and S1000D specification. First, InDesign does not meet an S1000D standard? If so, what questions are supported in InDesign as "S1000D issue 4.1'?." In addition, inflicts InDesign interconnected with CSDB through any creative or other module. I'm looking forward to get useful answers and thank you in advance.

  I agree with the screen name of Test in this regard. Technical publications represent only a small percentage of the market of InDesign. And it is likely that the authors of these publications InDesign may not have heard of the S1000D specification.

• A few questions about the making of the animated for a site Web Nav buttons

  Hello, I have a few questions about creating some animated for a NAV buttons.

  There are 2 actions I want to trigger on pouting above.

  If I want to use a static (PNG) image I created in Photoshop for the real button, can I use that? I want well drag the button down on the passage of the mouse and drag upward on the mouse. If I push the part of the "Web" button (sorry, that it comes from a Photoshop guy) it will disappear in the final animation? Another way to say this, if I put something lively off the coast of the white area, it no longer appears in the movie (.swf) when it is published?

  For the second part. You can see a bit of what I want to do if you look high Nav of the page of the website: http://www.photoshopsupport.com/index.html

  I need the 'light' above the button and it's going to be on another < div > color so I can't put a solid color of BG for my flash document. But I want to get the effect of the 'bar' lighting up above the button and the real key slide downwards to pouting on.

  You can provide any help would be greatly appreciated.

  We target the dynamicaly graph. Since the MouseEvent is now on the invisible sprite and not the graph itself, the one-for-all function has no reference to this graph. You can access the invisible sprite with event.target (or event.currentTarget), you can also target the chart because we declared "mygraphic" custom property to serve as a reference for the graphic. Thus, event.target.mygraphic is the benchmark for graphics.

  Of course, this is just an example. There are other variations of this trick.

  ____________________

  Design Cyboide

  Web site creation

• Questions about Satellite P10 554

  Hello

  I have 2 questions about my P10-554. I read on this forum but can't find anything that helps out me.

  First of all:
  When I try to turn the unit off after working, using even the closing of xp function or the power button, windows normally quit, but when it needs to turn off just reboot again. If I repeat the closing down directly after this restart, normally it turns off.
  This problem occur only when I use the power supply in battery mode.
  I can't say that to me...

  Second:
  I have a mini PCI Wlan card for my unit, works very well, but I wonder if it is possible to get the Wlan switch switch work whith it? Or is it only possible whith some special maps? It is not so important, but it would be nice to know if there is a trick or something to get the switch used.

  Best regards
  Gabbagandalf

  Hello

  Regarding your first question;
  I'm a bit confused of m are sure you n t use the restart option?
  I never noticed anything like that on my laptop

  Usually, if I use the Shut down option, I can choose between standby, hibernation, restart and shutdown. If I use the stop that the laptop turns off as it should.
  Maybe it's time to s for a reinstallation of the OS?

  On the second question.
  The switch on the left side for laptop was designed and developed to pass on the WLan card antenna.
  Usually, you should be able to use this switch and to toggle WLan card functionality

  Don t understand why it should not work?  :|

• Questions about an average of response spectrum and frequency of feeding mode.

  Hello

  I have a few questions about an average of mode. When I generate a sinusoidal signal from one output to two input channels channel to see if my DAQ card works well and vector averaged in the power spectrum for DFT, the amplitudes was different from the previous one of the amplitude, which was supposed to be 1 v peak. They range from 0.5 v to 0.6 v peak. When the calculation of the average model is RMS, the amplitudes were close to 1. I wonder what are the fomulas of RMS and average vector. Does that mean that I could not accurate if I use an average of vector? In a time of frequency response, why I coherences of difference and the amplitudes using the vector and the mean quadratic value?

  Thank you

  Ningyu

  rico1985,

  The differences in modes of generation are as they sound: 1 sample output only a sample writing, N samples will be released however many samples configure you for each entry, and the continuous samples released samples continuously until a specified user action happens (you press the stop button or a logic that you created gets fulfulled). The range of Signal output allows you to set a ceiling high and low level of your output signal and it only affects the quality keeping in this beach. Timing to set a deadline for the time between the acquisition of the sample. If a new sample becomes unavailable before the timeout setting, you will get an error. This is useful for looking at a network, because if the network goes down and you stop getting data from a machine and then you would like to know about it. I point you to those videos that are short tutorials on how to make the most of these actions in SignalExpress.The SignalExpress 3.0 Help file is also your first point of contact for all your questions on getting started. These two resources should get you up and running in SignalExpress in no time. (either by the way all your questions answered using these resources) Bravo!

• A few questions about the use of data and Cliq

  I have the cliq, however I chose to not get 3G (so I bought full fare). So I have a few questions about the phone and the use of 3G / 2 G/Edge:

  1 - is possible to disable completely the 2G / 3 G/Edge? I know you can switch between them, but are anyway just tell the phone to stop using them altogether since I'm not subbed to the service?

  2. when the update takes place, I guess we'll have to reconnect motoblur and etc, but if I don't have 3 G will I have motoblur connection problems after the update? Or he keeps the latest wifi settings so that it would connect to wifi to connect. When I first got my phone it was not a problem b/c I had 3G for the first month.

  I hope that makes sense, thanks!

  To stop all the data, I would like to download an application called APNDroid. He cut them all down. When you log on to blur you have 3G or WIFI doe this without getting a timeout error. During the process of setting up your Blur account, you can press the menu button and set up your wifi to work, this will connect you to Blur and your phone will be connected to the blur. If I were you I would be rethinking to do a data plan since you are really losing out on most of your main features of phones. It's your choice, however.

• Technical questions about X 1 carbon Touch base

  Please forgive me, I'm still recovering after the shock and frustration generated by dealing with Lenovo Tech Support.

  I recently received my X 1 carbon Touch and I have tried to understand some - I think - fundamental questions.

  As you know, to win 8, Lenovo doesn't have a custom recovery solution / owner. However, there are a score of Lenovo recovery on the machine. I'm /assuming/ this, somehow, can be used through the default / built-in mechanisms of recovery Windows, but I want to know exactly how without necessarily experiencing myself with it.

  In addition, the computer seems to be equipped with a mechanism of alternative stand-by, fast recovery called Intel or something like that. It is enabled in the BIOS and apparently makes use of a hidden partition of ~ 8 GB on the SSD. However, I find no indication of this mechanism working. There are no settings that I could find in Windows. I changed the BIOS to 'Immediately' setting in order to test the functionality, but put the computer to sleep does not seem to generate behavior that is somehow different from regular sleep.

  In any case, I would like advice or information on my questions above. I understand works the thing of recovery fast in order to decide if I want to recover the partition or not. I would also like to know my options I should never need re - install the delivered factory OS without actually crossed the steps. I would also if someone could tell me the best way to get support from Lenovo.

  / * I called Lenovo technical support with these issues. The person sponsor and those to whom I then was sent to had no idea what I was talking about. They had difficulty understanding terms like partition, standby, sleep, resume, and even software/hardware and implementation. It was suggested that my computer may be Intel and Lenovo not... They seemed to really come from an age of the computer. I asked to speak with someone who would have some basics of the machine that Lenovo delivered to me. I find it reasonable. At that time, I was told to talk to a knowledgeable person, I have to pay a fee. Seriously?

  */

  elfstone,

  To find out how to work the various Windows recovery methods, please see this Microsoft Web site:

  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  The sole purpose of the recovery partition is to work with the "All delete and reinstall Windows" function of Windows 8.  If you have specific questions about the factory recovery that you can't get items from Microsoft, let me know.

  Regarding the plan of hibernation from Intel, as you noted, it takes a partition dedicated to your SSD which cannot be used for other purposes.  The only parameter in Windows is inside the application of arrangements of Lenovo in the power section.  Lenovo calls this function "in waiting for 30 days.  The only thing you can do is it turn on or off.  Here's how works "waiting for 30 days:

  1. When you close the lid, or otherwise put the system into standby mode, the system of standby for 3 hours.

  03:02 hours, the system will wake up and check things like not attached AC, wake-on-LAN not activated, USB device not attached, etc..  If conditions permit, the system will enter wakefulness of 30 days for example deep sleep.  If the system returns in normal mode to 'sleep'.

  3. deep sleep means that the content of the memory is written on the special hibernation on the SSD partition.  It is very similar to the traditional hibernation except what happens faster using methods of BIOS instead of Windows methods.  But this isn't anywhere near as fast as normal sleep/recovery.

  4. the system out of deep sleep when the cover is opened or when you press the power button.

  You have found the BIOS settings, but in fact they are ignored when Lenovo settings (and package of dependence of the Lenovo parameters) are installed on the system.  I don't really know why this design choice has been made.

  Personally, I don't see value in 30 days standby, not enough value to want to give up my expensive SSD 8 GB.  I exclusively use sleep/recovery.  The battery will last several days.  And if I'm going to be away from the computer for a long time, then I'll just stop it.

• Question about ActionBar on the first screen of the application

  Hi, I have a question about the actionbar behavior in the first screen of the application

  index.htm pushes immediately main.htm with actionbar. ActionBar clicks and responds correctly until I have add overflow on some buttons.

  When I click on the button of overflow, the overflow is displayed at the bottom of the page, the top of the overflow is put in correspondence with the upper part of the actionbar so buttons actionbar overflowing content is not visible.

  I reproduce this problem with the sample application.

  This is expected behavior? Is there a way around it?

  I was able to reproduce the problem and have connected it

  https://github.com/BlackBerry/bbUI.js/issues/329