question about cfdocument when using a header

Similar Questions

• Question about cart Counter and position header J-26 of the widget in Muse conflict

  I recently purchased the award-winning J - 26 ecwid widget. I must say handguns are a beautiful set of enhancements and tools design for Muse. The conflict in question is the Cart counter Widget. I corresponded with the promoter to get this resolved and I was wondering if someone had this problem; As far as I know, this widget was designed to work with the store to trade Ecwid. (You must ask the developer if there are others) When the "Meter of Cart" widget is placed in the header of my page on a master page of cart or basket, I can't work properly. It could be something I'm not set up correctly or something else. But when the widget is placed under the header, it seems to work. The problem above the header area is that the counter disappears and does not make the connection with the store ecwid or something? I'm not sure. I am currently using a widget of J - 26 called a light cart followed the v2.3.1 and works very well in the position of the header. So all that being said, is there anyone who has tried the trolley counter in the header that works? Added note: I created a site skeleton with a connection to my storefront as a tester site, thinking that maybe there was a code problem. After bad and without success, I gave up. Currently, I'm looking for a work around to make a secondary master page for the storefront and to build a fake header move real heading to zero, so I can place the counter of trolley in the body of the page. Even with that there are a few problems.

  If anyone has had this same problem, please let me know, or better yet if you have a workaround or some instructions on how to make it work just in case it might be something I do not correctly.

  Again, the widgets are a great addition and I rent the developer for these. Any person who sets up an ecommerce site and wants to mark their page with many options, check on widgets. Well done.

  Ben

  Bravo for the professionalism of J - 26. After a repair my muse files, the developer of J - 26 set to update some of the widgets behave nicely with MUSE. Yet if you look at my first post here, award-winning J-26 ecwid widgets are well worth your efforts. Especially when developers are willing to look at the questions that pop up... and offer a solution! There are a few questions, I have about some of the settings, but all-in-all the characteristics fixed it are resolved.

  I give J - 26 an A +.

  Thank you

  Ben

• Question about the photo (using the folders and Photos app)

  Hello

  I am new on the app Photos - aperture used briefly but never really liked. I used to manage/sort all my photos with simple folders on the hard drive. Now, I would like to move the direction of the Photos app.

  A few questions:

  1.) if I add images, are they duplicated on my hard drive when I import them from Photos?

  2.) how to delete images permanently? I need to do a cleanup, which is easier in the Photos. If I delete the images here (and also delete the "recently deleted" album), why they remain in their original on my hard drive folder?

  Any help is appreciated - thanks!

  1 - Yes by default which is highly recommended, as was the case with iPhoto you then delete the photo source since it is safe in the library

  2 - pictures works just like iPhoto - nothing outside the library is not affected by what you do in the application - see 1

  LN

• Question about ESXi 5 use cases

  Hello

  My name is David Baldock, and one of the IT guys here at work suggested that with the help of VMware ESXi 5 could allows me to accomplish what I need to do on my system, without having to close and restart between Linux and Windows 7 for different tasks.

  I recently upgraded my PC to a processor Intel Core i7 - 3930K on a motherboard ASUS X 79 Sabertooth (VT - d support in BIOS) with 32 GB memory DDR3-2133 2 NIC and an AMD HD graphics 7970.  While I have not a card SCSI or SAS in there, I have a 256GB SSD OCZ Vertex - 4 2 x 120 GB OCZ Vertex 3 Max - SSD IOP, a 600 GB 10 K RPM Raptor H/D and a Blu - Ray SATA writer.  The SSD & H/D is on SATA 6 Gb/s ports, and the Blu - Ray is on a SATA 3 GB/s port.

  I normally run Linux on my PC, but the photo post-processing software that I use (DxO Optics Pro 7.5) works on Windows 7 and using OpenCL to take advantage of the computing power of 7970 HD.

  I understand that the VMware ESXi 5 installs as a hypervisor directly on the hardware and then allows multiple VMs to be run simultaneously on the system.

  Read on ESXi 5 (see courses and link below), I don't know if I should add a SCSI or SAS card, or if I can install and run VMware and OS on the SSD Client, using the large Raptor H/D to common storage?  There is a 2 to drive Iomega NAS connected to my network (and I have several external drives with SATA or USB-3 interfaces), with future plans to add in addition to stand-alone drives NAS or a big NAS RAID Array.

  The main question I have is if the material resources are dynamically reassignables between Virtual Machines?  For example, if I'm normally running Linux, then I would most of the CPU cores and the video card to "assign" to this virtual machine - but when I need to process the photos, I want to be able to boot Windows 7 and "reallocation" most of the hearts of processor and Passthrough the 7970 HD for this virtual machine to provide the computing power for the DxO Optics Pro.

  Is it possible to use VMware ESXi like that, or I'm better stop the PC and reboot between operating systems?

  Thanks for your ideas and suggestions.

  
  Take care
  David Baldock

  =====
  Quote from 'ESXi hardware requirements:

  For Serial ATA (SATA), a drive connected through taken SAS controllers supported or supported integrated SATA controllers. SATA drives will be considered remote, non-local. These discs will not serve as a partition to scrape by default because they are too far away.

  Note
  You cannot connect a SATA CD-ROM device on a virtual machine on a host ESXi 5.0. To use the SATA CD-ROM device, you must use the IDE emulation mode.

  Note
  ESXi does not support using SATA internal disks local to the host server to create VMFS stores of data that is shared between multiple ESXi hosts.

  =====
  Citation of "VMware Articles 10/05/11 06:51:
  VROOM! : GPGPU Computing in a VM

  Regularly on the forums I see people asking if GPGPU computing is supported by ESX, prompting me to write a brief message on the subject:

  YES! VMware ESX supports GPGPU computing. Applications can access the GPGPU CUDA or OpenCL in exactly in the same way that when running in native mode - no changes are necessary for the application.

  =====
  http://communities.VMware.com/community/VMTN/CTO/high-performance/blog/2011/11/21/SC11-virtualized-GPU-compute

  =====

  Install ESXi 5u1 on the system, then upward, setting it up as a host server. Then use another computer (Yes, you need to have another system actually configure/use the host) to configure passthrough and others. I don't know if it's available in the free version, so you don't have to try it and see. Be aware that you will be able to use the video adapter on a virtual machine single at some point.

  I just activate DirectPath of e/s on my own host (a nVidia Quadro NVS 290) video card. It requires a restart until it's available, however.

  So, if this works (for you too) enable you, reboot the host and then attach one of the virtual machine to the video card to use. You will then be able to use your other system to open a console window in this VM (from the Client vSphere connect directly on the host server) to do what you want / need.

• Question about the connection using the "sqlplus / as sysdba.

  Good afternoon
  
  The command:
  

  sqlplus / as sysdba

  worked very well for the Oracle server. When I go to a client, it does not work even if I specify the correct instance. On the client, I can able to connect using one of these two commands:
  

  sqlplus.exe sys/abc123@"orahost.john.local:1521/dbca.john.local" as sysdba
  
  or 
  
  sqlplus.exe sys/abc123@dbca as sysdba
  
  but not
  
  sqlplus / as sysdba
  
  or 
  
  sqlplus /@dbca as sysdba

  The question is: is the form "/ as sysdba" limited to used on the Oracle server and not available for customers?
  
  Thank you for your help,
  
  John.

  is the form "/ as sysdba" limited to use on the Oracle Server

  Yes

  and not available for customers?

  Yes

• Question about the possible use of MSVC 2008 Express as an external compiler CVI 9.0

  I was looking for these messages looking for information on the use of the ICB with external compilers, especially from MSVC 2008, and I came across this ad are about 4 months:

  "CVI 9.0 and MSVC 2008 express.

  The title of this announcement means that the freely downloadable 'express' version of MSVC can be used with CVI 9.0, but the body of the message is not in the details.  But I would really like to know if this is possible, and I'm guessing there are others here who could be very interested as well.  Page 8 of the CVI 9.0 release notes does not indicate that the Express version is supported, which makes sense.  I say this because I always thought that "express" versions of the MSVC were only to create .NET applications (C + c++ / CLI) and applications not native to Windows.  Or does change with the release of MSVC 2008 Express?

  There is no hurry to answer...

  JB

  If you have a CVI 9.0 FDS(I'm not sure about the BDS)

  Select Options/Build Options

  Select the Select button to the right of 'compiler active'.

  Click 'new' to create a new configuration of external compiler

  Select MSVC 9.0 as a model.

  Choose a configuration name (what you choose to CVI) and a destination file (where the external compiler settings will be stored).

  Click OK

  After that, you can easily select the optimizing level and the level of warnings that you need through the "Edit" in the box "compile to realease configuration.

  Kind regards

  Nicolas

• Question about the correct use of the WM_CONCAT

  Hello
  
  I am trying to accomplish the following:
  
  from this
  

       ENAME
       ----------
       ADAMS
       ALLEN
       BLAKE
  ...

  and ends on this
  

       OLD_NAME   NEW_NAME
       ---------- --------
       ADAMS      AADMS
       ALLEN      AELLN
       BLAKE      ABEKL
  ...

  Basically, alphabetically sort the characters within each name. I have an intermediate step that seems promising
  

  select e.ename oldname, substr(e.ename, iter.pos, 1) newcharpos
    from emp e,
         (select rownum pos from emp) iter
   where iter.pos <= length(e.ename)
   order by e.ename, substr(e.ename, iter.pos, 1);

  Yields above
  

  OLDNAME    NEWCHARPOS
  ---------- --------------------
  ADAMS      A
  ADAMS      A
  ADAMS      D
  ADAMS      M
  ADAMS      S
  ALLEN      A
  ALLEN      E
  ALLEN      L
  ALLEN      L
  ALLEN      N
  BLAKE      A
  BLAKE      B
  BLAKE      E
  BLAKE      K
  BLAKE      L
  ...

  the characters are in the right sequence, I thought that all I had to do was to use WM_CONCAT (and replace the comma it inserts with an empty string) and I would like to make. I thought it would do: (replacement of commas left out for clarity)
  

  select oldname,
         wm_concat(newcharpos) newname
    from (
          select e.ename oldname, substr(e.ename, iter.pos, 1) newcharpos
            from emp e,
                 (select rownum pos from emp) iter
           where iter.pos <= length(e.ename)
           order by e.ename, substr(e.ename, iter.pos, 1)
         )
    group by oldname;

  but the sequence of the newcharpos is messed up in the process and, rather than the expected result, I get this:
  

  OLDNAME    NEWNAME
  ---------- --------------------
  ADAMS      A,S,M,D,A
  ALLEN      A,N,L,L,E
  BLAKE      A,L,K,E,B
  ...

  My question is, how to structure the last query so that the order of character as calculated in the inner query stays?
  
  Thank you for your help,
  
  John.

  Or

  SQL> select   oldname,
         wm_concat(newcharpos) keep (dense_rank last order by null)  newname
    from (
          select e.ename oldname, substr(e.ename, iter.pos, 1) newcharpos
            from emp e,
                 (select rownum pos from emp) iter
           where iter.pos <= length(e.ename)
           order by e.ename, substr(e.ename, iter.pos, 1)
         )
    group by oldname
  /
  OLDNAME    NEWNAME
  ---------- ------------------------------
  ADAMS      A,A,D,M,S
  ALLEN      A,E,L,L,N
  BLAKE      A,B,E,K,L
  CLARK      A,C,K,L,R
  FORD       D,F,O,R
  JAMES      A,E,J,M,S
  JONES      E,J,N,O,S
  KING       G,I,K,N
  MARTIN     A,I,M,N,R,T
  MILLER     E,I,L,L,M,R
  SCOTT      C,O,S,T,T
  SMITH      H,I,M,S,T
  TURNER     E,N,R,R,T,U
  WARD       A,D,R,W                       
  
  14 rows selected.
  

  Or (11 GR 2)

  SQL> select ename oldname, column_value newname
    from emp,
         xmltable(('string-join(for $i in (' || rtrim(regexp_replace(ename, '(.)', '"\1",'),',') || ') order by $i return $i, "")'))
  /
  OLDNAME    NEWNAME
  ---------- ------------------------------
  SMITH      HIMST
  ALLEN      AELLN
  WARD       ADRW
  JONES      EJNOS
  MARTIN     AIMNRT
  BLAKE      ABEKL
  CLARK      ACKLR
  SCOTT      COSTT
  KING       GIKN
  TURNER     ENRRTU
  ADAMS      AADMS
  JAMES      AEJMS
  FORD       DFOR
  MILLER     EILLMR                        
  
  14 rows selected.
  

• Satellite L650 - 1 M 0 - Question about LED control using a writing software? in C++

  Hello

  Is it possible that a console program written in C controls the State of the led on the computer?
  I speak not here the LED keyboard, but the led corresponding to such a State of hard disk, power state.

  It's at all the possibility to 'take control' over these diodes? Or rather, it controls a separate computer system?

  Most of the care on the State of control module LED WiFi adapter. I replaced the network card, but my laptop is not the end of support. Start the computer, but you can't control adapter to function keys. When you disable the card in Device Manager, the light does not turn off.

  If I could create a program that will control the LED, if I could take a supplement (separate second program) for the function keys, which does not support the new card.
  Laptop is a Toshiba Satellite L650 1 M 0.

  I think that computer security is not strong because it is not protected from the BIOS. If it was, wouldn't at all. Only the lack of logic LED WiFi.
  By taking the scientific program caught can control the LED.

  Please be patient with me and write in plain English-the two shows (I'm a novice programmer C++ programming language) and English.
  I don't know English well, so I took the Google Translate. Sorry for my bad language...

  [b] compiler: [/ b] Microsoft Visual C ++ 2010 Express
  [b] software language: [/ b] C++
  [b] type emission: [/ b] console (maybe later I'll try Windows Form...?)
  [b] system: [/ b] Microsoft Windows 7 x 64

  I know that this forum is no longer on the problems associated with technical problems, but none of you can know what is "address" LED WiFi that is already associated with the knowledge of the equipment.

  Hi Krzysiolek

  I guess that no member of the community would be able to help you in this case very particular.
  I guess you should ask for a person with good knowledge of C++ programming.
  Here you can meet people and enthusiasts who talk technology, share their knowledge and trying to solve some common problems of the laptop.

  However, good luck

• Question about support export using predefined option 'Match Source - broadband'

  HI - looking for a few tips here:

  One of the first things I want to do after the shoot is to create a backup with all my usable images file (I'm shooting video air with the camera running all the time, so more most of my images is disposable). I would have thought that to preserve all the data/full resolution, etc. I should just export with option 'Match Source - broadband', but I am amazed as to how small the file size is proving to be. I shoot at 4K, so I'm expecting this option to export full 4K. But if I export 1080 p even this file ends up larger than the Source Match option. And compared to use export YouTube 4 K setting, the Option to Match Source is a fraction of the size. Then where all data goes? What will I lose? He applies a form of compression? And what is the best option to preserve the full resolution/data export?

  Thank you!

  Jacques

  I guess that 'source' = MP4 of origin off the camera files.

  "Source" in this case the resolution, frame rate, NOMINAL, etc..  It does not consider codecs and bitrates.

  What I want to do is made usable in MP4 pictures, as it comes off the camera without any loss.

  You can not.  H.264 is a codec.  If you want to keep the quality, you need a different codec, that which two I mentioned earlier.  If you're working in 4K, however, you are actually limited to UT as the only viable option for now, because the version of 4K of DNx is not yet implemented in the Adobe software.

• Question about the ports used by subdaemons

  We use a direct access, no client server, with TT 6.0.4. TT is installed with port 16200. We see the subdaemons using ports such as
  
  32814 timestensubd
  timestensubd 32818
  timestensubd 32820
  32822 timestensubd
  
  Is there anyway to configure which ports are in use? SE not in 6.0.4, and then in version 7.0.5 which we will use in the future?
  
  Thank you
  Linda

  I'm afraid that this isn't currently possible. There should be an improvement for this request.

  Chris

• Questions about multi-core use - Intel Core 2 Quad CPU - Q6600

  I have a virtual server running on my box of the hypervisor. I want to give him access to all four cores in my CPU. The processor is:

  Intel Core 2 Quad - #Q6600

  I'm runningUbuntu on this particular server. I did the following:

  cat/proc/cpuinfo

  I expect to see 4 separate the kernels listed, but this is what I see:

  =======

  Processor: 0

  vendor_id: GenuineIntel

  CPU family: 6

  model: 15

  model name: Intel(r) Core (TM) 2 Quad CPU Q6600 @ 2.40 GHz

  step by step: 11

  CPU MHz: 2405.970

  cache size: 4096 KB

  fdiv_bug: no

  hlt_bug: no

  f00f_bug: no

  coma_bug: no

  FPU: Yes

  fpu_exception: Yes

  CPUID level: 10

  WP: Yes

  flags: fpu vme pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss nx lm constant_tsc arch_perfmon pebs bts pni ssse3 cx16 lahf_lm up

  BogoMips: 4819.96

  clflush size: 64

  =======

  Although he lists on a single entry, is this set up correctly? If this is not the case, what should I do? Thank you for your help.

  You have already activated multiple vCPUs in comments settings? Which version of Ubuntu? Graphical user interface or command line?

• question about an image using a vector section

  OK, so I have a vector I want to apply an image to. So I abandoned the image in illustrator and make a clipping mask, but if I'm going to save it, or print it, he tries to print the space where the image is, even if it is only within the sketch to vector. Kind of confused with text, see photos, but I want to just cut out the image, vector and get rid of the rest of the image.  Is this possible in illustrator?

  btwice,

  You can read this thread:

  http://forums.Adobe.com/message/4766224#4766224

  And then there's the destructive Act, with the selected clipping mask:

  (1) in the transparency palette/Panel drop-down list choose anything but Normal (Multiply is fine);

  (2) object > flatten transparency, just keep the defaults including 100% vector.

  (3) thrill.

  And then there's the destructive action, without a clipping mask:

  (1) select the clipping path, make the filling/Nostroke and change its transparency > opacity to 0;

  (2) also to select the image and the object > flatten transparency, just keep the defaults including 100% Vector, object > ungroup and delete the unwanted; parts

  (3) thrill.

  Either must reduce the size of the Clipping Path bounding box.

• question about region when refreshing refreshment = "ifNeeded.

  in the definition of the region, "Refresh" is set to "ifNeeded.
  
  If the object instance is passed as a parameter to this region, changes to the attributes of this instance of the object will cause cooling in the region?
  
  for example, I defined a class Person. then I pass an instance of 'person' in the region, so I change the attribute of the age of this person object, automatically refresh in the region? but in my environment, seems region will be refreshed only after I have reassigned to another instance of person at the instance of 'person' that I spent.
  
  Thank you

  Hello

  change an attribute of an object that you pass as the value will not cause a refresh because the object does not change and so the value of the setting remains the same

  Frank

• An error occurred when DNS was questioned about the resource record (SRV) service location used to locate a domain controller Active Directory (AD DC) for the domain 'HAMI. LOCAL ".

  An error occurred when DNS was questioned about the resource record (SRV) service location used to locate a domain controller Active Directory (AD DC) for the domain 'HAMI. LOCAL ".

  The error was: "an existing connection was to be closed by the remote host".
  (0 x 00002746 WSAECONNRESET error code)

  The query was for the SRV record for _ldap._tcp.dc._msdcs. HAMI. LOCAL

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Forums TechNet Windows 7 Technet.

  Here is the link:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this helps

• A few questions about the use of data and Cliq

  I have the cliq, however I chose to not get 3G (so I bought full fare). So I have a few questions about the phone and the use of 3G / 2 G/Edge:

  1 - is possible to disable completely the 2G / 3 G/Edge? I know you can switch between them, but are anyway just tell the phone to stop using them altogether since I'm not subbed to the service?

  2. when the update takes place, I guess we'll have to reconnect motoblur and etc, but if I don't have 3 G will I have motoblur connection problems after the update? Or he keeps the latest wifi settings so that it would connect to wifi to connect. When I first got my phone it was not a problem b/c I had 3G for the first month.

  I hope that makes sense, thanks!

  To stop all the data, I would like to download an application called APNDroid. He cut them all down. When you log on to blur you have 3G or WIFI doe this without getting a timeout error. During the process of setting up your Blur account, you can press the menu button and set up your wifi to work, this will connect you to Blur and your phone will be connected to the blur. If I were you I would be rethinking to do a data plan since you are really losing out on most of your main features of phones. It's your choice, however.