Question about editing graphic images.

Similar Questions

• Question about the graphics driver

  Okay so just close a week ago my laptop (ASUS K55a) has decided to freeze on me while I look a a video on youtube (essentially what I normally do after obtaining of reception class at night). After that, however, I turn on my laptop after forcing him to stop and while the mouse was mobile, I couldn't click on anything whatsoever. Its as if it was running, it took, the incredibly long just at startup and when he did, loading everything and takes a lot of time.  (I rebooted once a couple and even started in safe mode, nothing seemed to work)

  So the next day I decide the best option here is to reformat because I really can't do anything else to my knowledge base. After reformatting all, it seems to work very well, but here's the problem: whenever I try to install the graphics driver updated on the computer I get this error:

  

  He had what appeared to be some kind of basic graphic driver, but after searching for the name of this driver, the solution was that this particular driver was related to corruption. (Also to try to get windows to update this basic driver, he would sit there for about 10 minutes then would proceed in a BSOD).

  -If I run dxdiag.exe it shows s/o under the view tab

  -Graphics Card allegedly inside: Intel HD Graphics 4000

  -J' tried installing the following but it says that my computer does not meet the minimum requirements:

  Intel® Graphics Media Accelerator Driver, Windows 7 * 64, Windows Vista * 64 (zip)

  Data sheet:

  If someone knows the question here please let me know if there is anything, I can do to solve this problem, thank you!

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
  
  
  WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.
  
  
  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.
  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.
  If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)
  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".
  The procedure:
  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
  * Zip up the copy (compress)
  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.
  Link to find out how to download below.
  http://www.WikiHow.com/use-SkyDrive
  To ensure the minidumps are enabled:
  * Click Start, in the search box, type: sysdm.cpl, press ENTER.
  * On the Advanced tab, click Startup and recovery... Settings button.
  * Make sure that automatically restart is unchecked.
  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
  * OK your way out.
  * Reboot if changes have been made.
  Please also run MSinfo32 and download the output as well.
  To run MSinfo32 please go to start > run > MSinfo32
  Go to 'file', 'save' and download the PDF is saved with the DMP
  System specs are extremely useful then please include everything you know.
  
  
  Blue screen view and that crashed are often wrong and should only be used in case of emergency...
  
  
  Troubleshooting of Windows/source here
  You can learn more about BSOD here
  You will learn how to test your memory ici
  An effective question gets help more quick read how here
  Pilot auditor-stalking a GIS behave driver here
  
  

• A few questions about the recovery image installation

  A recovery USB drive created using the Recovery Media Creator contains the Windows operating system and is it the Windows key to reinstall - how it is activated. Is it different for the repair disk.

  Can be used for a new installation of Windows 7 on a new SSD? Is this just a case of connection and the recovery disc running on the new drive to th? How the recovery Partition can be re-created on a new SSD?

  Drop Hello

  I can see user Justinian gave detailed answers, and I hope you understand how it all works now. Of my overwiev aside:

  What exactly is recovery image?
  + Recovery image is an exact copy of a hard drive and contains the exact copy, byte by byte, a hard disk partition. The copy includes all the partition information, sectors priming, the table of allocation of files, installation of operating system and software application different. +
  + You are using installation Recovery CD/DVD/USB, you can restore your system after heavy data loss, caused by an accident of operating system, hardware failure or complete virus attack. +
  + Recovery image installation procedure allows the installation of system and easy to user. Unfortunately, it is not possible to restore only certain files from a disk image. +
  + Each recovery image is designed for a specific model laptop and it cannot be used for any other series of notebook. +

  With other words, recovery image is a software package that contains Windows operating system, all the drivers needed for some portable model, Toshiba tools, utilities, and also some other software. A lot of people don't like these additional software, but no you don't have to use it. all things you don't like you can remove it from the system.

  Activation of recovery image:
  When you buy the phone model you also purchase the license for the preinstalled OS version that you get with your machine. After start and contact to the internet OS will be checked and activation will be valid.

  Please note: you can reinstall original image recovery 100 times if necessary. There is not a kind of limitation, and whenever it will be activated.

  Take care of your recovery media (DVD/USB). Do not lose it.

  Of course, it can happen that you do not find your recovery media. In this case you can order.
  Recovery order - https://backupmedia.toshiba.eu/landing.aspx
  Questions and answers about ordering recovery DVDs - http://aps2.toshiba-tro.de/kb0/TSB0202TA0000R01.htm

  If you have any other questions do not hesitate to ask.

• two questions about the scattered images secure

  I created an image that is secure and encrypted for sensitive documents.

  I have two questions:

  1. when I use the disk (if it is up, open and available), and I want to add something to it, I usually drag the file everywhere where it is currently in its destination folder in the sparse image control.  But it automatically makes a copy - with the same name (not with a '-1' ever, not with a suffix 'copying' or 'alias').  Which defeats the purpose and makes things complicated - I find myself comparing what is in each location to make sure it's in the sparse image and then it makes me nervous to delete the original.  Why it does this and how can I change such as dragging a file in a secure location gives there is not that a second copy of it left in an UNsecure location?

  2. I'm using Time Machine backup drive sitting on my desk (and a separate utility for monthly clones on a different backup disk).  Automatically makes Time Machine backup the content of the rare picture even if the safe drive is not mounted, open and available?  I hope not, because that would undermine the usefulness of having a backup disk on my desktop running of ordinary Time Machine backups, but find it me just that all the steps I take of course I do not lose any data may be so overprotective I have thought/hoped.

  Sous_forme_d' addendum, I'll check my clone, but as I put this out there, I wonder if SuperDuper!, my application of cloning is cloning automatically secure disk content, so... like the thoughts of anyone about it if it's an application that they use).

  FYI: I'm running 10.11.2

  Thank you.

  (1) by default, OS X makes a copy with the overcoming of the limits of volume and moves when in the same volume.

  You can reverse this behavior by holding down the command key when you drop. You will see the insignia of the icon changes (green + for copy, empty for move).

  (2) Time Machine will return to the top of the image 'file', but only when it is unmounted. I do not think that it automatically includes the volume mounted, but I would like to check and add to the exclusion list.

• Question about editing a Dreamweaver template

  I used a #2 model of http://www.Adobe.com/devnet/Dreamweaver/articles/dreamweaver_custom_templates.html

  and have blurred by editing it and went 'ok' according to my criteria.

  Pending a question I have is how to something 'UNDER' my left navigation bar.

  If you look at my site http://mpalitigation.com/index.html you will see a waaaay button from paypal to the bottom on the left side, I was hoping

  to put this button under the links for navigation but not just with them.  I tried to do a crash course on the float, clear, etc... but

  the best I could do was clear after the navigation bar left float but then the content in the middle is pushed down under the end of the navigation bar.

  Any help would be appreciated.

  The CSS code is

  .leftnavigation {
      width: 192px;
      margin: 70px 0px 0px 0px;
      padding-left: 8px;
      float: left;
      list-style-type: none;
  }
  
  .leftnavigation a{
      margin-left: 0px;
      width: 156px;
      padding-left: 15px;
      padding-top: 5px;
      padding-right: 20px;
      padding-bottom: 5px;
      float: left;
      color: #364957;
      font-size: 10px;
      font-weight: bold;
      font-family: Verdana, Arial, Helvetica, sans-serif;
      text-decoration: none;
      background-image: url(images/nav_normal.jpg);
      background-repeat: repeat-x;
      background-position: 0px 0px;
      border-bottom: 1px solid #999;
  }
  
  .leftnavigation a:visited{
      color: #364957;
  }
  .leftnavigation a:hover{
      color: #ffffff;
      background-image: url(images/nav_down.jpg);
  }
  

  The page you linked is not a child of a DW model page.

  In any case, if I remove your PayPal form from its current location and place it like this (note the inline style), it seems to work OK.

  • HOME
  • SUBPOENAS
  • QUOTE
  • INVESTIGATIVE SERVICES
  • CUSTOMER LOGIN
  • CONTACT US

  method https://www.paypal.com/cgi-bin/webscr"="post"style =" width: 180px; " margin: 15px 0 15px 0; » >

  https://www.paypalobjects.com/en_US/i/BTN/btn_paynowCC_LG.gif' border = '0' name = "submit" alt = "PayPal - the safer, easier way to pay online how!" >

  https://www.paypalobjects.com/en_US/i/SCR/pixel.gif"width ="1"height ="1">

  Note that I also wrapped the combination of navigation and the form in a div container

• A few questions about Toshiba recovery image

  Hello
  I'M ALPER. I HAVE A PROBLEM EVEN WITH OTHER FRIENDS. THE PROBLEM IS THAT I INSTALLED WINDOWS 7 PRO TO MY COMPUTER, I COULD NOT GO BACK TO THE ORIGINAL OS.

  I HAVE HDDRECOVERY IN MY HARD DRIVE. BUT I HAVE NO RECOVERY DISK.

  I TRY THE METHOD BY FOLLOWING THE LINK. IT DOES NOT WORK. WINDOWS DIRECTLY WHEN THE COMPUTER STARTS. NO RECOVERY.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=68031

  NOW, I'LL TRY IT THE HARD WAY. IF I WANT SUCCESS I'LL YOU SAY.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=40790

  BEFORE DOING THAT I HAVE A QUESTION IF I CREATE TOSHIBA RESTORE DISK WITH THE SAME MODEL MY FRIENDS? IS IT WORKING OR NOT?

  ANOTHER QUESTION: IS THERE ANOTHER WAY?

  Thank you

  > I HAVE A SAME PROBLEM WITH OTHER FRIENDS
  That s best evidence of something interesting that we write here: person read document s user manuals.

  In this section of the forum you will find many discussions with very good explanation of how it works. In any case, here is brief summary:

  Each laptop model comes with preinstalled OS (factory settings). HARD drive (from the HARD drive partition) recovery facility can be launched and work if the laptop to factory settings. Otherwise you will have access to files from recovery, and there is also no possibility to start the installation of HARD drive recovery.
  > BEFORE I HAVE A QUESTION IF I CREATE TOSHIBA RESTORE DISK WITH THE SAME MODEL OF MY FRIENDS?
  In general Yes, but this other model must have the same part number. Send your model name and we can tell you this part number.

  In any case, in my opinion the best solution for you is order the original Toshiba Recovery disk and use it for recovery image installation.

• Equium A100-147: Question about upgrade graphic

  I am about to open my A100 to deposit into a new Core 2 Duo, but what I also want to know, is this model has the ability to take a graphics card.
  Also the toshiba offer this model with a better GPU than the GMA950 graphics?

  There is no buy for the game, but I could update if possible.

  Please do not post here to tell me that this model is not for games I am very aware of this fact already.

  Thanks in advance to anyone who can help you.

  Lee

  I presume you didn't search in this forum some similar thread on the graph and the replacement of the CPU. Am I wrong?

  I would recommend doing this because then you will find useful information on the graphics card upgrade and finally a statement the GPU upgrade is not possible.

  In addition, you will find a lot of discussions and advice that it s not recommended to disassemble the laptop and to upgrade the processor

  Concerning

• Equium M70: Question about upgrade graphics card

  Is it possible to upgrade this machine (below spec) for best graphics preformance? Read past postings left me little hope. All the advice sensible word be very appreciated. Thank you, Scott

  Operating system: Windows XP Home Edition (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.050301 - 1519)
  Language: English (regional setting: English)
  System manufacturer: TOSHIBA
  System model: SATELLITE M70
  BIOS: Ver 1.00PARTTBL
  : Processor Intel (r) Pentium (r) M 1.73GHz
  Memory: 502 MB of RAM
  Page file: 456MB used, 772 MB of available space
  Windows Dir: C:\WINDOWS
  DirectX version: DirectX 9 .0c (4.09.0000.0904)
  DX setup parameters: not found
  DxDiag Version: 5.03.2600.2180 32 bit Unicode

  ------------
  DxDiag Notes
  ------------
  The DirectX files tab: no problems found.
  Display 1 tab: No problems found.
  Sound tab 1: No problems found.
  Music tab: no problems found.
  Input tab: no problems found.
  The network tab: no problems found.

  --------------------
  DirectX Debug levels
  --------------------
  Direct3D: 0/4 (n/a)
  DirectDraw: 0/4 (detail)
  DirectInput: 0/5 (n/a)
  DirectMusic: 0/5 (n/a)
  DirectPlay: 0/9 (detail)
  DirectSound: 0/5 (retail)
  DirectShow: 0/6 (detail)

  ---------------
  Display devices
  ---------------
  Name of the card: Mobile Intel (r) 915GM/GMS, 910GML Express Chipset Family
  Manufacturer: Intel Corporation
  Chip type: Intel(r) 915GM/GMS, 910GML Express Chipset
  DAC type: internal
  The device key: Enum\PCI\VEN_8086 & DEV_2592 & SUBSYS_FF041179 & REV_03
  Display memory: 128.0 MB
  Current mode: 1280 x 800 (32 bit) (60 Hz)
  Monitor: Plug-and-Play monitor
  Monitor Max Res: 1600,1200
  Driver name: ialmrnt5.dll
  Driver version: 6.14.0010.4497 (English)
  The DDI Version: 9 (or higher)
  Driver attributes: Final retail
  Format/driver Date: 07/02/2006 08:56:16, 45697 bytes
  Would be WHQL logo: Yes
  WHQL Date stamp: n/a
  VDD: n/a
  Mini VDD: ialmnt5.sys
  Mini VDD Date: 07/02/2006 09:04:34, 1399615 bytes
  The instrument identifier: {D7B78E66-66D2-11CF-5863-0EDFA2C2CB35}
  Vendor ID: 0 x 8086
  Device ID: 0 x 2592
  SubSys ID: 0xFF041179
  Revision ID: 0 x 0003
  Revision ID: 0 x 0003
  Video Accel:
  Deinterlace caps: n/a
  Registry: OK
  DDraw status: enabled
  D3D status: enabled
  AGP status: Not available
  DDraw Test result: does not work
  D3D7 Test result: does not work
  D3D8 Test result: does not work
  D3d9 Test result: does not work

  I have the Satellite Pro M70. Update graphics on laptops is not generally possible. Perhaps CPU but graphics card. I really put t believe.

  Can you imagine what happen inside the laptop if the Exchange was possible?

• Question about certified graphics cards

  My company is thinking about purchasing new workstations Dell that include graphics cards NVIDIA® GeForce® GTX 650 . I do not see this listed as a card cards certified for AE, but see cards similar as the GTX 670, listed. AE will work with the GTX 650, or it is possible to work with the GTX 650? Thanks for any help on this issue.

  The GPU is used for very little in After Effects. There is a feature that who relies on it, but it is not used much in most workflows (3d renderer traced to the RADIUS) as it's been replaced by the inclusion of Cinema 4 d Lite. Learn more about the GPU in AE here. There are a few third-party plugins that use the GPU (Knoll Light Factory, 3-d element, etc.), but their demands are different from the white list of AE.

• Simple question about editing waveform in multitrack

  I have an hour of music interspersed with talk about the scene.  I put this file in multitrack view, and then I tried to apply a different filter, (equilizer) to music and conversation.  I cut the track at each stage of the conversation of the music. Then I started in the beginning and each block right click and click on modify waveform.  This takes you to the view of the unique path and I applied the filter.  I painstakingly did all the blocks a filter for audio and one for music. Then I save the recorded session which recorded and mixed to another track and who.  The only problem is when I listen to it it sounds exactly like the original.  There seems to be no difference between them.  I feel when you change the waveform of multitrack view, edit you it, but that's all he never goes anywhere.  I thought that when I did it was just take this block and put it in editing mode and then when I went back to multitrack there everything went.  But apparently not.  What should I do to change a block in multitrack and can you do this?  Doug

  Mounting in the sense that you're talking about doesn't happen in multitrack view at all - it is non-destructive. In other words, it plays your file selectively, with effects that you have added to the point where this particular instance of reading is. And that's all it does - it does not any real change in the file at all. And no matter what. If you want to apply different effects to different parts of your single track, you must either use the automation system - in which it is perfectly possible, but it will be somewhat limit your ability to move the blocks around - or do what most people do, which is, change the view to restructure your file into segments and finally save as different files. Then you import these new files in multitrack view, and you can treat them separately. That way you can easily put all files dialog on a track that you EQ in a sense and any music on the other. Then you reglissez tracks all about give you your original performance (or a better version with deviations less!). Mix the result down, and you're done.

  If you want to make a reality, permanent changes to a file, then you have to do these in the edit mode. When you return to this file in MV then changes will be there - but keep in mind they will change every single instance of it, which is, of course, why it is best to import each segment in a separate file - any changes made to the it does not affect other selections you could carry out other parts of him elsewhere.

  There are other ways that you can make the entire process as well - it's just a first and the most obvious.

• Question about the graphics card of the Satellite P50t-B-108

  Hello

  I think to buy the Toshiba Satellite P50t-B-108 model.
  Can you tell me if this phone has some kind of graphic hibrid (he uses both the graphic processor Embedded Intel and AMD one?) or simply the radeon graphics processor?

  I need to install a linux distribution (I might go with ubuntu, but it's not important) and what I need to know is if the HDMI works...

  Thank you.

  Hello

  As far as I know the Satellite P50t-B-108 was equipped with the graphics card AMD Radeon R9 M265X.
  In addition the Intel® Core i7-4700HQ processor supports the Intel HD Graphics 4600
  This Intel HD 4600 graphics unit is part of the Intel CPU.

• Question about the graphics card of Satellite P30 144

  Hello
  I have a Satellite P30-144 and I need to know if the graphics card is integrated to the motherboard or is separated.
  I play a lot of games online and you need to know if I need to go out and buy a new one, cause my graphics card does not work on the new moh airborne

  Ty for your help

  Colin

  Hi friend

  Sorry I have to tell you that it s not possible to update your computer with a new graphics from the vga chip is embedded on the motherboard.

  Almost ALL of the toshiba machines were "wired" so graphics card if you don t one machine of 30,000 dollars for weld and a LOT of know-how for reprogramming BIOS as the guys at toshiba @ Japan then take your thoughts on the upgrade of the VGA.

  If I were you I would upgrade my RAM instead or if you really want to play games with your machine then you can order this thing:

  http://tech.Yahoo.com/CES/null/11883

  Welcome them

• Questions about upgrading graphics card, P7-1235

  I bought the P7-1235, who owns the AMD Radeon HD graphics card 7560. I read it as an integrated card, but I could add or update? The power supply is 300 Watts I think. Anyone know if I can do an update without changing the power supply? Is this useful? In addition to surfing the web and watching videos from You Tube, I have Sims games. I would like to start playing more casual games, nothing heavy.

  Here are the specifications of your desktop HP Pavilion p7-1235. You are right in saying the the HD 7560 is integrated as part of the CPU.

  Almost any card PCIe x 16 graphic detail that is more powerful than the existing HD 7560 will require the upgrade of electrical power to 400 watts to 600 watts unit. Exist it HD7560 must manage the Sims without problem, You Tube and surf the web. It should also handle most games 'casual' as well but shall be moved if you throw something hardcore. Operate the system as it is and if it works for you... well, if it's not... time for a new card and power supply.

• Question about editing "to go to the previous slide.

  Is there a way to go back to less drag 2 slides not one which is less than what 'go to previous slide do? '

  Create a tip action as shown in the image:

  

• Tips for Lightroom 6 help indicates again that if "using a graphics card AMD/ATI under Windows 64-bit with the AMD Catalyst driver 15.7 and Lightroom CC/Lightroom 6 hangs or crashes during launch or when you edit an image in the develop module.»  This

  Oops... .the everything in the title... My apologies!

  Tips for Lightroom 6 help indicates again that if "using a graphics card AMD/ATI under Windows 64-bit with the AMD Catalyst driver 15.7 and Lightroom CC/Lightroom 6 hangs or crashes during launch or when you edit an image in the develop module.»  This problem may occur when you use AMD Radeon HD 5xxx card graphics series 8xxx running versions of pilot 14.501.1003, 14.502.1014 and 15.200.1062.1004. For the Solution of the page install the AMD Catalyst 15.8 Beta Driver for Windows (posted August 31, 2015).  However, there are now a 16.1 driver... would this work with Lightroom 6buttons Photpshop CC without problem or should I stay with 15.8 beta for Windows driver (Windows 8.1.

  Thank you very much

  Paul Winstone

  Hi Paul,.

  This article was created when users have faced problem with old drivers for AMD graphics card.

  Yes, you can upgrade to the last 16.1 pilots and who should work well however, you should have 1 GB VRAM or more to take advantage of the GPU processors.

  Kind regards

  Claes