Question about editing "to go to the previous slide.

Is there a way to go back to less drag 2 slides not one which is less than what 'go to previous slide do? '

Create a tip action as shown in the image:

Tags: Adobe Captivate

Similar Questions

Question about reversal of pin of the PXI-6562

I have a PXI-6562 card with cable which is the note.

Note If you create a customized with connector wiring solution (779157 - 01) and cable (192744-01), the NI 656 x pinout is reversed at the level of the end fitting. For example, the signal on pin 1 on the previous figure would map to pin 73 at the level of the end fitting.

Pin 1 go back to pin 73, but what about the pairs?

Pin 2 return to 71 or 72?

1 - 73

2 - 72

.....

73 - 1

All pin codes signals add up to 74

Questions about reinstalling Windows XP after the end of Support

Several members of the family of my friends that I sometimes provide technical assistance for are still under XP SP3 on their systems. These systems are too outdated and underpowered to upgrade to a newer version of Windows, and it will probably be some time until they are able to upgrade to a more recent hardware capable of running most modern versions of Windows.

If in the meantime, something happens to one of their computers requiring a reinstall of Windows after support for XP purposes, but before they can get a newer computer, I have a few questions about what will happen:
1. Is there still a way to activate their existing copies of XP during installation process?
2. While I understand that new patches, updates, patches & will be is no longer provided, existing patches will be available through the Microsoft Update service so that I would be able to get those computers to update state that they would be about to XP supported ends, or do I have to search elsewhere to try & find these updates? (It would be nice if Microsoft put up a cumulative update that would be sort of a mega-patch for people in this situation to be able to get back to the most current state systems, but I would not be surprised if there wasn't such a thing).
Anyone know the answers to these questions?

Thank you

You should be able to clean install and activate Windows XP. You should be able to upgrade as well, even if the wise move would be to get the updates stored on portable media or integrated into a multimedia installation (or both) as soon as POSSIBLE if the plan is to continue using Windows XP for a while.

My suggestion is to set up and to buy Windows 7 Professional renovated systems / lease from places like TigerDirect.com - as pricing is generally about the same as just a license for Windows 7 or a little professional, the hardware specifications of these machines are likely machines Windows XP current in use, using something like the PC Mover take care of Laplink and Microsoft to move files (or for the more than 25 USD the) applications that can be moved as well) to the new system of the former is possible, and Windows 7 will get updated until 2020.

Recently research I've seen systems to Windows 7 Professional for as little as 150 USD with 4 GB of memory and dual core processors. Not bad.

Questions about close cache events and the defeat strategy "ALL".
I use near cache, and try to determine what defeat strategy would be better for me. My cards before being highly volatile, I'm considering strongly using the strategy of "EVERYTHING" for at least some of my caches.

This brings me some questions about the event cache stream closely when the strategy using ALL:

(1) should I expect an event to be published from the back cover when an element is added? (i.e. putAll() called cache before)
(2) should I expect an event to be published from the back cover when an item is deleted? (i.e. remove() called cache before)
(3) should I expect an event to be published from the back cover when an element is expelled from the rear because of size constraints?
(4) should I expect an event to appear from the back cover when an element is expelled from the rear due to the expiry?
Hi Tom,

near cache before cards do not store the entries inserted in the back cover, so if you have saved a listener on the front plane, you will get the notification to the listener on the plan before all the inserts in the back cover of other nodes.

It's a little different for entries that have been asked by the local node through the near cache (not directly on the distributed back cache). If the cache almost didn't get call so far, then they will not go into the front plane, so it's the same as if inserted directly into the back cover. It is the starting of the near cache behavior. After the first EEG puts will be cached in the front plane. Once that puts is cached in the front plane, then the listener before card will see put through the cache close to the same node, but not of other nodes.

Also, the cache near registers a listener lite, so it becomes not the input values changed, as the keys.

A listener that you entered on the back cover will see each insertion, if you do not save a MapEventFilter or a MapEventTransformer custom with the listener. A MapEventFilter can filter inserts away (I think, the cache similar to that, too).

Best regards

Robert

Question about AP Autoinvoice and macthing the invoice?
"Hi Forum - I have a question about accounts payable" * pay on reception Autoinvoice * "program.

The question: Does autoinvoice program match invoices against PO, or do I need this to do it manually after running this program?

Thanks in advance!
Hello

You have not need manually match invoices to the BP.

The standard functionality of the remuneration to the receive function is as mentioned below:

You can set up your vendors to pay upon receipt or delivery, and you can choose the level of consolidation of bills: paid site of landslide, a reception or packaging provider.

After receipt or delivery operations are created, you can submit reception AutoInvoice compensation program to automatically import the invoices corresponding to the corresponding purchase orders.

When the Payables open Interface import process is complete, you can then validate and pay these bills to order using the processing of payments of accounts payable standard feature.

I hope this helps.

Thanks and greetings
Jeanny.

General question about a message displayed on the top of the fillets.
Hi all
I get a message at the top of my thread as follows
```
         This question is not answered. HelpFul answers 5, correct answer1.

 
```
What does that mean? It means that the partners to my question, the forum contains 5 useful and 1 right answer? If Yes... then how to reach the correct answer?

Help is requested emergency because my question is maybe failed instead of the issue as already correctly answered, maybe.

THANKS A BUNDLE.
jk_apex_newby wrote:
Hi all
I get a message at the top of my thread as follows
```
This question is not answered. HelpFul answers 5, correct answer1.
```
What does that mean? It means that the partners to my question, the forum contains 5 useful and 1 right answer? If Yes... then how to reach the correct answer?
(a) this means that you have not checked your question as answered
(b) for each question, as the author of the question, are you able to assign points to those who give you answers. For this you can, if you choose, Mark 1 reply "correct" and up to 5 answers such as "useful". A correct answer will assign that person 10 points and a useful answer that person will award 5 points. The points more a person gets more status increases for example they stop being a 'Newbie' to become a 'guru '.

It is up to you as the author of the question if award you points or not, if it is considered good etiquette if you do, assuming of course you received an answer correct or helpful to your question.

You mark answers as correct/useful numbers in the message above will change to show you how much more you can assign.

Note: once you mark a correct answer or useful, you can not remove it again or move to another answer if a more useful or correct response is given later. So does mark messages for love of him, or because someone suggested, you must mark it as useful or appropriate; Mark them only when you have solved your question or someone has been really helpful.

Automatic return to the previous slide

Hello
It's probably very basic and I just never had to do so patient with the question. I have a 'menu' slide in which the user can click on one of several areas of click to go to another slide. Once they are on the new slide, I would come back automatically to the menu slide without the user clicking on something. This can be done? I use CP4.
Thanks in advance for your help. You are great!
Gary

On the properties of the slide, search where you can specify the action on Exit. Set it to go to the slide, and then select your menu drag in the drop-down list.

This means that when the slide ends play it will automatically switch to the menu slide.

Deleting slides brings the previous slide text to next
I just installed 2 Captivate.

When I delete a slide, it takes the text of "notes" on the first slide and place it in the slide after that I deleted. I looked around to see if there is a feature that I can turn off, but I don't see anything. Is this a bug in Captivate 2?
Hi tlmossman

I don't think this is a bug with version 2 and you should report it as such in here.

However, by playing with this I think I discovered a pretty easy solution for you.

Immediately after the removal of the slide, type Ctrl + Z to perform a step to cancel it. This should restore the notes for the slide follows that has been deleted.

Hope this helps... Rick

Question about cardinality (lines) to explain the plan

I have two tables (names have been changed to protect the innocent):

TABLE 1:

The Null columns?    Type
-------------------- -------- ----------------------------------------------
Table1_Primary_Key NOT NULL NUMBER
more than 10 columns

TABLE2:

The Null columns?    Type
-------------------- -------- ----------------------------------------------
Table2_Primary_Key NOT NULL NUMBER
more than 8 columns

Lines of table1 has 1097172

Rows of table2 has 160960

I am analysis request and get explain below:

SELECT t1. Table1_Primary_Key
--
FROM TABLE1 t1,
From TABLE2 T2
--
WHERE t1. Table1_Primary_Key = t1. Table1_Primary_Key
AND t2. Table2_Primary_Key = 3432798
/

------------------------------------------------------------------------------------------------
| ID | Operation | Name | Lines | Bytes | Cost (% CPU). Time |
------------------------------------------------------------------------------------------------
|   0 | SELECT STATEMENT |                 |     1.    21.     5 (0) | 00:00:01 |
|   1. NESTED LOOPS |                 |     1.    21.     5 (0) | 00:00:01 |
|   2.   TABLE ACCESS BY INDEX ROWID | TABLE2.     1.    12.     3 (0) | 00:00:01 |
|* 3 |    INDEX UNIQUE SCAN | TABLE2_PK |     1.       |     2 (0) | 00:00:01 |
|   4.   TABLE ACCESS BY INDEX ROWID | TABLE1. 1096K | 9634K |     2 (0) | 00:00:01 |
|* 5 |    INDEX UNIQUE SCAN | TABLE1_PK |     1.       |     1 (0) | 00:00:01 |
------------------------------------------------------------------------------------------------

As you can see it table2 is exactly 1 row and join table1 on a correspondence of single line.

My question is this:

Why the plan of the explain command seems (at least for me) to indicate that it looked like all the rows in TABLE1?

Thank you

Thomas

the optimizer's decisions are based on the object (and maybe system) statistics: so it's a good idea to provide as much information as possible in these statistics. Basically, there is nothing wrong with statistics automatic collection job - so I would count on that if I don't have very good reason to use anything else. Of course, there are some situations in which it's a good idea to add a few adjustions for automatic collection: sometimes, there is too much created histograms, sometimes there is too little (basically you have histograms when the distribution of the data is not yet). And if there are columns with correlated values who serve together in boundary conditions then create extensive statistics may be a good idea. To make these adjustions, you can use the routines of pref dbms_stats. And sometimes, it may even be a good idea is not to collect statistics for an object and use the sample dynamic (dynamic statistics) for more detailed information on the cardinality of distribution and join.

In the book of my opinion Jonathan Lewis cost base Oracle Fundamentals still contains the best explanation of the use of optimizer statistics - and Christian Antognini Oracle performance troubleshooting also provides a lot of valuable information about statistics and their gathering. Of course the documentation also explains the basics in detail: Managing optimizer statistics - 11 g Release 2 (11.2). And if you want to get a shorter summary, then you can always take a look at the Web of Tim Hall site: https://oracle-base.com/articles/misc/cost-based-optimizer-and-database-statistics.

Questions about adding a NAS to the existing environment

Hello
We have an existing deployment of VI with an EMC SAN and three ESX host. We would like to add additional storage to NAS and storage ISO tests. To do this, we were going to set up a RHEL 5 server, as others on the forum have done and use NFS to provide a data store for ESX. However, I have some questions that I found only partial answers on the forum.
(1) is there a performance by adding NAS on the network of IP storage for the existing deployment of VI? Our EMC SAN uses iSCSI to provide a storage boxes currently. Mix iSCSI and NFS on the IP storage networking a bad idea to turn performance and stability? Anyone done this? Looks like a logical thing to do that many small deployments may not afford to buy company for test/development equipment and storage ISO.
(2) what are the security implications of placing an NFS server on Red Hat-based IP storage network? How to do this safely? All posts of forum and documentation of security seem to focus on the need to separate the traffic of IP storage (which is clear text) to run virtual machines or physical servers. In order to add the NAS on the network of storage, we allow access to the Red Hat server for IP storage network.
(3) is there a way to limit the traffic on the network interface facing the storage over IP to NFS network only? We would be two interfaces on the server Red Hat to fight against it, as our network of IP storage is not returned to the other networks in some way. It is an isolated network by design, for security reasons. Thus, we would need an interface connected to the stroage and one IP network that is connected to one of our management systems.
Thank you. I appreciate your help.
James

Hello

I can understand a problem of pure load. What I meant is there at - it a greater load on the servers simply having to use two different storage (NFS and iSCSI) protocols? Or is it better to use iSCSI on the storage of test/development device so that we only configuring and using a storage Protocol?

There is some overhead in the vmkernel, but it is also to be expected.

I think that it is at the heart of the case. I don't use a full OS is the way to go for me. I'm really a Windows administrator and my knowledge of Red Hat is somewhat lacking. On this basis, it may be preferable to use a storage OS like Openfiler or NexentaStor. Do you have an opinion on which one is more stable or efficient?

Openfiler is Linux or FreeBSD. I still have to examine in detail, but in both cases, they are both complete BONES. Openfiler is much easier to use, however, and will be iSCSI or NFS. If it were me, and I didn't know anything about Linux, I'd use Openfiler.

VMs allows access to the storage indirectly however ESX.

Great, so he can participate in your existing IP storage network. Configure web access (management) to Openfiler being on the same network as for existing SAN management application. Then have your data on the IP storage network.

Best regards

Edward L. Haletky

VMware communities user moderator

====

Author of the book "VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.»

Blue gears and SearchVMware Pro Articles: http://www.astroarch.com/wiki/index.php/Blog_Roll

Security Virtualization top of page links: http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links

Question about editing a Dreamweaver template

I used a #2 model of http://www.Adobe.com/devnet/Dreamweaver/articles/dreamweaver_custom_templates.html
and have blurred by editing it and went 'ok' according to my criteria.
Pending a question I have is how to something 'UNDER' my left navigation bar.
If you look at my site http://mpalitigation.com/index.html you will see a waaaay button from paypal to the bottom on the left side, I was hoping
to put this button under the links for navigation but not just with them. I tried to do a crash course on the float, clear, etc... but
the best I could do was clear after the navigation bar left float but then the content in the middle is pushed down under the end of the navigation bar.
Any help would be appreciated.
The CSS code is
```
.leftnavigation {
    width: 192px;
    margin: 70px 0px 0px 0px;
    padding-left: 8px;
    float: left;
    list-style-type: none;
}

.leftnavigation a{
    margin-left: 0px;
    width: 156px;
    padding-left: 15px;
    padding-top: 5px;
    padding-right: 20px;
    padding-bottom: 5px;
    float: left;
    color: #364957;
    font-size: 10px;
    font-weight: bold;
    font-family: Verdana, Arial, Helvetica, sans-serif;
    text-decoration: none;
    background-image: url(images/nav_normal.jpg);
    background-repeat: repeat-x;
    background-position: 0px 0px;
    border-bottom: 1px solid #999;
}

.leftnavigation a:visited{
    color: #364957;
}
.leftnavigation a:hover{
    color: #ffffff;
    background-image: url(images/nav_down.jpg);
}
```
The page you linked is not a child of a DW model page.

In any case, if I remove your PayPal form from its current location and place it like this (note the inline style), it seems to work OK.
method https://www.paypal.com/cgi-bin/webscr"="post"style =" width: 180px; " margin: 15px 0 15px 0; » >

https://www.paypalobjects.com/en_US/i/BTN/btn_paynowCC_LG.gif' border = '0' name = "submit" alt = "PayPal - the safer, easier way to pay online how!" >

https://www.paypalobjects.com/en_US/i/SCR/pixel.gif"width ="1"height ="1">
Note that I also wrapped the combination of navigation and the form in a div container

Simple question about editing waveform in multitrack

I have an hour of music interspersed with talk about the scene. I put this file in multitrack view, and then I tried to apply a different filter, (equilizer) to music and conversation. I cut the track at each stage of the conversation of the music. Then I started in the beginning and each block right click and click on modify waveform. This takes you to the view of the unique path and I applied the filter. I painstakingly did all the blocks a filter for audio and one for music. Then I save the recorded session which recorded and mixed to another track and who. The only problem is when I listen to it it sounds exactly like the original. There seems to be no difference between them. I feel when you change the waveform of multitrack view, edit you it, but that's all he never goes anywhere. I thought that when I did it was just take this block and put it in editing mode and then when I went back to multitrack there everything went. But apparently not. What should I do to change a block in multitrack and can you do this? Doug

Mounting in the sense that you're talking about doesn't happen in multitrack view at all - it is non-destructive. In other words, it plays your file selectively, with effects that you have added to the point where this particular instance of reading is. And that's all it does - it does not any real change in the file at all. And no matter what. If you want to apply different effects to different parts of your single track, you must either use the automation system - in which it is perfectly possible, but it will be somewhat limit your ability to move the blocks around - or do what most people do, which is, change the view to restructure your file into segments and finally save as different files. Then you import these new files in multitrack view, and you can treat them separately. That way you can easily put all files dialog on a track that you EQ in a sense and any music on the other. Then you reglissez tracks all about give you your original performance (or a better version with deviations less!). Mix the result down, and you're done.

If you want to make a reality, permanent changes to a file, then you have to do these in the edit mode. When you return to this file in MV then changes will be there - but keep in mind they will change every single instance of it, which is, of course, why it is best to import each segment in a separate file - any changes made to the it does not affect other selections you could carry out other parts of him elsewhere.

There are other ways that you can make the entire process as well - it's just a first and the most obvious.

Satellite A100 - Questions about slow start, not in the DMA mode CD drivers

Hi all

as you can see I have 3 questions:

1. my Satellite A100-153 starts very slowly (current running avira antivir and sunbelt pfw only like on my other laptop which is older than this one, but not slow start)-anyone has any idea why (I would be very gratefull because I don't have reinstall win and all my stuff)?

2 Nero tells me that my CD is not running in DMA mode - where can I check and fix this?

3. drivers - am I forced the drivers supported on this site or can I use the drivers directly from the manufacturer (ATI for my graphics card, Intel for my chipset realtek for my sound and so on)?

Help is welcome!

Hello

For me, it will be interesting to know what operating system you are using. Anyway, I'll try to give my short opinion on your questions:

-many other factors may be responsible for slow start. It is usually the OS configuration. I'll try to find an interesting article, how to make faster starting and I will post it here for you.

--entrer enter in the device IDE ATA/ATAPI controllers Manager, enter the properties for secondary IDE chanel and open the Advanced Settings tab. Is under transfer mode DMA if available? If this isn't the case, set it to please and after reboot check if the problem persists. DMA if available is usually defined as a default value.

-In general, you can use it but it is well known that manufacturers of graphics card don't support mobile graphics cards and laptop manufacturers are responsible for.

I recommend you to use the Toshiba drivers only. All of these drivers are put to the test.

Good bye

Question about product ID records and the screen

Hi, I play a lot of yahoo pool and we must use the record screen programs to ensure that we do not cheat in most leagues here. One proposed condition is that we show our information in our records system. I ask here to learn more about the potential dangers. I noticed that in one sample screenshot, the ID of the product shows. That's my biggest concern. Can you confirm/deny it would be dangerous to put out this info to anyone?

Hi SeaDogsFan,

Never share your number to identify product with a person who is not a legitimate representative of Microsoft.

Software piracy comes in different forms, some more known than others. Each type of piracy is unique and often requires unique protection methods.

Counterfeiting is a common form of piracy. Others include loading hard drive, Internet piracy and casual copying or softlifting. Casual copying is the sharing of software between people in a way that infringes on the Software EULA. An example of casual copying is if someone were to get a copy of Microsoft Office XP and load it on his PC, share it with another person who took on his PC, then share it with a third person who charged on his PC and so on. This form of piracy is widespread and represents a large part of the economic losses due to piracy. It is this form of piracy, casual copying, that Microsoft is mainly intended to reduce with Product Activation.

Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

Kind regards

KarthiK TP

Question about hamid 3325 - anyone know the value of RegexString?

While trying to answer the question "what caused this fire signature?" regarding hamid 3325, I decided to use the signature tuning utility to try to understand.

Unfortunately, other than knowing that this signature using the "TCP. Engine for the STRING' and it appears for ports 139 and 445, I do not know what exactly in the payload was originally signed to the fire.

Does anyone have the exact value of the RegexString for hamid 3325?

Thank you

MCpl Alex Arndt

ID of engineering

WING

The current regex is:

\xFF\x53\x4D\x42\x32.*\x00\x01.*\x08\x01

This will change in the update of signature S53 pending tests more.

Question about editing "to go to the previous slide.

Similar Questions

Maybe you are looking for