Question about Excel AddIn and the UDA in Excel

Similar Questions

• Protégé M200: Question about Vista TPM and the Bitlocker

  You want to know if I have a TPM chip to launch bitblocker on the M200 using Vista. Just call Toshiba Technical Support - the guy was totally distraught!

  If I don't have a TPM chip, then I can install it?

  Hello

  It is a good question. To my knowledge the Portege M200 does not support TPM but the Portege M400, R400 module and the R200

  But the Bitlocker, which is only available on the Vista Enterprise and ultimate can also be used without the TPM chip but then some functions are not available; for example, the SecureBoot.
  Without TPM only the OS volume encryption is available.
  In this case you can encrypts the entire Windows volume including both data and file system user, the file of hibernation, the page file and the temporary files.

  Using volume of BONE (HDD) encryption an encryption key will be generated. This key will be written to the USB and then the USB is required!

  AFAIK the Bitlocker requires 2 partitions. A partition must be created as needs at least 50 MB primary partition. I recommend a? about 1.5 GB
  The second big partition Vista can be installed.

  After the installation of Vista the Bitlocker must be enabled in Group Policy (units without secure TPM). This can be done using the command 'gpedit '.
  And then under models of administration-> windows components-> Bitlocker bitlocker function can be activated!

  Anyway, there is much information Bitlocker and I think you should also consult the Microsoft Web site for more information:
  BitLocker Windows Drive Encryption step-by-step guide

  I hope I could help a little

• Satellite C660-1F1 - Question about newer drivers and the speed of the memory

  Some of the drivers for this laptop are outdated compared to the most recent drivers on peripheral manufacters website. Is it safe to use these new drivers or is it recommended to stick with the old drivers that are on the Toshiba site?

  And second question: is it possible to make the fastest possible working memory supported? Don t BIOS options include options for the parameters of memory. Why the memory is running as low mhz in case of default? CPU - Z shows that the current frequency of dram is 532, 2 mhz. What is the maximum, it is at 667 mhz? Probably she can´t be 1 066 MHz as promised in the specs?

  Hi cryogenized,.

  > Some of the drivers for this laptop are outdated compared to the most recent drivers on peripheral manufacters website. Is it safe to use these new drivers or is it recommended to stick with the old drivers that are on the Toshiba site?
  Why you want to update your drivers? Do you expect a gain of performance with newer drivers?

  Way General, with official Toshiba drivers you are on the safe side because they are pre-tested. If you can make sure that they work properly and don t cause property damage. Install the other drivers happens on your own risk!

  > And second question: is it possible to make the fastest possible working memory supported? Don t BIOS options include options for the parameters of memory. Why the memory is running as low mhz in case of default? CPU - Z shows that the current frequency of dram is 532, 2 mhz. What is the maximum, it is at 667 mhz? Probably she can´t be 1 066 MHz as promised in the specs?
  The laptop is equipped with modules of DDR3 1066 MHz and the RAM speed is dependent on the FSB of the processor. If your CPU is throttling down, RAM modules will work also on low speed. On a high utilization of the processor (100%) the RAM modules must run with speed of 1066 MHz I think.

• question about sending mail and the use of UrlEncodedPostData

  Hello

  I need to send over https three things:

  (1) framework, which is a byte [] object, and has some information about the device and the things that need to be sent to the server

  object String 2) imei - imei of the device.

  (3) data - some data, which are a String object

  now I need to use URlEncodedPostData, but...

  UrlEncodedPostData _post = new UrlEncodedPostData(null, false);
  
  _post.append("frame", ???)-> my frame is a byte[] object
  

  so, what should I do? should I change channel frame? but, later when I send the _post to the server that I use:

  _httpConnection.openDataOutputStream(_post.getBytes());
  

  YH, the problem is-how to put a byte [] object to the urlEncodedPostData and then send it?

  The point of encoding is to ensure that special characters can be detected correctly.  There is no URL address, as the settings.

  You will notice that the class that you are trying to use is called URLEncodedPostData.  I don't know if the same URL encoding is used in BOTH and given POST, but I think this class should be used in the data of PUBLICATION, rather than to GET data (look at the name).  You will find that the process of encoding data GET is not so difficult and I don't know if you look you will find J2ME coding code on the Web, that will help you create correctly to GET URL format.

  However, I still think you should consider the difference between GET and POST, and what data is passed by each type of application.  I think that if you had done that earlier, you wouldn't be in this position, you understand better my answers and you will understand how to create the queries POST you have to best use later.  GET and POST are NOT Blackberry or specific RIM, they are the Web specifications and used on all platforms.  There is a lot of documentation out there.

• Buy new computer Windows 7 Professional and have questions about other files, and the removals of document on the old computer

  Hi all!

  I need help.    I just bought a new computer that has Windows 7 on it.     This old computer is 7 years old

  and last year I had put win 7 professional about it.     I'm trying to delete files on it.    How can I do this correctly.

  What I need to remove the Windows 7 Professional out of it since I bought it and have the license and the disc.    Or, do

  to keep the disc and just remove it from this computer.     What happens if someone else wants the computer I leave it on and

  Give them the disc.   How can I handle this?     I am new to this?    Someone just set up my new computer and I want to

  to make sure that I have all my passwords and other things out of that right.

  CAN SOMEONE HELP ME SOON!    A.S.A.P.!    Cause I need to work for the new space.

  Thank you.    Sharon

  If you delete all partitions found (when booting from the cd of win) it will only destroy what is on the hard drive of the PC (all data can be saved), he won't do anything to victory dvd

  If your new PC shipped with win7 preinstalled you need not really your origonal dvd win7. -You can sell or keep

  If you do not want to give the old PC, then simply remove the hard drive (how can be found on google) and destroy the hard drive with a heavy hammer

  (A seven year old PC is practically worthless)

• Formula of contour and the UDA load in Essbase by ODI

  Hi all
  
  Oracle table column maps to the size designation and UDA target Essbase formula and UDA respectively in ODI 11.1.1.6
  
  Interface has also run successfully.
  
  but noted in the Regional service console that shows the Member who doesn't have a formula "! FORMULA ERROR NOT LOADED! ». Same case with the UDA.
  
  Can you please how to handle this in the ODI format and the UDA in ODI.
  
  Thank you
  Alex keny

  You would load UDA and formulas all the same that the other columns, if there is an error with the formula generates usually outline the comment of the error.

  It of probably worth to look to the operator steps and view the SQL code generated before being transmitted to essbase, you can then execute the SQL and verify if it is correct.

  Please note that you will need to manually delete the comment of the error in the outline as even if the formula is loaded correctly the next time, this does not alter the comment.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• I have a Photosmart C7280 and s question about a decision of the network.

  I currently have two workstations connected to a router via ethernet cables.  They are connected to a single (not HP) printer with USB cable through a USB switch.  Two laptops to connect to the wireless router.  I could replicate the existing configuration with the C7280, but the idea of a network in which the laptops were allowed to participate is very attractive.  One of the laptop is running Windows version 7, the other computers running Linux.  If I go for an ethernet network, the laptops will be able to connect to the printer via the router?  If I go for a wireless network, desktop computers will be able to connect to the printer via their ethernet cables?  A couple of Wireless USB adapters are a possibility.

  I understand that you have questions about networking with your printer.

  Yes, wired network connections will be no problem to connect to a wifi connected printer.  Most routers bridge cable and wireless to work as a single network.  There are some routers between wired and wireless networks, but these are before any company grade routers and network equipment.

  A wired desktop computer will be able to print to a wireless printer as long as it is connected via the same router.  Conversely, a wireless computer can print to a printer connected Ethernet as long as it's the same router.

  I recommend using a network for the printer configuration, if possible, to avoid printing problems.  USB hubs have been known to cause printing problems, although this isn't always the case.

• Question about AP Autoinvoice and macthing the invoice?

  "Hi Forum - I have a question about accounts payable" * pay on reception Autoinvoice * "program.
  
  The question: Does autoinvoice program match invoices against PO, or do I need this to do it manually after running this program?
  
  
  Thanks in advance!

  Hello

  You have not need manually match invoices to the BP.

  The standard functionality of the remuneration to the receive function is as mentioned below:

  You can set up your vendors to pay upon receipt or delivery, and you can choose the level of consolidation of bills: paid site of landslide, a reception or packaging provider.

  After receipt or delivery operations are created, you can submit reception AutoInvoice compensation program to automatically import the invoices corresponding to the corresponding purchase orders.

  When the Payables open Interface import process is complete, you can then validate and pay these bills to order using the processing of payments of accounts payable standard feature.

  I hope this helps.

  Thanks and greetings
  Jeanny.

• Question about full scan of the Table and Tablespaces

  Good evening (or morning).
  
  I read the Concepts of Oracle (I am new to Oracle) and it seems that, based on the way in which Oracle allocates and manages the storage of the local the following is true:
  
  Principle: A table which is often accessible by using a full table scan (for some reason any) would be better resident in its own dedicated tablespace.
  
  The main reason I came to this conclusion is that when you perform a full table scan, Oracle doesn't diluvium IO, reading probably one step at a time. If datafile (s) of storage space only contain data for a single table, then a reading series will have to skip segments containing the data in the other tables (as is the case if the tablespace is shared with other tables). The performance improvement is probably low, but it seems that there is a very similarly.
  
  I wish I had the thoughts of DBA experienced about the assumption above.
  
  Thank you for your contribution,
  
  John.

  a reading series will not jump the segments that contain data from other tables

  You are referring to a misleading picture of the operation.

  Let's say 'A' table is a table among a number of tables in a tablespace that consists of one or more data files.
  Since this is one of the many tables, it may not start at the beginning of a data file. His first measure may be somewhere in the middle of the file. The next step may not be nearby with the first step. The 3rd degree can be in different data file.
  So, it's the picture where you see Oracle having to jump the other tables when you do a FullTableScan.

  Now, view the same image:
  Measure 1 is in the 1000 to the 1127 block block (IE 128 blocks) in the data file 6
  Measure 2 is the 2400 block 2527 block in the data file 6
  3 is to the block to block 9371 9245 in datafile 12

  How Oracle does not have a FullTableScan? It starts with the segment header to get a map of the extent (it would read UET$ in a dictionary managed tablespace). He knows now what degrees it should read.
  What is doing?

  He made a call to the operating system to read 1000 blocks Oracle 1127 in the data file 6.
  The operating system then translates this call to starts and ID ranges and the block of the file system.
  The operating system puts this request to the storage subsystem.
  The storage subsystem and then translated the BONE, ID, blockrange to the drive starts, track, sector.
  Assume that these are all the neighbor on the single disc (that is, the volume is not distributed over multiple LUNS and disks).
  Storage reads the information and sends it to the operating system. This can still mean multiple readings, because the head (or several heads because the disc is made up of several trays) does not read 1 MB in an "appeal".
  The operating system then collects the 1 MB and passes it to Oracle.
  Oracle then fills buffers in its cache buffers--(PS: Astuce!) Tip! (: don't you know that it will be not be neighbor memory locations?)
  Microseconds past milliseconds.
  The disc is still spinning (it stops ). It has "evolved" - a different set of blocks are now under the read head.

  Oracle is now asking the OS for blocks of 2400 to 2527 in the data file 6.
  Oracle did not to "jump the other tables. He just made a separate call to the OS with a new range of blocks.
  The operating system now translates the block ID and filenumber at its own mapping.
  Storage then made his translation.
  The disc under the head blocks are very (almost certain) to be a different from blocks together. Not even those corresponding to 1128 Oracle Oracle datafile block 6. Not even the ones corresponding to 2400 block Oracle in Oracle data files.
  We are suffering now fetch - and reading the disk.

  and the story continues...

  And what happens if there is finally another user on the same system? Between the first blocks 1000-1127 call and the second call to blocks 2400-2527, that other user requested blocks 2000 (IE made a call from reading one piece).
  And, after the second measure is read by the user FullTableScan, a third user has requested block 2048 in a single block read call.

  It is important that the Table is not in the neighbor extensions? Even if you did put the table in "adjacent areas" they are not likely to be contiguous on the disk. Even if they are nearby on the disk, they are not likely to be able to read without delay, because the disc has passed.
  And we have not even spoken interleaving where readings from multiple disks need to be coordinated.

  So why still prefer 1Mo diluvium readings in Oracle? Because most SOAs allow a single OS call of up to 1 MB. Therefore, the overhead of Oracle making a call to read 1 MB are experienced only once. If the operating system allowed a maximum of 256KB reads diluvium, even a reading of 1 MB measurement must be carried out as 4 separate calls to the OS (and, recursively, 4 separate calls to the OS for the storage subsystem). We try to reduce the number of calls from software that we do. We cannot reduce the time of access and reading (but allows us to achieve more high "parallelism" in readings striping).

  Hemant K Collette
  http://hemantoracledba.blogspot.com

• Question about 10 g and 11 g on the same server

  I installed 11g on my dev machine (RHEL) and that you have managed to create a new database. Over time, I will also work on upgrading existing databases that reside in 10 g. But, before you start, I was wondering what I should do to be able to connect remotely to each instance. I can't find any documentation on how to configure tnsnames and the listener in a stream environment. I try to minimize service disruptions as well. Any help would be appreciated.

  You have two options:
  (1) run a single listener that will listen to two databases.
  (2) run several headphones each listening to different databases.
  Personally, I like several headphones, but have successfully used two approaches.

  Approach unique listener, use the listener for the latest version of the database. Usually, it will be retro-compatible and support for connections to an old database. The older listener may not function properly with a newer database.
  In the listener.ora under your 11g ORACLE_HOME/network/admin file, you must specify the ORACLE_HOME database for each database that the listener will listen.
  For example, I have the following listener.ora:

  SID_LIST_LISTENER =
    (SID_LIST =
      (SID_DESC=(GLOBAL_DBNAME=ora111)(ORACLE_HOME=/Oracle/product/11.1.0/db_1)(SID_NAME=ora111  ))
      (SID_DESC=(GLOBAL_DBNAME=ora102)(ORACLE_HOME=/Oracle/product/10.2.0/db_1)(SID_NAME=ora102  ))
    )
  
  LISTENER =
    (DESCRIPTION_LIST =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.1)(PORT = 1526))
      )
    )
  

  For multiple listener approach, you'll need each listener to listen on a different port. The example above to listen on port 1526. The default port is 1521.
  For many headphones, each will have its own listener.ora file, and each must have its own port number.
  The tnsnames.ora file must specify the correct port number (the one that is using the listener for this instance).

  If you have connection problems, remember that you can test the Oracle name resolution using tnsping
  Make sure the name of your database is resolved (using tnsnames.ora or ldap or whatever you use) to correct host, port, and SID/service.

• Question about windows theme and display of Web pages

  I have everything, I'm new here, I've had my laptop for about 8 months, but it was stored for the 6 months, so he had only 3 months of use, and that was 99% for watching movies as was my laptop backup (my girlfriends, which was never used)...
  Well I just got my laptop storage and started using it again as I want now to do that my main work computer, it's a Satellite A100 Series. Running Win XP Pro SP2. Well, now I used it for about 1 week now and this is a fantastic computer, expecially the swipe away feature, I'm usually one XP Home Edition, but I do with Pro, just did not have any experience with it...

  Now, here's the problem, and this has always been the problem since bought, when we first bought it and connected to the internet with IE7 fonts have been massive, I figured out how to fix this in the display after a few hours to play settings and also noticed Web pages if there is a background image, it does not appear... (I also found this week is the same for any application on the PC that uses a Web page as Set up, or something, just sectain things... as I open the Security Center in the control panel and everything is white, and background images aren't there (which is white) and even corners which are background pictures are not displayed and comparing to) my other computer, there should be a green and red, background color etc.
  With Windows Media Player buttons should be as purple and black in WMP11, and they like a white background style html on buttons with links to them at the top and playback, stop, etc buttons have a back outside and the inside is white...

  Basically what I'm saying, is that she appears not CSS style WC3 content on some pages and applications on the laptop, and with regard to Web pages that they are exactly the same, I tried IE7, FireFox, front Browser, and still, the only one that displays pages almost as it should is Opera 9.2, but I really need to solve this problem... it is something simple to do with display obioussly , or settings, but I have tried literally every single different way of doing things last week, tried everything in the Control Panel, all toools Toshiba and no results.

  I'm not a beginner, or whatever it is, I can't get this problem, I can't even think of a setting that would do this let alone in trying to resolve this... I have all the Windows updates (although as I said, he did this from the first day of purchase)...

  If I could post a screenhot here I could show you... what Web pages look like in IE7 and FireFox and before (the only difference is Internet Explorer pages is mostly gray and firefox is white, gray is also.)

  Another question, when I was messing with the settings in the Control Panel, under Performace I changed it to something like 'make optimal display for performace' rather than 'Best to display' and it is then my control panel simple with a white background, and everything is not how I'm used, even the categories are made for each section , they are just all grouped together here, and my house Windows on my other laptop is positioned like this, but it at least has a sidebar on the left with a button to change it back...
  now I am at a loss to find the Performace button, as it is there is more, and I want to change it to 'show better for display' not the persomance... so if someone knows how to do this, please let me know... I took a screenshot of my control panel... and it's not naked, I use the Zune Windows (the black buttons and backgrounds theme ), so he used to be a gray background with a status bar on the side with all the links and details dark just like folders etc... So yes, it is another thing that I want to fix.

  Also I do not have the CD to fix it, not more that I think that she needs, but I have a standard out of the box disk Win Xp Pro, I was seriusosly do a fresh install, but I know I'll lose all modules of toshiba and all the extras that it is came up with, that's the only reason for which I don't have as it has Protector Suite QL, that I would have to pay to settle down to do a cleanup, and I really want to do because there is obviously something missing, its as simple as that, there is nothing wrong with the system it is just not set up correctly.

  Here are some screenshots of how I see Web pages, my Security Center Page and my control panel because I messed up he do "Get the best performace of" upward and the screen turned to the basic white and half things in the control panel is now missing, it has been setup in the previous categories... ahhhhh When I try to solve the original problem, I've done another...

  http://i203.Photobucket.com/albums/aa134/phorumws/just%20stuff/ScreenHunter_01-1.jpg

  {It is the Security Center screen when I click in the Panel, that was before I did it fade)

  http://i203.Photobucket.com/albums/aa134/phorumws/just%20stuff/ScreenHunter_02Sep3021.54.jpg

  ("it's now my control panel once I went in ' Premformance and display ' (I think. it was certainly performace in the name of the category)... and I changed a parameter of performance and display which actually use less resources... now I can't change it back, as the button performace is no more :())

  Thanks for reading and I hope although there, can anyone help me cos I hate having to do a fresh install on something as small as this, it is not many programs Add on on my laptop, as I said, it has probably beeen used 20 times ever, and especially for watching movies up to 1 week where it sat in storage for 6 months ago ,,

  Any help would be greatly appreciated... I tried all the Options of the Internet, all the Display Options, all variants, I need something specific, it is not only perform the internet, but the global programs with html style links, etc. and certainly CSS style sheets and the background image in the HTML feature.

  Thanks in advance.

  Hi Jay

  Very impressive display! I can see after 4 days, nobody wrote anything to give you the solution for your problem. I read your announcement with a lot of attention and I have to say that it was not easy to figure out your problem exactly (perhaps because English is not my native language).

  I know very well that new OS install is radical and last solution but I recommend you to check some forums Microsoft WXP because issue described is, in my opinion, more for OS forums for Toshiba forum.

  If you display the same thing in forum Microsoft please post the link, and we can follow the discussion here.

  I wish you good luck and I hope you will find answers soon.

• questions about 2100 wlc and lwap connection

  Hello

  I have a few questions, I hope you can answer me.

  In fact, I have a controller connected to 3 Lwap 2100, and they are connected to the WCS. they have a static IP address.

  The distance between each point of access to more than 30 meters.

  1. the distance between the access points affect the accuracy or the stream. How can I calculate this

  2. because the APs use a static IP address, each customer should I connect to the network to add a static ip address? can I do the APs detect clients dynamically?

  I have lwapp reset guide, guide WCS configuration and configuration guide for WLC. If you have more documents or more pls share with me.

  BR

  Yamani

  Hello Ahmed,.

  Yes the distance between AP affect the wireless signal.

  to determine the best location of AP and the distance between them, as the site survey is necessary with the expert of the spectrum wireless or airmagnat...

  You can check the following links for design and RF management

  1) http://tools.cisco.com/squish/1Ea09

  2) http://tools.cisco.com/squish/51a58

  for other questions about DHCP, it is not a must that customer use static IP, you can always configure them with DHCP.

  as an extenal DHCP (like windows server), or on the WLC himself (to the title of controller-> > internal DHCP tab).

  Kind regards

  Talal

  =========
  Please note the answers that you find useful and mark as answer - when is it :-) - so that others can easily find

• Question about subjects, books and tables of contents

  I have a question about the subjects, books and tocs. I have a project that someone else created, and my task is to create a new topic and add it to the table of contents. I created the topic, but when I generate CHM project it does not appear in the table of contents. I tried to update the table of contents. What I think (I guess) could be the problem, is the 'links to the topics', when I see the links to the topics in other areas (old) they seem to have a link to the main book, but the new one is not mine. Could you help me? Thank you!!!

  It seems that you have a manual table of contents page, rather than using the table of contents of CHM.

  The toc.htm topic that you see in your list of topics is probably where you will need to add your new topic.

  If the table of contents was already populated when you inherited the project, I suspect the previous author was using it just to keep track of the topics they had added manually to the topic toc.htm - added the CHM topic in summary you did mark the column of the table of contents in the list of topics like '' Yes. '' then add to the toc.htm manual is not. Hope that makes sense.

  P.S. Just guess that it is installing what I can see in the screenshot. It is quite unusual, so I hope I'm right.

• Questions about payment, cancellation, and planning for your review of VCA - VTC

  Fellow VCA (midshipman).

  I'm ready to go for my review of VCA - VTC, but I was interested in how you can pay for the exam and how much it costs. The last question, I think I found the answer to and $95, which is about €70? So, I registered for the exam with the assumption that I had to abandon in payment details before I confirmed. Unfortunately, I was already permanently registered after the first screen, I had to fill in and got an email sending me on the Pearson VIEW site. So I'm rather perplexed how me or maybe my employer can I pay for this review, if I can actually cancel it and if it is mandatory for me now to pass this review, now that I am registered of course for her.

  Kind regards

  Chris

  What you have said, I guess that the first site you visited was vmware.com and you completed the licensing process for the review.

  This operation generates an ID for you on VMware and PearsonVUE systems then this means that you can program review and pay via PearsonVUE.

  I don't think at this stage there is no obligation to actually go ahead and take the exam.

• Question about Lab Manager and ESX Resource Pools

  Hello world

  I was wondering if I can get feedback from some of the members of the community.  We used Lab Manager very strongly in our support organizations and it has proved to be a valuable tool.  Recently, we collaborated with the Department of technical training and started hosting online seminars and classes for them using Lab Manager.  Last week we had a fairly large class of users (approx. 45), each duty deploy 2 rather Beefy VMs that were very intensive resources (Jboss, SQL, Mail to name a few).  My colleague and I went through a lot of trials and planning to ensure that our infrastructure can handle the load while allowing our users to date at the same speed and reliability, so that they are used.

  Our Lab Manager ESX server pools made up of the following:

  5 HP DL380 G5 servers with 2 x Quad Core 2.8 GHZ processors (8 cores each) with 32 GB of RAM each

  2 HP DL580 G5 servers with 4 x Quad Core 2.8 GHZ processors (16 cores each) with 128 GB of RAM each

  When the class is running and everyone has made their 2 machines, we noticed for some reason, he was all on ESX2 and 3 deployment (380 s).  Then came the ESX alarms, use of 90% of memory, then more than 100% bringing the disk page.  The CPU usage was at a all time high.

  I look at the 2 580 s and there are about 4 virtual machines deployed on them.

  So my question is...

  How does he know where to launch a Virtual Lab Manager machine?  There's no sense 2 servers have been brought to the red zone, and almost overloaded when the 2 most powerful servers in my farm are nearly dormant.  I noticed sometimes in the past, but not this bad.  Normally, we have about 45-50 computers deployed at some point and it seems to spread them out properly.

  This group of training has access to the same LUN and ESX server with Betclick as any other organization that we have.

  We have decided hosting several sessions of training may be greater than this one and would like to know that the virtual machines will be distributed properly.

  I would like to know your opinion on this

  First to answer your question, then make guess what happens.

  As indicated in response Ilya, LM distributed VMs differently with active DRS resource pools and pools of resources without active DRS.

  LM place VMs when the DRS is not used.

  When DRS is used, we use the DRS admission control to select the host to place virtual machines.

  DRS is turned off, LM uses its own placement routine:

  For each virtual machine, LM filter all managed servers that cannot run the virtual machine. A complete list of patterns are:

  • The managed server has not enough memory or quota for virtual machine to run the virtual machine.

  • The host is not connected to the data store that is the virtual machine.

  • The virtual machine has active state (suspended) and the CPU of the server managed by the waking state has been captured is not compatible with the managed server currently considered.

  • The virtual machine has been a guest on 64-bit and the managed server is not 64-bit capable.

  • The virtual machine has more processors than the managed server.

  • The managed server is not accessible or is set to "prohibit deployments." Not reachable may mean that the lm-agent or its not to ping queries is not answer (this is visible in the list of managed server page).

  Once we have the complete list of eligible servers, we place the virtual machines on the host including the smallest (MemoryReservation % + CPUReservation %). By default, we reserve not CPU on LM VMs, this internship will be largely due to the memory on the host computers if you have not changed the settings of reservation of CPU on your virtual machines.

  For closed deploy to the PF3, force us all virtual machines to go on the same host, so if any virtual machines have any special data store / CPU type specification, all virtual machines is forced to go on this host. If there are conflicting requirements between different virtual machines in the same configuration, deployment will fail. Closed VMs also have another condition to check that is rarely achieved in practice: number of closed networks available on the managed server. By default, this is 20 and you will need more than 20 different configurations closed running on a managed server before you who will strike.  (LM4 allows Cross fencing host, so this does not apply in LM4).

  To make a guess blind because of your distribution problem - if you use the saved state and fencing, it's probably the type of processor.  Processor type can be checked on the host properties page.

  If you not are not I would check that the images can deploy on the 580 s by disabling the 380s and trying to deploy them.

  If you use DRS (which you're not), it could be due to deployment of virtual machines too fast for the algorithm of control for the entrance of VC.  An easy solution for this is to extinguish the DRS on the cluster manager of laboratory.

  We tested load internal repeatedly, the product QA in different laboratories, we run (LM has been used in VMworld Labs for the past couple years and internal systems of training and demonstration for our Organization implemented SE), so no need to worry about this.  I assure you that the first 'real' performance problem you will encounter will be almost certainly due to an overload of your storage array (too many IOPS / s)... and for that you have to distribute content in data warehouses and use techniques of creating paths to balance the load.

  Kind regards

  Steven

  Another thread on this: http://communities.vmware.com/message/1258902.