Formula of contour and the UDA load in Essbase by ODI

Similar Questions

• When I start the system, I get the message "failed to load Launcher dll" I hit OK and the system load and seems to work.

  I am under Windows Vista Home and when I start the system, I get the message "failed to load Launcher dll" I hit OK and the system load and seems to work. I'm afraid that something is not correct, what do you recommend? The two available Service Packs have been installed.

  Discussions were merged.

  Deleted duplicate.

  Original title: failure of the Dll

  The error seems to be a common problem with Dell laptops:

  http://en.community.Dell.com/search/#q=Lanucher%20dll&sort=rating%20desc&defaultAskForumId=0&pi1680537405=1

  It seems that apoint.exe gives the error that indicates that the problem is with the Alps touchpad driver.

  Try to uninstall the Alps touchpad driver and then install the latest version available from Dell for your laptop:

  http://www.Dell.com/support/home/ca/en/cabsdt1/product-support/product/Inspiron-1545/drivers

• How can I replace my app on iTunes Connect with a new version with air for iOS and app Loader?, how do I replace my app on iTunes Connect with a new version with AIR for iOS and the Application Loader?

  How can I replace my app on iTunes Connect with a new version with air for iOS and app Loader?, how do I replace my app on iTunes Connect with a new version with AIR for iOS and the Application Loader? I got an error that the version number needs to be updated. I created a new record in iTunes Connect with version 1.1 and I took ownership of my current app 1.1 in air for iOS section in Flash.

  Check your descriptor file to make sure that it shows the updated version, too.

• Question about Excel AddIn and the UDA in Excel

  Hi all
  
  I have a dimension attribute, and I am able to recover data in Excel and drill down based on the size of the attribute.
  
  But when I try to do the same exercise using a UDA, I get weird errors. Has anyone tried the same thing with the UDA?
  
  Thank you.

  UDAs can be selected through the Select Members dialog box, but cannot be drilled in on because Adu do not have a corresponding dimension; attributes do - that's why you can break into an attribute.

  I tend to use aggregates for purposes of calc - I prefer to maintain a contour with UDAs creation never reported on the hierarchies to select a group of members.

  Kind regards

  Cameron Lackpour

• Problems with the formula of Member and the consolidation

  Hello
  
  I have a cube that contains information about a number of funds. Information we hold is to these two funds level (ie. the price of the various funds, the status of funds) or at the level of the transaction (say. premiums and claims transactions).
  
  The outline looks a bit like this.
  
  Account
  -Premium +.
  -Claims.
  -Taking P/L + (UDA: HoldingP/L)
  Transaction type
  -Units ~
  -Value ~
  Profit/loss ~
  -Price ~
  -Status ~.
  -Calc profit/loss ~ (see formula below)
  Fund
  -AAA +.
  -AAB +.
  -AAC +.
  -etc.
  Time
  -Jan_10 dynamic Calc
  --05 - jan +.
  --06 - jan +.
  
  Now I have a formula a little complex, sitting in the Calc profit/loss as follows Member
  
  IF (@ISLEV (account, 0))
  
  IF (@ISUDA (' HoldingP/L' account))
  IF ('Status' == 0)
  'Result '.
  ON THE OTHER
  Do a calc more fantasy based on different price and the units of the other members of the account;
  ENDIF
  OTHERWISE other calc
  ENDIF
  
  ON THE OTHER
  @SUM (@CHILDREN (@CURRMBR (account)));
  ENDIF;
  
  
  Now this calc seems to work for yourself and give me the answer I want. However, I am having a problem trying to get back to the level of the Member of Jan_10. While my other types of transactions seem fine, consolidate the profit/loss Calc going widely indicated.
  
  I've identified what I think it is, but I don't know how I could fix it.
  
  Because I have my days the value of consolidation, which basically means that it adds set ups for Jan_10, prices of all individuals of the day. This tilts the calculation rather that just add to the top individual days Calc Profit/Loss, he's trying to calculate the Jan_10 totals.
  
  Does make sense? If this isn't the case, I could whip up a quick table of data showing the problem.

  Have you tried setting the calc member two passes?

  It is quite complex, so it might not help, but worth it. Give it a try.

• XWRITE using RELATIVE and the UDA functions

  Hello

  I need to write BSO planning data to cube HPCM BSO.

  I need the sum that the cost data of the members according to the UDA centres "85111010" and all the members of level 0 at a unique crossroads of HPCM. I executed the script below, but I'm not able to see the data in HPCM.

  Can I use

  Fix ("FY14", "DC", "May", "E72701")

  DIFFICULTY (@UDA ("Cost Center", "85111010"), @RELATIVE("A50000000_0000",0), 'LOW')

  "BUD".

  (

  @XWRITE ('BUD', _Alloc3C_,"BUD","[1_AllocAccount]@[85151010]","DirectAllocation","OverDrivenCost","[1_AllocCC]. [Impact] ',' [2_AllocCC]. [Impact] ',' [3_AllocCC]. [Impact] ',' [4_AllocCC]. [Impact] ',' [5_AllocCC]. [Impact] ',' [5_AllocCC_intra]. [Impact] ',' [2_AllocAccount]. [Impact] ',' [3_AllocAccount]. [Impact] ',' [4_AllocAccount]. [Impact] ',' [5_AllocAccount]. [Impact] ',' [5_AllocAccount_intra]. [Impact] ',' [1_Project]. [Impact] ',' [2_Project]. [Impact] ») ;

  )

  ENDFIX

  ENDFIX

  Do I need to use variables to store the values of top of page A50000000_0000 parent level. Please let me know.

  Thank you
  Vishal

  You can do the SUM of accounts / UDA in the expression (the first parameter @XWRITE).  According to the documentation, you should be able to place an expression that returns a numeric value.  Just put everything in a MESS doesn't work pas-@XWRITE each of these intersections will be seen as a cell separate to write to the target; He doesn't know you want to make the amount of them.

  What is the full dimensionality of the cube source and target?

• Error using App Builder and the Application Loader

  Hello

  We have created for many App App Builder before and after the release of v27 we tried to put a couple of App update so we get in the App Designer, under the v26 version to v27 (has not changed anything else!) and rebuild the application. Now, we want to use the Application Loader to download the App on iTunes Connect, but whenever we receive this message:

  "The binary being analyzed must be an executable: /var/folders/9x/.../..._v27_distribution-viewer.zip/viewer.app/viewer.

  We are rebuilding the application several times, updated the App Builder but nothing works. Anyone have an idea?

  Concerning

  Sven

  You are using Mac OS X 10.6.8 or earlier? If so, it is probably the problem. We always try to know that if it's something the team of DPS App Builder control on. Until they learn, the best approach is to use a computer with Mac OS X 10.7 or later to install the loader app (available on a connection, iTunes link), copy or download the .zip file and download it. Alternatively, update your machine to use Mac OS X 10.7 or higher. I'll let you know when I find more information.

• SVCHOST eats RAM and the CPU load

  Greetings! I have problems with this thing. Svchost, I did a lot of research and it is not fixed...
  It is somehow overloading CPU to 100% and eats RAM. If I kill the process that's somehow affects the sound and the windows theme, it makes them bounce like classic Windows. I really want to re install Windows, I am currently using Windows XP. While I play WoW, and I get massive lag. I check the Task Manager and I see that SVCHOST is the higher usage of memory and cpu. It goes like 600 000 K + and if I do not cancel the process computer slows down as turtle.

  Any ideas how to solve this problem? Please be specific, I can't find good resource for this cataclysmic problem :/

  Thank you!

  Svchost.exe is an application used by various applications. Usually, the problem isn't with svchost.exe but with the application that is running the service that is using svchost.exe. At any time, you can have a number any process ongoing svchost.exe to run and you have to identify who it is that is causing the problem. The process PID number is no help as it changes from one computer to another and each time that you start the computer. The constants are the command line and there are about 10 commonly used. You can't see them using the Task Manager. You need Process Explorer (freeware from Microsoft).
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

  You will see what copy of svchost.exe is more active, and if you right click on the process, you will see a list of services that use this particular process. Svchost.exe - k netsvc is an example of a command line. Uses a number of services and often causing the problems of this group is wuaserv, which relates to Windows Update. Once you have identified the service that you have to identify the application using the service. In the example I gave, it's pretty obvious, but others are not so easy to determine.

• The data load has run in Odi but still some interfaces are running in the operator tab

  Hi Experts,

  I'm working on the customization of the olive TREE, we run the incremental load every day. Data loading is completed successfully, but the operator status icon tab showing some interfaces running.

  Could you please, what is the reason behind still running the interfaces tab of the operator. Thanks to Advance.your valuable suggestion is very useful.

  Kind regards

  REDA

  What we called stale session and can be removed with the restart of the agent.

  You can also manually clean session expired operator.

• help with the menu button and the film load

  Hi all... I am very new to flash and actionscripting and I am self-taught using mainly Internet searches.
  I'm building a site with a menu and a banner that is controlled by the menu (two swf files). I got to the make contact however, I'm stuck at this point.
  When 'bt_1' is hit I would like to be respected a "mv_1" to load in the banner.swf with intro animation... this I figured out how to... but now when you click on "bt_2" I want to play the rest of the animation of "mv_1" to unload the film before loading "mv_2" with its animation enterance respected... that I would make to several buttons. The method that I use for my local connection is...
  
  Sending script
  mySender = new LocalConnection();
  on (release) {}
  ------each button corresponds to a different setting... 1,2,3,4,5,6
  _root.mySender.send ("menuconnect", "action", 1);
  ------This is the best way that I could understand to disable the buttons appropriate... There might be a better way?
  Home.Enabled = false;
  couple.enabled = true;
  Events.enabled = true;
  Bridal.enabled = true;
  Media.enabled|disabled = true;
  RSVP.enabled = true;
  }
  
  
  
  Script of reception
  
  myReceiver = new LocalConnection();
  myReceiver.action = {function (doThis)}
  If (this == 1)
  gotoAndPlay (2);
  If (this == 2)
  gotoAndPlay (3);
  };
  and so and soforth for all six buttons
  myReceiver.connect ("menuconnect");
  
  If all this makes no sense at all, I'm sorry... I tried my best...
  If some pro out there can understand what I'm trying to do and can help me I would greatly appreciate it... Thank you all
  
  SJS

  I would like to use the ID to link to each of your mv_1, mv_2 etc. in the main stage and control them. This would have the advantage of eliminating the duplication of code and keeping most of your code in one place (image 1 of your _root timeline).

  If mc_1 etc was connection id mc_1ID etc, the other began on a frame labeled "outro" and ended on the last image, you can use:

• Toggle "scale of the contours and the effects?

  Everyone want to 'Scale Strokes & Effects' should be a toggle UI higher level preferences buried in?  I find it often useful to switch between two States scaling of the same project.

  Or am I missing a shortcut for this?

  Although it is not a shortcut, you can also change this setting in the transformation Panel and clicking the scale tool...

• Is there a way to temporarily disable "scale of the contours and the effects?

  I want to be able measure some cards without changing the size of the race. But I don't want this preference permanently changed. Y at - it a key to keep down so that when I enlarge the cards the size of stroke remains like that? Thank you...

  Julie

  Julie,

  Just check/uncheck it in the Transform palette dialog box.

  You can also do it with flexibility.

  If you want to increase by a factor of 5 but only double the weight/effect/that race, you can check strokes & effects of scale and scale upward by a factor of 2, then uncheck the strokes & effects of scale and scale upward by a factor of 2.5 to reach the total factor of 5.

• Formulas 10 / 11 and the new Java 1.7. ... When it is certified?

  User work more and more with the new java 1.7...
  
  How (and when) I can change my configs on the middle tier, so that they work with the right
  
  jpi_mimetype
  jpi_codebase
  jpi_classid
  and jpi_download_page
  
  Thanks for the replies
  Gerd
  
  and also thanks for the advice like "it is not certified with Oracle. Read this article from metalink here... "or something similar.

  It is not yet certified but we'll probably focus on 11g for certification (as 10g support ends Dec 2011) - we've already found a few bugs with the 11g certification (but someone on the forum tried it and got, it works to a certain extent, chances are)
  concerning
  Grant

• How to add the UDA to an input text ODI file?

  Hello
  I have a simple question. I use ODI to build my dimension BOM as shown below.
  By default, Alias, Type of data storage, calculation of re encoding, Data Base, Plan Type (COST), aggregation (COST), custom attribute, UDA, UDA1, UDA2, operation, Description, Parent, TLA currency
  T491-00178, T661-00006, Unspecified, 1, ~, updated
  T491-00178, T661-00009, SHARED, Unspecified, 1, ~, updated
  Form T661-00038, T661-00009, Unspecified, 1, ~, updated
  
  How can I add a UDA to one of the above lines?
  Thank you.

  Hello

  Good reading here on a blog that I wrote covering how to load several UDAs

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• The scale of the contours and effects in Photoshop CS5

  The scale of the contours and the effects option to reside in the Preferences dialog box.

  Seems like it has been deleted in CS5, anyonene know why, or where a similar function

  can be found?

  Thing is, when I add a stroke (layer effect) of a layer, the thickness is the same when I

  Transform/Resize(Ctrl-T) layer. I really need the border to shrink accordingly as shown in

  the image below.

  A solution would be to convert the layer of dynamic object, but when you work with too many

  layers, it's more about saving time.

  

  Don't remember seeing such an option in the preferences. You are getting confused with Illustrator.