WCF services in IIS8 R2 Windows Server 2012

Hello

I'm currently migrating my WCF service written on Visual Studio 2008 for Windows R2 2012

The IIS version 8

I created a virtual directory for the .svc services and properly mapped to the physical path (the source is in my c:\)

I traced the application pool for .net 2.0

When I try to hit the service it throws error as resource not found

The resource is not found.

Description: HTTP 404. The resource you are looking for (or one of its dependencies) might have been removed, had its name changed, or is temporarily unavailable.  Check the following URL and make sure that it is spelled correctly

In order to confirm whether WCF (.svc files) work I created a WCF Service test in Visual Studion 2012 and hosted even by default (4) in 8 with IIS application pool and it works.

So I'm sure that some issue over version 2.0 configuration.

Grateful if you could help me on this issue.

Thank you

Diakite

Hello

Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

See you soon.

Tags: Windows

Similar Questions

  • Active directory Migration from Windows Server 2003 to Windows server 2012

    Hi all

    Currently, I use the windows Server 2003 R2 Enterprise SP2 with AD, DNS and DHCP server. I want migration of these services to new fresh Windows Server 2012 R2 Standard machine. I migrate to active directory after this statement: http://social.technet.microsoft.com/wiki/contents/articles/22249.migrate-active-directory-from-windows-server-2003-r2-to-windows-server-2012-r2.aspx, he gets with success, but the IP configuration on the source server not migrated to the destination server. So, all of you know that why the source server IP configuration cannot migrate to the destination server?

    Help please give me an advice.

    Thank you

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    TechNet forums:

    https://social.technet.Microsoft.com/forums/en-us/home

    MSDN forums:

    https://social.msdn.Microsoft.com/forums/en-us/home

    See you soon.

  • Windows server 2012 default behavior services

    Hi all

    I recently installed Windows server 2012 R2 on my PC and found that the Windows update service "wuauserv" starts and stops automatically after a certain time. I think the same happens for Windows 8 and 10 more. The startup type indicates that automatic (early release). Through various articles and forums, I realized that this is the default behavior, introduced in Windows where inactive services will stop automatically and works only when triggered by certain policies.

    I want to change this default behavior and want Windows update services to be able to run always. Could you please tell how to make these changes.

    Kind regards

    ADI

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

    If you give us a link to the new thread we can point to some resources it
  • Unable to use the service Windows Server 2012 EAP - MD5

    Hello

    I tried using MS Windows Server 2012 the authentication server installation, I turned on the NPS server, installation and set up roles. Then I followed https://support.microsoft.com/en-us/kb/922574 thread to add support of MD5 by default it is obsolete.

    Now I'm able to see the added registry entries and you can select the MD5 method, but I do not know where to give the password of the application. I added the InvodeUsername and the InvokePasswordDialog in regedit but its only gives me such an option to select the user name and password.

    I'm getting MD5 challenge sent by 2012 to the authenticator switch and finally Reject-request.

    Can you know me how to provide the password in 2012.

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    See you soon.

  • Put into service Windows Server 2012 R2 takes a long time

    I created a simple bluerpint with Windows Server R2 2012 machine and the deployment of the Clone related vCAC. The whole process of commissioning is to take a very long time (> 1 hour). It seems that most of the time is passed to the workflow to work CustomizeOS stage. What could be the problem? I have not found the newspaper to find out where she is spending time. Can you help me solve this problem?

    I could solve this problem. There is a new Agent for Windows Server 2012 R2 guest. See VCAC 6.0.1 agent 2012 comments stuck Windows

  • CF 9 and Windows Server 2012

    The installer has announced will work for CF 9 as well, so that CF9 runs on Windows Server 2012?

    New supported platform for ColdFusion 10

    Adobe Announces Microsoft Windows 8 and Microsoft Windows Server 2012 platform support for ColdFusion 10. 10 ColdFusion windows installers have been updated to support new platforms. Installers can be downloaded from the ColdFusion 10 product downloads page.

    Last 10 ColdFusion Windows installers,

    1. Support of Windows 8 and Windows Server 2012.
    2. Support 8 Internet Services (IIS8).
    3. Include the JRE 1.7 update 15.
    4. Include ColdFusion 10 mandatory update.

    Important note: ColdFusion 8 of 10 update must be applied with the latest windows installer 10 ColdFusion. For more details refer to this article.

    CF9 not supported Windows 2012.

    http://wwwimages.Adobe.com/www.Adobe.com/content/dam/Adobe/en/products/ColdFusion/PDFs/Col dfusion9-support-matrix-4 - ue.pdf

    Odd Windows 2008 r2 is not on the list of support CF9 yet many people use this platform.

    HTH, Carl.

  • Windows Server 2012 R2 Datacenter - "we couldn't complete updates of changes to undo; do not turn off your computer.

    There are approximately 247 updated to do with this Windows Server & as before in the past w / various different OS that I discovered that these must be mounted separately & batch too for these works correctly!

    There must be - a kind of server 2012/r2 cumulative hotfix / service pack that will sort most of these problems of updates w / a download link for getting these!

    But how & in which updates of the batch/grna they do have to do to finish correctly without these issues and so on!

    example"separate updates like this should be done in separate lots and so on!

    (a) Internet Explorer updates

    (b) .NET Framework 4.6

    (c) KB * item updates made in various lots of diferent etc.

    Thanks a lot for your help as it is very much appreciated! A little more the last hours of your answer I had actually beta tested who follows & found that if you keep w / the following it works actually & w/out any error!

    ***************************************

    Windows Server 2012 R2 Datacenter - updates!
    Manually set the updates of Windows Server R2 Datacenter 2012 as follows"
    ' Check for updates but let me choose whether to downloadand install them.
    ***************************************
    (c) Finally,... There are several optional updates to do that must also be separated for installs them!

    1 Microsoft Silverlight (KB3182373)

    6 update to Windows Server 2012 R2

    "(b) s @ less (233) KB * important updates that should be made in separate batches of selected manually - from a @ bottom & goes to the high c as follows.

    119 for Windows Server R2 2012
    98 security Update for Windows Server R2 2012
    1 acumulative Security Update for Internet Explore 11
    1 cumulative reliability for Microsoft .net 4.6
    1 security Update for Microsoft ASP.NET
    13 4.6 .net Framework

    (a) there were several original KB * updates manually, I downloaded & installed directly from the "Microsoft Download Center" w / some which are detailed below.

    1 Windows Server 2012 R2 Update (KB2919355)
    1 update to Windows Server 2012 R2 (KB2883200)

  • R2 Windows Server 2012

    Hello

    I use windows server 2012 r2 and have some difficulty at the start of services such as, AenService, gupdte, the windows module installer does not start, I tried to start it manuely but the result was the same, please give me the solution

    Concerning

    Jean baby

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    TechNet forums:

    https://social.technet.Microsoft.com/forums/en-us/home

    MSDN forums:

    https://social.msdn.Microsoft.com/forums/en-us/home

    See you soon.

  • Can not remove the print server role (Windows server 2012)

    I have a small question... I'm trying to remove a role (print server) on my Windows Server 2012. (Yes I know, I need to go to "Add/Remove role")

    but each time, the server establishes the uninstall procedure, but when it's time to restart and complete the procedure... the server fail and cancel everything... so in the end I always install the print server.

    I try to stop a link of service in this role (as a spooler, printing...) but samething.

    If anyone can help me, I really appreciate it.

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    See you soon.

  • Prerequisites for domain controller promotion is not for windows server 2012

    For windows server 2012 check of preconditions for the promotion of domain controller has failed. TCP ports required by Active Directory Domain Services are already in use on this computer. You must remove or reconfigure the services that currently use these ports (88, 389, 636, 3268, 3269).

    Support is located in the Windows Server Forums:
    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

  • IIS on Windows Server 2012 R2 8.5 sends error 401.2 when change password Administrator windows local, 500 errors

    IIS on Windows Server 2012 R2 8.5 sends error 401.2 when change password Administrator windows local, 500 errors

    This particular configuration is with Coldfusion 11. There is no errors in newspapers and the w3 service still works as are application pools. All websites and app pools run with transmission of authentication request.

    ColdFusion does not work with windows authentication and may be enforced as if reconfigured integrated instance to do this, if this isn't a matter of colfusion.

    Here is what I tried:

    1 I created a new user account with admin rights and disconnected and logged in as them and then make changes to the password on the server, and that didn't make a difference.
    2. I checked that all Web sites using the request pass through authentication.
    3. I checked that the application pool is also using the application-pass-through authentication.
    4. I looked to find errors in which case newspapers but don't see anything there either
    5. I also searched a failure in coldfusion logs and saw no more relevant here either, but I got colfusion running without IIS in any case.
    6. search of the roots of web for coded passwords hard and found nothing.

    If you have any ideas or any ideas let me know.

    Hello

    The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  • Transformation of MSXML fails in Windows Server 2012 for adults

    I am transforming xml using the transformNodeToObject below method using VB Script:

    Dim oData
    Set oData = createobject ("MSXML2. DOMDocument.6.0")
    With oData
    . Async = False
    In the opposite case. LoadXML (DataNode) then alert "could not load DataNode.  "&. parseError.reason
    Ends with

    OTMPC Dim
    The value of OTMPC = createobject ("MSXML2.") DOMDocument.6.0")

    oData.transformNodeToObject style, the OTMPC

    I get the error in Windows Server 2012below.

    -2147024882 is not enough storage is available to complete this operation.

    This error occurs only in Windows Server 2012. The above code works fine with Windows 7 (MSXML). I noticed the name of the product of msxml6.dll in Windows 7 is MSXML 6.0 SP3 and Microsoft XML Core Services in Windows Server 2012. Also I noticed the Task Manager, it took more memory in Windows Server 2012.

    The above code works fine in all lower versions of the operating system except Windows Server 2012. Please give the solution for this.

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    See you soon.

  • Question of SEH Exception occurring on windows server 2012

    Hey, partner,

    One of our client running a desktop application that is developed using .net and some 3rd party controls.

    They had updated to Windows server 2008 R2 to Windows server 2012 R2.

    And using Sql Server 2012.

    They receive the SEH exception on Terminal server environment permanently.

    They restart the server. It is not reproducible on demand.

    Is - this Microsoft provided service packs or hotfixes for this kind of questions?

    Here are the logs of the sample

    Source of the exception: System.Windows.Forms
    Exception type: System.Runtime.InteropServices.SEHException
    Exception message: external component has thrown an exception.
    Exception target site: DispatchMessageW
    -Stack trace-
    to System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW (MSG & msg)
    at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop (Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
    at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner (Int32 reason, ApplicationContext context)
    at System.Windows.Forms.Application.ThreadContext.RunMessageLoop (Int32 reason, ApplicationContext context)
    at System.Windows.Forms.Application.Run (ApplicationContext context)

    System.Runtime.InteropServices.SEHException
    External component has thrown an exception.

    Thank you

    Srinivas

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
    *
  • Windows Server 2012 R2 Standard Radius Client support

    Hi team,

    In 2012 R2, the NPS Service server used for authentication. It uses the Radius Clients as authenticator. There is no online documents about the number of clients supported by the Windows Server 2012 R2 Standard Edition and Datacenter. Might well want to mention the number of clients supported by the version

    Thank you

    Sudhakar

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    See you soon.

  • Windows Server 2012 Foundation - installation of recovery DVDs - Activation question

    Hi all

    Please could you help me with the following text:

    After the installation of Windows Server 2012 Foundation of Fujitsu Operating System Recovery DVD Fujitsu server activation does not work. Error code: 0xC004E003, Error Description: The Software Licensing Service reported that license evaluation failed.

    Thank you

    Ivo

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

Maybe you are looking for