Question about lesson 1-7, slide 2: Iterable.forEach () and parallel execution

Similar Questions

• Questions about vCSHB 6.5.1 (LAN or WAN and physical vs. virtual secondary server)

  Hello

  I have a few questions about vCSHB 6.5.1:

  1) there are two sets of installation guides: one for secondary physical server and a secondary server.

  What are the main differences between these two scenarios?

  (2) for vCSHB, there are two deployment options: LAN and WAN

  2 (a) which option is most common?

  2 (b) If an option (for example, LAN) works in an environment, can I assume that the other would work as well?
  And what a difference these two options?

  (3) is vCSHB backward compatible? VCSHB 6.5.1 works in an environment where an earlier version (for example vCSHB 6.4) works?

  (4) what version of vCSHB (e.g. vCSHB 6.5 or 6.4 and 6.3) is widely deployed today?

  Thank you.

  (1) there should be nominal differences - what is different is discussed the virtual network set up against the physical network implemented

  2 (a), in my experience LAN configuration is more common because it over a high availability solution oppesed to DR.

  2 (b) not necessarily, you should make sure that the appropriate ports are open

  (3) I think it is but you have to bring everything up to a compatible version as a best practice

  (4) I'd go with the latest version as it has been out for a few weeks-

• Published SWF file shows no questions about their Captivate 8 slides

  I created a questionnaire in 8 Captivate (using Windows 7 so this is important). If I publish this quiz to HTML5, it works fine. However, if I publish to SWF format (in order to use the widgets) the first slide works, but as the whole issue of the slides are empty!

  I have republished this Quiz 20 times tweaking the settings back and forth but cannot get this to work, any ideas what could be the problem?

  First slide:

  

  First Question slide:

  

  Check if you have Slide Master set objects to be above empty slides.

• Questions about lessons 1-6

  1. I understand the code for callback using CountingDevice, except for 1 thing...  Why TestIMlet called device.start rather than device.run.  There is no start method in CountingDevice.  There is a method of execution.  How to get device.start converted to device.run?

  2 to 08:50 in the video, you click on an icon in the EmbeddedExternalDevice which resembles a down pointing line error.  When I click on it, I get a dialog box that is displayed that says install IMlet Suite.  He then asks an IMlet Suite path or a URL.  What does this button do?  Why don't you get the dialog box, I want to come?

  3. I constantly for restart my PuTTY connection and restart Java on the invoice, pro forma.  Maybe it's because I close my external device integrated at the end of each debugging session.  This is perhaps related to the fact that I do not have what you do when you click on this icon in my question 2.  Please explain what I do to keep my work of connection of the device.

  4. is it possible to automatically start Java on the invoice, pro forma?  Surely, there must be a better way that with a PuTTY to run a script on the invoice, pro forma.  If the pi should be deployed in the real world, we do not want to have to do that.  It will look later in the course?

  Thanks for a great start in this course!

  ClarkS

  Hi Clark

  The start() method that call you is inherited from Thread - it triggers the mechanism of Thread. Once started, the thread will be called run().

  If we called run() directly, the code would run in the calling Thread, rather than in a separate Thread, which is not what we want.

  Mark

• Question about the music library to iCloud (music Apple) and iTunes on mac

  Download I m just of my iTunes in the music library of iCloud library. Since I was afraid that my library of 40000 + titles could get corrupted or metadata could be changed by apple, I downloaded the files from a 'second' machine (macbook) - just to be on the safe side and keep my iTunes library local main on my iMac intact by iCloud (for the moment).

  Now everything seems fine with iCloud music library, but after all the titles/songs are in iCloud now, what happens if I disable the library iCloud music on the 'second' machine and Activate the library iCloud music on my main machine (iMac), which has the same local as my second machine iTunes library? (= the same local iTunes library, which has been already downloaded?)

  ICloud/iTunes will recognize that all songs/files are already uploaded to the music library iCloud and doe 'nothing', or download will process all over again and will lead to 'double' all the files/songs in iCloud?

  The same question arises if we restore iTunes library local on a mac from a backup + switches on iCloud music library a second time... will be iTunes + icloud music library download all the files again or not?

  Unless something is wrong, it should recognize and not duplicate.

• Question about the Texture of the paper, distressed Edge and a specific color overlay

  Hello!

  I searched for the answer to this question without luck so far - would love to hear if anyone knows how I can do this!

  I try to combine a texture of watercolor paper with a border of sponge (as much as I do) and then having the watercolor paper corresponds to a pantone color specific of my palette.

  When I superimpose a color on white paper in one of the blending modes it seems not good. Is the same for setting the opacity of the color so that the texture is evident.

  I feel that my question is not clear, so I'll try to summarize in screencaps!

  

  I'm trying to make the texture in a color mark, so I don't have clearance for the color to a lighter shade, etc.

  Someone at - it ideas?

  Thank you very much!

  Texture and color in blending mode multiply, order should not issue. Then load the edge as a layer mask.

• Question about the reduction of noise/hiss & fade in and out

  Hello I am new to hearing. I use Audition CS5.5. I was wondering how I can remove the "whistling" singing (whenever the words with "s" or "EC" are sung as "silence" or "stones"). I have a multitrack project open and I have the vocal track selected, but the function "hiss reduction" Effects-> noise reduction/restoration is gray. Similarly, "noise reduction" and "capture point noise" is also grayed out (even if I have a section of the track selected with the time selection tool). Why are these unusable?

  Another question is how can I add fade in/out effects in multitrack view? I know that I can draw lines for the fade in and out while a single track is selected, but I always like to use multitrack view, while working so that I could easily move the vocals to match the music.

  Thank you.

  Noise reduction is an effect that only works in Edit/Waveform mode.  It doesn't have multitrack real-time.

  However what you're saying, your problem is the sibilance not "whistling" anyway.  Hiss reduction is there to get a constant background hissing like a pre amp out in noisy mic.  You may do better by using what is called a De-Esser which you find in the FFT filter under filters and EQ or compressor multiband in the effects of Amplitude and Compression.  I must be a bit vague because I've never bothered with CS5.5 in order to remember here is that it was these effects.

  On your other question, you have "volume envelopes" in multitrack view and can 'draw lines' it too.  If you do not get them, go to the view menu and make sure that "Show Clip Volume envelopes" is checked.

• Satellite M70-340: Question about the warranty if I buy in Russia and move to Australia

  I would buy the Satellite M70-340 laptop here in Russia. Next month I'll move to Australia. What the warranty in this case?

  Will I be charged if problems occur?
  How can I recognize a laptop that is officially sold (= I mean legally delivered and comes with a guarantee in the world)?

  Thank you very much for your answer!

  To my knowledge, you can save your laptop on the European site of Toshiba for services and extensions of warranty and uprisings.
  The serial number of the laptop must be registered generally on this site.
  I think you can buy a few additional warranty packages that allow you to get the guarantee availability in the world.

  But usually if something goes wrong on the laptop you will need to contact Toshiba authorized service partner in your country.
  On the Toshiba support page, you will also find a database for service partners worldwide.

• Question about HP Slate 7 more 1301 (internal memory and USB)

  Hi all.

  I plan to buy a HP Slate 7 more 1301 soon, however one thing confuses me.

  On one of the user guides I've read online, for this, he says:

  "A micro SD card must be installed before you can transfer files between your Tablet and the computer."

  Now, I've read that for many tablets, 'internal memory' can be used only for applications and others, but not for data.

  So, how does this Tablet? Would I be able to access the internal memory it comes with (the 8GB Nand flash player) and transfer files to it? Or do I have to get a microSD card to add data storage capabilities to the Tablet?

  In the case, I can't use the internal memory to store data via the USB connection, I can at least transfer data to it with another method? As methods based on a cloud, or WiFi apps?

  In my view, that it runs Android 4.2.

  Thank you, any help is appreciated.

  Hi Bremsstrahlung,

  This user's guide have you seen that in, could you put a link? On tablets (especially those without a Manager installed files, or 4.4/KitKat tablets) you would need a computer in order to transfer files between the Tablet internal storage and microSD card, but I have not heard any model for Tablet from HP that require a microSD card to transfer files between a computer and the tablet. All of HP's tablets have a standard micro-USB port with a USB data cable you can connect your computer and access the files stored on your tablet (regardless of the fact that it is equipped with a memory card).

  You can certainly use the Tablet for data memory. Expandable storage (microSD card) is completely optional.

• General questions about the system reserve partition in windows 7 and 8

  Hello

  1. is the partition of the system 100 MB in windows 7 hard disk is to use system restore?

  2 - on the track of the first hard disk that 100 MB partition holds system resides?

  3. in windows 8 wat happened with this partition of booking sytem 100 MB and where it is located on the hard drive?

  Thank you

  Johan

  Hello

  1. is the partition of the system 100 MB in windows 7 hard disk is to use system restore?

  2 - on the track of the first hard disk that 100 MB partition holds system resides?

  3. in windows 8 wat happened with this partition of booking sytem 100 MB and where it is located on the hard drive?

  Thank you

  Johan

  It should appear as disk 0

  This is for the Windows recovery environment (WinRE), also supplied with Windows Vista, only it has been available from the Windows Vista installation disc only, although some manufacturers make available on a partition separated on their factory facilities. In Windows 7, this feature is installed on all computers and is stored in the 200 MB partition if you are installing using a single partition scheme. However, if you are installing to a drive that has more than one partition, the recovery environment is stored in a folder at the root of your installation disc, so if you install to a partition with a label of C:\ she will be C:\Recovery.

• Question about the difference between the only creative cloud and complete sets / Photoshop

  I am an Adobe Photoshop / CS / CC novice, so I apologize in advance however stupid it may meet.  If I buy Photoshop via the package "single application" will I get to use Creative due to its full potential (masking, layers, sharpness, etc) or should I buy the package "complete individual" which is more expensive?

  I have no requirement for Adobe products beyond photo editing and I'm not familiar with other applications / products listed.

  Thank you

  If you subscribe simply Photoshop CC, you get the full application (aka, masking, layers, sharpening) as well as the 20 GB of online storage. You will not get one of the other applications like Lightroom or good Illustrator. You get only Photoshop.

• A few questions about FileConnection/JSR 75

  [I posted these issues some time ago, but got no response]

  I am writing an application that targets the 4.2.1 and upward. After reading everything I can find (api docs, forum, kb, guides, web search), I still have many questions about the BlackBerry file system:

  1. Are store / and SDCard / internal name of the memory and the SD card root on all BlackBerry devices?
  2. JSR 75 leaves open the question of whether an application sees the virtual roots that are private to itself or if all applications share the same roots. How does on BBs? I have seen many examples where the path name starts by "/ store/home/user/app_name /" or "/ SDCard/BlackBerry/app_name / '. Is this necessary, or can my request simply use "/ store /" or "/SDCard/" and add the file name? If the former, are there best practices documented anywhere to manage collisions between app names?
  3. If the files are visible in many applications, there are layers of security available to protect data (I think something similar to how a PersistentObject can be encapsulated in an object ControlledAccess using the PersistentStore) or do make us our own?
  4. I read on this forum somewhere that store / is not available when a device is connected via USB and mass storage is active. Is this and other information like this documented somewhere?
  5. May restrict the COMPUTER strategies how an application uses FileConnection, particularly to the store / and SDCard /? If so, is there any guidance on common restrictions that developers should know when you write applications for general use?
  6. What restrictions are there on the names of files (allowed characters, length, etc.)?

  Any guidance or pointers will be appreciated!

  Hi Ted,

  I'm not sure on your remaining questions, but I'll try to answer as best I can:

  1. did not have different names on the devices until today.

  2. you have no problem on SD card and you are allowed to save files anywhere it. Not quite sure

  shop around, but you should be able to save files on the file system visible and own created folders. There will be

  some folders inaccessible devices that require internal processing (installed Te of applications etc..).

  3. you can open files as readonly etc. but elsethere it is not the layers of security installed. If you have data

  issues of security, you must save this Te using the RuntimeStore class!

  4. I don't know, but it's a fact. But for this purpose, you can detect the toggling of mass storage

  programmatically.

  5 see point No. 3

  6 see restrictions as specified in JSR 75.

  Kind regards

  Jochen

• Questions about the implementation of clusters of storage and DTS on active cluster

  I have a few questions about the implementation of clusters of data store and SRS storage in VSphere 5.1.

  We have a data center with about 15 HP blades and a few servers non-lame.  The hosts are all either VSphere 5.0 or 5.1.  Our back-end storage is an EMC VNX 5700 with about 20 stores of data.  All the VMWare is managed by VCenter 5.1 running on a dedicated physical machine.

  Currently, each data store is used individually; No piles of data store are put in place.  When a new virtual machine is created, the administrator usually chooses the data with the most space store.  Periodically, we will go back and manually storage vMotion machines to balance the load.

  Recently, we have expanded the VNX storage, so we now have LUNS in different pools, with different levels of performance.

  What I would do is set up for the data store clusters, so that us when a virtual machine is created, the administrator must not know what data store is in which pool.  Also take advantage of the DRS storage so that the burden of storage will be "refine" himself a little.

  I know the setting up of a cluster of storage in a 'clean' environment is quite simple, but my concern is creation/conversion data warehouses existing in active production in the cluster, while they are used.

  If I access the screen "data warehouses and store data from clusters ', right-click on the data center and create a cluster, and then move the various data stores in the new cluster, will there be an interruption in the production running systems?

  I also wonder about activation of storage i/o control.  It is not currently enabled on data warehouses.  I know it's useful for the StorageDRS, but will be allowing any negative impact on the system?  If I turn on the warehouses of data, is there anything else I should do or set in addition to all that allows him?

  Finally, we are in the process of Site Recovery Manager configuration.  SRS has an impact on the configuration of the data clusters and DTS store?

  Thanks in advance for your comments.

  Mike O.

  Gregg Robertson wrote:

  Hello

  Clusters of data and using DTS store doesn't impact RS even if you create a cluster of data store for storage of replicated data and another for everyone else, this way you machines virtual you want to replicate are not moved on warehouses of data that are not replicated , but will still have the ability to move if there is a conflict.

  Gregg

  With all due respect but SRM and DTS don't go together. SRM does not at all support the use of DTS. So if you are configuring SRM forget DTS for now.

  Reason for this is that SRM knows no DTS and VMs can be in flight when a failover should occur, and bad things can happen. Also, the protection breaks when a virtual computer is moved between data warehouses in a cluster data store.

  In short: don't go there.

• Where should questions about the JDEV/ADF positions?

  Hello

  Where should questions about the JDEV/ADF positions?

  JDeveloper and ADF or

  JDeveloper and ADF?

  I found there may be some different advantageous:

  https://forums.Oracle.com/message/11109674?TSTART=0#11109674

  Thank you.

  Well, the other forum you mentioned is the Korean equivalent of the English forum.

  You have already discovered, it is not controlled to many users. I didn't know that it exists at all.

  In general it is to you where you ask your questions. All for one here are driven by the community and some employees of the Oracle, you cannot wait has answered all your questions. If you really need to answer you go through paid support.

  A tip for getting help is to provide a well-defined use cases, information relating to your environment and documented code showing what you have already tried.

  Timo

• A question about RMAN on 11.2

  Hello everyone
  
  Do to restore a database from 11.1 to 11.2 with RMAN?
  
  Thank you very much.

  Hello;

  Yes you can. However, there are big limits because you must always perform an upgrade. Generally not a good idea.

  Source:

  Frequently asked Questions about the restoration or duplication between different Versions and platforms [ID 369644.1]

  Additional information:

  NOTE: 560417.1 - restore via update returns ORA-1092 on open

  Best regards

  mseberg