Question about master pages

Similar Questions

• Question of master page frames & text

  Hello, all. Question on master pages and blocks of text, if you don't mind.

  I was told that I didn't draw a text frame on the master page, the margins are going to be the same size as my block of text. OK, hooray, set up the master page without a framework text (and according to a number of additional templates out of this).

  It turns out that I had to change the margins later, after the original text, I have had paid. The text block in the pages that have not changed, and I had to resize them all by hand on the individual pages... I couldn't do it on the master page.

  What I did wrong, and how can I avoid this in the future? Part, of course, do not change margins after pouring text. Heh.

  All my best,

  Chryss

  You have to turn on the adjustment of the layout in the menu layout, before you make a change like that. Blocks of text that align with margin guides will resize with the guides (and of course, this will change the text of an image to the image stream).

• Questions find master page on my project of Indesign.

  I use the demo version of CC 2014.2 to create my first paper. After starting it the week last (with full access to a master page), all of a sudden, the master page option went when I pull the document upward. Is it because I'm on a trial version of Indesign? Or am I missing an obvious way to back up the master page for my document back again?

  Nothing magical about this topic. Look under the window menu.

• Question of Master Pages

  I'm wearing a book (first time).  I have master pages.  Master A for normal pages, for the title of chapter I Master B, which is a two pages with a quote on the left page and a nice chapter title page on the right.  These have the text in the text boxes.  Example of

  C H A P T E R O N E (centered, with the lines above and below - this change with each chapter above)

  (a chart that never changes)

  1 (digital chapter - large fonts - change with each chapter)

  Chapter title (this changes each chapter

  From the text (pretty drop tank and text then normal)

  The problem is that when I start a new chapter, I insert a few pages, take two of them and play Master B. This makes them identical to the Master B, with text and all of that.  I need to substitute it.  I figured out how to make on Chapter 1 and 2. In Chapter 3 I now find myself in trouble again. It seems that there are places where I always struggle against InDesign to be able to edit the text.

  Any advice? What is the best way to proceed that works like a charm every time?

  If they are behind something, it will be impossible to replace them unless you click on an area that is exposed. Another possibility is that they are on a locked layer.

• Hide questions about landing page

  Let's say - I have 3 questions placed on the form, which is of type Radio buttons. When you select the 1st question 'yes' – then two questions should not appear on the destination page and vice versa.

  I guess it must be coded on the landing page.

  Can someone guide me how it should be written.

  Thank you for your help in advance.

  Thank you
  Srini

  Using Javascript... See a full working example below. More internet research as needed.

  What price are your apples?
  

  Our apples are 30 pence each. If you buy 10 or more, we can sell them at a reduced rate in bulk from 25 pence each.

  This should help.

  Thank you

  Amit

• question about php pages

  I use Dreamweaver 8 and Windows XP.
  
  My goal is to get away using models.
  
  I started with an html document, using the CSS formatting.
  Then, I went and learned serverside includes (php) for my navigation and footer. (Who knew it was so easy?)
  
  At the same time, I learned that the page including the ISS cannot be html, I did a "save under" for php. As soon as I did it, Dreamweaver displays is more CSS formatting - shows none of the issuance of divs, and none of the content in Dreamweaver EXCEPT for the text of the menu, which is at the ISS. When I download the file, it displays in IE and Firefox very well - http://nned.uua.org/test.php. The CSS is nned.uua.org/nned.css
  
  What should I do to be able to change in Design view in Dreamweaver? Or am I condemned to having to change code view?

  : blush:
  Yes, this file was some disorder, wasn't she? body tags? They're over-rated anyway. There is a certain risk to copy and paste from other projects - copy too, do not copy enough... And middle-aged people should not try to do something after 22:00.

  Thanks for all the help, in particular to understand the demands of the ISS. I disassembled the include files and cleaned up the html code in the homepage (a doctype!). That seems to have done the trick.

• On the Master Page of the page style to add changes

  Hello

  I have a question about adding Page Mater in my list of topics, styles of change topic (page)

  I followed ongoing measures are here:

  1: create a project by importing a word doc.

  2: set the Master Page by file > new > Master Page.

  3, select all or a topic in the list of topics > right click > select Properties, and then add the master page

  Do more high style of the steps in the topic in which I added some changes of master page

  Please help

  Thank you

  Hello

  It would seem that the Master Page has an associated Style sheet (CSS file) that differs from the first page you associate with that.

  Fortunately, this is a fairly simple process to re - associate a style sheet given with one or more subjects. Just open the pod of the list of subjects, select all, right click and choose Properties. Click on the appearance tab, and then choose the CSS file.

  You can also change your Master Page so that it references the CSS file. In this way, when you associate it with the subjects, it should carry along the desired reference of the Style sheet.

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7, 8 or 9 in the day! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• Question about InDesign: master page items I delete will not be missing.

  I'm working on bringing a book, with chapters that are separate files. Of course, there are a master page with various guides that I use a lot, as well as a header running pretty standard with the names section and chapter and page numbers. As is standard practice, I would like to appear on almost all the pages, but not on the front pages of the chapters. (There are other times I might want to replace it, but that is the main). So, I Ctrl-Shift-click, then delete them when I put in place a new chapter.

  Problem is that they are not missing. Every so often, I open a previous chapter and find that these items are back on the first page of this chapter, and I remove them again. I only noticed this since I did the chapters in question in a book file so that I can keep an eye on my pages and synchronize styles more easily.

  My best guess is that maybe it has something to do with the aforementioned synchronization. I don't want these chapters to share the same master pages, but don't want to keep IDto re-application of the elements of their share to the individual pages that I have already manually the deleted since (sometimes more than once). How can I stop this from happening? (Or otherwise, if it is not the cause of the problem, what else could be and how to deal with that?)

  Create a different master page based on your primary master page for these pages. Do not make substitutions on the pages of work.

• Hello Mr President! I have a few questions about the Word report generation please.1.How can I add a border to a page in word? 2. How can I add gridlines to a table generated related word?. Can 3. how I add a border to a picture of the Word report?. Thank

  Hello!

  Sir, I have a few questions about generating word reports using (C language in labwindows) please.

  1. How can I add a border to a page in word?

  2. How do I add border lines and grid to a table generated in Word report (not "cvi control table"inserted from gui, I wonder about the table generated in Word report)?

  3. How can I fill a table cell of report word with the data type other than 'character '.

  And sir a question on the use of the timer in labwindows cvi please.

  Sir, I'm trying to set a time minimum interval timer to 1millisecond (0.001 s), that I have set, timer cares about the interval set by me he only meets the minimum default time interval which is, I think as 10milliseconds (I'm using windows xp service Pack 3 version 2002).

  Concerning

  Imran

  Pakistan

  Have you read this statement ? It explains how to set the registry value:

  If the REG_SZ useDefaultTimer does not already exist, you must create it under HKEY_LOCAL_MACHINE\SOFTWARE\National Instruments\CVI Run-Time Engine\cvirte. "" This can be done navigate to the appropriate folder, and then click Edit "New" string value. Then, click on means the name of the new value created, select Rename, and then specify useDefaultTimer as the name. Finally, double click on the name and specify the value True or False.

• Master Page Items question: I use master pages for a 60 page document and just found out that some of my master page items are multiplying! There are some boundaries on the pages and some of them are constantly a quantity apparently endless on top of e

  Master Page Items question: I use master pages for a 60 page document and just found out that some of my master page items are multiplying! There are some boundaries on the pages, and some of them are constantly a quantity apparently without end on top of the other. For example, I replace to change the color of the border and notice a black there's below him so I deleted the extra and there is another and another and another... EEK. I can easily hide them, BUT I fear they will lead to complications in the case of pre-press printing. What is the cause? What can I do to prevent it? How can I get rid of the stack-up?

  It's always haapening, if you substitute any element on the page and later master you reapply the same or another master. I would NEVER say to replace any itme master page in the page. Instead create another master based on the first, make the substitutions and apply this master. Substitutions on the pages should be avoided in all cases, not only for the problem you described above, other issues of accessibility will also come into play.

• Beast Master Page question

  Although I've been using Framemaker since 1992 (Unix) and progressed to fly from unix to windows, macintosh and return to windows.  I currently use Framemaker 9 on Windows XP and I still feel like a newbie sometimes. The question was which is rampant in me for years and some I think that the answer might be accomany a Duh answer? quickly followed by a head slap

  Is it possible to include pages in true landscape mode in a single framework document?  By true landscape I do not mean a block of text rotated on a portrait page. To create a book my perceived solution (two diferent framemaker files {a landscape and a portrait]) may be confused when creating a 100 page document where 25 or more are pages in landscape mode and generally they are not consecutive. One of my latest projects required a book with 52 individual photos. (In Word (sorry for the curse on the forum), the project has a single file.)

  Any help would be appreciated and I promise no Homer SImpsom response will be provided

  Look in the help file online something like "assignment of master pages to the pages of body containing paragraph tags.

  But the basics are:

  1. Create a master page to landscape.
  2. Create a single paragraph tag you will use to call the master page. Generally, this should be some position, but can be anything.
  3. Map the tag of paragraph to the master page by using the Mapping Table in the reference of the document page.

  I found, in general, it works very well for situations where you really don't have a landscape between the portrait pages page. It becomes clumsy fairly quickly if you need to put in place a series of pages in landscape mode. If you need to do this, I set up a separate document to landscape and then import it into the parent file as an insert text - make sure to preserve the landscape on the importation of setting preferences sheet shaped. Or go to the other approach, you mentioned - page groups of each type, implemented as component files in a book, set up to resemble a single chapter.

  Art

• Newbie question: select a region on a master page?

  Hello

  I need to select and delete the images of footer of a master page (actually a gap of two pages) and want to learn so if someone could tell me a command or commands I can try to understand to use it. Basically a specific MARQUEE select the bottom eighth page or so - I searched with each quarter I can think, but what I found seems to take care of something else more involved.

  Thank you

  Gary

  I wrote a sample script for you to play with:

  doc = app.activeDocument;
  pageHeight = doc.documentPreferences.pageHeight;
  page = doc.pages[0];
  pageItems = page.pageItems;
  bottomPortion = pageHeight / 8 * 7;
  bottomItems = [];
  for(c=0;c bottomPortion){
          bottomItems.push(pageItems[c])
      }
  }app.selection = bottomItems;
  

  This script will select any element with a lower edge that extends beyond the low 8th front page.

• Question of the Master Page Architecture

  New site needs a main page of the company, which then directs the customer to choose one of the two store restaurant locations which each will have its own pages with its options, somewhat different from the other chain store location.  What architecture will better serve this kind of situation?

  The name of your master pages are not relevant. Only, you see these names. You will need to set the page name in the page properties.

  I don't know what you mean by levels? On the plan view? If so, I would have probably a three-page senior level (hand, store 1 and 2 to store) and then direction from there. But it's really hard to say without knowing how many pages you have etc.

• Question page vs Master Page

  Is it possible to insert different information in different pages, for an empty text boxes, applied to a Master Page? If so, how? Or each specified page just needs to be a double Master Page of its own?

  Any idea is appreciated.

  I think that we must learn the concept of pages, masters and layers.

  On a master, you will need to place objects that repeat on every page, but not any type of content. On the mask belongs to a block of text with the page number marker, life headers, section marker, background, all on different layers.

  Only if you have created a primary text blocks they should be on the master are other placeholder not suppoesed to be on the master.

  On the page is all that is part of the content.

• Back and front master page of questions when drag/reorganization of pages - photo, CS6

  I have a novel/book exceeds everything that a document (as opposed to ID book) and I used the existing templates and styles of a previous book.

  When a chapter ends on a page (on the back) left side of the spread, I want to start the opener next chapter on the right side (front) very next propagation.  When a chapter ends on a straight line (front), then I want the opener of the next chapter to start on the next spead on the side left (back).  I mainly use a page of mater (2 pages) for the first chapter game and a master spread 2 separate page for content pages.  I'm trying to achieve a layout of book/novel with none of the white pages.

  I tried to create master pages 1 page and application to "undo" spreads, but that seems not worked either.  I 'allow pages from one document to shuffle' unchecked.

  On the attached page, I tried to delete the blank page (master set to 'none'), but when I do, it just creates another page in its place.  When I try to drag and drop the opener of the next chapter to the right of the last chapter ending, it adds a blank page in front of it or removes one of the content pages.  The "son" of text are perhaps the cause of issues?  Any ideas?  Really hope there is a solution that does not start.

  I would be grateful for the advice!

  Thank you

  Kai

  

  Of course, simply change the document face to the non-connected format to, and all pages will use half left of the master spread.

  He may be little cleaning if you have asymmetrical margins or prevail on all main objects.