Question about MTP/MSC modes

Similar Questions

• Two questions about the ARCHIVELOG mode allowing

  Version: 10 gr 2
  
  Currently my DB is not in ARCHIVELOG mode. So that's what I'll do to activate it.
  
  
  Question1.
  
  Are the following steps to activate archiving right?
  
  
  
  Immediate Step1.shutdown;
  
  Step 2. bootable media;
  
  Step3 system. Alter set LOG_ARCHIVE_FORMAT = arch_%t_%s_%r.arc scope = both;
  
  Step 4. ALTER system set log_archive_dest = < archive_path > scope = both;
  
  Step5.alter database archivelog;
  
  Step6.alter database open;
  
  
  
  
  Question2.
  
  
  Oracle doc: http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/archredo.htm#i1006246
  discussions on the definition of LOG_ARCHIVE_DEST. I do not understand the keyword LOCATION shown below.
  

  LOG_ARCHIVE_DEST_1 = 'LOCATION = /disk1/archive'

  About the LOCATION of keyword, the documentation says

  The LOCATION keyword specifies an operating system specific path name

  Cannot give us just a destination filesystem as/u04/arch_logs without the keyword RENTAL. What is the advantage in specifying the keyword LOCATION?

  The keyword LOCATION allows us to specify the destination for the archived redo log files local. If you use LOG_ARCHIVE_DEST_1(1-10) you keyword LOCATION State (when you want to redo in the local server log files)
  If you use the LOG_ARCHIVE_DEST parameter, you can omit the keyword LOCATION. See the following example:

  SQL> alter system set log_archive_dest_1='c:\';
  alter system set log_archive_dest_1='c:\'
  *
  ERROR at line 1:
  ORA-32017: failure in updating SPFILE
  ORA-16179: incremental changes to "log_archive_dest_1" not allowed with SPFILE
  
  SQL> alter system set log_archive_dest_1='location=c:\';
  
  System altered.
  
  SQL> alter system set log_archive_dest='c:\' scope=spfile;
  
  System altered.
  
  SQL> alter system set log_archive_dest=' location c:\' scope=spfile;
  
  System altered.
  
  SQL>
  

• Question about Broadcast Messaging mode UMR

  HI -.

  If we allow a subscriber to access the administration of system of dissemination of the entry of the appellant on his own salvation in the conversation of the unit, he will be able to access the admin of broadcasting when we are in mode UMR? I know that conversations are different. We want to be able to send a message to broadcast to subscribers of unity when it comes to a shoulder of Exchange - containment or power failure that is virus. If this option is not available in HOME mode so I need to implement different, for example, with another call point routing Manager/CTI.

  Thank you very much!

  Ginger

  You can send/receive/manage broadcast messages WHEN the system is in the mode of the UMR. Of course, if the unit can not reach the mail store, it won't deliver messages broadcast to remote servers.

• Question about the Maintenance Mode

  Hello
  
  Is there a way to customize the maintenance mode message that opens in the workspace when user tries to access the planning application is maintenance mode?
  
  Currently, this is the message that is displayed:
  
  An error occurred while processing this page. See the log for more details. If please close the current tab and open the application again. Application is in maintenance mode. New connections are not allowed.
  
  Please let me know if there is a way to personalize this message.
  
  
  Thank you
  ~ Krrish
  
  Published by: Krrish on January 21, 2013 11:59

  I only did this, but it seems easy enough. Have a look here: http://docs.oracle.com/cd/E17236_01/epm.1112/hp_admin_11122/ch13s05s01.html

  You will update the HspCustomMsgs_en file.

  Hope this helps,
  -Jake

• Questions about an average of response spectrum and frequency of feeding mode.

  Hello

  I have a few questions about an average of mode. When I generate a sinusoidal signal from one output to two input channels channel to see if my DAQ card works well and vector averaged in the power spectrum for DFT, the amplitudes was different from the previous one of the amplitude, which was supposed to be 1 v peak. They range from 0.5 v to 0.6 v peak. When the calculation of the average model is RMS, the amplitudes were close to 1. I wonder what are the fomulas of RMS and average vector. Does that mean that I could not accurate if I use an average of vector? In a time of frequency response, why I coherences of difference and the amplitudes using the vector and the mean quadratic value?

  Thank you

  Ningyu

  rico1985,

  The differences in modes of generation are as they sound: 1 sample output only a sample writing, N samples will be released however many samples configure you for each entry, and the continuous samples released samples continuously until a specified user action happens (you press the stop button or a logic that you created gets fulfulled). The range of Signal output allows you to set a ceiling high and low level of your output signal and it only affects the quality keeping in this beach. Timing to set a deadline for the time between the acquisition of the sample. If a new sample becomes unavailable before the timeout setting, you will get an error. This is useful for looking at a network, because if the network goes down and you stop getting data from a machine and then you would like to know about it. I point you to those videos that are short tutorials on how to make the most of these actions in SignalExpress.The SignalExpress 3.0 Help file is also your first point of contact for all your questions on getting started. These two resources should get you up and running in SignalExpress in no time. (either by the way all your questions answered using these resources) Bravo!

• Instructions on how to change a Sansa Express mode MTP to MSC mode

  Here's a PDF detailed instructions with screenshots on how to change a Sansa Express mode MTP to MSC mode.

  Instructions for the mode MTP Sansa Express in MSC mode

  Yet once again, if you feel compelled to start a pointless discussion on a distiction without difference, pull yourself.

  L'Express is a device MTP, the method ONLY works to 'convert' MSC are in the instructions.

  The instructions actually work, which was the point of being with.

  That's what these forums are for.

  But you're too busy from a contest of wee in fact pointed out that the highlight.

  What was the point of your original response message once again?

  Oh yes, it's true.

  It served no useful purpose at all and is used to tell us all that water is wet and rocks are difficult.

  Feel free to come back to the breeding of cats now.

• Fuze MSC mode strange question

  I bought my girlfriend a rocket of Black 4 GB a month ago, but we still had a problem. When in mass storage Mode, you can not see all files, folders appear empty. I asumed it was some protection against copying or the bug, but updated to the new firmware didn't help.

  A week ago I had a second rocket of Black 4 GB as a prize in a contest.  This is a v2, where my girlfriends is a V1. the two are running the latest firmware. When I put the V2 in mass storage mode, I can see all the files in the folders, and my home stereo USB connection can also now see my music. I also tested on my car stereo-enabled USB kenwood and the V2 works fine there too.

  I loaded the music in the same exact way (used WMP11), so is there a problem with the V1 rocket that MSC mode does not work properly?

  Any input would be apreciated.

  Files is visible only when it is connected in the mode in which they were added.  In other words, files added in MTP/Auto will be not visible when connected through MSC and vice versa.  The player will be always all the files added in two modes, but this content management becomes very difficult.   It is better to simply pick a mode and stick with it (do not use Auto, choose one of the specific modes).

  If you want MSC (good choice), you can format the drive in the settings menu, go to MSC and reload all of your files.

• Questions about maintenance mode

  I have some curious (probably dumb) questions on the service mode (esxi worm 51).

  • What is exactly?
  • What happens if you run the patch similar to ' esxcli software vib /vmfs/volumes/datastore/patch_zipfile.zip d install "without putting it in maintenance mode?
  • What happens if you put maintainece mode, install the patch, and then out of maintenance mode before restart? The reason behind this is so that the virtual machines will autostart.

  These are just curious of rhetorical questions.

  Thank you!

  Arch

  All the maintenance mode has really is sure no VMs are running. In an environment of DRS, VM will migrate automatically away, basically saying maintenance mode "do not put a machine virtual here, is about to have some work." Without the DRS maintenance mode will fail and advise you to move the virtual machines yourself.

  Some patches require no maintenance mode and install fine. Those who demand the it will error and refused to apply without maintenance mode.

  In the third scenario, the machines will be autostart

• Playlists and MSC mode

  I know there has been much discussion already MSC vs MTP, but I still have to ask a question.

  I've heard about how you can create playlists by drag-and - drop, in MSC mode... but what this means and can I do it?

  My playlists keep coming... really annoying voids, so any help is appreciated!

  The only MSC, drag and drop solution I use Winamp.  Drag the files to the "rocket" in the Winamp playlist editor, organized as you like, then save the playlist directly on the record of MUSIC of the rocket.

• advantages and disadvantages of the use of PSG vs msc mode?

  I tried to find that answering this question somewhere else, but so far without success.  I recently got a Sansa fuse and this is the first time that I had to worry about the MSC vs MTP modes.

  With all the debates of the MTP and MSC are and how to change the mode that it's in, what operating support systems what mode, etc etc etc...

  I have not found anything specific to the Sansa fuse which tells me what mode is 'better' to use when I have a choice.  I know "better" is relative, but what are the advantages and disadvantages of each mode?  So far the only annoying I found on DPW is that you cannot use the option 'remove hardware safely' on most of the Windows OS, and that makes me a little nervous.  But it looks like one big annoying thing on MSC seems to be (?) that you can't always see what's on your drive when you are in Windows Explorer.

  Any other pro and con on how choose (assuming you are using an operating system where you have a choice).

  Thank you!

  Use MSC unless you have a subscription (Rhapsody, Napster, Overdrive) service which must transfer the information of DRM (digital rights misery), which only works with PSG.

• Question about storage SD card

  I'm trying to decide between the 4 and 8 GB Sansa Clip +.

  I think 8 GB is all I'd need but I already have a microSD card and 4 GB Sansa is cheaper.

  I don't know how the SD memory card is handled.

  When an SD card is installed is considered a separate folder or is all managed as if it were a storage space during music playback?

  Is the internal storage device on the SD card with respect to the use of speed and battery?

  When copying music do I need to worry if it does not have internal or SD card, or this is handled automatically?

  Thank you.

  The Sansa will read while internal and microSD memory together for the Album, artist, etc.. He built a database - index - in tags, electronic tags in files.

  If you put the device in MSC mode, I recommend, it looks like the card slot and the internal memory as two separate if drives you to post the computer. So it's your choice, where the music is going. But no matter the device once it's inside.

  I don't know how different internal and microSD are for use of the battery - probably very lttle - but the speed is the same.

  Settings system/settings/USB Mode. MSC is a simple way, as have two flash memory drives internal (4 GB or 8 GB) and the map. MTP allows you to do things through Windows Media Player, which makes the camera a virtual device blah blah blah... not worth it unless you use library books in need of PSG to their codes to unlock hidden.

  Change Meteorological Service of Canada, rather than auto-detection, or you will probably get Auto shunted by DPW. The idea was to make Windows Media Player/Sansa operate like iTunes/iPod, but it is not as simple as that.  If you think about it, Apple software and hardware control, so iTunes must only work with a relative handful of gadgets. Windows, however, is on all kinds of material with all kinds of oddities, Windows Media Player is something messier trying to cope with them all.

  If you are really attached to the old ways, the unit also has a setting (under music) folders allows you to separately observe internal and card slot as if they were separated, but you don't have to.

  It IS more complicated to make playlists that bounce between the internal storage and card connector, but it can be done.

  I keep all my music on a 32 GB card and zero on in-house. If I were you, I would get the cheaper and do that. Then if the internal memory is never wrong, you can just switch all your music into the next unit by popping the microSD card. I think that you can now even use as card 64 GB if your format it in FAT32.

  I just bought a 64 GB SanDisk Ultra for $28 for sale at B & H. These sales continue to flow, memory continues to become less expensive. What you really need is a microSD reader, and the Clip + is good at that.

  Get the 4 GB, the value Settings/System Settings/USB Mode MSC, put everything on the map, have fun.

• Using (Playlists) SD Card in MSC Mode

  Hello;

  In MSC Mode, Clip + and another removable drive to the SD card, as separate drives.  So if I were on a SD card, how would create playlists (m3u) which contain music of these two drives?  When connected to a computer, it is available drive letters; When it is not the case, however, there is no drive letters.  Therefore, I don't see how it can be "seemless" as someone mentioned.  I would use the MTP Mode, but I prefer not to as it is not flexible.

  Any thoughts?

  In fact, you have a few questions here that need some explanation:

  1. Playlists m3u will be read & play songs of either of the reader memory internal or card SD, but not both. PLA format playlists is going play songs from two sources of memory. Personally, I use Winamp and MSC mode to create playlists .m3u. Then, I use a conversion program to convert the .m3u playlist a .pla one. This works. There are other means. I tell you, just the way that works for me.
  2. Reading 'Transparent', as has been mentioned here refers to the Clip + (or any player with a slot for SD card Sansa) and the fact that the player creates a database containing the songs of two memory locations using the information in the ID3 tags embedded in the files of the song and when 'Play All' (with or without the shuffle) is selected , will play files regardless of the location of the memory. Playlists are a different story (as explained in #1). The only difference is that if you use the folder view (in the menu music).
  3. MSC mode will allow your computer to see your player that separate the 2 discs, the internal memory and the card slot (if a card is inserted in time or not). Your computer sees your device in MTP mode as a single device requiring 'management' and does not assign a drive letter. You can still access two internal & external memories, but it is a "virtual". Also note that your computer can only see the songs in 1 mode at a time, so it is best to figure out which is best for you depending on how you plan to use the drive and all that transfer you the content in this mode 1.

  I am with you and a guy MSC through & through. PSG has its purposes (content DRM such as Rhapsody, etc.) and the fans, but MSC you gives the user much more control and is easier all around.

• Questions about Satellite P10 554

  Hello

  I have 2 questions about my P10-554. I read on this forum but can't find anything that helps out me.

  First of all:
  When I try to turn the unit off after working, using even the closing of xp function or the power button, windows normally quit, but when it needs to turn off just reboot again. If I repeat the closing down directly after this restart, normally it turns off.
  This problem occur only when I use the power supply in battery mode.
  I can't say that to me...

  Second:
  I have a mini PCI Wlan card for my unit, works very well, but I wonder if it is possible to get the Wlan switch switch work whith it? Or is it only possible whith some special maps? It is not so important, but it would be nice to know if there is a trick or something to get the switch used.

  Best regards
  Gabbagandalf

  Hello

  Regarding your first question;
  I'm a bit confused of m are sure you n t use the restart option?
  I never noticed anything like that on my laptop

  Usually, if I use the Shut down option, I can choose between standby, hibernation, restart and shutdown. If I use the stop that the laptop turns off as it should.
  Maybe it's time to s for a reinstallation of the OS?

  On the second question.
  The switch on the left side for laptop was designed and developed to pass on the WLan card antenna.
  Usually, you should be able to use this switch and to toggle WLan card functionality

  Don t understand why it should not work?  :|

• Ask questions about the HP Pavilion 14-V041TX Bluetooth

  Hello, sry for asking questions about simple things.

  How to activate bluetooth for laptop HP Pavlion 14-V041TX?

  Or how to bluetooth to detect other bluetooth devices?

  coz already try to use my smartphone, but cannot detect any bluetooth device or laptop.

  for what I know, I already install the driver for bluetooth.

  Maybe there's another driver, that I'm missing?

  Thank you.

  SRY for my bad English.

  HI @Ton1_qrenz ,

  Welcome to the HP Forums!

  It's a great place to find answers.

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  No worries about your English.  I believe that I understand your question, and if not, you can specify if you must post back.

  I understand that you are unable to detect Bluetooth devices.

  Here is a document to help you with this company. There are links that it contains other documents that can also be of assistance.

  Understand and troubleshoot Bluetooth wireless technology (8.1 Windows, 8, 7, Vista, XP)

  If the problem persists, try the following steps.

  Step 1. Go to Device Manager
  Step 2. Right click on "Bluetooth device" you want
  Step 3. Select "update driver software... »
  Step 4. Choose "Browse my computer for driver software".
  Step 5. Choose "Let Me pick from a list of drivers for devices on my computer.
  Step 6. Select "Ports (COM & LPT)"
  Step 7. Select "Microsoft" to the list of "manufacturers".
  Step 8. Finally select "Standard series via a Bluetooth connection.

  If you are unable to connect to a Bluetooth device, try the following:

  Step 1. Search for 'Change device' in the start menu in Windows 8.
  Step 2. Click on where it says change device installation settings.
  Step 3. Select No, let me choose what to do option.
  Step 4. Check the automatically get the device app option
  Step 5. Click on save changes to save the settings that you select

  So, you can try this

  Step 1: Go to RUN (Windows Logo + R) and type "services.msc" and Enter
  Step 2: Now find 'Bluetooth Support Service' and double click it
  Step 3: Now click on the Log on tab and type "Local Service" without the quotes
  Step 4. Click on "account".
  Step 5: Now remove any authorization of passwords the password field blank
  Step 6: Below the upper left title should be a hyperlink 'Start' click

  You can also view tab management power and unchecked the box "Allow the computer to turn off this device to save power."

  If it is still not resolved, I suggest contacting HP support for further assistance.

  Please contact our technical support at the 800-474-6836. If you are outside the United States / Canada region, please click the link below to get help from your region number. Phone goes everywhere in the world

  Good luck!

• Sansa won't work in MSC mode at all

  My sansa worked perfectly before, it was rockboxed and loaded with music. Then one day I turned it on and it froze in the system menus of rockbox. I turned the sansa on and outside and he consistantly froze at the same point. I thought it was a problem of rockbox, so I used sansa patcher to uninstall bootloader. Who took care of my freezing problem but now using the original firmware it only sees half of my songs and I don't have a micro sd chip in there. The other problem is that when I put the sansa MSC mode and plug it into the brief of screen sansa bed connected, but then once I try to explore the sansa in windows Explorer, that it goes offline and the computer crashes until I unplug the sansa. I isolated it as a flaw in the sansa by trying on each usb port on three computers different and three different versions of windows (Vista Premium, Windows XP Pro, Vista Home Premium 64-bit). I tried to plug it on and off. Is there a way to fix this? Replace the recovery mode firmware help? The device of formatting would have an effect? MTP mode still works well but I would like to get rockbox works again and I doubt that I can solve the problem of database of it not finding my songs without MSC.

  I appreciate all help.

  It's quite strange. MSC is usually easy to use mode and PSG is the problem. I suspect that there is a bad file that was transferred to MSC mode (or while using Rockbox) and he's in trouble. But you can't really fix that one file without returning MSC. I also assume that you use Rockbox to read files as file names and that these files do not have the Sansa like ID3 tags. But any. It is now a mess.

  Formatting will delete all the files that you have added to the unit, so let's hope you have backups.

  First, try to update or replace the firmware in recovery mode. See if that stabilizes the connection of MSC. You can then run ChkDsk for a chance at a file of fixing problem.

  If not, get in shape via the recovery mode. Make an empty folder called sansa.fmt and drag it into 16 MB - FORMAT. Do not use explore to the Format 16 MB FORMAT - that would make things much, much worse.