Question about path of the tilt features

Similar Questions

• Questions about new HA in vsphere features 5

  Hello!

  I have a few questions about new ha features in vsphere 5

  I found, there is a master ha in the cluster that monitors other hosts and protected virtual machines through two type of heartbeats (network and data store) and move the VMS if necessary. If this host fails, an election is held and new master ha is determined by vcenter server.

  Ok! What happens if we install vCenter Server as a virtual machine inside the host who is the master ha in a cluster. If this host fails (something like a power cut) its agent goes too far and also the vcenter is destroyed. So, who's going to hold the election and introduce the new ha so that the old ha and vCenter are out of the game.

  I know that ha staff are not entirely dependent on vCenter and runs if the host taking vcenter is far (restart vms including vcenter or moved to another host on another) but I think this one is different because of the new role of master

  My next question is on the different types of events, which can arrive at the slave of the hosts and do their partitioned or isolation. I'll ask them later (once this question is answered

  Thanks to you all

  you mean master election (who needs to know the host object id in the cluster and the number of data warehouses connected and...) is performed by agents themselves? and he needs no intervention vcenter?

  No fix - no intervention from vCenter for an election of master.

  and another thing. When the host with vCenter machine on it and the role of chess master, how other officers find that the master is absent? is not the work of vcenter to notice and say to others when master does not work?

  Is not work of vCenter - is the work of the master and the process of hearbeating among the slaves.

  what I doubt is that: If slave hosts loose connectivity with the master, they think that they are faulty and should present themselves as isolated or partitioned and it is the duty of the vcenter to know when the captain does not work! can you please correct me here

  See above - is not vCenter work to determine which node is failed or isolated - it's the work of agents FDM.

  
  

  You should read the book of Duncan: http://www.amazon.com/dp/B005C1SARM/ref=as_li_tf_til?tag=yellowbricks-20&camp=0&creative=0&linkCode=as1&creativeASIN=B005C1SARM&adid=16Q69JRGDTX1DHPRKTQM
  

  
  

  It covers all this in depth.

• where to post a question about iTunes on the iPhone?

  I have a question about a problem with iTunes on the iPhone (iOS), but I do not see a 'Community' with this title (or anything close;  I have no idea what "iTunes U" means).

  For lack of a better idea, I just posted to the community "iTunes for Mac", but I don't think that's true.

  Please let me know where I should post to an iTunes on iPhone issue.  Thank you.

  It should probably be posted in the community Using iPhone Apple Support communities. I'll ask a host spend your question in iTunes for Mac, if it has not already been moved.

  EDIT: Just read your message, and I think it's probably better where it is (because you need help syncing your songs via iTunes on your Mac). He should be fine here, but if the moderators believe that he should be somewhere else, they will move for you.

• Question about ActionBar on the first screen of the application

  Hi, I have a question about the actionbar behavior in the first screen of the application

  index.htm pushes immediately main.htm with actionbar. ActionBar clicks and responds correctly until I have add overflow on some buttons.

  When I click on the button of overflow, the overflow is displayed at the bottom of the page, the top of the overflow is put in correspondence with the upper part of the actionbar so buttons actionbar overflowing content is not visible.

  I reproduce this problem with the sample application.

  This is expected behavior? Is there a way around it?

  I was able to reproduce the problem and have connected it

  https://github.com/BlackBerry/bbUI.js/issues/329

• Question about to browse the lines of a viewobject

  I want to iterate over the lines of a viewobject. So, I use the following code snippet to do:

          String amDef = "model.service.TestAM";
          String config = "TestAMLocal";
          ApplicationModule am = Configuration.createRootApplicationModule(amDef, config);
          ViewObject vo = am.findViewObject("EmployeesView1");
          RowSetIterator iterator = vo.createRowSetIterator(null);
          iterator.reset();
   while(iterator.hasNext())
          {
              Row currentRow = iterator.next();
    System.out.println("Value: " + currentRow.getAttribute(1));
          }        
          
   iterator.closeRowSetIterator();
   Configuration.releaseRootApplicationModule(am, true);
  

  Now, I had a question about this code snippet. He get all records from the table of data to the model layer, that is, to the application server? If so, what part of the code for this? vo.createRowSetIterator maybe?

  Your example of code appears that I wasn't there. The default iterator and one that you get by vo.createRowSetIterator are different.

  And do not forget to close the iterator, you created as you lose in other resources.

  Timo

• Question about backing up the Lenovo factory

  Hi, I have an E530, I have a question about the Lenovo factory back, I'm a little unsure of the difference between the bootable media and just backup data.

  Is the bootable media just the equivalent to a disk of windows 7?

  the option data backup all currently installed on your laptop?

  I tried with the two checked options the other day and I got to the point where he solicited for disc DVD - RW 6 so I cancelled because I didn't know how much in total he would do, would be nice if he told me so I could better prepare.

  Also, if I was ever to use the data disks, would you boot from the startup disk you did first then also boot from CD 1 of the data disks?

  Hi James,

  We create these disks to customers of all time.  In our case we have Win 7 Pro, pre-loaded.  Win 8 discs are already included with the device.

  The process of factory recovery disks will create a set of disks [the E530 in the USA, to 4 DVD - Yes it would be nice to know how much to advance] will allow you to restore your machine out of the box.  The first disc it creates is a boot disk - you start from this when you start the recovery process - that's all it is. No file data/images for the restore process.  Other disks contain image files needed for restoration.  This does not save the user data. It is a different process.

  Since you started & cancelled the process, I'm not sure that it will allow you to re - burning the discs.  Because of the MS license restrictions, you are allowed to burn discs once.  We got all the way on the last drive and had the process fail [we don't know why - maybe bad disc?] and we cannot redo records because he thinks that we have successfully created their.  So, we have to call Lenovo support and ask them to send us a set of disks in Windows 7.

  I hope this helps...

  Al

• Change of path of the editing feature

  It appears when you drag a segment of path, in PSCS6, that the Steering lines change direction. Interesting change. How to find the legacy feature?

  In the tool Options bar path select there is a checkbox to force way slippery which can be switched to make the behavior as pre - CS6.

• Question about mismanagement of the effects in the construction of sequence

  Hi all
  
  I read the BPEL 2.0 document and met a question about management failures and the normal flow of control in the < sequence > construction.
  
  For example, in the following code fragment:
  
  <>sequence
  < call...
  < catch faultName = gt; a.
  < / call >
  < receive... >
  < / sequence >
  
  If fault one is taken and processed by error handler, when the fault handling ends at will are receive > activity start or jumped?
  
  According to the document: < receive > will begin when < call > complements, but the 'complete' includes the 'ends in vain", (i.e. a fault is stuck inside the < call > and dealt with)?
  
  Hope you can help me and thank you very much.
  
  Published by: user8301699 on April 9, 2009 19:04

  Hello

  You have reason, 'full' includes the 'ends in vain", (i.e. a fault is taken inside the and treated).

  Hope this answers your Q.

  See you soon
  Rémy Pucha

• Question about graphics on the Satellite A200-1VO card memory

  Hello
  How do you assign more memory to the graphics card on laptop Satellite A200-1V0?
  Thank you

  Hello

  in your case it s not possible to change the size of graphics by yourself, memory as graphics memory in your machine is shared with main memory, so if you upgrade main memory and graphics memory should increase. But this question is governed by the chipset and the user has no influence on it.

  Welcome them

• Question about path locations

  A VI I work on stores a few commands in an .ini file and works a treat. I'll turn the VI in an application and have it accessible on a few PCs by copy the .exe and .ini on the PC or keep it on a USB key.

  What I would ideally like is to have the look of VI for the path in the same folder as the application is stored in. So if I copy the file on a desktop computer or a USB key, it wouldn't matter. What is the best way to do it?

  There is a function in the file IO-> palette of constant path called the Application directory.  When in the development environment, it returns the folder of the project file.  When in an application (exe), it returns the folder of the executable.  Use this function with the path to build to locate your ini file.

• QUESTION about to connect the calling WinsCard.dll drive

  could not get the list of player and connect the player successfully by call winscard.dll under C:\Windows\system32 folder in my local PC, but the other PC could do that.

  My PC environment: 2002 XP, SP3
  the version of winscard.ll is August 4, 2008

  Hi Yang Yu,

  1. Is the issue with the computer recognizes the card reader or the card reader can't read the card?
  2. What is you receive the exact error message?
  3. What is the number and the model of the card reader?

  Refer to the article below and try the steps mentioned, if you use Windows XP Professional x 64 edition.

  A universal serial bus smart card reader that is connected to a Windows Server 2003-based computer may not detect the smart card

  http://support.Microsoft.com/kb/919922

  Your question does contain all the required information necessary for us to help you. Please provide more relevant information to continue troubleshooting as a result.

  How to ask a question

  http://support.Microsoft.com/kb/555375

• Question about vMAC on the DLR LIF

  Hello

  Based on the design of NSX Guide: "every LIF has assigned an IP address, which represents the default IP for the logical segment L2 bridge, it connects to a vMAC address. The IP address is obviously unique by LIF, then that same VMAC is attributed to all LIF defined"

  This test in the HOL laboratories, I started a ping from 172.16.10.11-> 172.16.20.11.  I configured a mirror port with source such as app-sr-01 a (172.16.20.11) (not available on servers web/app HOL tcpdump!). Looking at the MAC addresses on the package 'in' GRE encapsulated packet (see below cliché) I have a few questions:

  1. whence the source MAC on the 00:50:56:f1:f7:a2 of ICMP request packets? What cli command would show this MAC address?

  2. If each LIF must have the same vMAC, "arp - a" output on the corresponding servers shows different MACs for 10.1 and 20.1 LIF.  Is this expected or a Nested lab thing or did I miss something?

  

  1 MAC SRC in the query is almost certainly a pMAC for the ESXi server where the web-sv-01 has. You should be able to see in "net-vdr - C-l" running on this host.

  2. "arp - a" output for your web-sv-01 a don't look right, you should see VMAC (02:50:56:56:44:52) for all DLR LIF. What version of NSX do you use?

• Question about consumption on the Satellite A660-10W

  My A660-10W (new) was wrong and Toshiba (Mafil in Israel) has changed the hard drive.
  Now the computer acts differently that before when I got it like new.

  For example; and my question is:
  1. After about 15 minutes, it automatically goes into sleep mode.
  I understand that the setting can be changed, however I would like to know if this happens when something is running?
  either I left the WD external BACK-UP running, but he fell asleep...
  2. the same thing will happen if Im watching a movie, for example?

  Thank you

  Laptop can't handle in different way. I guess you are using the recovery of images (Toshiba original Win7) and parameters are exactly the same as before.
  # Yes, you can change it. Simply enter the change plan settings for the power plan that you use, and where you can change the time when the laptop should go to mode "Eve". You can also disable using Pétion NEVER.
  # I can't say with certainty, but on my computer laptop doesn t go "standby mode", when I watch the movie. Test it. Set for 2 minutes and put on a movie.

• 3 questions about encryption on the Z5

  Hi, I have three questions to ask other Xperia users.

  If I decide to encrypt my phone (Z5):

  (1) what will be the star of the performance? It will be noticeable?

  (2) I know it is not compatible with the smart lock, but it will make it also impossible to unlock the phone by using the fingerprint reader, knowing that this feature uses a proprietary API in its current form of "Lollipop"? (Good thing Marshmallow natively supports it)

  (3) again, it will be possible to use and update my phone with Flashtool?

  Thank you

  Hey, I have improved my Z5P yesterday to 6.0 using flashtool, so I can help

  (1) not for me / I have no comparison

  (2) totally compatible. Fingerprints don't worked with LL, as well as with mm. Fingerprint req. a code pin or password then, no reason

  (3) totally, Yes. BUT: I have my sdcard BA. Well, and not have suffered in some way the cryptokey erased (something like that), so I had to restore a backup that I did the day before. The files are always there, they just cannot be opened. Memory as before interior work, without loss of data.

  Cheers.

• Question about commissioning of the E20s - CUCM and TMS

  If we now run software CUCM 8.6.2 and 4.1 E20.  I played with CUCM and TMS supply by and a few questions.

  It seems that there are some features that can be set via the TMS models that cannot be resolved via CUCM (MTU, custom, etc commands).  Is it possible to apply these settings through TMS while having the unit registered in CUCM?

  Essentially, I want my call recording platform CUCM and control, but want to keep the granularity that TMS offers in terms of commissioning etc..  I expect the same problems with C-series, etc.

  Am I right in saying that, in order to get the E20 to join CUCM, I need to define the external Manager to "CUCM", and thus eliminate any possibility of TMS to manage? Otherwise, what is I could have managed by TMS and then set the SIP of the E20 to point to CUCM via templates in TMS?

  Any tips on that?

  Hello

  Having both TMS and CUCM to manage endpoints is not a good idea (yet). TMS and CUCM will return to each of the other toes with unpredictable results.

  With TMS 13.2, I understand that you should be able to import the CUCM in TMS and then find all systems registered to it and import these into TMS, however in this case TMS plan only systems conferences and will manage them not active (you can see status of the call as well).  13.2 TMS is not yet released, so that's what I said must be in this version.

  So basically now if you use CUCM, use CUCM provisioning and don't use TMS.  We focus on interactions with systems registered with CUCM TMS and it will be more developed on this in the future.  I recommend you check out the TMS13.2 release notes released to see if it is mentioned.

  Thank you