Question about sound card on TECRA T9000.

Similar Questions

• Question about sound card on Satellite Pro L40

  Hello

  I use a program called Sibelius and recommended an ASIO compatible sound card.
  Can someone tell me if the sound in the satellite pro L40 series card is compatible ASIO?
  If not I can plug a card external sound which is compatible and if so how can I turn off the internal sound card.

  Thank you

  I really don't think not someone will be able to give you information about the ASIO compatibility, but I see no problem, that is if you want to use the external device. Card internal sound, you can disable it in Device Manager.

• Question about sound quality software

  Hey,.

  Is there any software that you can get it if you use mixer that is an external audio device connected via the headphone jack, minimizes your comments and interference? or would I better off buying a USB audio interface for external connection? or an external sound card?

  If so someone can recommend a?

  Maybe this forum is not the right place for this question. Try to collect this info on some forum with this theme. Maybe some forum where you can read about the use of sound devices external, DJ equipment or something similar.

• Question about CD recovery for Tecra M2

  Maybe it's a stupid to ask question, but the recovery for Tecra M2 CD comes with windows XP? I need to reformat my laptop, as it is infected by spyware unerasable. When I bought the laptop it only comes with the recovery CD.

  Hello

  There is no question beast just dumb response. The recovery CD with Windows XP Professional and all the necessary drivers, tools and utilities.

  You can install it on two tracks with the help of an installation standard and expertise. If you have only a partition there is possibility to do both by using expert mode. If you have more questions please write again.

  Good bye

• Tecra M7: Question about PC card compatibility

  Hello

  I have a Tecra M & and am quite satisfied with its performance. I work on a lot of video editing and had to get a Seagate 300 GB eSATA external hard drive in the hope of making life easier for me. I bought a SIIG eSATA II ExpressCard and believe that it is not compatible with the provision of the PC card in my system - which I believe confroms to standard CardBus.

  Is it possible to use my ExpressCard card? If this is not the case, is there a CardBus card that would allow me to use 3 GB of my new SATA hard drive throughput delivery?

  I've invested nearly 150 GB punds on things and wish to exploit technology to the maximum so that I can get smoother work with my video files.

  Any technical contribution must be assessed.

  Thank you
  siraJ

  What model Tecra do you have? You have entered am &' so uncertain. I haven't seen a converter SATA CardBus and doubt that it is likely, given the high SATA transfer rate.

  You may need to consider taking your gear back for a refund. But before do you that please confirm the Tecra model number so that we can look at this more.

• Satellite L350D - 20 d - question about graphics card memory

  Hi on start I want to sorry for my bad language lol

  I form a few days TOSHIBA SATELLITE L350D - 20 d
  I WIN with Vista reinstaling for XPsp3 after 29 hours of blame Microsoft for making Vista. or m.Kin another and another bootUSBpendrive and the mixture of the BIOS setings... succecfull Finally I reinstal system DVD... BUT!
  This may sound strange, but on Vista when I was check my details Graphisc in DxDiag I saw 1 700 MB of RAM... even with the RAM into the motherboard... RAM on the motherboard had 4GB...
  now I have Xp-Windows7(what is XPSP3) but modifited!... I've been using original Toshiba drivers from this Web site. .and I see now...
  My Ram on the card mother down t o 3.5 GB... and graphics card is about 700 MB of ram... I can say WTF...
  IM really not sure if this computer is ABLE to have 1 700 MB graphics card... That's if I remember well AtiRadeon 3100... or sometihnk...
  anyone has the same Toshiba model?... I want to compare the details of the hardware with this one to what I have now on my Toshiba SATELLITE L350D - 20 d...

  Edit:
  resolution, what I have now and it is maximum that I can choose its 1440 x 900 at 60 Hz only :/
  on the site Web of TOSHIBA Germany I see somethink difrente:

  Grafikadapter type: ATI Radeon 3100 Graphics
  RAM: Bis zu 1 407 MB complete Rechtssicherheit Grafikspeicher EIB 3 GB Arbeitsspeicher
  RAM type: geteilt
  Internal Auflösung Verfügbare video in-house Modi
  Auflösung: 1,440 x 900
  Auflösung external maximum maximum Auflösung: 2.048 x 1.536
  maximum Bildwiederholfrequenz: 85 Hz
  maximum resolution (not interlaced) EIB Genauigkeit Bildwiederholfrequenz: 1,600 x 1,200

  Post edited by: MzytengaM

  > I want screan LCD stop down and stay mobile mind on... no sleep or standby extended... CUS I use external monitor... and I want to save battery power.

  I found a small free tool called turn the wide-screen LCD. You can google for it if you want.
  But as far as I know, this tool is only compatible with Win XP and Vista, so I don't know if it will work on laptops with pre-installed m Win 7.

• A few questions about RAM upgrade for Tecra M5 (PTM51E)

  Hallo

  I have Tecra M5 (PTM51E). My questions are:

  Is it possible to put even more RAM on my laptop? (Now I have 1 GB),
  Should what kind of RAM I buy?
  Where can I buy it?

  And I can put this RAM on my laptop by myself or it is not so easy to do this?

  Hallo

  You can upgrade your Tecra up to 4 GB of RAM. Compatible modules are:

  PA3499U - 1 M 25 (Kit of memory 256 Mo DDR2-667)
  PA3511U - 1 M 51 (Kit of memory 512 MB DDR2-667)
  PA3512U-1M1G(DDR2-667 1GB Memory Kit)
  PA3513U-1M2G(DDR2-667 2GB Memory Kit)
  DDR2-533 256 MB (PA3389U - 2M 25)
  512 MB DDR2-533 PA3412U - 2 M (51)
  1 GB OF DDR2-533 (PA3411U-2M1G)

  Use the part numbers and put in the Google. You will find many online shops where you can order.
  You can also visit the homepage of Kingston and find compatible modules for your Tecra. Use only the numbers of parts and search for cheaper online store.

  All that s!

  Subject of the Exchange there not a lot of philosophy. See page 151 in s manuals for your Tecra.
  Everything is described here.

• Question about upgrade disk for Tecra M1

  Hello

  I have a failed 60 GB hard drive in my notebook Tecra M1 aged three years and decided to upgrade to a new drive before the existing one doesn't die. I would like to take this opportunity to install a slightly larger HDD (for example 80 to 120 GB) but I'm unclear as to the maximum permitted by the BIOS (1.5 v) has anyone successfully mounted a drive of more than 60 GB in a Tecra M1 or found definitive information on the limitations of the BIOS?

  Thank you very much

  Jezzer

  Hello

  I found information that the Tecra M1 supports 30 GB, 40 GB, 50 GB and 60 GB HDD.
  Perhaps you might be able to use a 80 GB HARD drive, but I think that the 100 GB HARD drive is definitely too large size of HARD drive.

  What about a HARD drive test? You could take the laptop to a merchant of HARD drive and you could test several sizes.
  I think that it is no bad idea. What do you think??

• Satellite L305-S5920: Question about PC card, new use HDD & Win XP

  I recently bought this machine in the mail and on arrival was disappointed to see that it is not equipped with a Firewire plug - I thought that all the machines which had today? Too bad, I thought I'd use my PCMCIA Firewire card. But then I found that what looks like a standard PCMCIA socket has a block to halfway down on one side which prevents a normal PCMCIA card being inserted. Snookered. What is this decision? Not one of my PC cards will go in.

  I then tried, had always been my intention to replace the 160 gb HD with a new 500 GB it and install XP on it. It's a very long story, but it culminates at Toshiba telling me that "this model will not work XP. Someone at - it ideas how to get around this problem?

  Either way, I don't seem to have all the means to re-establish a new HD Vista if/when this one fails. Am I expected to go out and buy, or I missed something? There is no "recovery partition" on the hard drive so there is no way that I can produce my own recovery disk.

  I then tried to play a DVD, to be told that it was the wrong region and could not be played. Quite absurd to place this restriction on laptops - I live in two Americas and Britain - but once again so much worse, I'll just load AnyDVD and continue nevertheless. But no - the carpet * a drive mounted by Toshiba is one of the few that cannot be decrypted.

  Therefore this machine, which works well in its own design constraints, is nowhere near what I wanted and expected it to be. Can someone suggest a solution to all of the above questions? Because I already ordered a different brand which according to me does not have these limits, but it would be useful to keep this as a spare if I can fix it.

  Hello

  First of all, I doubt that there is some design flaws
  Akuma has already said, there are devices that supports different standards.

  In any case, for the first I recommend that you check this Toshiba page we:

  [Satellite L305-S5920 - details-| http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=2241928& rpn = PSLB8U & modelFilter = L305-S5920 & SelCategorie = 3 & selFamily = 1073768663]

  You will find here all the details on this model Sat L305
  In the detailed specifications, you can find the info that this laptop uses the Express Card slot (ExpressCard/34 and ExpressCard/54). You must use Express cards instead of PCMCIA cards!

  You can also install the Win XP I n know not why, someone said that you can not do this strange however, you can install the Win XP and I found XP drivers too! Please visit US!

  The recovery of HARD drive partition is placed on European models of Toshiba. I put t know how it works on Toshiba WE series (perhaps drive HARD recovery is not available on laptops in the United States), but perhaps you need to create the first recovery disk in order to recover the laptop to factory settings.

  Greetings
  Jimi

• Question about the OpenGL on Tecra M1

  Hello
  I would like to watch (3D) topographic maps on my Tecra M1. For this I need a graphics card that is capable of doing OpenGL. Have I not such one and how can I activate it?

  Welcome them
  Thog

  Hi friend

  your computer has a graphics card "Trident Cyber-XP4" installed. Generally, it should be able to OpenGL, but probably not with the original Toshiba drivers.
  If I were you, I'd install alternative drivers from this site: http://www.soft32.com/download_174769.html

  But in addition you upgrade DirectX to the latest version available for your operating system. I assume you have Windows XP installed, make sure that you have at least DirectX 9 installed. If you don t have the latest version, then visit:
  http://www.Microsoft.com/downloads/details.aspx?displaylang=de&FamilyID=2da43d38-DB71-4C1B-bc6a-9b6652cd92a3

  Subsequently, you can check if OpenGL works by downloading this application: http://www.softpedia.com/get/System/Benchmarks/OpenGL-Geometry-Benchmark.shtml

  I don't know if the app running on your computer, but you can also try another 3D application that is based on OpenGL like Quake3 demo which can be downloaded from ID software.

  Welcome them

• Question about updating Bios for Tecra M5

  I bought the new tecra as M5 on May 12, 2006. I found the following bios updates.

  16/05/06 update BIOS Toshiba 1.50 - TRAD
  16/05/06 update BIOS Toshiba 1.50 - WIN

  Should I go for this upgrade? Please recommend me.

  Hello

  I na? don't know why you want to update the BIOS.
  Your device is fairly new in this case I na? t see any direction update the BIOS.
  Please note that the update of the BIOS is not without risk.
  If you use a bad BIOS or bad BIOS procedure if you may damage the card and these laptop parts are not very cheap.

  I agree with Flo. If your laptop computer is operating properly you shouldn't? t make the updates to the BIOS.

• A few questions about graphics card!

  I need a few questions on my graphics card because there is no answer on the internet = p:
  My graphics card is NVIDIA GeForce 6150SE nForce 430
  1. How can I check currently installed Shader Model on my pc?
  2. How can I tell what my graphics card Shader Model version support?
  3. If I have an incorrect version of the Shader Model installed on my PC so how can I install the right one?
  5 and what my graphics card DirectX version support? (I'm using DirectX 11 and if it is not one that my graphics card supporting?) How can roll it back or unistall and install DirectX 9?)

  1. Download and install this... GPU - Z... http://www.techpowerup.com/downloads/2244/TechPowerUp-GPU-z-v0-7-1/mirrors
  2. The above will give you this info
  3. The pilot of the complete manufacturer allows all the features. In addition, there is nothing that you can add.
  4. See #1

• Question about graphics card driver updates on Satellite U300 series

  I am installing Spyder2 Pro on Vista Home premium 32-bit, but I have problems with this load in CS2. I contacted Colorvision and they suggested that if the video card is more than 6 months old I would need the last update. I searched toshiba/intel Web sites and could not update, when I download and try to install it I have the version more up-to-date, which is 7.14.10.1263.

  Can anyone help!

  Hello

  I think you probably have an error during the download of the driver. As I know the latest version of the Intel VGA for Vista Home Premium 32 Bit drivers is '7.14.10.1409 '. Please click [HERE: http://downloadcenter.intel.com/filter_results.aspx?strTypes=all&ProductID=2301&OS FullName = windowsvista + * + Home + Premium % 2 C + 32 - bits + version & lang = eng & strOSs = 153 & submit = Go % 21] and download this driver to update your graphics driver to the latest version.

  Would be recognizing some comments if the update worked for you.

  Greetings

• Question about upgrading processor on Tecra A9 (PTS52E)

  Is an X 9000 compatible with this laptop?

  Thank you

  It should be straight Tecra A9?

• Question about the card memory on the Satellite A200-1VO

  Satellite A200-1VO a slot memory, for example slot for SD memory card, but I cannot insert any memory cards, the fap does not even open.

  In user manuals, you can find a list of supported cards. List of all maps must be readable without any adapter. All that s.

  I use a memory stick and SD card on my Satellite A200-1CR without any problem. If possible, try to contact and consult your dealer. It should be able to explain how to use youe Satellite phone-compatible cards.