Tecra M7: Question about PC card compatibility

Similar Questions

• Question about sound card on Satellite Pro L40

  Hello

  I use a program called Sibelius and recommended an ASIO compatible sound card.
  Can someone tell me if the sound in the satellite pro L40 series card is compatible ASIO?
  If not I can plug a card external sound which is compatible and if so how can I turn off the internal sound card.

  Thank you

  I really don't think not someone will be able to give you information about the ASIO compatibility, but I see no problem, that is if you want to use the external device. Card internal sound, you can disable it in Device Manager.

• Question about sound card on TECRA T9000.

  Hi, I have a TECRA T9000, who seems to have a mind of its own, I am trying to load Win XP Pro top, and he insists that he has a card his YAMAHA but my test drive say it has an INTEL AC 97 sound card, when I try to uninstall the YAMAHA software it loads then it turn back on and I can't sound. Anyone know how to fix this or am I condemned to watch movies without sound? You can provide any help would be greatly appreciated.

  Hello

  As far as I know the device delivered with Yamaha YMF753.
  This is information I found:
  Yamaha YMF753 16-Bit-Stereo Sound Blaster Pro compatible System (WAVE und MIDI)

  In this case, you need the site Web of Toshiba Yamaha rider.
  Please visit this site and looking for this driver.

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Good bye

• Tecra T9000: Question about Cd/DVD reader compatibility

  Anyone know what cd/dvd that fits into the Tecra T9000. I bought one where the cd is missing

  See you soon

  Hi aceman

  I suppose that you bought the a drive that is not compatible with your device.
  You should be careful with these products. Not all readers operate on all laptops. There's a different pin assignment that makes compatible players.

  I think that the information that was posted by jmatthews is correct. You have two options: you can google for part numbers or contact the Toshiba ASP in your country and control compatible player of them.

• Tecra M3 - questions about the RAM maximum and graphics driver update

  Hi people,

  I have a Tecra M3 (Variant FBCF with the Geforce 6600 w / 128 MB) and I have two questions that I hope someone here can help me with:

  (1) what is the maximum amount of RAM that I can install here? The manual says 2 GB (2 x 1 GB), but I do not see why the laptop would be paralyzed this necessary way, cause as far as I know the 915G chipset can handle 4 GB of RAM. If anyone knows definitively what?

  (2) the latest drivers from nvidia for XP are 2005. As most of you probably know, nvidia systematically more than past performance with versions driver and adds compatibility with some games that end up in trouble. The real driver from the nvidia site does not install because it says that it cannot find any compatible hardware. Can't Toshiba even a pilot updated annually? There is a driver of 2007 for Vista, I can't believe that if they did, they decide refresh the XP one while they were to him. Any chance of their audience on this here? I could force the nvidia.com driver to install, but I don't think that it's necessarily a great idea.

  Thank you!

  Hello

  the maximum amount specified for this machine memory is 2 GB and 4 GB not but you can try it with 2x2gb modules.

  With regard to your graphics: Don t use the nvidia driver since it is not suitable for mobile graphics chipsets and has no timing in the driver that is needed to run flawlessly.

  I'd rather you to view laptopvideo2go and download some drivers here. :)

  Welcome them

• Tecra M1: Question about 21003B wireless adapter

  I have a Tecra M1 with 21003B wireless adapter. Company connection to one of our Wi - Fi points poses no problem - stay connected is a science.

  All the 1-2 hours all Wi - Fi access points 'disappear' app to auto-detection. The only way to reconnect is to disconnect XP (SP2).

  Any ideas?

  Hello

  Well, this really strange question. I found on the site of Toshiba four different
  WLan drivers. I suggest trying another driver, maybe this will help.

  Best regards

• Tecra A2: Question about DVI and external monitor

  Hello
  I am trying to get a DVI Signal of the Tecra A2 using the Advanced Port Replicator III but without success. The A2 does support DVI anyway?
  Another question: is it possible to set up the main display to the external monitor using "extended Desktop"?

  Thank you
  Ralph Menon

  Hello Ralph

  Your unit doesn t support DVI port and you can't use it. As far as I know just the ports that you can find on the device, you can use in Port Replicator because the signal is just loop through.

  The problem with the screen is that mobile has the main value and it cannot be changed (on my Tecra M1 nor). The windows will be implemented on an external but password box will always be displayed on the screen of the laptop.

  Good bye

• Tecra M5 - Question about upgrades

  I had my Tecra N5-ptm51e for a few months and was looking to update and ive got 3 questions

  1. What is the best compatible processor with my laptop.

  2. What is the max ram supported

  3 ive tried upgrading my laptop to Windows 7, but I needed to update my bios and I tried to do and she didn't

  If anyone can help me with this, so I will be gratful

  Thank you very much
  Rhys

  Hello

  OK, so I'll try to help you as best I can ;)

  1 update CPU is not supported as you can read here:
  http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

  2 maximum capacity of RAM for your Tecra M5 should be 4 GB according to the specifications. This means that you can install the 2 GB of memory on each RAM slot.
  The specifications are DDR2-667 you need.

  3 and what's exactly happened after update BIOS? You can start your laptop?
  I put t think that BIOS update is required for Windows 7. In your case I Don t do this update, Windows 7 will also work with the old version.

• Tecra M4: Question about video memory

  I was forced to buy spec UK Tablet which comes with only 64 MB of memory video.

  Can it be upgraded to 128 MB?

  The assistance service said yes but a service senter said no.

  Hello

  Well, as far as I know the Tecra M4 was delivered with two graphics cards.
  -nVIDIA GeForce FX Go6200 with 64 MB
  -nVIDIA GeForce Go6600 with 128 MB FX

  I think that there are many types of Tecra M4 with and many other different parts (CPU, HARD drive, etc.).
  I think that if you want to change the graphics card, you need to change other pieces of equipment. (motherboard, cooling, fans, etc.)
  In this case I suggest that it of not possible to upgrade the card without any other replacements.

  Best regards

• Tecra 8000: Question about the possibility of upgrade

  I have a tecra 8000 with a pentium 2 300 mhz processor and I was wondering if it would be up to class? any help would be appreciated thanks.

  Hello

  Well, in general it is not possible to upgrade the CPU because the cpu is fixed and soldered on the motherboard. But sometimes the CPU is only mated. I'm not sure about this device, but as far as I know, this device was shipped with Pentium II 400 233 MHz, 333 MHz and 400 MHz Dixon.
  But if you want to upgrade the CPU to change many other parts because the plu processor produce more heat and this process can cause overheating problems.
  So if you want you can request the service of Toshiba for details.

• Satellite L305-S5920: Question about PC card, new use HDD & Win XP

  I recently bought this machine in the mail and on arrival was disappointed to see that it is not equipped with a Firewire plug - I thought that all the machines which had today? Too bad, I thought I'd use my PCMCIA Firewire card. But then I found that what looks like a standard PCMCIA socket has a block to halfway down on one side which prevents a normal PCMCIA card being inserted. Snookered. What is this decision? Not one of my PC cards will go in.

  I then tried, had always been my intention to replace the 160 gb HD with a new 500 GB it and install XP on it. It's a very long story, but it culminates at Toshiba telling me that "this model will not work XP. Someone at - it ideas how to get around this problem?

  Either way, I don't seem to have all the means to re-establish a new HD Vista if/when this one fails. Am I expected to go out and buy, or I missed something? There is no "recovery partition" on the hard drive so there is no way that I can produce my own recovery disk.

  I then tried to play a DVD, to be told that it was the wrong region and could not be played. Quite absurd to place this restriction on laptops - I live in two Americas and Britain - but once again so much worse, I'll just load AnyDVD and continue nevertheless. But no - the carpet * a drive mounted by Toshiba is one of the few that cannot be decrypted.

  Therefore this machine, which works well in its own design constraints, is nowhere near what I wanted and expected it to be. Can someone suggest a solution to all of the above questions? Because I already ordered a different brand which according to me does not have these limits, but it would be useful to keep this as a spare if I can fix it.

  Hello

  First of all, I doubt that there is some design flaws
  Akuma has already said, there are devices that supports different standards.

  In any case, for the first I recommend that you check this Toshiba page we:

  [Satellite L305-S5920 - details-| http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=2241928& rpn = PSLB8U & modelFilter = L305-S5920 & SelCategorie = 3 & selFamily = 1073768663]

  You will find here all the details on this model Sat L305
  In the detailed specifications, you can find the info that this laptop uses the Express Card slot (ExpressCard/34 and ExpressCard/54). You must use Express cards instead of PCMCIA cards!

  You can also install the Win XP I n know not why, someone said that you can not do this strange however, you can install the Win XP and I found XP drivers too! Please visit US!

  The recovery of HARD drive partition is placed on European models of Toshiba. I put t know how it works on Toshiba WE series (perhaps drive HARD recovery is not available on laptops in the United States), but perhaps you need to create the first recovery disk in order to recover the laptop to factory settings.

  Greetings
  Jimi

• Satellite L350D - 20 d - question about graphics card memory

  Hi on start I want to sorry for my bad language lol

  I form a few days TOSHIBA SATELLITE L350D - 20 d
  I WIN with Vista reinstaling for XPsp3 after 29 hours of blame Microsoft for making Vista. or m.Kin another and another bootUSBpendrive and the mixture of the BIOS setings... succecfull Finally I reinstal system DVD... BUT!
  This may sound strange, but on Vista when I was check my details Graphisc in DxDiag I saw 1 700 MB of RAM... even with the RAM into the motherboard... RAM on the motherboard had 4GB...
  now I have Xp-Windows7(what is XPSP3) but modifited!... I've been using original Toshiba drivers from this Web site. .and I see now...
  My Ram on the card mother down t o 3.5 GB... and graphics card is about 700 MB of ram... I can say WTF...
  IM really not sure if this computer is ABLE to have 1 700 MB graphics card... That's if I remember well AtiRadeon 3100... or sometihnk...
  anyone has the same Toshiba model?... I want to compare the details of the hardware with this one to what I have now on my Toshiba SATELLITE L350D - 20 d...

  Edit:
  resolution, what I have now and it is maximum that I can choose its 1440 x 900 at 60 Hz only :/
  on the site Web of TOSHIBA Germany I see somethink difrente:

  Grafikadapter type: ATI Radeon 3100 Graphics
  RAM: Bis zu 1 407 MB complete Rechtssicherheit Grafikspeicher EIB 3 GB Arbeitsspeicher
  RAM type: geteilt
  Internal Auflösung Verfügbare video in-house Modi
  Auflösung: 1,440 x 900
  Auflösung external maximum maximum Auflösung: 2.048 x 1.536
  maximum Bildwiederholfrequenz: 85 Hz
  maximum resolution (not interlaced) EIB Genauigkeit Bildwiederholfrequenz: 1,600 x 1,200

  Post edited by: MzytengaM

  > I want screan LCD stop down and stay mobile mind on... no sleep or standby extended... CUS I use external monitor... and I want to save battery power.

  I found a small free tool called turn the wide-screen LCD. You can google for it if you want.
  But as far as I know, this tool is only compatible with Win XP and Vista, so I don't know if it will work on laptops with pre-installed m Win 7.

• Tecra A5: Question about usage and warranty

  Once again, Hej
  Thanks a lot for your responses to my previous threads.
  I saw the Toshiba Tecra A5 only in photos, some of you have one of these?
  My Toshiba model (A5) favorite cams with 2 years warranty and support, but what happened after these two years?
  Can I expect to use a Toshiba for more than two years, as I would like?

  In fact, I expect to use this laptop for three years and have no problem with him :)

  Hi Liviu

  Please see the second section where you posted the same question:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=12546

  You will find a big answer for your question.

• Tecra 8000: questions about memory, mouse and screen

  Hi, im using a tecra 8200, mouse keeps drifting upward left after 30 minutes? keyboard problem?
  Sometimes the screen displays changr, from very dark then normal?
  Finally I was told that I can put in a module of 512 mem alongside 256 existing will this work.
  Thanks for any reply Biffo

  Hello

  As you know on this path it is not easy to give you a good answer on all these problems. The same happen to me with my mouse, but AFAIK it's normal because the mouse must obviously be calibrated again and again.

  Daniel is right about the memory. You can use two modules with 256 MB (PC100 256 MB - PA3069U - 1 M 25). 512 MB should be max according to the specifications of this unit.

  Good bye

• A few questions about graphics card!

  I need a few questions on my graphics card because there is no answer on the internet = p:
  My graphics card is NVIDIA GeForce 6150SE nForce 430
  1. How can I check currently installed Shader Model on my pc?
  2. How can I tell what my graphics card Shader Model version support?
  3. If I have an incorrect version of the Shader Model installed on my PC so how can I install the right one?
  5 and what my graphics card DirectX version support? (I'm using DirectX 11 and if it is not one that my graphics card supporting?) How can roll it back or unistall and install DirectX 9?)

  1. Download and install this... GPU - Z... http://www.techpowerup.com/downloads/2244/TechPowerUp-GPU-z-v0-7-1/mirrors
  2. The above will give you this info
  3. The pilot of the complete manufacturer allows all the features. In addition, there is nothing that you can add.
  4. See #1