Question about SRM volume requirements

Similar Questions

• Question about SRM alarms

  Hello

  I saw the following alarms:

  Group of shadow created / deleted

  Replication group created / reconfigure / deleted

  I want to understand what is the replication group and the Group of shadow and what are these alarms.

  If I remember correctly the replication group is the Group of protection seen on the server of the SRM. I think you see the term replication group used in newspapers.

  This protection/replication group is then known as a Group of shadow on the recovery SRM server. Again, you can consult these references in newspapers. The site of recovery SRM server must know the protection groups because it is where you will build your recovery plans and stimulus packages will contain protection groups.

  So, to summarize:

  Protection group = replication group on protected site = group of shadow on the recovering site.

  HTH

  Cormac

• Question about SRM and backup servers

  Hello

  Is it necessary to use dedicated servers for recovery automated with SRM or in a double room configuration, a cross-backup can be done using servers the virtual computer running, but with some CPU/memory available for potential backup of virtual machines from the other room?

  Thank you.

  Hello

  Yes, it is possible. We have 4 servers in City A and 4 servers in city of B. A is protected at the city B and B in the city is protected in A city, so I can attest to the solution that you want to run No need have dedicated servers in the room has to manage the workload Bs room in tilt, as long you have availible resources

• Question about the volume on several virtual machines sharing

  Hey!

  Try to use vmkfstools on Vi remote CLI, but he says that he is not recognized as an internal or external command... Is there an easy way to share data between several virtual machines? If so, how? Also if we are implementing raid 5 are we building our vitrual (windows 2008 Server) with the typical c: or d: drives? That is to say. You put the Windows Server 2008 on a separate virtual C: drive and data on a disk separate from virtual D:? Or is it no more? What about the Windows swap files? Must create us virtual drives, JUST for page files? Sorry I know this is a lot, but any help would be greatly appreciated!

  Thank you!

  1. is there an easy way to share data between several

  virtual machines? If so, how? A CIFSor NFS share would be preferable. Since I got you guess the VMS are mainly Windows you want to go with a CIFS share. You can run a virtual NAS appliance  (http://www.openfiler.com/community/download/)

  Also if we are implementing raid 5 are we building

  our vitrual Server (windows server 2008) with the typical c: or d: drives?

  That is to say. You put the Windows Server 2008 on a separate virtual C: drive

  and the data on a virtual disk from D:? Or does not everything

  more? Yes design you virtual as your physical systems i.e. separate Boot/system information application. just build you VMs how you would with physical systems (especially true of SQL or Exchange).

  What about the Windows swap files? We create virtual drives

  Yet, ONLY for page files? Never did it for physical so no systems

• Question about power z820 requirements

  
  

  The amount of energy consumed by the Z820 depends on the configuration and the system how busy is.  Lists of QuickSpecs HP believes some configurations and power on pages 21-24.  Certainly a double system of 12 core high range with a 225W graphics card will use a lot of power, so all hearts are run 100%.  This is why there is a power supply 1100W (sorry of course).
  
  It will use as much as a toaster?  Maybe, if we're running SETI or folding programs 100% of the time with the use of the CPU to the maximum, including graphics GPU, but it is likely, if there is only 1 card graph.  The Z820 will usually take ~ 400W idling, but 800 + watts is possible under load.  It will heat the room.  But most applications use all the capabilities of the system all the time, unlike the toaster that attracts ~ 1100W all the time it is turned on.
  
  There are monitors of inexpensive power, such as the P3 Kill A Watt meter charge which can show the use of the power.
  
  Try to find out how the power outlets are distributed in your apartment.  There should be several points of sale from 15 to which are fastened together in a place that does not normally a quantity of objects running at any given time, or are not connected to the device.  Perhaps a bedroom?  In my house, the kitchen have the toaster, coffeemaker and refrigerator all plugged into them.  They go off the circuit breaker when all lights at the same time.  I moved one of these items to a struggling group that has no elements of high power connected.

• A few questions about Toshiab reocvery disk for Satellite P300-133

  Hello guys,.
  I had a few questions about unpleasant surprises of recovery:

  (* 1) * I just make recovery DVD using Toshiba Recovery Disk Creator and he asked initially for 2 DVDs - but when one has been done it does not require a second blank DVD. Is it possible all the Windows Vista system files to write on 1 DVD?

  (* 2) * if I could reinstall Windows Vista using recovery of HARD drive option (by pressing F8) without using the recovery DVD?

  (* 3) * HARD drive partitions that will be formatted (just system C: or C: and E :) using HARD drive recovery?

  (* 4) * what is DVD - Image of the hard drives or the installation of Vista recovery files?

  Its pretty bad idea to not include BONES on DVD when I paid for it.
  Thanks for all the Toshiba problems :(

  1. I think the recovery disk creator means 2 CDs. I also have a Portege M700 with Windows Vista and a DVD. I got it and after that, I have a clean install of Vista with all the drivers and tools of Toshiba. Nothing is missing.

  2. Yes, you can reinstall Vista using recovery of HARD drive option when you press F8 at startup. You don't need the recovery DVDs, but you should create a when your HARD drive get some errors or something else. If you need a new recovery DVDs, you paid for one.

  3 HARD drive and complete partitions will be formatted, so backup your data first on a DVD disk external DRIVE, USB stick or something else.
  After the reinstallation, you have factory settings.

  4. the recovery DVDs is an image of the HARD disk on the factory settings. If you perform a recovery, there are all the drivers and tools are already installed. Of course, on the disk are files of installations of Vista, but you can use this DVD on your Satellite P300. The disc cannot be used on another Satellite or on a PC.

  If you have any other questions, take a look in the user manual. There are a number in the formations of the recovery. It s in Chapter 3.

• Questions about reinstalling Windows XP after the end of Support

  Several members of the family of my friends that I sometimes provide technical assistance for are still under XP SP3 on their systems.  These systems are too outdated and underpowered to upgrade to a newer version of Windows, and it will probably be some time until they are able to upgrade to a more recent hardware capable of running most modern versions of Windows.

  If in the meantime, something happens to one of their computers requiring a reinstall of Windows after support for XP purposes, but before they can get a newer computer, I have a few questions about what will happen:

  1. Is there still a way to activate their existing copies of XP during installation process?
  2. While I understand that new patches, updates, patches & will be is no longer provided, existing patches will be available through the Microsoft Update service so that I would be able to get those computers to update state that they would be about to XP supported ends, or do I have to search elsewhere to try & find these updates?  (It would be nice if Microsoft put up a cumulative update that would be sort of a mega-patch for people in this situation to be able to get back to the most current state systems, but I would not be surprised if there wasn't such a thing).

  Anyone know the answers to these questions?

  Thank you

  You should be able to clean install and activate Windows XP.  You should be able to upgrade as well, even if the wise move would be to get the updates stored on portable media or integrated into a multimedia installation (or both) as soon as POSSIBLE if the plan is to continue using Windows XP for a while.

  My suggestion is to set up and to buy Windows 7 Professional renovated systems / lease from places like TigerDirect.com - as pricing is generally about the same as just a license for Windows 7 or a little professional, the hardware specifications of these machines are likely machines Windows XP current in use, using something like the PC Mover take care of Laplink and Microsoft to move files (or for the more than 25 USD the) applications that can be moved as well) to the new system of the former is possible, and Windows 7 will get updated until 2020.

  Recently research I've seen systems to Windows 7 Professional for as little as 150 USD with 4 GB of memory and dual core processors.  Not bad.

• INSPIRION 3543 - question about jack combo

  Hi, I have a question about a laptop Inspiron 3543. He installed the combo input jacks, and I need to use the line of input and output audio.

  Question 1: Is - it enough for me for this purpose a headphone splitter - 2 jack x ordinary?

  Question 2: Is this laptop allows you to adjust the entry on the line in mic?

  Sorry for the broken English, but I write with a translator: D

  dayer41

  Question 1: Is - it enough for me for this purpose a headphone splitter - 2 jack x ordinary?

  Hello. Jack combo on the Inspiron 15 3543 is intended to be used with standard stereo headphones, or with headphones (stereo headset with a built-in mono microphone).

  In theory, a dispatcher or an adapter with a plug out of SOCKET (tip, ring, ring, sleeve) can be used with a combo Jack. A plug from SOCKET looks like this:

  

  However, we have received many messages from people saying that the adapter did not work for them. Some people have posted and said that the adapter works for them.

  Note that the entry of a combo Jack is mono. There is no way to make it be a stereo input.

  dayer41

  Question 2: Is this laptop allows you to adjust the entry on the line in mic?

  You can set the input mic in sound properties volume (Control Panel > Sound). Open the properties of the sound, and then click the recording tab at the top. Right click on the Microphone. Click 'properties '. Click the tab at the top levels to find the sliders to adjust the volume of the mic input.

  It is similar to this image, except that you must click on 'Levels', not 'listen '.

  

• A few questions about FileConnection/JSR 75

  [I posted these issues some time ago, but got no response]

  I am writing an application that targets the 4.2.1 and upward. After reading everything I can find (api docs, forum, kb, guides, web search), I still have many questions about the BlackBerry file system:

  1. Are store / and SDCard / internal name of the memory and the SD card root on all BlackBerry devices?
  2. JSR 75 leaves open the question of whether an application sees the virtual roots that are private to itself or if all applications share the same roots. How does on BBs? I have seen many examples where the path name starts by "/ store/home/user/app_name /" or "/ SDCard/BlackBerry/app_name / '. Is this necessary, or can my request simply use "/ store /" or "/SDCard/" and add the file name? If the former, are there best practices documented anywhere to manage collisions between app names?
  3. If the files are visible in many applications, there are layers of security available to protect data (I think something similar to how a PersistentObject can be encapsulated in an object ControlledAccess using the PersistentStore) or do make us our own?
  4. I read on this forum somewhere that store / is not available when a device is connected via USB and mass storage is active. Is this and other information like this documented somewhere?
  5. May restrict the COMPUTER strategies how an application uses FileConnection, particularly to the store / and SDCard /? If so, is there any guidance on common restrictions that developers should know when you write applications for general use?
  6. What restrictions are there on the names of files (allowed characters, length, etc.)?

  Any guidance or pointers will be appreciated!

  Hi Ted,

  I'm not sure on your remaining questions, but I'll try to answer as best I can:

  1. did not have different names on the devices until today.

  2. you have no problem on SD card and you are allowed to save files anywhere it. Not quite sure

  shop around, but you should be able to save files on the file system visible and own created folders. There will be

  some folders inaccessible devices that require internal processing (installed Te of applications etc..).

  3. you can open files as readonly etc. but elsethere it is not the layers of security installed. If you have data

  issues of security, you must save this Te using the RuntimeStore class!

  4. I don't know, but it's a fact. But for this purpose, you can detect the toggling of mass storage

  programmatically.

  5 see point No. 3

  6 see restrictions as specified in JSR 75.

  Kind regards

  Jochen

• Questions about discussions...

  Hello

  I have a new app to do that requires network access.

  I have read this EXCELLENT post from peter_strange:

  http://supportforums.BlackBerry.com/T5/Java-development/connecting-your-BlackBerry-http-and-socket-c...

  Because I can't use BIS - B because I'm not a partner of the Alliance, I wanted to take a look at the new OS 5.0 network API and see how it works.

  I know that network connections should be performed in a separate thread.

  I'm far from being an experienced Blackberry developer... so I have a few questions about discussions.  I looked around the Internet, read on the forum, read the documentation, did some tests and so far, I came up with this code:

  SerializableAttribute public class HTTPConnection extends UiApplication {}
  Public Shared Sub main (String [] args) {}
  HTTPConnection PAP = new HTTPConnection();
  theApp.enterEventDispatcher ();
  }

  public HTTPConnection() {}
  pushScreen (new HTTPConnectionScreen());
  }
  }

  class HTTPConnectionScreen extends form {}
  public HTTPConnectionScreen() {}
  setTitle ("HTTPConnection");
  Add (new RichTextField ("choose a type of connection :"));

  final RadioButtonGroup = new RadioButtonGroup() rbGroup;
  RadioButtonField radioButtonF1 = new RadioButtonField ("Direct TCP", rbGroup, false);
  RadioButtonField radioButtonF2 = new RadioButtonField ("WAP 1.0/1.1", rbGroup, false);
  RadioButtonField radioButtonF3 = new RadioButtonField ("WAP 2.0", rbGroup, false);
  RadioButtonField radioButtonF4 is new RadioButtonField ("BES/MDS", rbGroup, false);.
  RadioButtonField radioButtonF5 = new RadioButtonField ("BIS-B", rbGroup, false);
  RadioButtonField radioButtonF6 = new RadioButtonField ("WiFi", rbGroup, false);
  Add (radioButtonF1); Add (radioButtonF2); Add (radioButtonF3); Add (radioButtonF4); Add (radioButtonF5); Add (radioButtonF6);
           
  FieldChangeListener listener = new FieldChangeListener() {}
  ' Public Sub fieldChanged (field field, int context) {}
  ConnectionThread ct = new ConnectionThread (rbGroup.getSelectedIndex () + 1);
  CT. Start();
  }
  };
           
  ButtonField buttonField = new ButtonField ("Connect", ButtonField.CONSUME_CLICK);
  buttonField.setChangeListener (listener);
  Add (buttonField);
  }

  / * method of onSavePrompt override default to avoid being asked if I want to record every time * /.
  protected boolean onSavePrompt() {}
  Returns true;
  }
  }

  class ConnectionThread extends Thread {}
  private int transportType;
  public ConnectionThread (int n) {}
  transportType = tt;
  }
      
  public void run() {}
  ConnectionFactory connFact = new ConnectionFactory();
  ConnectionDescriptor connDesc = connFact.getConnection ("URL", transportType, null);
  If (connDesc! = null) {}
  try {}
  HttpConnection httpConn = (HttpConnection) connDesc.getConnection ();
  httpConn.setRequestMethod (HttpConnection.POST);
  httpConn.setRequestProperty ("Content-Type", "application/x-www-formulaires-urlencoded");
  OutputStream out = httpConn.openOutputStream ();
  out. Write (Integer.ToString (transportType). GetBytes());
  int responseCode = httpConn.getResponseCode ();
  If (responseCode == HttpConnection.HTTP_OK) {}
  UiApplication.getUiApplication () .invokeLater (new Runnable() {}
  public void run() {}
  Dialog.Alert ("- SUCCESSFUL CONNECTION-");
  }
  });
  }
  If (httpConn! = null) httpConn.close ();
  } catch (IOException e) {}
  System.Err.println ("IOException Caught:" + e.getMessage ());
  }
  }
  }
  }

  In fact, this code works very well... but I want to improve it, and I have a few questions:

  1. I think that right now, every time I click on the 'Connect' button, I start a new thread. I would like to end this thread in the "run" method, but I don't really know how to access the variable 'ct' from there.   Counsel on how to do it?  Or maybe always use the same thread until my application is closed?

  2. in the FieldChangeListener of my "Submit" button, I want to access the value of radio box.  I did work, but I had to do my 'final' variable  What is the right way to do it?

  3 - to display a dialog box with 'Successful connection', I just wanted to write something in my main screen.  How I do that?

  I'm just a bit confused as to just what set up when you use a separate thread.

  Thanks for your advice!

  Edit: Hidden URL I connect to...

  That's what I call a good question! (now I'm wondering why the forums do not work with opera correctly, in any case, here my baldy to the answer format): 1. your thread "dies" when it's over, no need to close it. 2 Yes 3. You can use a reminder. See for example http://www.javaworld.com/javaworld/javatips/jw-javatip10.html

• Small questions about Dataguard

  Hello

  I have a few questions about Dataguard. I'm new to DG, carry me so for the display of these fundamental questions:

  We plan to install Oracle 12 c to Win 2012 R2 with primary and physical intelligence on different physical servers. We are looking for HA solution, but cannot afford to license CARS. The two primary & Eve are going to be in the same data center connected via a 1 gigabit network. So I have a few questions related to it.

  (a) since both of our primary & Eve is going to be in the same data center with good connectivity. Can I assume that although Data guard is more DR solution, in our case it would be HA solution since we have no network latency.

  (b) is it safe to assume that where primary fails, then the day before can automatically take the role of primary education without any manual intervention, possibly using Dataguard broker?

  (c) so I understand that where primary breaks down, the existing connections transfer automatically from primary to standby db (most recent primary), but how my web based java application will know that more recent connections must be sent to the standby db Server (more recent primary)? I guess net Oracle has a provision to handle this? Who can be automated?

  (d) given that I have only 2 physical servers, can I deploy broker Dataguard on a normal PC (since it is a thin client) assuming the PC is kept in the data center and is online 24/7?

  (e) I was reading about the modes of Protection, account required to our current situation & infrastructure, I choose 'Maximum availability Mode' instead of 'maximum Performance '.

  (f) what is your point of view about Oracle integrated security? I hear too much on Oracle failsafe, because people generally go to a combination of CARS & dataguard for HA? We have a few additional storage that can be shared between the two servers, but I feel with literally no DG network latency can provide us HA.

  Concerning

  Learner

  (a) since both of our main & secondary is going to be in the same data center with good connectivity. Can I assume that although Data guard is more DR solution, in our case it would be HA solution since we have no network latency.

  Well it will not provide the level of HA that is RAC. RAC is a Transparent Application failover. With a physical standby, you need to apply some delay for a failover operation. You can implement the observer that can automate the failover and reduce the time.

  (b) is it safe to assume that where primary fails, then the day before can automatically take the role of primary education without any manual intervention, possibly using Dataguard broker?

  This isn't really the DG broker, but rather the observer you will need to implement. The DG broker automate failover. It will be the observer who "sees" (where its name) that the principal is down and initiate the failover process. To do this, the observer will use the DG broker, so it will be necessary.

  (c) so I understand that where primary breaks down, the existing connections transfer automatically from primary to standby db (most recent primary), but how my web based java application will know that more recent connections must be sent to the standby db Server (more recent primary)? I guess net Oracle has a provision to handle this? Who can be automated?

  You'll want to read on the QuickStart failover. http://www.Oracle.com/technetwork/articles/smiley-fsfo-084973.html

  (d) given that I have only 2 physical servers, can I deploy broker Dataguard on a normal PC (since it is a thin client) assuming the PC is kept in the data center and is online 24/7?

  The DG broker is required to run on the database server. The DG broker will run on the primary and standby. I think that what you're asking really anything is if the observer can run on a PC. Yes it can. However, it is probably not a good idea. A PC will not have the internal hardware redundancy, a server can have. If the PC can fail more often than to a server. And if the gods are bad, it will fail when you most need.

  (e) I was reading about the modes of Protection, account required to our current scenario & infrastructure, I choose 'Maximum availability Mode' instead of 'maximum Performance '.

  Your choice should depend on the amount of data loss is acceptable.

  (f) what is your point of view about Oracle integrated security? I hear too much on Oracle failsafe, because people generally go to a combination of CARS & dataguard for HA? We have a few additional storage that can be shared between the two servers, but I feel with literally no DG network latency can provide us HA.

  Oracle integrated security only works on Windows with a MS Failover Cluster. Real DBAs do not have Oracle on MSFC.

  See you soon,.
  Brian

• Several Questions about Visual Studio Express 2012

  Hi, I have several questions about Visual Studio Express 2012.

  1 is. each product (for the Web, Windows Phone, Windows 8, for office, etc) of Visual Studio Express 2012 using the individual installation package? Do I have to do the installation for each product? Is there an integrated package for all these products?

  2. the IDE of Visual Studio Express 2012 there a difference with other versions of charges, such as automatic and semiautomatic filling?

  3. don't Surface Pro 128 G meets the minimum hardware requirements for Visual Studio 2012 requirements and Visual Studio 2012 runs smoothly on Surface Pro?

  4. What is the difference between full MSDN and essential version in detail?

  Thank you.

  Hello

  Please post any questions about Visual Studio on the following forums.

  Category Visual Studio:

  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio

  Concerning

• Question about cloud connectors

  We try to create a cloud to Eloqua connector. I read the CloudConnectorSampleGuide. I have a few questions about the expected data models and models of general implementation.

  Configuration of the connector of the cloud

  • The CC stores the identification information for each configured CC step Eloquya Eloqua?
    • What are the guidelines for the safe password storage? (I can't store the passwords as dirty one-way-hash that I need the password during execution.  The two-way hash gives an illusion of security but is not better than the plaintext).
  • When the CC is configured, where credentials should take place between the 1st and the 2nd screen? (i.e. as a hidden form field, session cookie cookie/etc.)
  • Eloqua warns the CC when a step is deleted?

  Cloud connector performance

  • What is the average number of steps configured Single that manages the CC?
  • Is it possible for a CC to have 1000 s and unique not configured to query?
  • What are the guidelines for scalability when the connector has to travel 1000 steps configured and survey? The CC requires a worker architecture to manage a large number of configured steps?
  • Are there best practices around the CC recovery hangs
    • For example: CC acquires the State waiting for members and moves to the current State. The CC blocks before the end of the stage. What is the approach suggested for

  recovery of the tasks in the current handling during recovery state? (assuming I have multiple instances of CC of the Eloqua poll). Is the connector of cloud supposed to maintain States of WIP to manage recovery correctly?

  Dmitry, once again, it is entirely to the developer.  When you add contacts to a stage, they will be processed in batches.  There is no limit to how much you add, and since they are left to step up to that dealt with by the connector, how long they sit depends on how long your connector takes to do its job.  Expectations, of course the faster you can deal with the best.

• Question about creative cloud "individuals".

  Hello!

  Question about creative cloud "individuals".

  I'm a single trader working in Russia. I have an advertising agency. Work alone.

  Issues related to the:

  1 can be installed on 1 computer and use creative cloud 'Individuals' for commercial purposes?

  2 will. what documents I receive after payment?

  3. under what conditions, the required version of the '' Business. ''

  lol at communincate with the support of adobe:

  Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• Can question about a possible question, I do it my way?  The end result really me the measure of success?

  I have a question about a theoretical question of the VCAP (specifically the example below).  I could do it is a flash by going directly to the host instead of using the stinking vMA and resxtop, I've always will mark the full points by my way?

  "

  Scenario 11

  < Return | Next >

  Scenario:

  On a specific host of ESXi, a set of virtual machines is not good. You intend to determine the root cause. To do this, you want to collect usage data of resources at a level more granular than vSphere Client performance graphs can provide.

  Requirements:

  • Use resxtop to collect all the statistics for 2 minutes every 3 seconds.
  • Export the data to a CSV file called results.csv.
  • Import the results.csv file in the Windows performance monitor.
  • Use Windows performance monitor to indicate the time of CPU ready for all the virtual machines on the 2 minute period.

  Environmental information:

  • ESXi host: Home - 01.lab.local

  VDCA510 goal: 3.4 use Advanced vSphere Performance Monitoring Tools
  VDCA550 goal: 4.1 use Advanced vSphere Performance Monitoring Tools

  Guide reference (s):

  • Chapter 4 - using vSphere Advanced Performance Monitoring Tools - Interactive ESXTOP, commands and Modes of Replay"

  I'm under the impression that it was some sort of bug, fixed now, thanks to you guys useful...

  urgent vMA, would appreciate your help VCAP is tomorrow.

  Always extremely frustrating in the circumstances