B1 - A71 Bootloop and unable to factory reset

Similar Questions

• Unable to Factory reset HP 2000 Notebook PC

  Product: HP 2000 Notebook PC

  OS: Windows 7 Ultimate 64 Bit

  Hello

  I backed up my notebook complete and ready to factory reset, but I am unable to do this.

  I was not able to find the Manager HP recovery on the computer nor a download available for it. I held the F8 key during reboot, but I only have a system restore point option, not a factory settings option.

  Unfortunately, I don't have a CD of Windows 7 ultimate

  Don't know not where to go forward and help is appreciated.

  Thank you!

  Hello

  If the recovery Partition is still intact, you can launch it by closing the notebook, then typing away at f11 as soon as you start the laptop.

  Kind regards

  DP - K

• voice on does NOT even when her off in settings and return to factory reset

  voice on isn't turned off, even when its off in settings and I did a btw the last Apple tv a factory reset update

  For the VoiceOver:

  Settings > general > accessibility > voiceover

  For a description of the Audio:

  There are two parameters that can affect the audio descriptions; the first is a universal framework and can be found at settings > general > accessibility > Audio Descriptions and the second is a parameter that affects the movie playing, it is sliding down while the movie is playing and change the language setting on the audio tab.

• Re: Factory Reset on AT200 but always ICS

  Hi all

  I bought an AT200 a few months ago and updated to ICS a few weeks ago. I did a factory reset today and after that ICS is always running on my tablet.

  I thought after resetting my device it will be Android 2.3 race as he did after that I bought it, or am I wrong?

  Hello

  Resetting the data does not change the system software that you are running.
  He re - installs all simply what you have on your device "fresh."
  So, if you had ICS and a data factory reset you would just again a new installation of ICS.

• Error ID MOTOBLUR after factory reset

  Hello

  My phone has for the past month, get really laggy so I thought that I would like to format the SD card and do a factory reset.

  When the phone has rebooted, I had to go through the usual configuration of Motoblur.

  He asked for my ID Motoblur (email address) and password so I went to the same email address, I registered here and the same password but the phone came back with the message that the ID did not exist. I tried to retype everything to make sure that I had not bad entered, but it still doesn't work.

  Frustrated I tried to create a new ID using the same email address and password and told me that I couldn't create it because the ID already existed...

  What is going on???

  I jumped the Motoblur configuration for now but would be grateful for the help to resolve it, then I can access to the service, so I paid. I noticed that some other owners also have questions of Motoblur.

  Don't tell me that Motorola has canned the Motoblur service...?

  Could you send me a private message with the IMEI of your phone and the e-mail address used to MotoBlur?

• HP ENVY 17 Notebook PC: Can't activate Windows 8 Pro after a factory reset (hard drive reformatted).

  Hello:

  I had to make a drastic clean the C drive of my ENVY 17 laptop and did a Factory Reset. I was able to reload Windows 8 Pro to my USB stick recovery.

  However, Windows 8 Pro cannot be reactivated indicating that the product key is invalid or blocked. I understand that this is due to having the OS completely cleaned and formatted drive.

  My questions are:

  1. Will be the HP (which is available on order) recovery disks be able to help solve the situation described above?
  2. It will allow me to reactivate my Windows 8 Pro?
  3. Will the recovery be HP discs/media contain or are marked with the correct Windows product key?

  Thank you

  Rico.

  Solved! HP technical support took care of me Thank you so much.

• Lenovo G50 factory reset - 80 questions

  I have a laptop G50-80, which has been upgraded to Win10 quite earlier. Recently he started having trouble with hardware and software that worked no longer works. I decided to use the reset option factory to return the system to Win8.1.

  Before doing so I downloaded the more critical of my files from the user to a Cloud Computing service and created a recovery image of windows on a SSD connecterd external via USB. I also created a system restore CD.

  Once I felt, it was safe, I pushed the button and started the factory reset. It has worked flawlessly, the system came in Win8.1. However, the files that I had uploaded to the cloud is not fully spread, and I needed to restore the image of Win10 to get back them.

  After several attempts to get the Win10 upgraded to work, I finally got to Win10 boot and restore the image of the SSD system. I found the files and was more securely save for later access. Now, I had to perform a factory reset more to return the system to Win8.1. But operations to do so led to restart the system for the installation of Win8.1. He was not able to start the factory reset.

  Some reading on the internet indicates that if the HD partitions are written in software other than the Lenovo OneKey tools that any attempt to use the partitions of the factory to do a reset would fail with the symptoms that I saw.

  Using the Win10 disk management tool, I see that there are 6 partitions on my hard drive. They are called "Recovery Partition", "EFI System Partition", "OEM Partition", "C:", "D:", and "recovery Partition". I don't see anything on the first 3 or last one of them. It doesn't seem to be a file system to set up, so I don't know if the data has been preserved.

  Is there something I can do to recover the factory software reset so I can restore this system to Win8.1?

  You may need more information to help. I'll be happy to provide all that you think you have need. Let me know.

  Vince

  I found an answer that seems to work for me. I am currently at 12%, restore the factory settings. Check out the instructions here:

  https://forums.Lenovo.com/T5/Lenovo-beacon-stick-300-D-J-and/Windows-8-recovery-partition-not-recogn...

  After the execution of these instructions, the novo button does not. From the Lenovo OneKey app doesn't. I had to reboot to factory settings using the windows restore utilities. Before running these instructions, the third partition of the provided factory restore option was not available. This time it was and the restoration continues.

  If I don't come back and say otherwise, assume the success!

  Vince (13% now)

• My macbook pro was factory reset and now it lights up with flashing? And when I go beyond that to choose the network but I can't go beyond that

  My Mac Pro was factory reset now it is coming with flashing? And when if and when I passed it will choose the network and I can't go beyond what I'm doing

  The flashing? the Mac is to tell you that it is unable to produce a valid system for starting.

  Try to make a recovery of the internet start-up as described in OS X: on OS X Recovery - Apple Support

  Looks like your hard drive is dead.

  I hope that you have a backup.

• My Apple TV remote 3rd generation A1294 doesn't aluminum A1394 does not work properly, the battery is and I have tried all the resets including factory reset.

  My Apple TV remote 3rd generation A1294 aluminium does not work properly, battery is good, and I tried all the resets including factory reset. the battery compartment is clean.

  You don't say what you mean by not working not properly, however...

  Your Apple TV can become affiliated with another remote control. Hold the remote control close to and pointed on the Apple TV, press and hold the menu and rewind buttons together for 6 seconds or until you see an icon of the chain broken on screen.

• Factory reset and no password

  Is it possible to do a factory reset on an Iphone and don't know the apple ID or password?

  N °

  It sounds as if your iPhone is locked in Activation.  Contact the previous owner, or return the iPhone If you can.

  Find my iPhone Activation Lock - Apple Support

• I have my 5 factory reset iPhone, now I can't set up my iPhone because it must be enabled, and I don't have a sim card. Can someone help me please?

  I have my 5 factory reset iPhone, now I can't set up my iPhone because it must be enabled, and I don't have a sim card to make. Is there a way I can install and use my iPhone without needing to be activated? Can someone help me please?

  To skip the activation of sim card, you can use iTunes if you have a CDMA iPhone. However, if you have a GSM model you will need to insert a sim card to activate your iPhone (it can even be used/inactive). Here is an article that will help you determine if your iPhone is GSM or CDMA: http://osxdaily.com/2012/11/15/determine-iphone-gsm-or-cdma/

• someone did factory reset on me and I got iMovie and GarageBand, and I had to make a new account that dosent iMovie and GarageBand (I got them with the laptop) is there any way I can get back them? A response would be appreciated

  someone did factory reset on me and I got iMovie and garage band, now I had to make a new account and that dosent just iMovie and GarageBand is there any chance I can get back my account?

  The Apple ID, you saved your Mac with, is the Apple which has all the applications provided with the Mac ID. By creating a new Apple ID, you can buy Apps. I know, I have two Apple ID myself. It is very important to know your Apple that you used for the registration ID, install and download all your apps in the App Store.

  Bravo!

• My iphone 6 has no service and always looking. WiFi works, sprint is not sure what is wrong with it. no damage ever to the phone. factory reset did not fix the it. Please advise?

  I need to know if I have a network problem or a hardware problem? My iphone 6 does not service and always looking, the wifi works. Phone has never been damaged. Sprint can't fix it, they think that its hardware problem. Factory reset did not work. Please advise?

  isoldier86 wrote:

  I need to know if I have a network problem or a hardware problem? My iphone 6 does not service and always looking, the wifi works. Phone has never been damaged. Sprint can't fix it, they think that its hardware problem. Factory reset did not work. Please advise?

  Get help with hardware features on your iPhone, iPad and iPod touch - Apple Support

• Satellite L750-115 and Factory Reset

  Hello, I watch/read thousand video's / forums on how to factory reset in the Toshiba Satellite L750-115. Everywhere I found that "press 0 during startup. But it didn't work for me. When I try to get help from the toshiba Web site, I can still get my cell phone.

  If anyone can help me, it will be very nice...

  In General, you have two options:
  You would use HARD drive recovery option to recover the computer laptop back to settings factory, or you must use the recovery Toshiba (disk or USB) media which must be created using the Toshiba recovery media creator software.

  But this means of communication should be established as long as the laptop works properly...

  Have you created this support in the past?
  If this isn't the case, you can use the option of recovery of HARD drive, BUT ONLY if the HARD drive and partitions are not affected!

  I guess that Windows 7 is pre-installed on your laptop.
  Well, in this case power unit, then press F8
  Then you should get the advanced boot menu... Choose here: fix my computer...
  Then Toshiba HDD recovery.

  If this is not possible, drive HARD recovery is not possible and the only way of recovering the laptop is the use of the recovery disk...
  As mentioned, if you do not have the disk, you can try ordering this support here:
  http://backupmedia.Toshiba.EU/

• Satellite U400 and factory reset

  I'm having a problem regarding my HDD RECOVERY, which is not present in any option when I try to factory reset, no assistants or something...

  Here are some photos of HARD drive recovery, and as you can see the disk RECOVERY file HARD is in E (4 GB).

  http://s1301.Photobucket.com/user/louiemnb/media/1_zps13fda4d4.jpg.html

  Here is the picture of my computer management where you can find my recovery partition... uh when I try the F12 thing, there was recovery options the other 2 HARD drive but when I click on the HARD drive option, his does not.

  http://s1301.Photobucket.com/user/louiemnb/media/2_zps593ec16a.jpg.html

  Hello

  On this older machine there is not some sort of recovery partition. Recovery image is recorded on the second partition of HARD drive in the folder called HDDRecovery.
  Recovery image installation can be started as described on-
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R02.htm

  Start your laptop using F8. S repair your computer option available or not?