Question about the clickable license in the deployment of a package of *.exe

Similar Questions

• question about the deployment of the agent / agent.properties

  Hello
  
  I need to create a simplified agent deployment mechanism.
  Basically, I'm in an environment of the seller.
  I don't have access to the entire area where the agent must be installed and I can't use ssh / key mechanism.
  But still I want to reduce human intervention to a minimum.
  
  So I created my own tgz, including an agent.properites.
  agent.setup.camIP = x.x.x.x
  agent.setup.camSSLPort = 7443
  agent.setup.camSecure = yes
  agent.setup.camLogin = hqadmin
  agent.setup.camPword = xxxxxxxx
  agent.setup.agentIP = * default *.
  agent.setup.agentPort = * default *.
  agent.setup.resetupTokens = yes
  
  Please note that I've changed resetupTokensto Yes.
  
  But that's what I'm not sure. It seems to work. install the tgz and just run the script initialization and everything good, but will be him renegotiate a new token each time?
  
  Is it possible to have a sort of pre generated token that I could integrate into the tgz?
  tell genereate the token on the server and then copy it in everywhere wherever he goes?
  
  Thank you
  Ben

  Hey Ben,

  I'm a new technical writer Hyperic. I work on documentation of installation/configuration of new or improved and scouring the user forum so I can understand what lack us in the current literature.

  Don't know if this will help, but here is my understanding of the mechanism of token.

  The token is generated the first time that the Agent starts, regardless of the setting of agent.setup.resetupTokens.   Setting and let this property to 'Yes' will cause a new token to be generated whenever the Agent is started.  It would be useful if, for some reason, a token got corrupted or deleted.

  I'm not aware of any way to manually generate a token.

  There is a doc page that attempts to address about reducing the user intervention required for the deployment of the agent here: http://support.hyperic.com/display/DOC/HQ+Agent+Deployment. I did not approve this content yet, so consider it "FWIW.

• I have a question about the license.

  Hi , I have a question about the license.

  I'm going to play a game online non-commercial (real property services). And I'll use an Adobe Photoshop to make a picture. In this case, can I use single license (non-commercial)? If there is no problem, is it normal that I have use a student permit? Just for non-commercial and not business.

  
  

  Thank you.
  

  Yes, it's fine.

  You can even use a student for commercial work permit to make money while you are studying...

• A few questions about the video conference via the public network

  Hi all

  I have a few questions that need your help:

  1. normally, I connect endpoints to MCU via local network (extended WAN) so everything is OK. But if I want to connect to the MCU via the public network (e.g. Internet FTTH), am I any equipment more or MCU settings? Need video firewall option?

  2 Cisco Telepresence does support VPN for remote endpoint to join video conference?

  Thank you

  Hi yours!

  (1) If you are looking in the connectivity, I would recommend that you speak to someone in sales of cisco (partner)

  to tell you a little more about the deployment of VCS-E and VCS - C.

  You need something to do good firewall/nat traversal, not only for the nat in your organization,

  but also for remote users with endpoints behind a nat home router,...

  (2) the endpoints and the infrastructure do not have a vpn client, but you can of course use VPN router between the two.

  But you should know that the video uses a certain packets per second and bandwidth so the vpn router could

  in trouble and a vpn also adds the overhead rate ip then you have MTU problems.

  But yes, I saw people using Cisco Telepresence via VPN.

  Yours: Please note the answers using the stars below!

• A question about the virtual processors in the prompt

  Dear Sir

  I have a general question about the number of virtual processors in the guest system.

  I use VMware ESXi 4.0.

  Say if my physical host has only 2 cups carrots (with or without HT should be the same), then is - it true that I can only attribute 2 virtual processors per virtual machine?

  Is it possible to give 4, 8 virtual processors in virtual machines?

  In my drop down menu I can NOT choose more than 2 virtual processors per virtual machine, I want to just make sure that it is not the problem of license.

  Thank you very much.

  Nanfang

  Hi Nanfang,

  linanfang wrote:

  So the general rule is the number of vcpus don't CAN NEVER exceed the number of physical processors. Is this correct?

  Replace "physical cpu" by "physical cores" and you are right, because a vCPU is mapped to a kernel. For example, you can assign 4 vCPU with a Quad-Core processor.

  If you think about it, it makes perfect sense. If you would be able to map 2 vCPU to the base, the vCPUs had to wait for them all the time because the physical kernel can simply perform an action at a time, why you would decrease the performance of your virtual machine by setting 2 vCPUs.

  It is not changed in vSphere 5.

  Concerning

• Question about the need to connect every 30 days...

  I understand the need for CC programs to connect to license Adobe servers, every 30 days (or it's 99, since I have an annual license?) of re - check license status.  That said, I have a question about the timing of these connections the licence renewal.

  What happens if I happen to be disconnected so far here 30?

  With the help of Microsoft for example...  I need Visual Studio to reactivate my developers license every 30 days in order for me to develop applications Windows 8 'metro '.  If I happen to be disconnected so far here 30, I am unable to work on any apps 'metro' until I got online.  (And I don't see any way to tell him to reactivate at the beginning).

  What happens with Adobe CC?

  Suppose I have license, and I am online for 29 days.  Then, the 30th day, I find myself be in offline mode when I start one of the programs of CC.  Now what?  Does the 30-day clock 'reset' every now and then during this time, or is it really only try every 30 days, and I have to be online on that day?

  Hi kenbrody,

  Please see the thread: http://forums.adobe.com/thread/1190831 .

  Kind regards

  Romit Sinha

• Question about the database to use with ESX and Labmanager

  Hello

  Finally my company is buying a permit for Labmanager and ESX server using Labmanager to our tests.

  We had a question about the database that we use for the actual installation.

  Could we use MY - SQL? Or that we have the olbigation to install a SQL or Oracle DB for the whole system to work?

  We prefer to use MY_SQL because it is open-source and will cost less to use for us.

  Thanks in advance for the answer and please excuse my bad English, I'm french spoke first.

  Lafa91

  Montreal.

  Lab Manager installs SQL Express as part of the installation and use. If you install also Virtual Center as part of your deployment of Lab Manager (do not use an existing VC server), you can use the database SQL Express is included for small installations of ESX, but MY SQL is not an option. You can search the databases supported in the installation guide for what version you deploy.

• Question about the purchase of policies in China for commercial purposes

  I have several questions about the purchase of policies. Our company is in CHINA

  1. we have our own product which has LCD display to display certain information with different languages (Chinese, English, German, French, Italian, Spanish, Portuguese and Russian). We need to use Adobe Heiti Std fonts for the Chinese language by commercial purposes. I tried this font in Adobe? Do Folio police 11.1, but is not in this library, your partner gold in China told me this font is part of Adobe Production Premium CS5.5, which we have already purchased from Adobe, it is used freely by the user.

  It is true that we can use the fonts Adobe Heiti Std freely and even for commercial purposes in many products?

  If this font is not free, how can I buy it for commercial purposes in many products? Could be he you pls tell me the person/company contact email or phone number.

  2. we need to use Eurostile LT font for the English language by commercial purposes as well. Is it Eurostile LT available for German, French, Italian, Spanish, Portuguese and Russian as well? and I can not find do Folio 11.1 as well. But some Eurostile Std * fonts appear in the list.

  Use font Eurostile LT? freely for user

  The police in the Adobe product package, but it is not in the Adobe typotheque (Adobe? Do Folio 11.1), then it can be used freely even for commercial purposes in many products?

  Thank you in advance.

  Unfortunately, none of these fonts is available for the user interface of the product. Although Adobe has two of them, we have not the right to sell OEM licenses or the other.

• A few questions about the difference between the Satellite P70, L70, S70

  Hello, I have a lot of questions about the P70, L70, S70 series that come with a 1920 x 1080 panel.

  (1) what are the differences between the L70 and S70 series? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

  (2) P70, L70, S70 doesn't support a 2nd HARD drive or it's just the P70 series that support?

  (3) all the three (P70, L70, S70 series) come with the same TFT panels?

  (4) of the above series, which supports mSata?

  (5) all the model of each series are delivered with support from mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?

  (6) all the foregoing, are delivered with a S - ATA II or III S - ATA interface?

  (7) who is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.

  Thank you in advance.

  > (1) what are the differences between the series L70 and S70? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

  What models Sat L70 and S70 do you mean exactly? There are different L70-xxx-xxx and S70 models on the market that supports different hardware specifications.

  (> S70 2) P70, L70, support a 2nd drive HARD or is - it just the series P70 that support?
  As you can see in this [Sam P70 HDD replacement document, | http://aps2.toshiba-tro.de/kb0/CRU3903II0000R01.htm] the P70 series supports the 2nd drive Bay HARD, BUT even if there is a 2nd HARD drive Bay, this does not mean that you can use the 2nd HARD drive. In the case where the 2nd HARD drive Bay are equipped with HARD drive connector, you can use the 2nd HARD drive

  I also found the [Sam L70/S70 HDD replacement | http://aps2.toshiba-tro.de/kb0/CRU3703HG0000R01.htm] the document on the Toshiba page and there I see this 2nd HARD drive Bay is not available

  (> 3) all three (P70, L70, S70 series) come with the same TFT panels?
  See point 1). Different P70, L70, S70 models were equipped with different material parts.

  (> 4) of the series above, which takes in charge mSata?
  As far as I know that some P70 models are equipped with an mSATA SSD of 256 GB.

  (> 5) do all the model of each series are delivered with support mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?
  See point 4) not all models supports the same hardware specifications

  (> 6) all of the above, come with a S - ATA II or III S - ATA interface?
  I don t think that SATA III is supported. I guess it would be SATA II

  (> 7) which is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.
  Not easy to answer because there are too many models released in Europea.
  And not all models are available in each country. So I guess you will have to look for the models that have been released in your country.

• A few questions about the upgrade on Satellite A300-144

  Sorry for the typos, English is not my mother tongue.
  I want to ask some questions about the upgrade of a300-144.

  * Some info first.*

  CPU: T2370 ([http://ark.intel.com/products/34445/Intel-Pentium-Processor-T2370-1M-Cache-1_73-GHz-533-MHz-FSB]).
  Chipset: GM965 ([http://ark.intel.com/products/29821/Intel-82GM965-Graphics-and-Memory-Controller]).

  * Questions.*

  1. my frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  2 Intel said that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?

  3 I know, taken of my CPU is μFCPGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 ([http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB]) is a compatible processor or there are some limitations in the BIOS?

  > 1. My frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  The speed of the memory is related on the material. This means that the FSB is responsible for the limitation.
  If the FSB would allow support 667 MHz then the memory would also at this speed.

  > 2. Intel says that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?
  The memory depends on the chipset. So if the chipset supports 4 GB of RAM, you should be capable of this move to 4 GB of RAM

  > 3. I know, my CPU is? FC-PGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 (http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB) will be a compatible processor or there are some limitations in the BIOS?

  It might be possible that the new processor would be fully supported by the BIOS, but in most cases it should not be a problem if the chipset would support the new processor.
  But as far as I know the upgrade of the CPU is not supported by Toshiba or any other manufacturers of portable and its your own risk to run laptop with the new processor.

• Question about the recovery partition

  Hello.

  I have a question about the recovery of HARD drive partition.

  If I do the operation to clear the hard disk option in the wizard it will remove * all * or it will keep my partition recovery in this way I can come back later. I want to know because I would like to put on a different OS.

  I know he said he would, but caution in the PDF, I found it says that on a normal recovery too (that he would remove each partition) and I'm a little confused about how the recovery actually worked.

  Thank you.

  Hey Buddy,

  To be honest I n don't know what you mean exactly with this option to erase.

  In General, Toshiba Recovery disk will wipe your entire HDD to restore factory settings correctly. This means that if you start from that disk and follow the instructions on the screen, everything will be removed.

  In addition, the recovery disk doesn t create a recovery partition. It is not available. Disk copy just the files on the second partition in folder HDDrecovery to start an installation of HARD drive recovery.

• A few questions about the Satellite A100 PSAANE

  Hi friends,

  I have a Toshiba Satellite A 100 - PSAANE with Vista Home Basic preinstalled in it.
  Now, I have a few questions... I mention below: -.

  (1) if I want to format my laptop, I need a CD to install for Vista Home basic... then I don't have this Toshiba CD when I bought the laptop. So how do? question: How can I format it?

  (2) can I change my Vista Home Basic to windows XP? I think it's much faster than this one. is it advisable?

  (3) I have a GB of RAM in the laptop. Increase the RAM? I think that my laptop has become to slow down. is it advisable?

  (4) and on my screen, everytime I try to change my profile screen to windows Classic view, my screen begins to blink. and after a while, the screen turns off. So I can't change that. I put the color scheme of windows vista only. What to do about that?

  Please help me friends. Thanks in advance.

  Kind regards
  Perkins

  Hello

  Here, a few questions about the number:

  (1) usually, you should get the Vista Toshiba Recovery DVD. If you didn t receive this DVD then you can order it here https://backupmedia.toshiba.eu/landing.aspx or you could install the disc of Microsoft Vista.

  (2) of course, you can do this. I think that Win XP drivers can be downloaded from the Toshiba driver page.

  (3) Yes, you can upgrade the RAM. For more information, see your manual or search on this forum for similar topics

  (4) maybe it s associated with the graphics driver. Check if you can update. I would recommend additional check if you are using the latest version of the BIOS

  Welcome them

• Re: Several questions about the recovery of the Satellite L750 features

  I have several questions about the recovery of Satellite L750 features available to it. Any help and answers would be useful.

  (1) when I started the laptop first, he asked me to create a recovery CD incase I need to reinstall the operating system. But he also said that he built in the recovery partition, so therefore, I have to make a recovery cd or not?

  (2) will be the recovery CD is exactly the same as the recovery on the system partition?

  (3) is the partion of CD or recovery includes all the integrated software pre-installed with the laptop?

  (4) also in the device manage management it shows watch partion recovery but it is empty, is it true?

  (5) in the second partition (drive D) system, he has a record with what looks like the recovery of files and folders. Is it safe to move/remove it?

  Hello

  I'll try to provide answers:
  1 - to ensure that everything works perfectly you don t need these discs, but if something goes wrong with the HARD drive you will not be able to do anything. When you have the recovery DVDs, you will still be able to install the recovery image and once again the factory settings. So my advice to you is: create these discs as soon as possible. Use only on DVD-R media and buy products of high quality (TDK or Verbatim).
  2 - Yes.
  3 - Yes.
  4 - No. Don t be confused with this.
  5. in a first time create restore DVD, and later you can do what you want. I put t know which files mean you but don t touch anything before that of the recovery disks to be created.

  In the past, many people have been experimenting with the structure of HARD drive and partitions and later was surprised when installing disk recovery HARD has been damaged. Don t make the same mistake.

  If you have any other questions you are welcome.

• Question about the new Yoga 10 HD +.

  Hello

  A few questions about the new Yoga 10 HD + that I hope you can answer.

  I bought the former model, last year. Love the design and long battery life, but a few major questions made me return.

  • Somewhere that I've read that it can not read NTFS on USB so I guess that's the same thing with a NTFS formatted microSD card?
  • Can it read exFAT formatted microSD cards?
  • Anyone who has questions about the audio via bluetooth?
    (I know that BT is not exactly High End HiFi but the old 10 Yoga for some obscure reason - most likely a driver problem which nobody cared to fix - rang * very * worst with visibly distortion while both my phone and a Tablet noname cheap I have zero about fidelity - any of my devices bluetooth audio) I tried aptX or not)

  So to avoid buying it back it also I really I would like to see if I can get my questions answered before buy you.

  While I love the form factor and long term issues above are only two Mayor dealbreakers for me. Bad audio quality = no joy listen to spotify, local etc. MP3s. not of NTFS or exFAT = some great movies.

  My old noname android Tablet really could use an upgrade so I'm really curious it may be, or I should watch the competition and will be form factor and battery LIFE.

  Thanks in advance.

  EDIT:

  If it does not support NTFS or exFAT on microSD card have someone at - he tried ext3 or ext4?

  I mean with Linux Android root, it should be a no-brainer to support at least when it comes to royalties unlike NTFS or exFAT where it * might * have some trouble with Microsoft.

  I used a USB through a USB OTG cable. NTFS or exFAT have been recognized by the Tablet PC. FAT32 is seems to be the preference.

• I have a question about the time machine. I recently updated my Quicken 2015 and there was something wrong with the update. Can I go back in just the Quicken file and restore it until I downloaded the update do I have to restore the entire

  I have a question about the time machine. I recently updated my Quicken 2015 and there was something wrong with the update. Can I come back in all the Quicken file and restore from time Machine before I downloaded the update to do, I need to restore the entire computer?

  Yes, you can just restore this file or application. Use Time Machine to back up or restore your Mac - Apple Support