Question about the configuration of wireless networks

Similar Questions

• Questions about the configuration of the cache for use with partitioned off-lot...

  Once more, I give it a try to see if we can make use of the new partitioned (split) off-heap storage and are having problems with the configuration of the cache (including configuration files).
  
  The problems that I had, it seems that < high > units should be specified for the entire cluster (or perhaps for a node? not sure yet!) while < original-size > & < size > is specified by partition. Is this correct? That's the way it was intended (for me it would have seemed more logical to also specify < high-units > per partition since I guess overflow checking and expulsion is made by partition)? The way I read the documentation, it seems that all three should be per partition if < partitioned > true < / partitioned > is specified.
  If I value < > 1 mb high-units (as i belive I should if it was per partition) I get the impression that I posted in a previous question (a message to info on some missing index data, then the crash of nodes in cluster with some of out of memory error).
  
  / Magnus
  

  <?xml version="1.0"?>
  <!DOCTYPE cache-config SYSTEM "cache-config.dtd">
  
  <cache-config>
      <caching-scheme-mapping>
          <cache-mapping>
              <cache-name>ObjCache</cache-name>
              <scheme-name>off-heap-near</scheme-name>
              <init-params>
                  <init-param>
                      <param-name>front-size</param-name>
                      <param-value>200000</param-value>
                  </init-param>
              </init-params>
          </cache-mapping>
      </caching-scheme-mapping>
  
      <caching-schemes>
          <near-scheme>
              <scheme-name>off-heap-near</scheme-name>
              <front-scheme>
                  <local-scheme>
                      <high-units>{front-size}</high-units>
                  </local-scheme>
              </front-scheme>
              <back-scheme>
                  <distributed-scheme>
                      <service-name>PartitionedOffHeap</service-name>
                      <backup-count>1</backup-count>
                      <thread-count>4</thread-count>
                      <partition-count>127</partition-count>
                      <backing-map-scheme>
                                <partitioned>true</partitioned>
                            <external-scheme>
                                  <nio-memory-manager>
                                     <initial-size>1m</initial-size> <!-- PER PARTITION?! -->
                                     <maximum-size>1m</maximum-size> <!-- PER PARTITION?! -->
                                  </nio-memory-manager>
                                  <unit-calculator>BINARY</unit-calculator>
                                  <high-units>127m</high-units> <!-- PER PARTITION/NODE/CLUSTER?????? -->
                           </external-scheme>
                      </backing-map-scheme>
                      <backup-storage>
                      <!-- PARTITIONED BY DEFAULT?! -->
                          <type>off-heap</type>     
                      <initial-size>1m</initial-size> <!-- PER PARTITION?! -->
                      <maximum-size>1m</maximum-size> <!-- PER PARTITION?! -->
                      </backup-storage>
                      <autostart>true</autostart>
                  </distributed-scheme>
              </back-scheme>
              <autostart>true</autostart>
          </near-scheme>
      </caching-schemes>
  </cache-config>

  Sorry, my description is very confusing. High units is by cache. What I was trying to say, is that cache mapping can train additional units high to affect the memory required by the node. Since multiple caches can map to the same pattern, especially if you use wildcards in the mapping, you must consider the total number of hidden units of high times. It is true or not caches use different services.

  You are also right about high units, applying to the partitioned support cards. You could have easily expulsion are happening as you describe. We must take another look at the configuration because it is too easy to make a mistake.

  As expected, the allocation of card support splitting is lazy to avoid the problem you described. The worst case situation, I was trying to explain can occur if you have caused all buffers to be allocated based on the data before all other nodes could take some of the partitions.

  Kind regards

  David

• Question about the configuration of virtual computer file and the working VM location

  I noticed one of my virtual machines had two data warehouses listed under "Items" in the vSphere Client.

  After some research autour, I found the virtual machine files are in the correct data store, but the 'VM-configuration file' and 'Place of work VM' are in another data store.

  Can I combine all in the same database?   I'd rather have the config and the workplace on ma who has a lot of main storage.  For some reason, the configuration file and the location of work were created on a local storage on my host.

  Any suggestions?

  Thank you

  David Moore

  You can use Storage vMotion to migrate only the virtual machine configuration file to the desired location, just start the wizard of vMotion and storage step 'Select the data store', click Advanced, and you will see the option to select a new destination for the configuration file data store.

• HP Officejet Pro 8500 A909a USB 3 questions about the configuration of the network - port USB3 problem

  Fujitsu Windows 7 laptop (all USB2)

  used the full software and installed a printer HP Officejet Pro 8500 A909a Series as a network printer.

  The printer installed fine and don't have USB connection

  All the software and scanning twain installed, so I was able to scan the copy etc.

  I could browse and choose my PC from the front panel of the printer

  However, it was Tuesday confirmed to a friend that their printer would work on a new laptop - bought the laptop

  Fujitsu - but more recent model with 3 USB ports

  I have install and then used the same FULL configured driver to be installed (V14)

  selected as a network printer and then, during the installation, I get an error hardware error USB and USB drivers

  All the USB works, that I've used - BUT the printer is networked and no USB used

  tried to download the driver and install it-exactly the same question

  SO I configure using the devices and printers 'add printer' network and installed

  I can print OK

  BUT no analysis facilities

  and on the façade - cannot see the new PC to scan to

  The only real difference, is that this PC has USB3 and only mine has USB2

  DO not know why on a network installation USB even when searching for

  It's a problem because Drivet package not has not been updated for USB3 - y at - it a patch?

  Thanks for any help / advice

  Hi etaf,.

  I guess the short answer is: Yes, the problem with the software and the 3.0 Port.

  The long answer with a possible work around is as follows: first of all, the software looks for minimum requirements. Because the software is older, he doesn't know what a 3.0 port. You are right when you say that it should work since you do not use the USB and use wireless instead, but this is not the case.

  There is something we can try, but I can't guarantee it will work. I thought first we could connect a USB cable and run the software made to force the software to see the USB port, but then the software wouldn't even get far enough because you can't plug the cable to the most later in the installation.

  My second thought and most promising suggestion is to connect the USB cable (although we do normally not until the software prompts us to) and use the installation wizard HP Print to get the insteaad of software to use the CD or download from the printer driver page. Still, I can't say with certainty that it works, but I don't see why it would not be worth a try.

  If it works, and we get the software installed you can convert the USB connection to a wireless connection using the software. Fingers crossed! Download and run the with the following link. Printer HP install wizard for Windows

  If this does not work, or you don't want to bother with it (not worth trying), I might consider getting a new model of the printer. You can even call HP. They might be able to offer a discount on a newer model. If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

• Questions about the allocation of multiple NETWORK cards in a machine virtual Windows XP Machine HOST/NAT or bridged?

  Hi all

  That is the situation. We have a Machine physics WindowsXP with 5 CARDS, all with static IP. Only be connected to the internal network without physical Internet connection is used.

  Map NETWORK 1 has a 10.34.78.241/255.255.255.0 IP Gateway 10.34.78.2

  Map NETWORK 2 has an IP 192.168.22.242/255.255.255.0

  Map NETWORK 3 has a 192.168.100.241/255.255.255.0 IP

  Map NETWORK 4 has an IP 172.27.254.240/255.255.0.0

  5 NIC has an IP 192.168.242.10/255.255.255.252

  I used VMWare Converter Standalone to do a P2V PC, which works well with the latest version of VMWare Workstation. All were brought to the course successfully. The virtual machine has 5 Networksas by the XP Machine of origin.

  I built a Win7 Machine with 5 physical NETWORK interface cards, I suppose to replicate the Windows original XP Machine, I need configure the static IP address of the new NICs as shown above and configure cards NETWORK the VM 5 HOST mode and use the virtual network Editor

  to adapt the VMS NICS? Or is there a better way to do it?

  Cheers for any help and advice that can be provided...

  If I'm wrong, you should be able to create a Bridged (vmnet) network for each physical card. Make sure that one (which is created by default) is mapped to a physical NIC dedicated rather than automatic.

  André

• Question about the configuration of Netbackup

  DB version: 11.2
  Operating system platform: AIX 6.1
  NetBackup version: 7
  
  I need to configure RMAN backups on tape for my Production DB using netbackup as the MML. The given statement was
  

  Shutdown all DBs running from this Oracle Home        # Missed this step
  cd $ORACLE_HOME/lib
  ls -lrt libobk.a                                                                                 
  ln -s /usr/openv/netbackup/bin/libobk.a64 libobk.a
  Start all DBs

  I did all the steps above except knock down DB linking this ORACLE_HOME. I even tested backup of the control of the band successfully file after creating symbolic link. Tonight at off-peak hours I will run the full backup DB. There will be no problem because the DB is not bounced? I can't test it now that it's production.

  Hello

  did all the steps above except knock down DB linking this ORACLE_HOME...
  There will be no problem because the DB is not bounced?

  Don't worry, the installation of MML and link building can be made without stop since Oracle 9i running instances.
  From:
  http://docs.Oracle.com/CD/B10500_01/server.920/a96566/rcmconfg.htm#453248

  You don't need to start or stop the instance during the installation of the management of the media library.

  You seem to be on 11 GR 2, then everything should work properly.

  I can't test it now that it's production

  Do the backup will now generate additional I/O now as well...
  Kind regards
  Tycho

• Questions about the configuration of libraries of ASM Database 11 GR 2 under VM

  People,
  
  Hello. I install the Oracle 11 g RAC 2 system with 2 Virtual Machines (rac1 and rac2 - Oracle Linux 5.6) on top of VMPlayer.
  
  I'm libraries ASM on rac1 configuration using the command: oracleasm # [root@rac1 dev] configure-i
  
  But this message appears: "Command not found."
  
  I can't find the directory where the "oracleasm. Any folk can help solve the problem?
  
  Thanks in advance.

  PL don't post duplicate Oracle Database 11 g RAC 2 - configure the libraries of ASM on VM

• I have several questions about the configuration of Windows Media Player XP

  original title: subtitle in WMM as subtitle

  Hi, I use windows XP and when you use WMM under XP, I want that

  • legend is placed as the subtitle to the picture or just scrolling out of bottom right below on the left.
  • How can second thing, I change background for title slides
  • Third legend fonts
  • I can add some animation while going for tranmission

  Hello

  1. what version of Windows Movie Maker is installed on your computer?

  You want to return these items to help.

  Publish a movie in Windows Movie Maker
  Change Windows Movie Maker advanced settings

  Note: The items above are for Vista, but they are also applicable for XP.

• Basic question on the configuration of the OVD

  Hi gurus
  I have a basic question about the configuration of the TPM. I have all the "employees" in Active Directory and 'Employees + external users' in OID. The employee user password is maintained in AD, while the same for the external user is maintained in OID.
  
  Query:
  I need to configure authentication for an application for the employees present in the AD and present external users in OID. I have to join the profiles of employees present in AD and OID. Even if the employees are present in the OID, I don't want to configure for authentication of the OAM.
  
  How can I implement this using OAM and OVD.

  I got your condition.

  You said that OID contains external users as well as employees. You manage a container separated for employees in OID. If so, you job would be easy. If there is no container separated for employees on the OID and storing all users (employees and external users) in the same container (default: cn = Users, dc = xxx, dc is com) then you can get the list of AD users only with the following ldapsearch command:

  ldapsearch h Pei d 'cn = sleep '' w sub s b '' 'objectclass = user' SamAccountName

  Create three adapters OVD:

  1 adapter used (this should point to Active Directory)

  2. users adapter (when creating this, you have to exclude users AD, just similar to find the above option).

  3 create the adapter to store as the clubs above two adapters.

  Now, OAM should talk to store adapter.

  I hope this helps.

  Thank you
  GK

  Published by: GK Goalla on October 3, 2012 12:34

• "Use Windows to configure my wireless network. is missing

  Hello:

  There is NO connection of Belkin Wireless adapter flashes to pick up the signal.

  Whenever there is no link, I need click Belkins utility in the system tray at the bottom to obtain, however, it keeps not connected and takes only 10-20 minutes.

  Moreover, I found when I clicked, Belkin icon > properties > network and found there is no "use Windows to configure my wireless network.

  How do I fix this problem?

  Thank you for your help in advance.

  Hello

  I suggest to follow the steps in the below links and let them know the State of the question.

  Wireless and wired network problems:

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  To set up automatic wireless network configuration:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

  For more information:

  Follow the steps in the link to configure the adapter Belkin Wireless below:

  http://www.Belkin.com/support/DL/p75451_f5d8053.PDF

  If the problem persists, then I suggest you to contact the Belkin Support:

  http://www.Belkin.com/us/support

  I hope that the information above helps you.

  
  

• HP Deskjet 3830: Have repeatedly reset the printer's wireless network settings

  When I did a WiFi from my laptop to my Deskjet 3830, I does not specify the need for a password, but then when I came back the next day he asked my password (and refused to accept my normal netwrk password).

  I posted the question here, and someone told me to reset the settings of wireless network printer, who worked. But after a while, he returned to ask me the password and I have to reset again!

  How to avoid this problem?

  Greetings @peterB66,

  Thank you access the Forums from HP Support for extra support! I see you want to know how to stop the printer on an intermittent basis provide the password. I will do my best to help you with this problem.

  I suggest updating the firmware of the printer to see if it will help: DJ3830_R1604C.exe

  I'll send you another step to try in a private message.
  In the forum next to your handle name simply click on the envelope to see.

  If this helps you to find a solution, please click on the button "accept as a Solution. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos. Please let me know the results. Good day!

• Issues with Dell desktop computer wireless and D-Link wireless network card. Only able to get wireless access by checking "Use Windows to configure my wireless network". This kind of file sharing impossible.

  original title: can't see the computer on wireless internet!

  I hope that's not too much detail, but I would like that the sequence of events to be clear...

  I have a Dell desktop computer that's probably six or seven years now.  It did not come with a wireless card, so I bought a DLink router and combo card wireless, install both with the DLink software.  It works beautifully.

  Later, we through my rep AT & T DSL, I got a Motorola modem/router with wireless capabilities.  I had plugged directly on my computer Dell desktop and moved to a Dell laptop DLink wireless receiver.  No problems.

  The Dell laptop is dead and the DLink receiver has not been used for a long time.  Family of my daughter moved to our place, and I have connected his desktop computers and laptop to wireless internet, using the Windows Connection Wizard.  Still no problem.

  I got a new ASUS laptop, I also linked using the Windows Wizard.  STILL no problem.

  Now, here's the problem comes.  I moved the Dell desktop computer, connected the DLink wireless receiver to it and I am able to get wireless access ONLY when I go into the properties of PC, click the wireless networks tab and check the "use Windows to configure my wireless network" box.  Then I can connect correctly, but I don't see this computer on my wireless network.  Bad luck... because I want to be able to access share files.  When I try to connect using different assistants of Windows, I get a message to the effect that, if I used another software to connect to the program, I can't use the Windows Wizard.

  So, what can I do to remove the original configuration of DLink completely and to connect to my wireless network using the wizards in Windows?  I uninstalled the software of DLink, but it seems to have no effect at all.

  BTW, Dell desktop computer is running XP, office computer of my daughter is running VISTA, and two laptops are equipped with Windows 7.  I can see all the computers on the network with the exception of the original Dell desktop computer wireless.

  Any help would be appreciated!

  Hi Joe and DonnaLoth,

  The network will have to be changed to allow the computer Windows XP join a workgroup.

  How to change a computer name, join a domain, and add a computer description in Windows XP or Windows Server 2003

  You can also read the following article.

  Networking of computers running different versions of Windows

• Ask questions about the functionality of EA8500 MU-MIMO

  Dear Linksys

  I bought EA8500, and it arrived today.

  I have two questions about the functionality of MU-MIMO of EA8500 AP.

  1. I want to compare the performance between SU-MIMO and MU-MIMO, but there is no option to control this feature in the router admin page. Is that one of the possible ways?

  2 EA8500 supports 1733 Mbps wireless speed, but it resembles the speed of 1 Gbps ethernet cable.

  This router supports really speed 1 Gbps ethernet? or y at - it an option to support more throughput as the aggregation of links?

  Thank you

  Hi, hyeonu. For your first query, it is not possible because there is no option to disable the feature of MU-MIMO on your Linksys EA8500 router. In addition, with regard to your second, you can get a higher throughput of 1 Gbps since this is the maximum capacity of your ethernet connection.

• Question about the differences in commands

  Hey guys -.

  I just had a few questions about the differences between orders that seem to perform the same function.  Can you let me know if an order is more preferable to the other and what the difference is.  I would really appreciate it as it I currently practice some INE laboratories and I see that orders change from lab to lab.  Thanks advance!

  1. When you write a static NAT for specific host 1 - is - this important if I understand the 32 subnet?

  EX: static (inside, outside) 1.1.1.1, 2.2.2.2 VS static (inside, outside) 1.1.1.1 2.2.2.2 netmask 255.255.255.255

  2. when I'm setting up a router as a CA server and it is necessary to "export" the key, whatever my method of exporting the key?  If so, in which method call for which solution?

  EX: key export cryptographic rsa ciscox pem URL nvram: cisco VS. exporting key 3des cryptographic ciscox pem 3des rsa terminal cisco

  3. If I have to mark a packet with a DSCP of X value, matter if I use the 'set dscp' VS 'set ip dscp?  If so, what is the difference?

  FXY

  Policy-map X

  class X

  the dscp X value

  VS

  Policy-map X

  class X

  X ip dscp value

  I guess pertaining to 2, if i was speaking in terms of from a cisco router to another cisco router - would terminal be acceptable?
  
  

  Yes, the "Import cryptographic key" command can take a url and also from the terminal entrance. In this terminal case wil is much easier.

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• The use of wireless network on Windows XP mode?

  My OS is MS.windows 7 Pro. / 32-bit. And I have already installed windows XP mode.  Right now I can access to the Wireless network & cable on window 7 mode but I can access the network only by cable on window XP mode (because the wireless adapter are not yet on the taskbar. How do I do?

  Configure Virtual PC to use the host PC wireless network adapter:

  1. turn off the Virtual PC.
  2. click on Start > all programs > Windows Virtual PC >Windows Virtual PC .
  3. right click Windows XP Mode.vmcx and click settings .
  4. click on the network .
  5. the value 2 adapter adapter wireless network from the host PC.
  6. click on OK .

  Then start the virtual machine. Boulder computer Maven
  Most Microsoft Valuable Professional