Questions about the configuration of libraries of ASM Database 11 GR 2 under VM

Similar Questions

• Questions about the configuration of the cache for use with partitioned off-lot...

  Once more, I give it a try to see if we can make use of the new partitioned (split) off-heap storage and are having problems with the configuration of the cache (including configuration files).
  
  The problems that I had, it seems that < high > units should be specified for the entire cluster (or perhaps for a node? not sure yet!) while < original-size > & < size > is specified by partition. Is this correct? That's the way it was intended (for me it would have seemed more logical to also specify < high-units > per partition since I guess overflow checking and expulsion is made by partition)? The way I read the documentation, it seems that all three should be per partition if < partitioned > true < / partitioned > is specified.
  If I value < > 1 mb high-units (as i belive I should if it was per partition) I get the impression that I posted in a previous question (a message to info on some missing index data, then the crash of nodes in cluster with some of out of memory error).
  
  / Magnus
  

  <?xml version="1.0"?>
  <!DOCTYPE cache-config SYSTEM "cache-config.dtd">
  
  <cache-config>
      <caching-scheme-mapping>
          <cache-mapping>
              <cache-name>ObjCache</cache-name>
              <scheme-name>off-heap-near</scheme-name>
              <init-params>
                  <init-param>
                      <param-name>front-size</param-name>
                      <param-value>200000</param-value>
                  </init-param>
              </init-params>
          </cache-mapping>
      </caching-scheme-mapping>
  
      <caching-schemes>
          <near-scheme>
              <scheme-name>off-heap-near</scheme-name>
              <front-scheme>
                  <local-scheme>
                      <high-units>{front-size}</high-units>
                  </local-scheme>
              </front-scheme>
              <back-scheme>
                  <distributed-scheme>
                      <service-name>PartitionedOffHeap</service-name>
                      <backup-count>1</backup-count>
                      <thread-count>4</thread-count>
                      <partition-count>127</partition-count>
                      <backing-map-scheme>
                                <partitioned>true</partitioned>
                            <external-scheme>
                                  <nio-memory-manager>
                                     <initial-size>1m</initial-size> <!-- PER PARTITION?! -->
                                     <maximum-size>1m</maximum-size> <!-- PER PARTITION?! -->
                                  </nio-memory-manager>
                                  <unit-calculator>BINARY</unit-calculator>
                                  <high-units>127m</high-units> <!-- PER PARTITION/NODE/CLUSTER?????? -->
                           </external-scheme>
                      </backing-map-scheme>
                      <backup-storage>
                      <!-- PARTITIONED BY DEFAULT?! -->
                          <type>off-heap</type>     
                      <initial-size>1m</initial-size> <!-- PER PARTITION?! -->
                      <maximum-size>1m</maximum-size> <!-- PER PARTITION?! -->
                      </backup-storage>
                      <autostart>true</autostart>
                  </distributed-scheme>
              </back-scheme>
              <autostart>true</autostart>
          </near-scheme>
      </caching-schemes>
  </cache-config>

  Sorry, my description is very confusing. High units is by cache. What I was trying to say, is that cache mapping can train additional units high to affect the memory required by the node. Since multiple caches can map to the same pattern, especially if you use wildcards in the mapping, you must consider the total number of hidden units of high times. It is true or not caches use different services.

  You are also right about high units, applying to the partitioned support cards. You could have easily expulsion are happening as you describe. We must take another look at the configuration because it is too easy to make a mistake.

  As expected, the allocation of card support splitting is lazy to avoid the problem you described. The worst case situation, I was trying to explain can occur if you have caused all buffers to be allocated based on the data before all other nodes could take some of the partitions.

  Kind regards

  David

• Question about the configuration of virtual computer file and the working VM location

  I noticed one of my virtual machines had two data warehouses listed under "Items" in the vSphere Client.

  After some research autour, I found the virtual machine files are in the correct data store, but the 'VM-configuration file' and 'Place of work VM' are in another data store.

  Can I combine all in the same database?   I'd rather have the config and the workplace on ma who has a lot of main storage.  For some reason, the configuration file and the location of work were created on a local storage on my host.

  Any suggestions?

  Thank you

  David Moore

  You can use Storage vMotion to migrate only the virtual machine configuration file to the desired location, just start the wizard of vMotion and storage step 'Select the data store', click Advanced, and you will see the option to select a new destination for the configuration file data store.

• HP Officejet Pro 8500 A909a USB 3 questions about the configuration of the network - port USB3 problem

  Fujitsu Windows 7 laptop (all USB2)

  used the full software and installed a printer HP Officejet Pro 8500 A909a Series as a network printer.

  The printer installed fine and don't have USB connection

  All the software and scanning twain installed, so I was able to scan the copy etc.

  I could browse and choose my PC from the front panel of the printer

  However, it was Tuesday confirmed to a friend that their printer would work on a new laptop - bought the laptop

  Fujitsu - but more recent model with 3 USB ports

  I have install and then used the same FULL configured driver to be installed (V14)

  selected as a network printer and then, during the installation, I get an error hardware error USB and USB drivers

  All the USB works, that I've used - BUT the printer is networked and no USB used

  tried to download the driver and install it-exactly the same question

  SO I configure using the devices and printers 'add printer' network and installed

  I can print OK

  BUT no analysis facilities

  and on the façade - cannot see the new PC to scan to

  The only real difference, is that this PC has USB3 and only mine has USB2

  DO not know why on a network installation USB even when searching for

  It's a problem because Drivet package not has not been updated for USB3 - y at - it a patch?

  Thanks for any help / advice

  Hi etaf,.

  I guess the short answer is: Yes, the problem with the software and the 3.0 Port.

  The long answer with a possible work around is as follows: first of all, the software looks for minimum requirements. Because the software is older, he doesn't know what a 3.0 port. You are right when you say that it should work since you do not use the USB and use wireless instead, but this is not the case.

  There is something we can try, but I can't guarantee it will work. I thought first we could connect a USB cable and run the software made to force the software to see the USB port, but then the software wouldn't even get far enough because you can't plug the cable to the most later in the installation.

  My second thought and most promising suggestion is to connect the USB cable (although we do normally not until the software prompts us to) and use the installation wizard HP Print to get the insteaad of software to use the CD or download from the printer driver page. Still, I can't say with certainty that it works, but I don't see why it would not be worth a try.

  If it works, and we get the software installed you can convert the USB connection to a wireless connection using the software. Fingers crossed! Download and run the with the following link. Printer HP install wizard for Windows

  If this does not work, or you don't want to bother with it (not worth trying), I might consider getting a new model of the printer. You can even call HP. They might be able to offer a discount on a newer model. If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

• Question about the configuration of Netbackup

  DB version: 11.2
  Operating system platform: AIX 6.1
  NetBackup version: 7
  
  I need to configure RMAN backups on tape for my Production DB using netbackup as the MML. The given statement was
  

  Shutdown all DBs running from this Oracle Home        # Missed this step
  cd $ORACLE_HOME/lib
  ls -lrt libobk.a                                                                                 
  ln -s /usr/openv/netbackup/bin/libobk.a64 libobk.a
  Start all DBs

  I did all the steps above except knock down DB linking this ORACLE_HOME. I even tested backup of the control of the band successfully file after creating symbolic link. Tonight at off-peak hours I will run the full backup DB. There will be no problem because the DB is not bounced? I can't test it now that it's production.

  Hello

  did all the steps above except knock down DB linking this ORACLE_HOME...
  There will be no problem because the DB is not bounced?

  Don't worry, the installation of MML and link building can be made without stop since Oracle 9i running instances.
  From:
  http://docs.Oracle.com/CD/B10500_01/server.920/a96566/rcmconfg.htm#453248

  You don't need to start or stop the instance during the installation of the management of the media library.

  You seem to be on 11 GR 2, then everything should work properly.

  I can't test it now that it's production

  Do the backup will now generate additional I/O now as well...
  Kind regards
  Tycho

• Question about the configuration of wireless networks

  I managed to set up my laptop and desktop computer to access the interest through a Belkin WLan modem router. So why can't they access each other or the printer that is attached to the office. Computers independently access the router via a wireless connection.

  The printer is connected to the desktop via the parrell port. Each are running xp home.

  Hello

  In so that they can access the printer, you must have the shared printer. Go to start-> settings-> fax and printers, then go to your printer, right click and go to share. Then share it. Now go to your cell phone and go back to the printers and Faxes page. Now click on add a printer and click on that it is connected to the network via another computer and add it to your laptop. Now it should be usable on the network. So that your computers to see each other, they will have to be interconnected, in a literal sense. Access networks and create a LAN or WLAN, first of all, the office, then the laptop. After that the two of them, they should be interconnected and see themselves. A routher is dandy, but for some reason, some computers do not always act as well as on a network up to that force you to.

• I have several questions about the configuration of Windows Media Player XP

  original title: subtitle in WMM as subtitle

  Hi, I use windows XP and when you use WMM under XP, I want that

  • legend is placed as the subtitle to the picture or just scrolling out of bottom right below on the left.
  • How can second thing, I change background for title slides
  • Third legend fonts
  • I can add some animation while going for tranmission

  Hello

  1. what version of Windows Movie Maker is installed on your computer?

  You want to return these items to help.

  Publish a movie in Windows Movie Maker
  Change Windows Movie Maker advanced settings

  Note: The items above are for Vista, but they are also applicable for XP.

• Basic question on the configuration of the OVD

  Hi gurus
  I have a basic question about the configuration of the TPM. I have all the "employees" in Active Directory and 'Employees + external users' in OID. The employee user password is maintained in AD, while the same for the external user is maintained in OID.
  
  Query:
  I need to configure authentication for an application for the employees present in the AD and present external users in OID. I have to join the profiles of employees present in AD and OID. Even if the employees are present in the OID, I don't want to configure for authentication of the OAM.
  
  How can I implement this using OAM and OVD.

  I got your condition.

  You said that OID contains external users as well as employees. You manage a container separated for employees in OID. If so, you job would be easy. If there is no container separated for employees on the OID and storing all users (employees and external users) in the same container (default: cn = Users, dc = xxx, dc is com) then you can get the list of AD users only with the following ldapsearch command:

  ldapsearch h Pei d 'cn = sleep '' w sub s b '' 'objectclass = user' SamAccountName

  Create three adapters OVD:

  1 adapter used (this should point to Active Directory)

  2. users adapter (when creating this, you have to exclude users AD, just similar to find the above option).

  3 create the adapter to store as the clubs above two adapters.

  Now, OAM should talk to store adapter.

  I hope this helps.

  Thank you
  GK

  Published by: GK Goalla on October 3, 2012 12:34

• Questions about the implementation of clusters of storage and DTS on active cluster

  I have a few questions about the implementation of clusters of data store and SRS storage in VSphere 5.1.

  We have a data center with about 15 HP blades and a few servers non-lame.  The hosts are all either VSphere 5.0 or 5.1.  Our back-end storage is an EMC VNX 5700 with about 20 stores of data.  All the VMWare is managed by VCenter 5.1 running on a dedicated physical machine.

  Currently, each data store is used individually; No piles of data store are put in place.  When a new virtual machine is created, the administrator usually chooses the data with the most space store.  Periodically, we will go back and manually storage vMotion machines to balance the load.

  Recently, we have expanded the VNX storage, so we now have LUNS in different pools, with different levels of performance.

  What I would do is set up for the data store clusters, so that us when a virtual machine is created, the administrator must not know what data store is in which pool.  Also take advantage of the DRS storage so that the burden of storage will be "refine" himself a little.

  I know the setting up of a cluster of storage in a 'clean' environment is quite simple, but my concern is creation/conversion data warehouses existing in active production in the cluster, while they are used.

  If I access the screen "data warehouses and store data from clusters ', right-click on the data center and create a cluster, and then move the various data stores in the new cluster, will there be an interruption in the production running systems?

  I also wonder about activation of storage i/o control.  It is not currently enabled on data warehouses.  I know it's useful for the StorageDRS, but will be allowing any negative impact on the system?  If I turn on the warehouses of data, is there anything else I should do or set in addition to all that allows him?

  Finally, we are in the process of Site Recovery Manager configuration.  SRS has an impact on the configuration of the data clusters and DTS store?

  Thanks in advance for your comments.

  Mike O.

  Gregg Robertson wrote:

  Hello

  Clusters of data and using DTS store doesn't impact RS even if you create a cluster of data store for storage of replicated data and another for everyone else, this way you machines virtual you want to replicate are not moved on warehouses of data that are not replicated , but will still have the ability to move if there is a conflict.

  Gregg

  With all due respect but SRM and DTS don't go together. SRM does not at all support the use of DTS. So if you are configuring SRM forget DTS for now.

  Reason for this is that SRM knows no DTS and VMs can be in flight when a failover should occur, and bad things can happen. Also, the protection breaks when a virtual computer is moved between data warehouses in a cluster data store.

  In short: don't go there.

• Consider purchase of Wacom Cintiq 27 HD Touch - Questions about the tactile feature in Photoshop and Lightroom

  I'm considering buying a 27 HD Touch of Wacom Cintiq monitor. I have a few questions about the two programs Adobe and their use of the 'touch' feature - Photoshop CS6 and Lightroom 5.7 running on Windows 7.

  1 problems related to touch a feature in Lightroom and Photoshop CS6 and 5 resolved that you see on the forums of Wacom a year ago?

  2. If so, is there sufficient value gained through the tactile feature in Photoshop CS6 and Lightroom 5 to justify the $500 price difference between the Cintiq 27 HD vs Touch HD? (I realize that this is a subjective question based on the abundance of its cash).

  3. I intend to stay with CS6 as long as possible to avoid a monthly subscription, BUT I wonder if buy the Touch HD can provide additional key features in future releases of these products that do not exist currently. (It is a pie in the kind of sky in question).

  Thank you!

  Kent

  Support for Photoshop Touch is added by CC 2014.2.2.  However as the Pro Intuos Wacom tablets with touch can be used with earlier versions of Photoshop and the Wacom Tablets Configurator can custom features can be used with Photoshop touch tablets.  I use LR but I don't know that the same thing would be true for her. You can configure the setting for many applications. The device driver knows which application its interfacing with and uses the parameter set for each...

  I have disable most of touch when using Photoshop.  The main reason why I have a Tablet is Photoshop Brush tools. Like Eraser, clone stamp, etc, nothing is better then a pen when it come to create the layer mask.  For most programs, I always use a mouse and I use the keyboard, the mouse and the pen with Photoshop...

  I never wanted a Cintig I do not have my hand between my eyes and the work. I'm not an artist.

• Questions about the stores in iProcurement

  All,
  
  I have a few questions about the implementation of iProcurement stores-
  
  1 oracle comes seeded with 2 stores "Backend" and "Exchange.Oracle.com. We do not have the use of these stores. I don't see an option to turn them off. Is it advisable to delete them? They occupy unnecessary space and are seen first. I read this on Metalink Note ID 429470.1 - "NOTE: while the value can be changed, it is highly recommended to not under any circumstances ever remove"Main store"page stores to manage content in iProcurement catalog administrator responsibility.» Do not know why.
  
  2. we have a Punchout for Dell U.S. catalog store and a catalog of information for Dell International. Buyers of Dell are iProcurement to each punchout to place their orders from Dell for the USA (shopping cart returns to iProcurement) - or - just use the store Dell International to go to an external URL and place their orders here (who do not return to iProcurement). What we see is - when the user clicks on the icon Dell us, it is taken directly to the URL of the PunchOut of Dell, but when he clicks on the Dell International icon, he was first taken to the list of catalogs available to the store (only 1 available catalog) and the user must then click again on the link Dell International. Is there a way to configure the Dell International icon to behave the way behaves in the Punchout icon - i.e. directly take the user to the Dell page without a need to show the list of catalogs.

  Hey,.
  To answer your Questions
  1. you can always delete those either if you want to... The reason why the link Meta Notes say not only not to delete the main store is
  i. because main store has all of the Local content in iProcurement (i.e. If you have any installation of items in the inventory you and them Module iProcurement Enabled (IE can be purchased at iProcurement) and any other article of local catalogues/categories Loaded using the BULK LOADING in iProcurement is also removed.)
  II. you can always delete the information Exchange Oracle store if you do not use.
  I would advise so do not remove the main store. Instead, you can change the sequence of the display of the stores you iProcurement Page.
  Browsing ==> Internet shopping Catalog Admin (RESP) ==> eContent crib ==> content management ==> stores ==> press the update sequence and make sure that the sequence number for main is superior to any other store so that the hand store falls last in the House of iProcurement Page

  2.i don't think that there is no option to do this. but you can always open an SR with Oracle about it and ask this question\

  hope that answers your Question.

  Thank you
  SANTU

• A few questions about the difference between the Satellite P70, L70, S70

  Hello, I have a lot of questions about the P70, L70, S70 series that come with a 1920 x 1080 panel.

  (1) what are the differences between the L70 and S70 series? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

  (2) P70, L70, S70 doesn't support a 2nd HARD drive or it's just the P70 series that support?

  (3) all the three (P70, L70, S70 series) come with the same TFT panels?

  (4) of the above series, which supports mSata?

  (5) all the model of each series are delivered with support from mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?

  (6) all the foregoing, are delivered with a S - ATA II or III S - ATA interface?

  (7) who is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.

  Thank you in advance.

  > (1) what are the differences between the series L70 and S70? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

  What models Sat L70 and S70 do you mean exactly? There are different L70-xxx-xxx and S70 models on the market that supports different hardware specifications.

  (> S70 2) P70, L70, support a 2nd drive HARD or is - it just the series P70 that support?
  As you can see in this [Sam P70 HDD replacement document, | http://aps2.toshiba-tro.de/kb0/CRU3903II0000R01.htm] the P70 series supports the 2nd drive Bay HARD, BUT even if there is a 2nd HARD drive Bay, this does not mean that you can use the 2nd HARD drive. In the case where the 2nd HARD drive Bay are equipped with HARD drive connector, you can use the 2nd HARD drive

  I also found the [Sam L70/S70 HDD replacement | http://aps2.toshiba-tro.de/kb0/CRU3703HG0000R01.htm] the document on the Toshiba page and there I see this 2nd HARD drive Bay is not available

  (> 3) all three (P70, L70, S70 series) come with the same TFT panels?
  See point 1). Different P70, L70, S70 models were equipped with different material parts.

  (> 4) of the series above, which takes in charge mSata?
  As far as I know that some P70 models are equipped with an mSATA SSD of 256 GB.

  (> 5) do all the model of each series are delivered with support mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?
  See point 4) not all models supports the same hardware specifications

  (> 6) all of the above, come with a S - ATA II or III S - ATA interface?
  I don t think that SATA III is supported. I guess it would be SATA II

  (> 7) which is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.
  Not easy to answer because there are too many models released in Europea.
  And not all models are available in each country. So I guess you will have to look for the models that have been released in your country.

• A few questions about the upgrade on Satellite A300-144

  Sorry for the typos, English is not my mother tongue.
  I want to ask some questions about the upgrade of a300-144.

  * Some info first.*

  CPU: T2370 ([http://ark.intel.com/products/34445/Intel-Pentium-Processor-T2370-1M-Cache-1_73-GHz-533-MHz-FSB]).
  Chipset: GM965 ([http://ark.intel.com/products/29821/Intel-82GM965-Graphics-and-Memory-Controller]).

  * Questions.*

  1. my frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  2 Intel said that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?

  3 I know, taken of my CPU is μFCPGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 ([http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB]) is a compatible processor or there are some limitations in the BIOS?

  > 1. My frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  The speed of the memory is related on the material. This means that the FSB is responsible for the limitation.
  If the FSB would allow support 667 MHz then the memory would also at this speed.

  > 2. Intel says that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?
  The memory depends on the chipset. So if the chipset supports 4 GB of RAM, you should be capable of this move to 4 GB of RAM

  > 3. I know, my CPU is? FC-PGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 (http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB) will be a compatible processor or there are some limitations in the BIOS?

  It might be possible that the new processor would be fully supported by the BIOS, but in most cases it should not be a problem if the chipset would support the new processor.
  But as far as I know the upgrade of the CPU is not supported by Toshiba or any other manufacturers of portable and its your own risk to run laptop with the new processor.

• Question about the recovery partition

  Hello.

  I have a question about the recovery of HARD drive partition.

  If I do the operation to clear the hard disk option in the wizard it will remove * all * or it will keep my partition recovery in this way I can come back later. I want to know because I would like to put on a different OS.

  I know he said he would, but caution in the PDF, I found it says that on a normal recovery too (that he would remove each partition) and I'm a little confused about how the recovery actually worked.

  Thank you.

  Hey Buddy,

  To be honest I n don't know what you mean exactly with this option to erase.

  In General, Toshiba Recovery disk will wipe your entire HDD to restore factory settings correctly. This means that if you start from that disk and follow the instructions on the screen, everything will be removed.

  In addition, the recovery disk doesn t create a recovery partition. It is not available. Disk copy just the files on the second partition in folder HDDrecovery to start an installation of HARD drive recovery.

• A few questions about the Satellite A100 PSAANE

  Hi friends,

  I have a Toshiba Satellite A 100 - PSAANE with Vista Home Basic preinstalled in it.
  Now, I have a few questions... I mention below: -.

  (1) if I want to format my laptop, I need a CD to install for Vista Home basic... then I don't have this Toshiba CD when I bought the laptop. So how do? question: How can I format it?

  (2) can I change my Vista Home Basic to windows XP? I think it's much faster than this one. is it advisable?

  (3) I have a GB of RAM in the laptop. Increase the RAM? I think that my laptop has become to slow down. is it advisable?

  (4) and on my screen, everytime I try to change my profile screen to windows Classic view, my screen begins to blink. and after a while, the screen turns off. So I can't change that. I put the color scheme of windows vista only. What to do about that?

  Please help me friends. Thanks in advance.

  Kind regards
  Perkins

  Hello

  Here, a few questions about the number:

  (1) usually, you should get the Vista Toshiba Recovery DVD. If you didn t receive this DVD then you can order it here https://backupmedia.toshiba.eu/landing.aspx or you could install the disc of Microsoft Vista.

  (2) of course, you can do this. I think that Win XP drivers can be downloaded from the Toshiba driver page.

  (3) Yes, you can upgrade the RAM. For more information, see your manual or search on this forum for similar topics

  (4) maybe it s associated with the graphics driver. Check if you can update. I would recommend additional check if you are using the latest version of the BIOS

  Welcome them