Question about the text box

Similar Questions

• Question on the text box

  Hello.

  I need to be able to make a text box that will allow people to know what kind of information to fill out, example:

  I, __________(name of Patient)understand the services rendered to me.

  If basically just now, I have a text box on underscore, however it comes out like this:

  I, _ understand the services rendered to me.

  Is it possible to make a text box that will also show you what kind of information the person must complete?

  And once he auto erase the text indents so the person can fill their info?

  I use Adobe Acrobat Pro 10.1.4

  Of course, you can use a custom Format script for the field, which is something like:

  Custom Format script

  If (! event.value) event.value = "your default text goes here.";

  The string that you specify here will be displayed when the field is empty and the text that is entered in the field otherwise. When the field is selected, the text will disappear.

• Question about the text wrapping

  I have a picture. I have a block of text to the line around him.

  I want to place a text box to another text on top of the image, however whenever I do this, the new text box follows the rules of the text applied to the image wrapping. How can I do to put a box on top of the image with this new text box "wrapping"?

  CS3 Mac

  Right-click on the text frame and choose the option options of text block. Select ignore the wrapping, and then click OK.

  Bob

• Question about the text from the image

  Hello.

  I saw once a tutorial on how to make the text of an image.

  It was a picture of a beach, and then he cut out the letters in the image to the text.  In this way, the shape of a "T" "BOLD" for example would be a "T" cut out a section of the image of the beach T shaped.  I would like to know how to do this, or what it takes to find this tutorial or a similar tutorial.

  http://www.photoshopessentials.com/Photoshop-text/text-effects/image-in-text/

• The specific question about the placement of an image into text.

  Hello, I had a question about the placement of an image into text.

  I did the contours to create text to place the image inside. My text is 5 words and two lines inside the box.

  When I do create contours he gives me 2 transparent route separate layers for the top and the bottom line.

  How will I be able to do that in a single layer of compound to place image that expands to the two lines?

  First of all, there are two ways of describing the type. The default value creates anchored objects. You want a separate object, so hold down the Option/Alt key when you create outlines. Drag the new contours to separate the text block.

  It is useful to open the layers panel and view the contents of the layer. You have created a group which consists of two transparent traces. In the layers panel, expand the layer so you can see the structure. Shift-select the two transparent traces. (Make sure that the group is not selected.)

  

  Then choose object > tracks > make a compound path. This makes the two transparent tracks into one. Then, you can place or paste into the single compound path.

• Question about the use of the feature drop-down list box!

  I have a form that I am creating for our company that will allow our field nurses choose what they need and print more effieciently.  The problem is that some parts are too long and I can't get the Combo box feature to allow them to be printed on several lines:

  

  I talked to my supervisor to remake the shape to look like this:

  

  But so that we can meet the State's guidelines, it must be formatted like the first, because it is the form of the State given to us.  I want to be able to be:

  (A) that the automatic multi-line text of combo box size so it will get all the information in each box

  OR

  (B) create text boxes at the end of the automatic enteries selected data of the second picture form in boxes that look like the first photo.

  Is it possible to make one of these?

  (A) No.

  (B) Yes. Create a text box with the following code as the custom calculation

  script (assuming that the name of the drop-down list is "Combo Box1"):

  Event.Value = this.getField("Combo_Box1").value;

  For example, when the user makes a selection in the drop-down list box, the value will be

  also appear in the text box. Make sure to set the read-only text box

  and set the drop-down list box to apply the selection immediately.

• Table of contents - power of the text box

  Hello

  I recently started using Adobe InDesign and love it! I have a question around the table of contents. At the beginning of each chapter, we have a simple page with a box in it. (each chapter has about 10 pages). The intention is to have the content of the text become the title of the chapter box and have it displayed in the Table of content. The text box itself has several characters of new line in. When I generate the table of contents, InDesign creates several entries in the Table of contents (one per each new line in the text box). So my question is... Is there a way to specify that the content of the entire text box appears as an entry in the Table of contents. (I'd like to update the table of contents by hand to avoid any errors).

  I appreciate any help in this matter.

  Thank you!!

  So, you say that, break forced line and you want that all the rows in the table of contents? I think that I misunderstood.

  If this is the case you're going to the trouble of formatting of the table of contents, as the forced line break will carry you through to the table of contents (you can change the colours using styles or nested GREP and those will not set if you use a different style in the table of contents list itself).

• HTML (Web), I have a question about the models.

  Hello CC animate developers.

  New features are really good.

  HTML (Web), I have a question about the models.

  <! DOCTYPE html >

  < html >

  < head >

  < meta charset = "UTF-8" >

  < title > $TITLE < /title >

  < meta name = "ad.size" content ="width = $WT, height = $HT" > "

  $CREATEJS_SCRIPTS

  $SCRIPT_START

  var canvas, stage, exportRoot;

  function init() {}

  $CJS_INIT

  }

  $PLAYSOUND

  $SCRIPT_END

  < script type = "text/javascript" >

  "clickTAG" var = "";

  < /script >

  < / head >

  < onload = "init (); the body"style =" background-color: #D4D4D4; " margin: 0px; ">

  < a href = "javascript:window.open (window.clickTag)" >

  < div style = "position: absolute;" cursor: pointer; box-sizing: border-box; border: 1px solid #000000; overflow: hidden; height: $HTpx; Width: $WTpx; Background: rgb (255, 255, 255.0); "> < / div >

  < canvas id = "$CANVAS_ID" width = "$WT" height = "$HT" style = "background-color: $BG" > < / canvas >

  < /a >

  < / body >

  < / html >

  In the example above, the model;

  < Meta name = "ad.siz of" content = "width = $ WTI height = $ HT" > "

  and

  < Div style = "position: absolute;" cursor: pointer; box-sizing: border-box; border: 1px solid # 000000; overflow: hidden; height: $HTpx; Width: $WTpx; Background: rgb (255, 255, 255.0); "> < / div >"

  I use labels. But these tags in the template and import, it gives an error does not occur.

  I think it was a mistake. I want to help in this regard.

  $ HT or Properties $WT , I get an error when I use elsewhere.

  I think I should be able to use anywhere I want.

  The same problem here - I worked around by some DRM models with different values of ad.size, but it's a solution quite short-seight

  Also - you are not able to create the model with transparent background by removing style = "" background-color: $BG ' as it also throws errors - is the only solution that I managed to get updates style = "background-color: $BG; background: none; ", but it's a really bad way of coding things.

  It would be really great to have freedom in changing patterns.

• Set the focus to the text box of the embedded NumericStepper control

  I have an application that requires I use NumericStepper edit control as ItemEditor of a DataGrid column.

  I have two problems that I can't seem to overcome, one being the result of the solution to another:

  (1) I need to instantiate the component NumericStepper during execution, because I don't ' know advance what columns it will require.  More important still, I need to specify default attributes (styles, min, max, width, etc.).  I can't understand how to specify these attributes other than in a .mxml file.  To handle this, I have crreated a component 'wrapper' that's an HBox with a NumericStepper inside her, and I can specify my attributes on the tag NumericStepper.

  (2) now that I did #1 above, although, when I click a DataGrid cell that uses this component editing, the editor comes back but the text box is NOT centered, which means that the user must click a second time if he wants to type a number.  It's very irritating, but I do not know how to manage the focus such as when my HBox-with-embedded-NumericStepper' control rises, it concentrates and its selected data, NumericStepper, just as the 'base' is.

  So, my questions are:

  (1) can I somehow assign property values to a standard when executing NumericStepper, so that I can avoid using my built-in custom control HBox?

  (2) how can I manage the focus so that when my control HBox is in place, the text box is selected and fucused?

  That sounds confusing, but I have a small program to demonstrate this.  The "QtyBad" column uses my own NumericStepper HBos-based and not to be put in the correct focus when activated.  The "QtyGood" column has demonstrated APPROPRIATE behavior, as exposed by the native NumericStepper component, but I can't specify additional attributes / s on this subject.

  Here are all of the program - called "DGNumStepperDemo" - here:

  DGNumStepperDemo.mxml

  <? XML version = "1.0" encoding = "utf-8"? >
  " < = xmlns:mx mx:Application ' http://www.Adobe.com/2006/MXML "layout ="absolute"creationComplete =" onInitialize () "> "
  < mx:Script source = "DGNumStepperDemo.as" / >
  < mx:DataGrid id = "dg1" editable = "true" top = "20" left = "20" width = "350" height = "124" >
  < / mx:DataGrid >
  < / mx:Application >

  DGNumStepperDemo.as

  
  

  ActionScript file
  Import mx.collections.ArrayCollection;
  Import mx.controls.DataGrid;
  Import mx.controls.dataGridClasses.DataGridColumn;
  //---------------------------------------------------------------------------------------- -------
  [bindable]
  private var gridData:ArrayCollection = new ArrayCollection([{Qty:0},{Qty:5},{Qty:10}]);

  private function onInitialize (): void
  {
  CDL of the var: Array = new Array();
  var dgc:DataGridColumn;

  DGC = new DataGridColumn ("QtyBad");
  dgc.dataField = "Qty";
  DGC. Width = 75;
  dgc.itemEditor = new ClassFactory (EditorDGNumericStepper);
  dgc.editorDataField = "value";
  cols.push (DGC);
  
  DGC = new DataGridColumn ("QtyGood");
  dgc.dataField = "Qty";
  DGC. Width = 75;
  dgc.itemEditor = new ClassFactory (mx.controls.NumericStepper);
  dgc.editorDataField = "value";
  cols.push (DGC);

  DG1. Columns = cols;
  DG1. DataProvider = gridData;
  }

  EditorDGNumericStepper.mxml

  <? XML version = "1.0" encoding = "utf-8"? >
  " < = xmlns:mx mx:HBox ' http://www.Adobe.com/2006/MXML ""4"verticalAlign ="middle"paddingRight ="4"paddingLeft = verticalScrollPolicy ="off"horizontalScrollPolicy ="off"> "
  < mx:Script >
  <! [CDATA]
  public function get value(): number {return itemQuantity.value ;}
  []] >
  < / mx:Script >
  < mx:NumericStepper id = "itemQuantity" value = "{data.". Qty}"minimum maximum ="0"="100"/ >
  < / mx:HBox >

  If anyone who bothers to run it, you can see what I mean about the focus problem in the QtyGood and QtyBad columns.

  Any help is appreciated!

  Quick response to the #2 is to change the EditorDGNumericStepper.mxml to the following:

  
  http://www.adobe.com/2006/mxml"
             verticalAlign="middle" paddingRight="4" paddingLeft="4"
             verticalScrollPolicy="off" horizontalScrollPolicy="off"
             creationComplete="focusManager.setFocus(itemQuantity)">
       
            
       
       
  
  

  The only thing I did was put the NumericStepper to 100% width so it fills the column like the standard NumericStepper and it looks a bit better and I added a creation complete event handler that sets the focus to the NumericStepper.  I tested it and it will be emphasis each time on it like a standard stepper.  There may be a more "preferred" way, but it's simple and effective.

  On the #1 question, you want to change the properties, styles, etc. of a NumericStepper standard once it has been added to the data grid?

• Read the text box.

  Hello

  I have no experience with custom or even Javascript actions, so, my request is probably a very easy to solve, I had no idea on how to achieve this.

  Basically, I have a slide in this slide, I have a text box (slide 1). I have another slide with a text box (slide 2). I would like to have the text box on the slide 2 to have the same exact text in the text box in slide 1. If I change the text in the text box on the slide 1, the other text box would inherit the text thereof.

  TLDR; How to set the area text 2 to have the same text as 1 text box in a tip action. Practically ' box 2 == the text box 1.

  Thanks in advance.

  Edit: I forgot to add, I am using Captivate 4.

  Hello, I'm not sure I understand your question straight, please could you give more details: something to do with the terminology. You talk about 'text areas' but in Captivate, there is text (added by the creator of the film) captions and text entry areas (where the user of the published movie will insert text).

  If you want the user to type text in a BER (text entry area) of slide 1 and have this entry on slide 2 in a text caption, you can do this:

  • Create a variable user (projects, Actions, the tab variable), e.g. vTekst (you are Dutch-speaking)?
  • create the TEB on slide 1 and associate it to the variable (in properties, Advanced tab)
  • on slide 2 create the text caption, select Variable to add to the formatting toolbar and add the created variable
  • which edition you will have the same text in the text of the legend (slide 2) car was introduced by the user via the TEB on slide 1.

  If you were talking about the legends of text on both blades, there is no simple way in CP (in Flash) to have an object (in this case the text of the legend) remaining for two slides, the only options are for the duration of the slide or project. But you can of course easily copy and paste the text in the legend.

  Later, tot

  Lilybiri

• Question about the events of list management

  I searched in the circles of a response to this problem for a while now.
  
  Background information:
  
  I have an application that uses a number of listservs. However, some end users have complained about this particular control since you not only have select from the popup LOV, but you then have to click on the 'Add' button until the selected value will be submitted to the page. They would like me to display some callback types click on 'Add' when a value is selected, but not yet added.
  
  I found the names of the different elements of the list manager and created a simple javascript function to change the background color of the text box where the selected value is displayed and attached that work to the onchange event.
  
  My problem is that if something enter the text box fire the onchange event, by clicking on the 'Add' button does not work. In other words, I can put a red background (or whatever I end up doing) if they have not yet added value, but I can't put it right back when the user clicks on 'Add '. The best work around I came uses the list manager onmouseover event, but is not as clean as I like it.
  
  The 'Add' button has an onclick (obviously) the events that first calls a function "appendToList" and then deletes the text box.
  
  {color: #0000ff} & lt; "input type ="button"name =" "value ="Add"onclick =" appendToList (return [0].p_v99.value.toUpperCase (), return [0] .p_v04); return [0].p_v99.value = "" / & gt;
  
  {color} {color: #000000} The appendToList function is defined in the body of the page, just forward to the & lt; fieldset & gt; tag that creates the list manager, leading me to believe that there is a template somewhere.
  
  Question:
  
  Is it possible to edit the template for the list manager so that I can call my function when the user clicks on the button "add"?
  
  or
  
  Is it possible to redefine the function appendToList somewhere on this page, so I can place a call to function within this function?
  
  or
  
  Is there another way to restore the appearance of the text box when the user clicks on the button 'Add' that I thought not again?
  
  
  Thanks for any help you can provide. This is bugging me. {color}

  Hello

  I think that what follows may work for you.

  Suppose you have a component called P4_LIST_MANAGER list manager. Add the following code in the Footer area of the region setting:

  <script type="text/javascript">
  var lm = document.getElementById("P4_LIST_MANAGER_ADD");
  lm.onchange = function()
  {
   if (lm.value.length > 0)
   {
    lm.style.backgroundColor = 'red';
   }
  }
  var lmfs = document.getElementById("P4_LIST_MANAGER");
  lmfs.onclick = function()
  {
   if (lm.value.length == 0)
   {
    lm.style.backgroundColor = 'white';
   }
  }
  </script>
  

  The main problem you see is that for an input element onchange event is not raised when its value is changed via javascript on the page. The above assumes that the user has clicked in the area of field set to use either the Add or Remove buttons, and then resets the background color.

  Andy

  Published by: ATD 15 January 2009 19:02

• the text box changes color when you type in a google search and the cursor and the text becomes invisible.

  When I open Firefox, a cursor appears in the search text box, but I have to click on it before I can enter text. When I click on the text box changes color (from teal'c white to a light color) and the slider and I type text is invisible.

  Which may be caused by protection of typing"Comcast constant guard.

  'Configure the Anti-keylogger settings'-> disable

  • [874709/questions/874709]
  • [870165/questions/870165]

• Regarding events for the text box

  Hi all,

  I'm new with the Labview I have it the simple program I use the tab control in the tab control I have set Num control a (text box) in the tab 1 and Num B in the tab2 and control on the front panel, I place the indicator of Num C.I want when I set the value of a control number and enter then value goes to the led num c.Simillarly when I put the value B number and press on enter, then the value of B will go to the num indicator. How do I put the event on the text box as the value of A or B num command will go num indicator capers press on enter for the number corrosponding control.

  Due to the fact that I can't delete my post, I'm editing only say I am ashamed of what my response was completely wrong because of the mistake of reading your question :/

• How to use the selection tool to resize a text box? Before I was able to click on the text box with the selection too in order to resize, but now I click on it and it only gives me 'path' or 'anchor' options.

  How to use the selection tool to resize a text box? Before I was able to click on the text box with the selection too in order to resize, but now I click on it and it only gives me 'path' or 'anchor' options.

  Ashley,

  What about window > show the rectangle enclosing (Ctrl / Cmd + Shift + B to toggle)?

• try to change the text in a saved file, but it will not allow isolate me the text, place the cursor in the text box or simply go back to remove.

  try to change the text in a saved file, but it will not allow isolate me the text, place the cursor in the text box or simply go back to remove.

  Hello

  in what format save you your file? If it's a jpg file, then the text is compressed and unfortunately PS is telling things as they are. Even if you could change the text before you save, after having been saved in jpg format, the text is merged and is no longer editable.

  A good solution is to save the files as PSD files, photoshop files. In this case, all layers are saved uncompressed and so your text will appear in its own layer in photoshop. All you need to do in this case to change it is the result of a three-step procedure

  (1) select the right layer

  (2) take the text tool in the tools bar

  (3) mark and change your text

  So the crucial question is: in what format you save your file?