question about the work to remove the DB

Similar Questions

• Question about the recovery partition

  Hello.

  I have a question about the recovery of HARD drive partition.

  If I do the operation to clear the hard disk option in the wizard it will remove * all * or it will keep my partition recovery in this way I can come back later. I want to know because I would like to put on a different OS.

  I know he said he would, but caution in the PDF, I found it says that on a normal recovery too (that he would remove each partition) and I'm a little confused about how the recovery actually worked.

  Thank you.

  Hey Buddy,

  To be honest I n don't know what you mean exactly with this option to erase.

  In General, Toshiba Recovery disk will wipe your entire HDD to restore factory settings correctly. This means that if you start from that disk and follow the instructions on the screen, everything will be removed.

  In addition, the recovery disk doesn t create a recovery partition. It is not available. Disk copy just the files on the second partition in folder HDDrecovery to start an installation of HARD drive recovery.

• Re: Several questions about the recovery of the Satellite L750 features

  I have several questions about the recovery of Satellite L750 features available to it. Any help and answers would be useful.

  (1) when I started the laptop first, he asked me to create a recovery CD incase I need to reinstall the operating system. But he also said that he built in the recovery partition, so therefore, I have to make a recovery cd or not?

  (2) will be the recovery CD is exactly the same as the recovery on the system partition?

  (3) is the partion of CD or recovery includes all the integrated software pre-installed with the laptop?

  (4) also in the device manage management it shows watch partion recovery but it is empty, is it true?

  (5) in the second partition (drive D) system, he has a record with what looks like the recovery of files and folders. Is it safe to move/remove it?

  Hello

  I'll try to provide answers:
  1 - to ensure that everything works perfectly you don t need these discs, but if something goes wrong with the HARD drive you will not be able to do anything. When you have the recovery DVDs, you will still be able to install the recovery image and once again the factory settings. So my advice to you is: create these discs as soon as possible. Use only on DVD-R media and buy products of high quality (TDK or Verbatim).
  2 - Yes.
  3 - Yes.
  4 - No. Don t be confused with this.
  5. in a first time create restore DVD, and later you can do what you want. I put t know which files mean you but don t touch anything before that of the recovery disks to be created.

  In the past, many people have been experimenting with the structure of HARD drive and partitions and later was surprised when installing disk recovery HARD has been damaged. Don t make the same mistake.

  If you have any other questions you are welcome.

• Question about the charging light on the venue Pro 11 (5130)

  I'm curious... read these discussions in recent weeks... found this work with the Tablet for about 2.5 hours after... I was up to 75% of battery. Connect the tablet to install a software... noticed 75%, not charging. Stop... removed the battery and put it back... He then read 75%, in charge. OK... so what's fixed now... a question about the manual of the system. Said that when the battery is charging, a white light is supposed to be on... where? When that I start, I see a momentary white light at the top of the screen, by the front camera... but when it is plugged and the loading and off... white light no.... No a - I misread? Thank you

  Light (color is white when the load) is located next to the power switch (top, right). Mine re-load very fast.

  White light goes off (or does not) when the Tablet is fully charged (the light on the charger is always on when it is plugged into the outlet)...

• HTML (Web), I have a question about the models.

  Hello CC animate developers.

  New features are really good.

  HTML (Web), I have a question about the models.

  <! DOCTYPE html >

  < html >

  < head >

  < meta charset = "UTF-8" >

  < title > $TITLE < /title >

  < meta name = "ad.size" content ="width = $WT, height = $HT" > "

  $CREATEJS_SCRIPTS

  $SCRIPT_START

  var canvas, stage, exportRoot;

  function init() {}

  $CJS_INIT

  }

  $PLAYSOUND

  $SCRIPT_END

  < script type = "text/javascript" >

  "clickTAG" var = "";

  < /script >

  < / head >

  < onload = "init (); the body"style =" background-color: #D4D4D4; " margin: 0px; ">

  < a href = "javascript:window.open (window.clickTag)" >

  < div style = "position: absolute;" cursor: pointer; box-sizing: border-box; border: 1px solid #000000; overflow: hidden; height: $HTpx; Width: $WTpx; Background: rgb (255, 255, 255.0); "> < / div >

  < canvas id = "$CANVAS_ID" width = "$WT" height = "$HT" style = "background-color: $BG" > < / canvas >

  < /a >

  < / body >

  < / html >

  In the example above, the model;

  < Meta name = "ad.siz of" content = "width = $ WTI height = $ HT" > "

  and

  < Div style = "position: absolute;" cursor: pointer; box-sizing: border-box; border: 1px solid # 000000; overflow: hidden; height: $HTpx; Width: $WTpx; Background: rgb (255, 255, 255.0); "> < / div >"

  I use labels. But these tags in the template and import, it gives an error does not occur.

  I think it was a mistake. I want to help in this regard.

  $ HT or Properties $WT , I get an error when I use elsewhere.

  I think I should be able to use anywhere I want.

  The same problem here - I worked around by some DRM models with different values of ad.size, but it's a solution quite short-seight

  Also - you are not able to create the model with transparent background by removing style = "" background-color: $BG ' as it also throws errors - is the only solution that I managed to get updates style = "background-color: $BG; background: none; ", but it's a really bad way of coding things.

  It would be really great to have freedom in changing patterns.

• A few questions about the upgrade on Satellite A300-144

  Sorry for the typos, English is not my mother tongue.
  I want to ask some questions about the upgrade of a300-144.

  * Some info first.*

  CPU: T2370 ([http://ark.intel.com/products/34445/Intel-Pentium-Processor-T2370-1M-Cache-1_73-GHz-533-MHz-FSB]).
  Chipset: GM965 ([http://ark.intel.com/products/29821/Intel-82GM965-Graphics-and-Memory-Controller]).

  * Questions.*

  1. my frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  2 Intel said that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?

  3 I know, taken of my CPU is μFCPGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 ([http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB]) is a compatible processor or there are some limitations in the BIOS?

  > 1. My frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  The speed of the memory is related on the material. This means that the FSB is responsible for the limitation.
  If the FSB would allow support 667 MHz then the memory would also at this speed.

  > 2. Intel says that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?
  The memory depends on the chipset. So if the chipset supports 4 GB of RAM, you should be capable of this move to 4 GB of RAM

  > 3. I know, my CPU is? FC-PGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 (http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB) will be a compatible processor or there are some limitations in the BIOS?

  It might be possible that the new processor would be fully supported by the BIOS, but in most cases it should not be a problem if the chipset would support the new processor.
  But as far as I know the upgrade of the CPU is not supported by Toshiba or any other manufacturers of portable and its your own risk to run laptop with the new processor.

• A few questions about the use of data and Cliq

  I have the cliq, however I chose to not get 3G (so I bought full fare). So I have a few questions about the phone and the use of 3G / 2 G/Edge:

  1 - is possible to disable completely the 2G / 3 G/Edge? I know you can switch between them, but are anyway just tell the phone to stop using them altogether since I'm not subbed to the service?

  2. when the update takes place, I guess we'll have to reconnect motoblur and etc, but if I don't have 3 G will I have motoblur connection problems after the update? Or he keeps the latest wifi settings so that it would connect to wifi to connect. When I first got my phone it was not a problem b/c I had 3G for the first month.

  I hope that makes sense, thanks!

  To stop all the data, I would like to download an application called APNDroid. He cut them all down. When you log on to blur you have 3G or WIFI doe this without getting a timeout error. During the process of setting up your Blur account, you can press the menu button and set up your wifi to work, this will connect you to Blur and your phone will be connected to the blur. If I were you I would be rethinking to do a data plan since you are really losing out on most of your main features of phones. It's your choice, however.

• Questions about the Windows Feedback program Fullfillment

  When will I know if my fullfillment of windows feedback program is over, that I have installed on my PC?

  Hello mpic16,

  If you have questions about the Windows feedback program, you will need to respond here.
  https://WFP.Microsoft.com/welcome.aspx

  You can send an email to: * e-mail address is removed from the privacy *.

  They would be better able to answer your questions and concerns.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I posted a question about the FBI virus. How to get rid of him. I ' v was only one answer. Someone to give here can help me with that. I am 62 and although I use my high tower dyly I'm not a COMPUTER technician.

  I posted a question about the FBI virus. How to get rid of him. I ' v was only one answer. Someone to give here can help me with that. I'm 62, and I'm not a computer genius. I have some [eratly helpgetting need to get rid of the virus of the FBI. MS antivirus and scan not work or identify it.  Help, please! 1

  Emisoft is a desperately slow download, as I just discovered.

  You can simply run Malwarebytes and it...

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• Recently bought a laptop computer; A few questions about the offer Upgrade to Windows 8

  I have a few questions about the Upgrade of Windows 8 offer for new computers.  I recently bought a Toshiba Satellite S855-S5268 of amazon.com, which came with Windows 7 Home Premium.  Toshiba already has a beta version of drivers and utilities for Windows 8 for the S855 on their Web site.

  (1) I bought my laptop in July of this year, and I've not yet registered for 8 Windows Upgrade offer with Microsoft.  Am I still eligible to receive the upgrade, if I sign up soon?
  (2) if I buy the upgrade through this offer, I'll be able to download an ISO file so I can burn the installation media, or do I need to upgrade to Windows 7?
  (3) if I will be able to burn the installation media, I'll be able to erase my hard drive and do a clean install of Windows 8 (which I'd rather do, I have a lot of backups of my data).  I am aware that I would probably need to provide my product key Windows 7 Home Premium 64-bit OEM during the new installation, because it is an upgrade and not a full version; This isn't a big deal, because my Windows 7 Home Premium 64-bit OEM product key is stuck at the bottom of my laptop.
  (4) my current copy of Windows 7 is activated by seeing my BIOS (I have a traditional BIOS, not a UEFI).  If I had to switch to Windows 8 and decide then I'd rather back in Windows 7, for example, a few months later, I'll be able to do that (I burned recovery of Windows 7 with the Toshiba utility disks, which I did), and Windows 7 will continue to activate by seeing my BIOS, even after the installation (and later remove) Windows 8?
  Thank you very much!

  I have a few questions about the Upgrade of Windows 8 offer for new computers.  I recently bought a Toshiba Satellite S855-S5268 of amazon.com, which came with Windows 7 Home Premium.  Toshiba already has a beta version of drivers and utilities for Windows 8 for the S855 on their Web site.

  (1) I bought my laptop in July of this year, and I've not yet registered for 8 Windows Upgrade offer with Microsoft.  Am I still eligible to receive the upgrade, if I sign up soon?

   

  Yes, the registration period is between June 2, 2012 to January 31, 2013.

  (2) if I buy the upgrade through this offer, I'll be able to download an ISO file so I can burn the installation media, or do I need to upgrade to Windows 7?

   

  Yes, the Upgrade Wizard of Windows 8 will allow you to create a bootable DVD or you can grab the ESD file and save it.

  (3) if I will be able to burn the installation media, I'll be able to erase my hard drive and do a clean install of Windows 8 (which I'd rather do, I have a lot of backups of my data).  I am aware that I would probably need to provide my product key Windows 7 Home Premium 64-bit OEM during the new installation, because it is an upgrade and not a full version; This isn't a big deal, because my Windows 7 Home Premium 64-bit OEM product key is stuck at the bottom of my laptop.

   

  Yes and there are better ways to reinstall Windows 8 without using the installation disc, you can use the reset and refresh.

   

   

  These steps will take you through refreshing your PC:

  · Press the Windows key + C on your keyboard to show the charms (if you use a touch screen: touch the right edge of your screen and drag your finger to the left)

  · Click settings

  · Click change PC settings

  · Click general in the left column

  · Under refresh your PC without affecting your files, click Start

  Then follow the instructions that will be provided on-screen to cool your PC.

  (4) my current copy of Windows 7 is activated by seeing my BIOS (I have a traditional BIOS, not a UEFI).  If I had to switch to Windows 8 and decide then I'd rather back in Windows 7, for example, a few months later, I'll be able to do that (I burned recovery of Windows 7 with the Toshiba utility disks, which I did), and Windows 7 will continue to activate by seeing my BIOS, even after the installation (and later remove) Windows 8?
   
  As long as you have a recovery disk which you should create or use the construction in the recovery partition, Yes, it will self activate.
  Thank you very much!

• Questions about the management of specific nodes in different hierarchies

  Hi all

  I have a question about the specific management of some particular set nodes, which are located in different hierarchies within a same version.

  I want to know if there is any editing made to certain properties of these specific nodes or if the nodes are deleted/moved/edited approval to be triggered for the data manager.

  or should not allow users to edit (adding/moving/deleting/changing property values) or those specific members.

  
  

  According to my understanding of the nodes of domain prevents the removal of nodes, but I don't want my Member prefix/suffix, domain is the only way to prevent the change.

  
  

  
  

  
  

  Thanks and greetings

  Madhu
  

  We have an obligation to not allow a node to remove or deleted without the approval of the admin, so I created a Boolean property AllowDelete is false, which is substitutable, default and is available only in a category of property Admin, for which most of the users do not have access.  Then, I created a validation of PropRemove with an error message that tells the user to contact a user admin to remove or delete the node.  The admin can change the AllowDelete to true, then can either remove himself or to allow the user to do.

• Questions about the terms and conditions

  Dear team of Adobe Stock,

  I am considering a subscription for an e-commerce site that I am developing. I have a few questions about the terms and conditions:

  3.5 social media use. You can view or download an unmodified version of the book on the Social media Site if (A) you include a notice of copyright in the work itself (© author name - stock.adobe.com) and (B) the terms of use governing the Social media Site do not include any provision that would grant exclusive rights or the ownership of those works or alterations to anyone. "Social Media Site" means a website or application that puts the main emphasis on facilitating social interaction between its users and allowing users to share content in such social interaction

  What I have to insert in each post on social media on behalf of the author? Generally, this information is displayed only for free images. What I have to insert this information even if I signed up for a plan?

  Thank you

  Hello

  Please see the link below for help:

  http://wwwimages.Adobe.com/content/dam/ACOM/en/legal/servicetou/Adobe-stock-additional-ter ms_20160119.pdf

• I have a question about the license.

  Hi , I have a question about the license.

  I'm going to play a game online non-commercial (real property services). And I'll use an Adobe Photoshop to make a picture. In this case, can I use single license (non-commercial)? If there is no problem, is it normal that I have use a student permit? Just for non-commercial and not business.

  
  

  Thank you.
  

  Yes, it's fine.

  You can even use a student for commercial work permit to make money while you are studying...

• A question about the insertion of the localTimeStamp returned the value into a timestamp with time zone column

  Hello

  Oracle version: Enterprise Edition Release 12.1.0.1.0 - 64 bit

  OS: CentOS 4.6 X86_64                  

  I have a question about the localTimeStamp function. According to the documentation for this function is
  the same thing as current_TimeStamp except that the returned value does not include the time zone.

  Consider the following example:

  SQL > create table tmptab (colval timestamp with time zone not null);

  Table created.

  SQL > insert into tmptab (colval) values (localTimeStamp);

  1 line of creation.

  SQL > select t1.colval, tmptab from t1;

  COLVAL

  ---------------------------------------------------------------------------

  24 JANUARY 14 09.45.42.253732 H + 01:00

  SQL >

  Why introduce the foregoing did not fail? the data type of the column in my table colval expects a timestamp with time zone

  during each which inserts as I understand (correct me if I'm wrong) is not provided by the localTimeStamp function.

  Could someone kindly tell me what I misunderstood?

  Thanks in advance,

  dariyoosh wrote:

  Hello

  Oracle version: Enterprise Edition Release 12.1.0.1.0 - 64 bit

  OS: CentOS 4.6 X86_64                  

  I have a question about the localTimeStamp function. According to the documentation for this function is
  the same thing as current_TimeStamp except that the returned value does not include the time zone.

  Consider the following example:

  SQL > create table tmptab (colval timestamp with time zone not null);

  Table created.

  SQL > insert into tmptab (colval) values (localTimeStamp);

  1 line of creation.

  SQL > select t1.colval, tmptab from t1;

  COLVAL

  ---------------------------------------------------------------------------

  24 JANUARY 14 09.45.42.253732 H + 01:00

  SQL >

  Why introduce the foregoing did not fail? the data type of the column in my table colval expects a timestamp with time zone

  during each which inserts as I understand (correct me if I'm wrong) is not provided by the localTimeStamp function.

  Could someone kindly tell me what I misunderstood?

  Thanks in advance,

  Then, when you do

  create table t (neck DATE);

  Insert into t (to_date ('1st January 2014', ' mon-dd-yyyy "");)

  Are you surprised that it works? After all a DATE column contains a time component, you do not provide: but he

  works and gives you 00:00:00 as the component "hour".

  Similarly, the timezone component is being developed to automatically with, I think, time zone of your system.

• Consider purchase of Wacom Cintiq 27 HD Touch - Questions about the tactile feature in Photoshop and Lightroom

  I'm considering buying a 27 HD Touch of Wacom Cintiq monitor. I have a few questions about the two programs Adobe and their use of the 'touch' feature - Photoshop CS6 and Lightroom 5.7 running on Windows 7.

  1 problems related to touch a feature in Lightroom and Photoshop CS6 and 5 resolved that you see on the forums of Wacom a year ago?

  2. If so, is there sufficient value gained through the tactile feature in Photoshop CS6 and Lightroom 5 to justify the $500 price difference between the Cintiq 27 HD vs Touch HD? (I realize that this is a subjective question based on the abundance of its cash).

  3. I intend to stay with CS6 as long as possible to avoid a monthly subscription, BUT I wonder if buy the Touch HD can provide additional key features in future releases of these products that do not exist currently. (It is a pie in the kind of sky in question).

  Thank you!

  Kent

  Support for Photoshop Touch is added by CC 2014.2.2.  However as the Pro Intuos Wacom tablets with touch can be used with earlier versions of Photoshop and the Wacom Tablets Configurator can custom features can be used with Photoshop touch tablets.  I use LR but I don't know that the same thing would be true for her. You can configure the setting for many applications. The device driver knows which application its interfacing with and uses the parameter set for each...

  I have disable most of touch when using Photoshop.  The main reason why I have a Tablet is Photoshop Brush tools. Like Eraser, clone stamp, etc, nothing is better then a pen when it come to create the layer mask.  For most programs, I always use a mouse and I use the keyboard, the mouse and the pen with Photoshop...

  I never wanted a Cintig I do not have my hand between my eyes and the work. I'm not an artist.

• Question about the OSB proxy service

  Hello
  
  I'm new to the world of SOA/OSB. I'm working on a POC from the OSB for our existing application. I have a question about the definition of the URL endpoint to the proxy service. It is possible to specify a generic url endpoint to a proxy service. Something like / SomeService / *. I tried and got errors. Is it possible to do somethig like that or it is a mistake on a conceptual level.
  
  Thank you

  anything you type in the uri of the endpoint of entry will be the contextroot to your service, so /SomeService should indeed be sufficient or as mentioned Pierluigi/SomeService/blabla is also valid (Betty is not a parameter query, but only a part of the contextroot)

  If you want to use a service like http rest

  / SomeService/blabla would still be the contextroot, and after that, you can use the query parameters

  / SomeService/badarou? var1 = test & var2 = test or/SomeService/blabla/employee/id/1