Question about upgrading fglam on servers monitored for cart javaEE
Hello
I just upgraded our FMS to 5.6.5 today and tonite, I tried to upgrade to the last agents JavaEE application servers. Unfortunately when I try to deploy, it is said that our fglam is an intermediate version behind. (from memory I think the fglams are on 5.6.2 and javaEE carts require 5.6.2.2 or something close to that).
Therefore, to upgrade the fglams - could I just do that on the application servers that will JavaEE agents? If so, how an fglam upgrade is made to a selective set of servers?
Thank you
"mark".
Once you have installed the update FglAM cartridge, you can go to the ' Hosts/Agent/Agents of Directors' dashboard that shows that all the connected Agent Managers. This dashboard, you can selections several hosts, and then click "Upgrade".
Kind regards
Brian Wheeldon
Tags: Dell Tech
Similar Questions
-
Questions about upgrading Vista to Windows 7 for free as it was offered once?
Several years ago I got when I was with Windows XP I spoke to Microsoft and said I could use the 64-bit and 32-bit disk on different computers, by using the same product key, but there are certain requirements. I think the 2 computers were to be in the same place and I was the owner. I'm a little hazy on the rules, but I know that I learned that I could use both versions 32 and 64 different bits with the same key. I have a desktop running 64-bit Windows 7 Professional and a laptop running Vista. Both are registered for me, but the laptop was a gift from our son for the wife who is disabled and never leaves the House except for visits to the doctor. It comes preinstalled with Vista, but there were so many problems with Vista, Microsoft offers an automatic upgrade to Windows 7 at the time. I never took advantage of this because Best Buy, where the laptop was purchased, wanted to get paid to do the upgrade. My wife is now having a lot of trouble with various programs with Vista, I have two disc of Windows 7 Professional, I received directly from Microsoft, a 32-bit and 64-bit. There is only 1 button, but I learned the upgrade to Windows 7 was supposed to be free. I have much more knowledge now and can install the update myself, but can I use the 32 bit disc and the very key to do. Otherwise, I would use the 32-bit disk and get a new key? Where can I get a new key for the Vista upgrade to Windows 7 for free as it was offered once?
Several years ago I got when I was with Windows XP I spoke to Microsoft and said I could use the 64-bit and 32-bit disk on different computers, by using the same product key, but there are certain requirements. I think the 2 computers were to be in the same place and I was the owner.
This is incorrect information, product key for 1 license 1, 1 computer.
I'm a little hazy on the rules, but I know that I learned that I could use both versions 32 and 64 different bits with the same key.
Yes, and you can use it to activate on the same computer architecture.
I have a desktop running 64-bit Windows 7 Professional and a laptop running Vista. Both are registered for me, but the laptop was a gift from our son for the wife who is disabled and never leaves the House except for visits to the doctor. It comes preinstalled with Vista, but there were so many problems with Vista, Microsoft offers an automatic upgrade to Windows 7 at the time. I never took advantage of this because Best Buy, where the laptop was purchased, wanted to get paid to do the upgrade. My wife is now having a lot of trouble with various programs with Vista, I have two disc of Windows 7 Professional, I received directly from Microsoft, a 32-bit and 64-bit. There is only 1 button, but I learned the upgrade to Windows 7 was supposed to be free.
Sorry, but this offer no longer exist.
The Windows 7 Upgrade Option program debuted on June 26, 2009 , it provides that anyone who buys a PC to a participant OEM or retailer with Windows Vista Home Premium, Business or Ultimate to receive an upgrade to the corresponding version of Windows 7 at a cost little or not. The Option Windows 7 upgrade program will be available until January 31, 2010 and is global.
I have much more knowledge now and can install the update myself, but can I use the 32 bit disc and the very key to do. Otherwise, I would use the 32-bit disk and get a new key? Where can I get a new key for the Vista upgrade to Windows 7 for free as it was offered once?
You will need to purchase an additional license.
-
Question about upgrading to WXP Pro
I recently bought a model number Equium PSM57E a friend. I got was the laptop and the charger, HDD played upward, so I replaced it with a blank, but now I am installing WXP Pro on the machine and it keeps hanging on me. I just get a message saying "the installation program starts windows.
There is no light coming on led to show any type of hard disk activity, I was wondering if the laptop was a dud total until I managed to get windows I'm working on it, but trying to take WXP pro as operating system, is beyond me.
Just in case you are wondering I have flashed and updated the bios, but was wondering if I need a third-party for the disk controller driver as the hard drive seems dead, when you try to upgrade.
Thanks in advance for any info you can give me.Hi John
It seems that you have an Equium M50 PSM57E.
One question: are you sure you bought a good laptop to work?In any case, first of all, you must check if the BIOS can recognize that the new installed HDD and check if you have purchased a HARD drive that is supported by M50.
To my knowledge the BIOS supports a HARD drive size limitation.
This means that not all HARD drive sizes are supported, and may not be used!
But after some discussion here in the forum the Equium M50 should be able to manage a 100 GB HARD drive.Finally and above all remember that you use WinXP Pro, which already supports the SP2. This is necessary and important.
Good luck
-
Satellite A350D - 20K - Question about upgrade second HDD + Temperature
I have a question about my laptop. I have notticed it is a second location of HARD disk on the bottom.
Is it possible to use this to increase my storage?
And if yes, how do I do that? I don't see all the connectors.
What type of HARD drive to use in case it is possible to use this slot machine?My second question is on my laptop to be very hot after a short period of use.
I installed speedfan to record the temperature. When I start the laptop, it already is between 45 and 50 degrees.
He stayed there for half an hour and then it starts to get warmer. When I start to use the laptop for anything, it triggers to between 70 and 80 degrees.This does not seem normal to me. I tried to clean the vents with compressed air, but it has not made a difference.
I searched on the internet how to take the laptop part for proparly cleaned TI.
But I can't so I'm looking that destroy it.This could be the cause and more importantly, how can I solve this problem?
Tom
The second HARD drive bay contains the HARD drive connectors?
If Yes, then you can use a SATA 2.5 HARD.
If there are no connectors, then you will not be able to use the second HARD drive> I have installed speedfan to record the temperature. When I start the laptop, it already is between 45 and 50 degrees. He stayed there for half an hour and then it starts to get warmer. When I start to use the laptop for anything, it triggers to between 70 and 80 degrees.
CPU and GPU produce a lot of heat. The heat dissipation is always created then there s nothing unusual that the temperature rose to higher level.
You can change the settings in Win 7 power management. You can set the CPU to lower performance and can increase the activity of fan, which will help lower the temperature. -
Equium M70: Question about upgrade graphics card
Is it possible to upgrade this machine (below spec) for best graphics preformance? Read past postings left me little hope. All the advice sensible word be very appreciated. Thank you, Scott
Operating system: Windows XP Home Edition (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.050301 - 1519)
Language: English (regional setting: English)
System manufacturer: TOSHIBA
System model: SATELLITE M70
BIOS: Ver 1.00PARTTBL
: Processor Intel (r) Pentium (r) M 1.73GHz
Memory: 502 MB of RAM
Page file: 456MB used, 772 MB of available space
Windows Dir: C:\WINDOWS
DirectX version: DirectX 9 .0c (4.09.0000.0904)
DX setup parameters: not found
DxDiag Version: 5.03.2600.2180 32 bit Unicode------------
DxDiag Notes
------------
The DirectX files tab: no problems found.
Display 1 tab: No problems found.
Sound tab 1: No problems found.
Music tab: no problems found.
Input tab: no problems found.
The network tab: no problems found.--------------------
DirectX Debug levels
--------------------
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (detail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (detail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (detail)---------------
Display devices
---------------
Name of the card: Mobile Intel (r) 915GM/GMS, 910GML Express Chipset Family
Manufacturer: Intel Corporation
Chip type: Intel(r) 915GM/GMS, 910GML Express Chipset
DAC type: internal
The device key: Enum\PCI\VEN_8086 & DEV_2592 & SUBSYS_FF041179 & REV_03
Display memory: 128.0 MB
Current mode: 1280 x 800 (32 bit) (60 Hz)
Monitor: Plug-and-Play monitor
Monitor Max Res: 1600,1200
Driver name: ialmrnt5.dll
Driver version: 6.14.0010.4497 (English)
The DDI Version: 9 (or higher)
Driver attributes: Final retail
Format/driver Date: 07/02/2006 08:56:16, 45697 bytes
Would be WHQL logo: Yes
WHQL Date stamp: n/a
VDD: n/a
Mini VDD: ialmnt5.sys
Mini VDD Date: 07/02/2006 09:04:34, 1399615 bytes
The instrument identifier: {D7B78E66-66D2-11CF-5863-0EDFA2C2CB35}
Vendor ID: 0 x 8086
Device ID: 0 x 2592
SubSys ID: 0xFF041179
Revision ID: 0 x 0003
Revision ID: 0 x 0003
Video Accel:
Deinterlace caps: n/a
Registry: OK
DDraw status: enabled
D3D status: enabled
AGP status: Not available
DDraw Test result: does not work
D3D7 Test result: does not work
D3D8 Test result: does not work
D3d9 Test result: does not workI have the Satellite Pro M70. Update graphics on laptops is not generally possible. Perhaps CPU but graphics card. I really put t believe.
Can you imagine what happen inside the laptop if the Exchange was possible?
-
A few questions about the making of the animated for a site Web Nav buttons
Hello, I have a few questions about creating some animated for a NAV buttons.
There are 2 actions I want to trigger on pouting above.
If I want to use a static (PNG) image I created in Photoshop for the real button, can I use that? I want well drag the button down on the passage of the mouse and drag upward on the mouse. If I push the part of the "Web" button (sorry, that it comes from a Photoshop guy) it will disappear in the final animation? Another way to say this, if I put something lively off the coast of the white area, it no longer appears in the movie (.swf) when it is published?
For the second part. You can see a bit of what I want to do if you look high Nav of the page of the website: http://www.photoshopsupport.com/index.html
I need the 'light' above the button and it's going to be on another < div > color so I can't put a solid color of BG for my flash document. But I want to get the effect of the 'bar' lighting up above the button and the real key slide downwards to pouting on.
You can provide any help would be greatly appreciated.
We target the dynamicaly graph. Since the MouseEvent is now on the invisible sprite and not the graph itself, the one-for-all function has no reference to this graph. You can access the invisible sprite with event.target (or event.currentTarget), you can also target the chart because we declared "mygraphic" custom property to serve as a reference for the graphic. Thus, event.target.mygraphic is the benchmark for graphics.
Of course, this is just an example. There are other variations of this trick.
____________________
Design Cyboide
-
Question about upgrade disk for Tecra M1
Hello
I have a failed 60 GB hard drive in my notebook Tecra M1 aged three years and decided to upgrade to a new drive before the existing one doesn't die. I would like to take this opportunity to install a slightly larger HDD (for example 80 to 120 GB) but I'm unclear as to the maximum permitted by the BIOS (1.5 v) has anyone successfully mounted a drive of more than 60 GB in a Tecra M1 or found definitive information on the limitations of the BIOS?
Thank you very much
Jezzer
Hello
I found information that the Tecra M1 supports 30 GB, 40 GB, 50 GB and 60 GB HDD.
Perhaps you might be able to use a 80 GB HARD drive, but I think that the 100 GB HARD drive is definitely too large size of HARD drive.What about a HARD drive test? You could take the laptop to a merchant of HARD drive and you could test several sizes.
I think that it is no bad idea. What do you think?? -
Question about upgrading the CPU for Satellite 1110-Z14
Hello
My satellite 1110-z14 has a processor intel mobile celeron @ 1.5 ghz. The processor is based on architecture p4 - it should be a northwood-256.
Is it possible to upgrade the processor?1110-z20 is powered by the mobile celeron @ 2.0 ghz - all other technical specifications except the hard drive are the same... (ati radeon m6 with 16 MB, usb 1.1 mob and so on...).
What do you think, can I upgrade the processor?
Can what cpu I use?Thanks for your replies!
Hello
AFAIK the 1110 series computer is equipped with an Intel 845MZ system controller.
I found some details about Intel 845MZ chipset on the Intel page. It must be able to manage the Mobile Intel Pentium 4 - M with 400 MHz FSB Processor
http://www.Intel.com/products/chipsets/845MP/index.htm
On the Intel page, you can find the entire family of the CPU.But generally the replacement of CPU and the upgrade is not recommended and no one can say whether the OS will run stable after these updates, so be careful.
-
Question about upgrading CPU for Satellite A30 104?
Hello
My Satellite A30 104 recently came at the end of its warranty and had to open the heatsink for cleaning, and seeing that the CPU was available, I wonder if there should be (likely) to upgrade.
The processor is a Celeron 2.6 GHz (Northwood). I'm no more grunt, I would prefer a more low-power chip, while the cache L2 much bigger of a Pentium 4 is also desirable. I would be very grateful if someone could give advice if upgrades are likely available, and if so the chips would be appropriate? If I can give any more useful technical information, please ask.
Thanks in advance.
Hello
Usually it s not advisable to upgrade the CPU on laptops, because no one can tell if the laptop runs correctly and stable after the upgrade.
The heat and the temperature inside the laptop could be a serious problem.In any case, I think that the laptop supports an Intel 852GME chipset.
http://www.Intel.com/products/chipsets/852GME/index.htmThe Intel 852GME chipset is optimized for the Mobile Intel Pentium 4 processor, has a main bus at 533 MHz and up to 2 GB memory DDR 266/333/200 at high speed.
But I'm not sure about m making it s 479 or 478
-
a question about upgrading memory CF for Cisco 3745
As we know, the cisco 3745 has 2 locations CF. memory One is internal with a 32 MB of memory by default CF card, another one is external.
My question is:
1 is the same as the internal memory card CF CF external memory card?
2. If I choose the upgrade of the plant CF memory from 32 MB to 128 MB, which slot will be used? Cisco remove the memory of 32MB CF card and install a new 128 MB card in the internal slot or simply add an additional CF memory card through the outside slot?
Thank you!
Hello
the reference for the internal and external numbers are different, which suggests that they are not compatible. So you will have to specify what you want to, for example, MEM3725-32U128CF (which is the internal upgrade) or MEM3725-128CF-EXT (which is the external upgrade).
In all cases, internal and external cards are not cumulative, in order to get e.g. 128 MB flash, you must either internal, or external card with these 128 MB:
Q. can partition you the internal Cisco 3700 Series Compact Flash card and the card Compact Flash external to combine or separate them?
A. No, you cannot join two separate Compact Flash cards or you can their partition.
HTH,
GP
-
Question about upgrading RAM for a Satellite A110-133
The following ram would work on the laptop mentioned above?
Kingston KVR533D2S4 / 2 G 2048 mb so-dimm, 200 pin
Thank you.
Any input would be appreciatedHello
This page might be useful for you:
http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=24868&ft=m&St=3You need DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM barrettes.
But I doubt that the Kingston KVR533D2S4 / 2G 2048 mb would be fine because the A110 can be upgraded up to 2 GB, and in this case, you can only use 2 x 1 GB RAM modules
-
Question about upgrading CPU for Satellite L30-101
Is it possible to upgrade my processor from a 1.44 to what higher?
No, there is no way because:
-It s too expensive
-It s complicated Exchange when you´re no technician for laptop
-you won´t win any show (especially when the performance vs price comparison)Instead update your RAM and your HARD drive since that these components are comp. evolutionary and better will give you better performance.
Welcome them
-
Question about upgrade DDR2 for X 200
I want to improve my PC2 DDR2 memory up to 4GB (2 GB-implementation to date) and I don't know if I could do it anywhere I want (to people who know how it works) so I first look in my computer laptop-description and then I'll go to the 'compatible accessories' > there I found the upgrade memory : 2 GB memory - DDR2 PC2. (Model nr. PA3513S-1M2G)
Is this a good offer?
On this site, they say: 'Toshiba shop is not a Toshiba offer himself, but an offer of a trader. So what? I couldn't install it and I think that if I would, the warranty is broken! (break)?What could I do? Only go to an electronics market and get this installed and the warranty is still active, or what? I put t know what to do!
My system: X 200-21 L - work this update on my laptop?
Hello
I don't really understand you. Page 141 of user s manuals you can find the description on RAM upgrade. It that what is described in the public document which means this can be done by the owner of the laptop.
So what you need to do is buy the compatible module, follow this manuals and RAM upgrade. All that s!
-
Question about upgrading BIOS for Satellite P30 145
Hi all, first post!
I have just received notification that there is an update of the BIOS for my laptop, Satellite P30-145, I downloaded and tried to install it but I get this message "the size of the rom file is incorrect" ideas?
Hello
Seems Toshiba has released and document technical support for this newsletter.
I found this useful statement from Toshiba:I can't update my BIOS with the function BIOS Phoenix-file ZIP Windows XP Windows.
I always get an error message: the size of the ROM file is incorrect.http://support.toshiba-tro.de/KB0/TSB59014X0000R01.htm
I hope it helps.
But note; The update of the BIOS is always risky! If you have any problems with your laptop you n don't need to update the BIOS.
The bad BIOS or bad BIOS update procedure may damage the cell Board!
So take my advice and never change a running system ;)Greetings
-
Question about upgrading RAM on Satellite U400-138
Hello
My laptop model is Satellite U400-138, part number: PSU44E-00500JG3
Technology:
type: technology Intel Centrino 2 processor on processor Intel Core 2 Duo P8400, Intel GM45 Express chipset and Intel WiFi Link 5100
Clock speed: 2.26 GHz
Front Side Bus: 1066 MHz
level 2: 3 MB cacheOperating system:
Genuine Windows Vista Edition Home Premium (pre-installed, Toshiba-HDD recovery)System memory:
standard: 3 072 (2 048 + 1 024) MB
maximum extension: 8 192 MB
technology: DDR2 RAM (800 MHz)In intel webside one writes the following on my motherboard laptop specifications:
"1.2 Intel GM45 Express Chipset supported feature
All features supported by the Intel PM45 Express Chipset supported by Intel GM45
Express Chipset unless otherwise stated below. Additional features are listed below. "1.2.2 memory system «»
-Support to 667 MHz DDR3 then FSB 667 MHz isn't that. ""1.1 Intel PM45 Express Chipset supported feature
1.1.2 storage system
-Support for DDR2 and DDR3 SDRAM
-Support for DDR2 667 MHz and 800 MHz
-667, 800, and 1066 MHz DDR3 support
-One SO-DIMM connector (or memory) per channel
-Channel memory supported two Configurations
-Double-channel symmetrical (with Interleaved access)
-Dual-channel asymmetrical (with or without Intel Flex memory technology)
-Support for 8 GB of maximum memory
-scale 64 - bit per channel
-Technologies of 256 MB, 512 MB, 1 GB and 2 GB memory supported
-Support for DDR2 and DDR3, x 8 and x 16 devices
-Support for DDR2/DDR3 termination on chip (ODT)
-Supported partial written memory using data signals mask (DM)
-No support for chip quick selection mode
-No support for ECC
-No support for operation 1N. "http://www.Intel.com/assets/PDF/datasheet/320122.PDF
The question is...
I want to upgrade my portable computer system memory 3 GB DDR2 (800 MHz) RAM to 4 GB of RAM DDR3 (1066 MHz), which is compatible or not?
Respect,
enteoanaHello
In my opinion, you should follow specification not Intel and Toshiba. S Toshiba of info is based on own tests and facts.
So, depending on the specifications of Toshiba for the GM45 Chipset it is clearly written:Min(on Board) wheel capacity - DDR2 800 MHz 0 MB / 8 GB max
Type of extension of memory - DDR2 800 MHz 1 GB/2 GB/4 GB
Type of module - SO-DIMMSo if Toshiba write about 800 MHz modules, you must use the modules to them and not faster.
You may be able to use faster too, but they do not work with the maximum speed, but not going down to 800 MHz.If you want to use max RAM amount use recommended and tested 2 x 2 Go DDR2-800 (PA3669U-1M2G).
Indicated as compatible RAM, 4 GB DDR2-800 (PA3670U-1M4G).
Maybe you are looking for
-
Somehow the internet and my phone crashed. Called Vonage reset everything so time phoning and internet work, but I have lost e-mails after 16/02/15.
-
JETech 2010 keyboard no longer works correctly!
Keyboard no longer works. At least remove them and T keys do nothing. I have blue tooth, forgotten unit redefined and networks... Any other ideas please? Thanks in advance X
-
can I use my iMac 24 inch as a monitor for a pc
I need assistance with my Mac. I have an iMac 24 inches at the beginning of 2009 and its starting to bother me. Sorry, but I'm changing to a pc. I like to keep the iMac to a monitor. Is there anyway to use my iMac as a monitor for a PC.
-
Network share is protected...
How can I go about fixing this? I went to the sharing and there are no options for me to share with my network. All the answers? Please and thank you
-
Windows 8 and MS office professional 2010
Hello I am looking to buy a laptop HP 2000-2c32NR. It comes with Windows 8. The agent told me I can't install Microsoft Office Professional 2007 or Microsoft Office Professional 2010 on the laptop. I have licenses for both of my job. Is it true o