Question about view 4.6

Similar Questions

• Question about VIEWS

  I want to create a view for reports but the my data comes from data warehouse. Where do I need to create a view. It is in the database or DW. If I create a database view is the point of view is going to have the latest data as the base table...
  
  Concerning

  792011 wrote:
  Thank you for your quick response. I have a question. given that my data from the data warehouse that I create out there or I can create in DB

  Concerning

  I think you're confusing, datawarehouse by definition is a database. See the link below:

  http://en.Wikipedia.org/wiki/Data_warehouse

  The view must be created in the database!

• Question about viewing on Tecra W50-A-104

  HI, I red a good review on the Tecra W50-A-104 on notebookcheck and they say it rises from this Panel and it is a very good display:

  * 15.6 grips 16:9, 1920 x 1080 pixels, TOS508F, IPS LED, 92% sRGB, brilliant: No. *.

  But if I go to the Toshiba.de I see that specifications are:

  * type: anti-reflective display eDP Toshiba Full HD TFT high brightness with backlight LED, 16: 9 aspect ratio *.

  A TFT instead of IPS

  They are the same characteristics as the W50-A-116, which is available in my country, the Italy. I am interested in the W50-A-116 of course and I want to know if the 116 and 104 times the same mount slab IPS as says the review.

  Thank you
  Haitham Jaber

  Both Tecra models have the same part number - PT640E then I'm 100% sure that both models have the same display. It is 15.6 FHD 300 SFCL LD-DISH EDP (TFT Color LCD IPS) Full HD.
  I can imagine that the description on the Toshiba and some independent Web page is not the same.

  Tecra W50-A-116 with PT640E-06603KIT part number is available in Italy.

• Satellite L650-11R - a few questions about this

  Hello there :-)

  I have a few questions about my new L650.

  I've never had Toshiba notebook before so I apologize if some of these "quirks" are actually quite normal on this laptop. I really want to hear the views of other users L650.

  1)
  First of all, by the time I turned it on I saw gradient thin (1-2 mm) along the right edge of the screen that goes from the bottom up. Maybe "degraded" isn't the right word, but it seems that since two or three pixels are kind of discoloration or lose brightness/sharpness to the edge along the straight bezel. It is not really that visible, looks like the colors are desaturated a bit here or brightness is a bit lacking. He can be seen everywhere (bios or no color in Windows, but better in the lighter background).
  The left side (or other) seems ok, all this along the right edge is somewhat suspicious. If one can compare? I don't know if it's something to worry about or is just supposed to be like that.

  2)
  The other thing I noticed heating of the processor (Intel i3 330M) and GPU (ATi Mobility Radeon 5650). It's pretty hot here right now (I would say that the temperature is around 28 degrees Celsius when using cell phones). He is sitting on the hard surface (table) and nothing is blocking the vents.
  However, at "rest" (surf the web & regular light stuff), average CPU temp hovers around 58 ° C. It usually goes from 45 to 62 in just a few minutes after starting, and then I can hear and see (Toshiba PC Health Monitor) evacuate the kicks in. Temp goes back to 50 +, event stops and then the temp rises to 60 + until the vent is used again.
  During load full (Prime95 or some games), CPU is going all the way up to 75 degrees (the highest being 77). Fan runs at 75 to 77% during this time, never go faster.

  GPU idling is usually around 5 degrees above temp CPU (62-65). During full load (for example. Benchmark of Far Cry 2), I see a lot of stuttering with the latest drivers Catalyst and DX10 (not sure if the stuttering has something to do with heat), otherwise it is ok (no artifacts or anything like that). Temp of GPU during the loading goes up to 74-75, fan speed is locked at 30%, the frequency of the heart 5650 is 450 MHz. left side of the laptop (vent and below) is pretty hot, while the keyboard is warm (or slightly warmer who who).

  These time seems correct and safe in the long term? I'd rather events works all the time (they aren't really very strong) and keeping time less than 50, but there are just wishful pious bios control events and I can't control not the bios. :-)

  3)
  This is just General related products. :-)
  Official specifications of Toshiba L650 say ATi 5650 (between other low range GPU), but I saw a few specifications calling for there 5730 (same model 11R). Is there really a Satellite L650 with ATi 5730 GPU models?

  Sorry for the long post, I tried to include the best possible description that I could do. :-)

  Thank you in advance.

  Thanks for the additional info!

• Satellite U405D - several questions about overheating/disassembly/upgrading etc.

  Hello

  I have several questions about my old one by Satellite U405D-S2910

  1. when it works, after 2-3 hours (I run usually small programs such as safari, msn messenger and bsplayer) CPU gets 85 to 90 C (178-188). When I play age of Empires 2 (come on, its an old game) like 2-3 hours, it stops. What could be the possible reason? Furthermore, let me inform you about the climate of the city I live, 30 c temperature - humidity 25-35% (today).
  PS. CPU is AMD Turion 64 X 2 Dual-Core Mobile Processor. Model RM-74

  2. I'm going to disassemble my laptop in order to clean its cooling units (I think at the rate of overheating is this). It does seem like a desktop computer, so complicated. Ive seen a disassembly not to not (btw, its so difficult to spell dismantling :) I think Im going to do this. What are your suggestions on this subject? experiences could help me?

  3. my laptops is Ram 2x2gb PC5300 DDR2 667 MHz SDRAM memory, I want to replace RAM memory 2x2gb MACH XTREME DDR2 1333 MHZ CL9 NOTEBOOK. Should I do it? Fit my portable, stable work? any suggestions?
  PS. motherboard chipset AMD M780V

  4 - Finally :), should I use OS 64 - bit or 32-bit OS (win7)? what OS would you use if you were me?

  Thank you.

  Hey Buddy,

  1 + 2. I think everything is related to a higher internal temperature and you must clean your laptop using a jet of compressed air. That is why it s not necessary to remove, just blow softly and soon the air through the laptop. You can buy such compressed air which squirts of each computer store I think and it takes only 5 minutes.
  You can find a useful article about this here:

  3. in my opinion he should forget this update! The speed of the RAM is related to the FSB of the CPU and as much as I know about Satellite U405D it s 667 MHz so it s already the RAM faster than you can have. Save your money and buy a larger HARD drive or in the best case a SSD that can really improve the performance!

  4. in my view, the answer is clear: Windows 7 64-bit.
  Only a 64-bit OS supports full 4 GB of RAM. ;)

• A few questions about the Satellite A100 PSAANE

  Hi friends,

  I have a Toshiba Satellite A 100 - PSAANE with Vista Home Basic preinstalled in it.
  Now, I have a few questions... I mention below: -.

  (1) if I want to format my laptop, I need a CD to install for Vista Home basic... then I don't have this Toshiba CD when I bought the laptop. So how do? question: How can I format it?

  (2) can I change my Vista Home Basic to windows XP? I think it's much faster than this one. is it advisable?

  (3) I have a GB of RAM in the laptop. Increase the RAM? I think that my laptop has become to slow down. is it advisable?

  (4) and on my screen, everytime I try to change my profile screen to windows Classic view, my screen begins to blink. and after a while, the screen turns off. So I can't change that. I put the color scheme of windows vista only. What to do about that?

  Please help me friends. Thanks in advance.

  Kind regards
  Perkins

  Hello

  Here, a few questions about the number:

  (1) usually, you should get the Vista Toshiba Recovery DVD. If you didn t receive this DVD then you can order it here https://backupmedia.toshiba.eu/landing.aspx or you could install the disc of Microsoft Vista.

  (2) of course, you can do this. I think that Win XP drivers can be downloaded from the Toshiba driver page.

  (3) Yes, you can upgrade the RAM. For more information, see your manual or search on this forum for similar topics

  (4) maybe it s associated with the graphics driver. Check if you can update. I would recommend additional check if you are using the latest version of the BIOS

  Welcome them

• Ask questions about the HP Pavilion 14-V041TX Bluetooth

  Hello, sry for asking questions about simple things.

  How to activate bluetooth for laptop HP Pavlion 14-V041TX?

  Or how to bluetooth to detect other bluetooth devices?

  coz already try to use my smartphone, but cannot detect any bluetooth device or laptop.

  for what I know, I already install the driver for bluetooth.

  Maybe there's another driver, that I'm missing?

  Thank you.

  SRY for my bad English.

  HI @Ton1_qrenz ,

  Welcome to the HP Forums!

  It's a great place to find answers.

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  No worries about your English.  I believe that I understand your question, and if not, you can specify if you must post back.

  I understand that you are unable to detect Bluetooth devices.

  Here is a document to help you with this company. There are links that it contains other documents that can also be of assistance.

  Understand and troubleshoot Bluetooth wireless technology (8.1 Windows, 8, 7, Vista, XP)

  If the problem persists, try the following steps.

  Step 1. Go to Device Manager
  Step 2. Right click on "Bluetooth device" you want
  Step 3. Select "update driver software... »
  Step 4. Choose "Browse my computer for driver software".
  Step 5. Choose "Let Me pick from a list of drivers for devices on my computer.
  Step 6. Select "Ports (COM & LPT)"
  Step 7. Select "Microsoft" to the list of "manufacturers".
  Step 8. Finally select "Standard series via a Bluetooth connection.

  If you are unable to connect to a Bluetooth device, try the following:

  Step 1. Search for 'Change device' in the start menu in Windows 8.
  Step 2. Click on where it says change device installation settings.
  Step 3. Select No, let me choose what to do option.
  Step 4. Check the automatically get the device app option
  Step 5. Click on save changes to save the settings that you select

  So, you can try this

  Step 1: Go to RUN (Windows Logo + R) and type "services.msc" and Enter
  Step 2: Now find 'Bluetooth Support Service' and double click it
  Step 3: Now click on the Log on tab and type "Local Service" without the quotes
  Step 4. Click on "account".
  Step 5: Now remove any authorization of passwords the password field blank
  Step 6: Below the upper left title should be a hyperlink 'Start' click

  You can also view tab management power and unchecked the box "Allow the computer to turn off this device to save power."

  If it is still not resolved, I suggest contacting HP support for further assistance.

  Please contact our technical support at the 800-474-6836. If you are outside the United States / Canada region, please click the link below to get help from your region number. Phone goes everywhere in the world

  Good luck!

• General question about the Browser element

  Will look for an alternative, I found the Browser element and now I have a few questions about that:

  As I am not yet experienced on the Interfaces of Java development, I was wondering if following senario is possible:

  Have some HTML Pages which do the job of the Interface.

  If you submit a form, the JAva Base program (the Master application) process all Information.

  If you are viewing a list, the info is from a json of the Base program output.

  As the Communication Server Client HTML, the only difference is, that all communications remains inside the app.

  Is this possible?

  I can't speak to the idea of dealing with the entry of html, but I can confirm that it is possible for an application program to create a html page and providing the BrowserField for display.

• General questions about errors in eventvwr

  Greetings.

  I have a general question about some failed modules are stored in the Windows Event Viewer.

  An error leading to the crashes some applications that I've seen several times now when supporting computer problems is something like this:
  (Windows error reporting) Fault bucket, Type 0, name of the event: PCA2, (...) P1: application.exe, (...)

  I wonder what this 'PCA2. Which is a kind of module Windows handles tasks such as allocating memory or smth. Like this? What could be the cause of these errors (physical memory problems / corrupt swap file / insufficient rights?)

  Same Question for the application falls down because of "kernelbase.dll" as in:
  (Application error) Failing application: application.exe, Version: 0.0.0.0, (...) Failed module: KERNELBASE.dll, Version: 6.1.7601.18015, (...) Path of the failing module: C:\Windows\syswow64\KERNELBASE.dll (...)

  What is the .dll file and what could possibly cause kernelbase.dll Fault?

  The application can be a bit buggy, but I wonder what could possibly cause these accidents and if there is a way to fix these problems - or what dev did wrong.

  The two errors occur mainly on x 64 systems - especially Windows 7/vista

  Kind regards

  With application errors, the application is called everything first and the module he collaborated with is named second. Normally you should try to reinstall the application if you see not to repeat the mistakes. If this does not work, you go to the forum on the application to see if other users see the same error. There may be a bug in the application.

  The observer of the Application event log contains Information reports (event ID: 1001) for errors where the details were sent to Microsoft for review. You will find that there are corresponding to the event ID: 1000 reports errors, either in the system or Application logs. These reports are also included in the center of the Action. Center type action in the area of research above the Start button and press ENTER. Click on the arrow pointing downwards to the right of Maintenance, and then click view reliability history. The errors reported are the Red orbs with a white cross. You can search for solutions to problems, but occasionally you get a significant response from Microsoft.

  I can't tell you what it means PCA2. Google did not find a significant result. The reports themselves are not unintelligible, although I have never tried to understand the meaning of a particular report. I have extracted what, in my view, is a starting point of two reports:
  Event name: PCA2 = P1: motherboard_utility_onoffchargesetup.exe P2: 4.65.0.0

  Event name: PCA2 = P1: setup.exe P2: 11.0.0.28844

  You have the app in the boredom and the version of the file. These details have been extracted a file of information system to a computer with a card mother Gigabyte. So, you see I have a starting point, if I wanted to determine the cause of a failure.

  I will say before you go dive deep into each event ID: 1001 report that many are not easy to even begin to understand. However, they can provide useful clues.

  KERNELBASE.dll is likely to be the module with which the application works. You need to focus on the application.  KERNELBASE is probably preceded by P3 or P4 in the report?

  General remarks on the event viewer:
  http://www.gerryscomputertips.co.UK/syserrors5.htm

• Small questions about Dataguard

  Hello

  I have a few questions about Dataguard. I'm new to DG, carry me so for the display of these fundamental questions:

  We plan to install Oracle 12 c to Win 2012 R2 with primary and physical intelligence on different physical servers. We are looking for HA solution, but cannot afford to license CARS. The two primary & Eve are going to be in the same data center connected via a 1 gigabit network. So I have a few questions related to it.

  (a) since both of our primary & Eve is going to be in the same data center with good connectivity. Can I assume that although Data guard is more DR solution, in our case it would be HA solution since we have no network latency.

  (b) is it safe to assume that where primary fails, then the day before can automatically take the role of primary education without any manual intervention, possibly using Dataguard broker?

  (c) so I understand that where primary breaks down, the existing connections transfer automatically from primary to standby db (most recent primary), but how my web based java application will know that more recent connections must be sent to the standby db Server (more recent primary)? I guess net Oracle has a provision to handle this? Who can be automated?

  (d) given that I have only 2 physical servers, can I deploy broker Dataguard on a normal PC (since it is a thin client) assuming the PC is kept in the data center and is online 24/7?

  (e) I was reading about the modes of Protection, account required to our current situation & infrastructure, I choose 'Maximum availability Mode' instead of 'maximum Performance '.

  (f) what is your point of view about Oracle integrated security? I hear too much on Oracle failsafe, because people generally go to a combination of CARS & dataguard for HA? We have a few additional storage that can be shared between the two servers, but I feel with literally no DG network latency can provide us HA.

  Concerning

  Learner

  (a) since both of our main & secondary is going to be in the same data center with good connectivity. Can I assume that although Data guard is more DR solution, in our case it would be HA solution since we have no network latency.

  Well it will not provide the level of HA that is RAC. RAC is a Transparent Application failover. With a physical standby, you need to apply some delay for a failover operation. You can implement the observer that can automate the failover and reduce the time.

  (b) is it safe to assume that where primary fails, then the day before can automatically take the role of primary education without any manual intervention, possibly using Dataguard broker?

  This isn't really the DG broker, but rather the observer you will need to implement. The DG broker automate failover. It will be the observer who "sees" (where its name) that the principal is down and initiate the failover process. To do this, the observer will use the DG broker, so it will be necessary.

  (c) so I understand that where primary breaks down, the existing connections transfer automatically from primary to standby db (most recent primary), but how my web based java application will know that more recent connections must be sent to the standby db Server (more recent primary)? I guess net Oracle has a provision to handle this? Who can be automated?

  You'll want to read on the QuickStart failover. http://www.Oracle.com/technetwork/articles/smiley-fsfo-084973.html

  (d) given that I have only 2 physical servers, can I deploy broker Dataguard on a normal PC (since it is a thin client) assuming the PC is kept in the data center and is online 24/7?

  The DG broker is required to run on the database server. The DG broker will run on the primary and standby. I think that what you're asking really anything is if the observer can run on a PC. Yes it can. However, it is probably not a good idea. A PC will not have the internal hardware redundancy, a server can have. If the PC can fail more often than to a server. And if the gods are bad, it will fail when you most need.

  (e) I was reading about the modes of Protection, account required to our current scenario & infrastructure, I choose 'Maximum availability Mode' instead of 'maximum Performance '.

  Your choice should depend on the amount of data loss is acceptable.

  (f) what is your point of view about Oracle integrated security? I hear too much on Oracle failsafe, because people generally go to a combination of CARS & dataguard for HA? We have a few additional storage that can be shared between the two servers, but I feel with literally no DG network latency can provide us HA.

  Oracle integrated security only works on Windows with a MS Failover Cluster. Real DBAs do not have Oracle on MSFC.

  See you soon,.
  Brian

• Question about installing windows on a Macbook Air

  Hello!

  I was just wondering if I would be able to use the student updated Windows Upgrade Pro 8 (the http://www.microsoftstore.com/store/msapac/en_GB/pdp/Windows-8-Pro-Upgrade---Student-Offer/productID.282175100) to install Windows 8 on my Macbook with BootCamp. Or Windows products 8 student updated only applies for machines with existing versions of Windows installed?

  Thank you!

  Hi Tatiana,

  If you are still looking for more details here is what, in my view, could help you.

  As Shenan Stanley says, if you do not have a qualifying previous OS such as Windows XP, Vista or Windows 7, you can not use the Windows 8 Pro Upgrade. Also, here is a link that talks about

  Boot Camp: Frequently asked questions about the installation of Windows 8

  I hope this helps.

• Question about importing video footage in Premiere Pro

  I'm new to Premiere Pro and have a question about it. I need to move all my videos on my new computer (Windows) from my old computer (iMac running iMovie). Where should I store my images so I can access inside Premiere Pro? I just need to store everything on a hard drive, and then create inside Premiere Pro projects when I need to import images in, or should I create a 'library' to store all my movies in? Setup bridge would be another beneficial way to view my videos (I use Lightroom for my photo library)? I'm just trying to discern the way I need to store and organize everything in order to get started with Premiere Pro. Thank you!

  Premiere Pro has no capability of database for the media in general, only in a specific project. 'Import' is not like in Lightroom, it does in PrPro is tell her where to look for the media while working on this specific project.

  So... you need create your materials on a particular disc, presented in a way that you can find them in a folder structure you design.

  A typical use of PrPro spreads parts on several disks. OS/programs on the system drive, a disk each cache PrPro & cache of database files; preview files; and project files. Media probably on another drive and exports on a final drive.

  Access the disk cache & cache database files, preview files and project files are the two ways of reading & writing, in addition to being constant. Multimedia files are used unalterable and exports only Scripture, their connections can be a little less robust.

• Questions about the terms and conditions

  Dear team of Adobe Stock,

  I am considering a subscription for an e-commerce site that I am developing. I have a few questions about the terms and conditions:

  3.5 social media use. You can view or download an unmodified version of the book on the Social media Site if (A) you include a notice of copyright in the work itself (© author name - stock.adobe.com) and (B) the terms of use governing the Social media Site do not include any provision that would grant exclusive rights or the ownership of those works or alterations to anyone. "Social Media Site" means a website or application that puts the main emphasis on facilitating social interaction between its users and allowing users to share content in such social interaction

  What I have to insert in each post on social media on behalf of the author? Generally, this information is displayed only for free images. What I have to insert this information even if I signed up for a plan?

  Thank you

  Hello

  Please see the link below for help:

  http://wwwimages.Adobe.com/content/dam/ACOM/en/legal/servicetou/Adobe-stock-additional-ter ms_20160119.pdf

• (Basic) question about layers

  Hi all!

  I'm a little Photoshop-beginner and I have a question about layers, just as the title suggests. I have a bunch of PNG files which are the design of what happens in the UI (user interface) for an app Anyhow, I need to break down each graphic element in the files (for example, the logos, the "buttons", the small images) in different layers. How this is done more efficiently?

  Any help would be much appreciated and I hope that I have explained the task well, but if you need additional information about the files or the task, I will be happy to provide that.

  Thanks in advance,
  EM

  Use the Quick Selection tool to select each item and then press Ctrl + J (Cmd + J) that will create a separate layer. You can select with the rectangle selection rectangle if you want straight borders. Each item will have a transparent background which will allow you composite with other pictures or blank documents. Click on the symbol of the eyeball in the layers palette to the right to turn on and off and then you can view layers individually.

• The specific question about the placement of an image into text.

  Hello, I had a question about the placement of an image into text.

  I did the contours to create text to place the image inside. My text is 5 words and two lines inside the box.

  When I do create contours he gives me 2 transparent route separate layers for the top and the bottom line.

  How will I be able to do that in a single layer of compound to place image that expands to the two lines?

  First of all, there are two ways of describing the type. The default value creates anchored objects. You want a separate object, so hold down the Option/Alt key when you create outlines. Drag the new contours to separate the text block.

  It is useful to open the layers panel and view the contents of the layer. You have created a group which consists of two transparent traces. In the layers panel, expand the layer so you can see the structure. Shift-select the two transparent traces. (Make sure that the group is not selected.)

  

  Then choose object > tracks > make a compound path. This makes the two transparent tracks into one. Then, you can place or paste into the single compound path.