Question about vMotion unable to migrate due to the incompatibility of SSE4.1

Similar Questions

• I have CS5 on Windows desktop 8.1 which I'm unable to update due to the repeated download error (no error number). I uninstalled and reinstalled CS5 but the same error occurs. I have same CS5 on Windows 7 laptop which seems to be up-to-date. What's wrong

  Issue. I have CS5 on Windows desktop 8.1 which I'm unable to update due to the repeated download error (no error number). I uninstalled and reinstalled CS5 but the same error occurs. I have same CS5 on Windows 7 laptop which seems to be up-to-date. What is the problem please?

  Hi Peter,.

  Please see the updates

  Hope that helps!

  Kind regards

  Sheena

• Restore of VSS snapshot fails due to the incompatibility of serial SCSI

  Hello

  I have a win2k12R2 with unique VDisk Vm. A triggered a quiesce VSS on this virtual machine operation and taken a snapshot of the VDisk. Clone a virtual machine of the instant Vdisk and the virtual machine is not booting. If I'm not using VSS quiesce virtual machine, repeat the experience, the virtual machine is unable to start. Since the tedious debugging, finally found it's due to the incompatibility of serial SCSI. Looks like VSS is striking SCSI serial number in the BCD. When the virtual machine is restored from this VDisk, at startup, VM makes a SCSI inquiry to get the serial number of the drive. If the n series shadow does not, VM is not start. In this case, as long as the disc is instant, hypervisor return different serial number.

  The question is, where does the VSS stores this information to SCSI serial number? Is there a way to avoid this? I use the hardware vendor. I need uniform application snapshots of this virtual machine. If I am able to take consistent snapshots of application and not be able to start the virtual machine that, it is useless to take snapshots :). I'm stuck here, any suggestions how to avoid this?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Problem with the latest Adobe Reader 11.0.10 - Adobe Reader cannot open protected mode due to the incompatibility with your system configuration.

  Since the update to the most recent v11.0.10 of Adobe Reader, getting a Safe_mode Adobe Reader: Adobe Reader cannot open protected mode due make an incompatibility with your system configuration.  Want to open Adobe Reader with protected Mode off?

  The solution I was looking for was to launch Adobe Reader protected mode.

  I couldn't identify issues preventing start Protected Mode.  What ended up working, was complete, followed by a reinstall uninstall.  Now we can load drive in Protected Mode.

• Question about MSD + upgrade and migration applications

  Hi all

  I am running:

  TMS 13.2

  TMSPE 1.0

  The two co reside on a Windows 2003 server, pointint in an external box of SQL.

  We also organize TCX 2.3 on our Exchange.

  Now that our server guys have * finally * installed the service pack required on the Exchange, we are ready to migrate to TMSXE but also to upgrade the TMS and TMSPE.

  So we want ot go to:

  TMS 14.2.1

  TMSPE 1.1

  TMSXE 3.1

  In addition to migrate a Windows server 2008R2 TMS + TMSPE.

  I know the different individual guides to upgrade as well as the dependencies between TMS and TMSPE/TMSXE versions.  I'm hoping to do the upgrade and migration all in one and am hoping to get some tips on the best order to do everything.

  My first question - decomission the 13.2/TMSPE server 1.1 TMS, that I can install TMS 14.2.1 and TMSPE 1.1 on the Windows Server 2008, they point to the relevant databases and allow upgrading from there? Or do I need install the new versions TMS/TMSPE on the old server, first of all, upgrade the databases and then migrate?

  Second question - before all this, I run the TMSXE migration tool to extract the data 2.3 TCX, uninstall TCX of Exchange, TMS upgrades and then install TMSXE 3.0/3.1 at the end?

  As all this is running on the virtual machine I'll instant just in case.  Advice on the issues listed above, or general advice about these upgrades would be appreciated

  Hi Nick, IMHO, I suggest you first migrate your 2.3 TCX to TMSXE 3.0.2 by this TMSXE 3.0 installation guide, and then pass the TMS and PE later.

  Yes, VM snapshot backup option before any upgrade is fine.

  BR, Mahesh Adithiyha

• Question about Vmotion

  Guys,

  I finally had time to raise a second cheap esxi host today.  I installed vShere 4.  The hosts are always 3.5.

  I tried vmotion as part of my test, but I couldn't make it work.  There are two questions:

  First issue - incompatible processor.  I followed KB 1993 and tried to hide "NX/XD.  A host has a celeron 1.6 and the second host has a core quad (q9550).  I'll probably have to replace the host with the celeron cpu.

  Second question - I get this error "currently connected NIC 'NIC 1' uses 'Mtrac' network, whi is not accessible."

  I am interested in getting this fixed.  Comes from the machine, I tried to move the "Mtrac" network adapter.

  TIA,

  TNT

  To answer your questions:

  1. Architecture of the Celereon and q955 chips you use is so dramatically different that I don't think you'll ever get to work for vMotion - VCA is really aim clients whoare purchase processors in the same family or relatively close to the generations.

  2. If networking on the ESX servers must be the same - in other words your VM has been connected to the virtual MAchine port group called Mtrac on the source host and on the other host there was no virtual machine port group with this name-

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Question about 10g to 11g Migration

  Hi all
  
  I'm working on the upgrade of 10 g and 11 g. I have a huge RPD divided into 10 projects so want to do the upgrade for the 5 first projects and related catalogs and then rest five projects
  
  I want to know when I convert the 5 later, if it is possible to merge them with the ones I've already updated? If Yes, then how? In short, is it possible to do the migration on the basis of the project? What could be the road of blocks as appropriate.
  
  If so, please let me know how or guide me to a good documentation/blog.
  
  Thank you
  Ronny

  Hi Ronny,.

  Divide the existing SPR in two with 5 projects each and also the webcat with respective folders of dashboard. Upgrade the first split in 11g, later, you can upgrade the second set of files and merge with the set of files upgraded to 1.

  Kind regards
  DpKa

• Question about reinstalling Windows after virus/malware crashed the system

  OK, I'm not exactly super tech savvy but I can manage.  Here's my dilemma.  I clicked a bad link in a Yahoo search and started getting all sorts of flashing messages that my laptop has been infected.  The next thing I know... Windows (I have Vista) crashed and does not now.

  Question #1 - so... can I spend $85 and make it my buddy to the computer to reinstall Vista... or can I invest in upgrading to Windows 7?

  Question #2-si I do it myself, can I just go ahead an installation of Windows 7 since I have no operating system on it because Vista won't load?

  I'd appreciate any help I can get with that.  I really think that whatever it is, I would be smart to buy Windows so I have to drive since it is not come with the laptop or my all-in-one.

  Thank you!!!

  Hello

  If necessary, you can record all necessary data (files) by putting the hard drive as 2nd in another computer
  or in an external box and copy of the data on the removable memory (CD, DVD, USB key or)
  others).

  The physical disks in Vista can be purchased cheaply system machine since you already own windows.
  Ask them about Windows 7 as they could also make a case here. Normally, it would be more advantageous for you
  to buy the disks of Vista and then upgrade to Windows 7 (unless the system manufacturer has a special offer).
  Before upgrade you to Windows 7 make sure that the system and the software will run you on it.

  To run the Upgrade Advisor you will need Vista work. Check with your system manufacturer support
  and/or support of any specific manufacturer of the device to make sure the drivers are available for your system.

  Windows 7 Upgrade Advisorhttp://www.microsoft.com/windows/windows-7/get/upgrade-advisor.aspx

  Also check the Compatibility Center
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Questions about serial port read and write at the same time

  Hi I create a user interface for the communication serial port, where there are essentially 2 front panels, where the user enters commands one and the other where the prints of UART is delivered. I thought initially using a state machine but the reading and writing may be independent sometimes and so I can't rely on States. I searched a bit on the forum and he left me even more confused. Help, please.

  (1) in a thread that sessions visa duplicated has been used for writing and reading at the same time, is it recommendable? How will this affect performance?

  (2) essentially when the vi is reading data are it must constantly view as well, however, someone said that it takes too much memory to use shift registers, so how do I go about this? If using a State in queue after the loop of reading it affects the playback loop and be sequential?

  In addition anyway is to move the cursor to the latest data from the indicator

  (3) for the control of the user input, assumes that the user has entered an order in the control and press ENTER, then writing visa is launched, but if it comes in another string and press enter then write must be called again... is - it possible? will detect the previous commands in the control of compensation?

  (4) according to my understand the expectation for the event do not monopolize resources and writing can go in parallel, am I right?

  Thank you. I have attached a very basic vi which took me to the point, but I want to make it more robust. Please help especially in the part of the user interface.

  su_a,

  (1) you can have only one session to a port. Several UART can handle full duplex so performance is not affected.  At flow rates of high data and large amounts of data, buffering and latencies of BONE can become a problem.

  (2) who told you that shift registers using too much memory? Shift registers are usually the best way to transfer data from one iteration to another. String concatenation inside a loop (registry to offset or not) causes the chain to develop and may require re-allocation of memory.  Your VI never clears the string so its cold length become very large.

  Generally, you do not have an active cursor on an indicator.  If you want to always display the most recently received characters and turn on the vertical scroll bar use a property node to keep scrolls to the bottom.  This can be annoying for users if they attempt to manually move the scroll bar and find that the program continues to move it back automatically.

  (3) if the user has changed the value in the chain of command, when he hits enter the modified value event fires.  Simply strike brace does not change the value and does not trigger the event.  Not control need to be erased, but the value that he has to change.  If you want to send the same command again, have a button send a command may be a better choice.

  (4) write is a case of the event.  It is not in parallel with anything.  The structure of the event do not monopolize resources.  The other loop will run while it waits.

  The event loop will not stop when you press the STOP button. Probably it wll take two command: change events of value after JUDGMENT before any loop stops.  Replace the Timeout event (which never expires) with a STOP: value change event and a real wire of this judgment to the Terminal endpoint.  Remove the local variable.  Make mechanical locking when released.

  Lynn

• Question about Messenger's Hotmail (couldn't find the appropriate above heading, but hope someone can help me)

  This is regarding Hotmail and Messenger to the breast.  Every time I answer an e-mail or send one to someone in my contacts list, the next screen goes to "Do you want to add this person to Messenger" it's a pain having to click on 'no' every time especially if you are engaged in a back and fourth conversation.  I have looked everywhere and cannot find a way to prevent this default value for this question.  Can someone please help/Advisor.  Thank you.

  http://www.Microsoft.com/communities/newsgroups/en-us/default.aspx?DG=Microsoft.public.Windows.live.Messenger

  Discussions in Windows Live Messenger

  They will help you with your WLM questions when repost you your questions in the highest Windows Live Messenger Newsgroup.

  See you soon. Mick Murphy - Microsoft partner

• BlackBerry App world & Marmalade - unable to update the application due to the incompatibility of the Package Id

  When you try to submit an upgrade of my existing BlackBerry PlayBook application, my .bar file is rejected due to incompatibility of package-id.

  I looked at the content of the folder bar and compared it to the original version that I presented. Indeed, the package Id has changed.

  What has not changed, it is the id of the application signing certificate or id of the author. The original was presented with marmalade version 6.1, and was built with marmalade version 6.2.

  Any idea on what is causing this discrepancy? Y at - there no fix for this other that screw up my existing version and from new BlackBerry App World? I really want to do because my clients lead are no longer updated.

  In fact, I finally could get an it again. I run the tool for configuring Jam once more, then updated the packages of Marmalade by running the .mkb file. After these two steps, my release was accepted as being compatible with my previous version.

  Thanks for the work around to the subject of manually update the configuration file. I'll take advantage of that in the future if need be.

• Question about multiple instances of Thunderbird running at the same time

  I read that when you start Thunderbird by clicking on its icon or the shortcut must only load once, even if you click on it several times. It should be just a window of TB. If I click on the shortcut/TB desktop icon, it behaves like that. I can click several times and that a single TB window will open and be active.

  However, if I run the 'quick launch' TB on my windows 8.1 (or no matter what windows) taskbar, I get mulitple TB windows to open, as much as I want. So if I click on TB icon in the quick launch once, I get a single instance of it. Twice, I get two, and etc. In the quick launch any program behaves like that. He starts programs with a single click and launch again and again.

  Only, I click it once and get an instance which is good and how it should be. But this behavior with the quick launch is ok? It must do this not with Thunderbird? Thank you.

  There is usually no advantage by running multiple instances of Thunderbird, unless specifically do you these race with different profiles. In practice, if they are allowed to use the same profile, the first Thunderbird should should acquire the profile and therefore block the others, although this may not become apparent until you try to salvage something, for example, a message, or to change certain settings.

  Your multiple Thunderbird work successfully? They all show the same mixture of accounts, folders and address books? Can all or part of them save and make changes?

  If this is the expected behavior, (i.e. some "typical" windows) I do not like; He does not play well with profile blocking and I think that lead to problems.

• Question about iCloud drive and a Mac in the Mavericks

  Hello..

  I have an iMac oldest still running v10.9 Mavericks who is stable, so I really don't want to spend it to El Capitan so I need clarity on something.

  If I edit a document on the Mavericks, it does not update on devices with iCloud drive

  Is this correct?

  Thanks in advance!

  Carolyn Samit wrote:

  Hello..

  I have an iMac oldest still running v10.9 Mavericks who is stable, so I really don't want to spend it to El Capitan so I need clarity on something.

  If I edit a document on the Mavericks, it does not update on devices with iCloud drive.

  Is this correct?

  Thanks in advance!

  Yes, according to iCloud Drive FAQ - Apple Support:

  You cannot use iCloud Drive on your devices until you update your iPhone, iPad and iPod touch to the latest version of iOSand your Mac to the latest version of Mac OS X. If you already upgraded and you need to use a device that does not support iCloud by car, you can still work on your documents locally, but they will not be aware of the documents on your devices up to date, or on iCloud.com.

  In addition, the system requirements for iCloud - Apple Support should be useful.

  

• Unable to play due to the screen resolution spintop.

  Original title: I don't know if I have the Aero, but I have problems with spintop games and screen resolution

  double it up, so I'm not able to play games on this computer but I can't play on my laptop. He said something like 800 x 600 x 85 and my screen resolution is 1360 x 788. the display is 1.LD - 2685VX LANDSCAPE. Someone please help!

  Hello

  1. what version of Windows are you using?

  2 have had any changes made to your computer before this problem?

  Try to change the resolution of the screen and check:

  For Windows Vista and Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  See also: http://windows.microsoft.com/en-US/windows7/Diagnosing-basic-problems-with-DirectX

  For Windows XP:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_change_screen_resolution.mspx?mfr=true

  Let us know if it helps.

• McAfee bought unable to download due to the AVG online

  I bought a total protection McAfee online but I get the message cannot download McAfee you must uninstall AVG, I tried to do but every time that I re boot my laptop that AVG is always there, which can make?

  Try to run the AVG Remover utility:

  AVG Remover(32bit) 2012 (avg_remover_stf_x86_2012_2125.exe)
  AVG Remover(64bit) 2012 (avg_remover_stf_x64_2012_2125.exe) http://www.Avg.com/us-en/utilities Good luck