Question about 10g to 11g Migration

Similar Questions

• 10g to 11g migration

  Hi people,
  
  I need some clarification about the migration of things.
  In fact, we expect migrate Oracle 10 g and 11g.
  I want an idea y at - it no impact in the pool of connections from Weblogic migrate Oracle 10 g 11 g and y at - it no Pro * impact of compilation as well c.
  Please help me...
  Thanks in advance!
  
  Renon-

  Double post...

  Please refer to

  10g to 11g migration impact

  Concerning
  Rajesh

• Web Service security settings of 10g and 11g Migration

  We will migrate a complete Application of the ADF from 10g to 11g. We got all this work, but the web services. It seems that we learned the work of web services, but the security settings for the web service are very different and I have difficulties to make them work.

  For example, we have a customer's web service that has a X 509 certificate for authentication. We use the WSS 1.0 safety and I chose in the Configuration of the customer strategy: "oracle/wss10_x509_token_with_message_protection_client_policy and in 'Select credentials', I use https identification information."

  However, I get the following error when I try to use the web service pointing to the customer: Note: I also detached the client and deleted the credentials and get a SIMILAR error.

  < javax.xml.ws.soap.SOAPFaultException: WS-Security treat failure: FAULT CODE: InvalidSecurity MESSAGE of ERROR: header missing WS Security in the SOAP message >

  < to com.sun.xml.ws.fault.SOAP11Fault.getProtocolException(SOAP11Fault.java:197) >

  < to com.sun.xml.ws.fault.SOAPFaultBuilder.createException(SOAPFaultBuilder.java:122) >

  < to com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:125) >

  < to com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:95) >

  < to com.sun.xml.ws.client.sei.SEIStub.invoke(SEIStub.java:136) >

  So any that I have attached a customer or have not a joint, I get the same error. An idea that I am wrong?

  Thank you

  Okay, figured it out. I had to use ClientConstants to set the web strategy and set the OWSM political Director to use the appropriate strategy.

  The ClientConstants code is:

  SecurityPoliciesFeature = securityFeatures

  New SecurityPoliciesFeature (new String() {"oracle/wss10_x509_token"});

  In InboundOutbound_Service = new InboundOutbound_Service();

  InboundOutbound svc = in.getInboundOutboundPort (securityFeatures);

  String urlLn = this.getURL ('url');

  BindingProvider bp = svc (BindingProvider);

  Card reqContext = bp.getRequestContext ();

  reqContext.put (BindingProvider.ENDPOINT_ADDRESS_PROPERTY, urlLn);

  reqContext.put (ClientConstants.WSSEC_KEYSTORE_TYPE, "JKS");

  reqContext.put (ClientConstants.WSSEC_KEYSTORE_LOCATION, "web.jks");

  reqContext.put (ClientConstants.WSSEC_KEYSTORE_PASSWORD, "pw");

  reqContext.put (ClientConstants.WSSEC_ENC_KEY_ALIAS, "keyalias");

  reqContext.put (ClientConstants.WSSEC_ENC_KEY_PASSWORD, "pw");

  reqContext.put (ClientConstants.WSSEC_SIG_KEY_ALIAS, "keyalias");

  reqContext.put (ClientConstants.WSSEC_SIG_KEY_PASSWORD, "pw");

  reqContext.put (ClientConstants.WSSEC_RECIPIENT_KEY_ALIAS, "serveralias");

  Here is a picture of link at all that I found useful:

  https://blogs.Oracle.com/OWSM/entry/owsm_concepts_11g

  http://docs.Oracle.com/CD/E21764_01/Web.1111/b32511/setup_config.htm#BABJHIBI

  Using Oracle Web Service security policies

  Review of the architecture of Oracle WSM in Oracle Fusion Middleware

• Question about MSD + upgrade and migration applications

  Hi all

  I am running:

  TMS 13.2

  TMSPE 1.0

  The two co reside on a Windows 2003 server, pointint in an external box of SQL.

  We also organize TCX 2.3 on our Exchange.

  Now that our server guys have * finally * installed the service pack required on the Exchange, we are ready to migrate to TMSXE but also to upgrade the TMS and TMSPE.

  So we want ot go to:

  TMS 14.2.1

  TMSPE 1.1

  TMSXE 3.1

  In addition to migrate a Windows server 2008R2 TMS + TMSPE.

  I know the different individual guides to upgrade as well as the dependencies between TMS and TMSPE/TMSXE versions.  I'm hoping to do the upgrade and migration all in one and am hoping to get some tips on the best order to do everything.

  My first question - decomission the 13.2/TMSPE server 1.1 TMS, that I can install TMS 14.2.1 and TMSPE 1.1 on the Windows Server 2008, they point to the relevant databases and allow upgrading from there? Or do I need install the new versions TMS/TMSPE on the old server, first of all, upgrade the databases and then migrate?

  Second question - before all this, I run the TMSXE migration tool to extract the data 2.3 TCX, uninstall TCX of Exchange, TMS upgrades and then install TMSXE 3.0/3.1 at the end?

  As all this is running on the virtual machine I'll instant just in case.  Advice on the issues listed above, or general advice about these upgrades would be appreciated

  Hi Nick, IMHO, I suggest you first migrate your 2.3 TCX to TMSXE 3.0.2 by this TMSXE 3.0 installation guide, and then pass the TMS and PE later.

  Yes, VM snapshot backup option before any upgrade is fine.

  BR, Mahesh Adithiyha

• Rights of access to the BI Publisher 10g and 11g migrate reports

  Hi all

  I've migrated BI Publisher reports in 10G in the middle of 11 G environment. I installed both applications in local machine, to carry out this activity. Post, I moved a folder containing few reports (.xdo and .xdm) in OBIEE 11g environment installed in Linux environment.

  Report units are visible, but .xdo cannot be performed. I get the error on execution it below.

  "oracle.xdo.servlet.CreateException: oracle.xdo.servlet.CreateException: oracle.xdo.servlet.CreateException: oracle.xdo.servlet.CreateException: definition of data model not found: / report of Performance of the Bank-like of.xdm". "

  In addition, I don't have the access rights to change the datamodel (xdm) and report (xdo)

  I'm stuck with this problem for a few days and could not get much help from the available discussions.

  Thanks in advance

  Prasanna

  Hello

  I was able to retain the rights administrative everything on the new catalogue by doing the steps below

  1 run a fresh upgrade with destination as a separate folder (D:/dest) and not selecting "{BI_DOMAIN}... repository/bi_publisher /'."

  2 created a new catalog of presentation by specifying the path of the catalog in em ' in a new folder.

  3. copy the units OBI EE (file and files problemcs), upgraded in the shared folder in the folder newly created by Ms.

  4. go in BI Publisher 11 g-> Administration. Navigate to the directory of BI Publisher and point to the destination folder would be: / dest' and run 'Upload to the BI presentation catalog.

  5. now, all units are available in a shared folder with full rights for the user "weblogic.

  Concerning

  Prasanna

• With regard to 10g to 11g migration.

  Hi Experts,
  
  can someone pls guide me the items or documents concerning Obiee 10 g to 11g.
  It will be a very useful aid.
  
  
  Kind regards
  Bilel

  Hi Ben,

  Please gothrough the under articles which will contribute to the migration of 10 to 11G.

  http://www.adivaconsulting.com/Adiva-blog/item/18-obiee11g-upgrade.html
  http://www.rittmanmead.com/2010/08/Oracle-BI-EE-11g-upgrading-from-BI-EE-10G-repository-Web-catalog/

  Thank you
  Yogi

• 10g to 11g migration impact

  Hi people,
  
  I need some clarification about the migration of things.
  In fact, we expect migrate Oracle 10 g and 11g.
  I want an idea y at - it no impact in the pool of connections from Weblogic migrate Oracle 10 g 11 g and y at - it no Pro * impact of compilation as well c.
  Please help me...
  Thanks in advance!
  
  Renon-

  You can also watch the MOS score below:

  Nsqlprep FAQ comments Migration / Upgrade [ID 377161.1]

  Concerning
  Rajesh

• Question about vMotion unable to migrate due to the incompatibility of SSE4.1

  Hi all

  We bought another HP BL480c G1 and he joined our cluster, running ESX Server 3.5 U3. First of all and then I realized that our supplier has sent a version with a Xeon E5440. Other guests also BL480c G1, uses slightly older Xeon E5345, which is apparently a difference family produced minor.

  This genereates following error message when you try to vMotion:

  "Impossible to migrate from esx1 to esx4. Host CPU is incomatible to the requirements of the virtual machine to CPUID level 0 x 1 'ecx' register .... Inconsistency detected for these characteristics: * SSE4.1. see the article 1993 for a possible solution.

  I tested a substitution of mask of vMotion (according to KB1993) on a test server and vMotion then works as expected. The substitution of masks is of course supported nor recommended because it can cause instability with vMotion.

  Someone at - he found a solution support around this issue? Or has anyone ever encountered problems with the substitution?

  I found nothing in the BIOS to disable SSE4.1.

  Please post your solutions, workarounds and experiences.

  Thank you

  Björn Johansson

  Hi Bjorn,

  It's good to know that the E5345 comes with FlexMigration, Intel you need to update their documentation.

  If I understand correctly FlexMotion is supported by VMware for 3.5 Update 2:

  _______________________________________

  Best compatibility - VMotion Simplifies VMotion compatibility through the generations of CPU issues. Improved compatibility VMotion (CVS) automatically configure the processors in the server with Intel FlexMigration or AMD - V extended Migration technologies to be compatible with the old servers. After that EVC is enabled for a cluster in the VirtualCenter inventory, all the hosts in this cluster are configured to ensure compatibility of the CPU for VMotion. VirtualCenter does not allow the addition of hosts that cannot be automatically configured to be compatible with those already in the EVC cluster.

  REF: http://www.vmware.com/support/vi3/doc/vi3_esx35u2_vc25u2_rel_notes.html#whatsnew

  _____________________________________________________

  recommended is another story, I think VMware are constantly updating their software to include a wider range of supported hardware, but in an ideal world, we should try and keep the material the same to ensure 100% compatibility.

  Ciaran

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!

• Questions about 10g Grid Control (where/how)?

  Should install US 10g Grid Control on a separate machine, then our production database server or is it play nice on the same machine? The production server is a decent UNIX machine currently used 12 instances; We have capacity/room for EM if it will work well here. If this is the best on a separate machine, will be Windows 2003 (2 CPU 2 G of RAM) enough?
  
  The current databases are all 10.2.0.4 and configuration with Enterprise Manager on an individual basis. Should I remove or stop these agents EM if I go to the Grid Control?
  
  Thank you.

  You can certainly seven. database repository of WHO and in large installations, it is highly recommended. If you are going to hang Grid control for monitoring and alert you want as stable as possible to ensure the capture and alert as expected and breakdowns in the grid control functions affect not your ability to be alerted when monitored environment has a problem.

  It is not necessary that the repository of control grid and WHO will be on the same platform there fore mix windows and unix to the SGC and the repository is fine, but ensure that the environment will be as stable as you need it to be to achieve the objectives of grid control.

• question about 10g As Apache rewriting.

  Hi members,
  I am facing a simple problem. I need to rewrite the url of the server request to the url of the application
  
  
  It is Version 1.3 Apache as web server to the application oracle under windows server.
  
  http://hostname
  TO
  http://hostname pls/abc/f? p = 107
  
  I added these lines at the end of the httpd.conf file and stopped and started apache. It did not work.
  
  RewriteEngine on
  RewriteRule ^ http://hostname/$ http://http://hostname/pls/abc/f?p=107
  
  The load module
  LoadModule rewrite_module modules/ApacheModuleRewrite.dll
  
  no comment and I even added
  LoadModule rewrite_module modules/mod_rewrite.so to it.
  
  
  http://hostname always takes you to the homepage server application. I need to redirect as above. Help, please! Is any other thing necessary?

  In the index.html file, you can try this one.

  Greetings

• Migration of schema of 10g and 11g

  Hello
  
  I spend about 2 GB in size of schema 10.2.0.4.0 11.2.0.2.0 helps users including expdb/impdp & his password and DBA_DIRECTORIES.
  OPERATING SYSTEM: AIX
  
  My questions are,
  
  1 > I know the OBJECT_TYPE below which we can not able to migrate using expdb/impdp?
  
  
  OBJECT_TYPE
  ------------
  INDEX
  PROCEDURE
  TYPE
  TABLE
  VIEW
  FUNCTION
  TRIGGER
  PACKAGE BODY
  SEQUENCE
  PACKAGE
  LOB
  
  2 > how to synchronize the password n/b 10g and 11g for 11g password is case - sensitive.
  
  THX,
  Gowin

  Check this link http://laurentschneider.com/wordpress/2008/03/alter-user-identified-by-values-in-11g.html

• Migration 10g and 11g - Variables does not later

  If someone could give me some suggestions that would be great.
  
  My client has just migrated from 10g to 11g and aside from a few problems with the modules of knowledge Hyperion, which we managed to solve, we met one of the main problems we have not yet resolved, and we are not able to find something about this on the forums / Articles.
  
  The problem is that the variables used in the script do not hold their values after the migration.
  This is for variables position and refreshment. If you refresh, the scenario looks to be pleasantly refreshing value, but this value is not used in interfaces that need to use it.
  
  Where (re) generate the scenario, the problem has disappeared, but since we have different versions of scenario in Dev and Prod, just team all scenarios is not the preferred solution.
  
  Could there be some missing link (s) between the tables in the repo work, which contains the metadata for the scenario and the variable metadata?
  
  All suggestions are welcome!
  
  See you soon,.
  RO

  Hi Rudyo,

  It seems that an update of the repository is necessary. The setting of variables seems to be wrong. Referential ODI11g in the table snp_scen_step a column is added: var_long_value.

  It seems that during the migration, the original field (var_value) is not moved to the new var_long_value field.

  Copy the contents of the old column to the new column will solve the problem.

  Update snp_scen_step set var_long_value = var_value where var_long_value is null.
  commit;

  Kind regards
  Martijn

• a few questions about the migration of content/web content

  Hi all
  
  
  I have a few questions about the migration of the website and content (from development to test) which are not specified after reading the oracle documentation.
  
  -> When we make the site replication will be migrated content (data files).
  
  -> when we move will contained all the ED and RD etc (any object type web site migrated).
  
  --> are the two the necessary step for migration when we migrate web site.
  
  
  Thank you
  
  -Yves

  --> When we make the site replication of the content will be migrated (data files).

  It depends on how you do it. The tool 'Site Studio Replicator' won't move any content, only the structure of the site. The 'Manage replication Site' page can be used to migrate content with the structure of the site but I do not recommend for large sites, I use separate tasks to archive to move the content. "Backup and restore" page stores the entire site in a ZIP file, not advisable for large sites.

  --> When migrate us content will be all ED and RD etc (any object type web site migrated).

  Yes. It uses the metadata xWebsites field to identify the elements that belong to the site.

  --> are the two the necessary step for migration when we migrate web site.

  Depends on how you do it, but yes, all bits are needed.

• 10g 11g migration - process ESB

  Hi all
  
  
  Is it possible to migrate 10 g to 11g ESB process?
  
  
  
  
  Thank you
  Idrissa.

  Yes. JDEV done automatically.

  See this link for more details
  Re: Migration to Soa Suite 10g and 11g!

  Thank you
  Ludovic.

  Published by: vamseeg on August 4, 2009 10:54

• Questions about migration on server 1 for win 7 PC temporarily

  Hello, I am charged with moving that customers 2 of our current of 2 to VMware host separate Windows 7 64-bit PCs TEMPORARILY so that I can install for free ESXi 5.1 as the new host (replacing the current host, which is a Standard operating system Windows Server 2003 on a server Dell Poweredge 2950 using VMware Server 1.0.10).  After the ESXi installation on the server, I intend to spend both clients as they exist now to the new ESXi host.

  I have a few questions about this project, and I hope I can pull your knowledge to help me.  My question is:

  (1) is this a feasible plan?

  (2) what methods would you recommend using?

  (3) should what tools I use?

  (4) can what version of VMware (free) I use on the 2 Windows 7 workstations to serve temporary guest?  A customer is our Standard Windows 2003 domain controller, and the 2nd is an email server and Linux-based web.  I intended to put each on a separate office.

  Any help you offer is greatly appreciated!

  Thank you

  D. Pichard

  You can use vmware player as a free virtual machine player.

  Use vmware converter to convert your servers.

  Is not recommneded for convert DCs however, what you might do, it is to build a new one. However, it is possible.

  the dell 2950: your host in the HCL as compatible uses 5.x