Question CS5.5 install there Windows 10
Hello
I recently updated my computer to a spectrum of HP x 360, which is running windows 10.
Yesterday, I spoke to someone on the 'chat' and asked if my CS5.5 Adobe Creative Suite Design Premium to settle on a device windows 10 and they said YES.
Today I went to install, and I am getting an error for Illustrator. He said that the minimum requirements is not met.
Only, I bought the suite in 2012 and I'm happy with the way it works on my old laptop and do not want to spend more money on the upgrade to the creative cloud when this version works perfectly well.
Can someone please help me solve this problem?
Thank you
Megan
CS5 Master Collection with Windows 10 compatibility
Tags: Adobe
Similar Questions
-
CS5 will install in windows 8?
Yes, it will install if you are using compatibility mode (with xp sp 3 or vista).
-
Question? CS4 installed on your new PC (windows 10). Flash was not installed. Try to install CS5 update... close error: bridge.exe
Have you tried closing the bridge via the Task Manager?
Error: "Setup cannot continue until...". Adobe Bridge is closed. Adobe Creative Suite 5
-
Question seeks to clean install 10 Windows on the drive of the merger. El Capitan.
Problem: try a clean install of Windows 10 via the Boot Camp Assistant on an iMac 27 inches (Late2013) with 10.11.4 installs hours (more than 8 hours) and then failed to install Boot Camp updates. Essentially installation take much long than normal and cannot install updates of the Apple software or create normally start Windows Boot Camp 10.
Background: After problems of slowing down after upgrading to 10.11.4 (with improved Bootcamp Windows 10) who had previously worked fine for 10 months, to the point of a start of OS X time, I decided to do a clean install of my iMac with Fusion 3 to disk.
As I was unable to remove the partition from Boot Camp through BCA because of his holding always at the same load, I used Internet recovery and reset the Fusion drive. This then required me to repair the partition of Fusion by car through THE "fix" option which seems to work very well. And reinstalled OS X 10.11.4 which works fine now (delays etc..)
Try using BCA to create a new partition Boot Camp and a clean Windows 10 install after downloading an image of disk W10 directly from Microsoft (Win10_1511_1_English_x64), BCA by downloading software updates and by selecting the desired partition, it began to restart and initialize the installation. However the whole process has been very slow, each step takes much longer than usual, to progress. Leave for hours rest a blank screen or with a circle of rotation.
I tried with another stick USB 3 and also a USB 2 stick, but none has made a difference.
In the last attempt, I left running overnight and after 8-9 hours, he finally reaches the top of desktop Windows 10 and the update of Apple Bootcamp starts to load updates. However, he just hung and even after 2 hours, nothing was. Reboot and try once again has been the same.
After that I tried to create a Windows Installer via BCA 8.0 however it gives just a TPG error when you try to select the drive (due to el Capitan I guess?)
After four days of efforts, I'm a loser on how to get the Windows 10 on the Boot Camp partition. I can't even install W8 and upgrade due to the error of TPG.
Any help or suggestions how to proceed with the diagnostic / resolution of the problem would be appreciated.
Details:
System: iMac (27 inch, end of 2013), 3.4 GHz Intel Core i5, 16 GB 1600 MHz DDR3, NVIDIA GeForce GTX 780 M 4096 MB, OS X 10.11.4
- Nothing other than the keyboard and mouse attached via the USB ports, as well as the key USB of BCA. No other attached devices.
- Reset memory NVRAM, SMC and ran more than once disk utility. No problem not reported. Ran NVRAM reset before each attempt.
- At ran EtreCheck report which seemed OK.
- Verification of diagnosis ran who is childless.
A detail I noticed after the merger by car there are now two Macintosh HD images when you use boot option. One previously. Are named "Macintosh HD" and "Macintosh HD2". I remember being Yosemite simultaneously in three, but which has been fixed in an update.
In addition, it seems that no recovery partition. Cmd + R lance Internet recovery.
Distill the results (the Boot Camp partition removed):
/ dev/disk0 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * GB 121,3 disk0
1: disk0s1 EFI EFI 209.7 MB
2: Apple_CoreStorage GB internal drive 121.0 disk0s2
3: disk0s3 Apple_Boot Boot OS X 134,2 MB
/ dev/disk2 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * 3.0 to disk2
1: disk2s1 NO NAME 209.7 MB EFI
2: disk2s2 Apple_CoreStorage TB 3.0 drive internal
3: disk2s4 Apple_Boot Boot OS X 134,2 MB
/ dev/disk3 (internal, virtual):
#: NAME SIZE TYPE IDENTIFIER
0: Apple_HFS Macintosh HD + 3.1 TB disk3
Logical volume on disk0s2, disk2s2
7BE1F343-ACBE-4144-BF86-C838BE1E49D4
Fusion unencrypted drive
iMac - simon: ~ list of cs simon$ diskutil
CoreStorage groups of logical volumes (1 found)
|
+ Logical Volume - Group CA0B8D0A-6315-4E85-B313-52AB509473F2
=========================================================
Name: Internal drive
Status: online
Dimensions: 3121237860352 B (3.1 TB)
Free space: 0 (0 B) B
|
+-Physical volume 5E75EE74-EE1F-4FCB-A0C5-9ED5517FEB93
| ----------------------------------------------------
| Index: 0
| Disc: disk0s2
| Status: online
| Dimensions: 120988852224 B (121.0 GB)
|
+-Physical volume 91D639D6-634E-47C1-AFE5-616CE12E71E0
| ----------------------------------------------------
| Index: 1
| Disc: disk2s2
| Status: online
| Dimensions: 3000249008128 B (3.0 to)
|
+--> Logical volume family EE9934AC-F3CB-4101-ADB6-576F4371B4B9
----------------------------------------------------------
Encryption type: no
|
+--> Logical volume 7BE1F343-ACBE-4144-BF86-C838BE1E49D4
---------------------------------------------------
Disc: disk3
Status: online
Size (Total): 3106705375232 B (3.1 TB)
Reversible: no
Name: Macintosh HD
Volume name: Macintosh HD
Content indicator: Apple_HFS
LVG Type: Fusion, sparse
Summary:
Q1: Should it take 4 + hours to install Windows 10 via BCA?
Q2: Al must ultimately be so slow when initially W10 desktop?
Q3; What I do once I arrive at the office of W10 but it automatically updates the graphics driver as BC update is simply suspended for centuries and get a working driver to restart at least W10?
Q4: is there a problem with the disk HARD the Drive of Fusion that is causing all this delay and slow install / boot? ON the clean install OS X 10.11.4 it is back to be fast as usual and all tests show things are OK but W10 goes on the part of the HARD drive. No way to verify this beyond diagnosis or Etrecheck?
Q5: Y at - it no problem with the GPT / MBR that may be causing the delay etc. ?
Q6: How can I use my existing WindowsImageBackup backup from the previous W10 with the BCA install usb drive or how to create a USB stick otherwise recovery disk with my other single Mac have W7?
Q7: How can I install W8 as I once did on Yosemite, via el Capitan without a mistake to TPG on selection of disc?
Details:
Day 5. Attempt at 6.
Partition Boot Camp delete and try again install via BCA. First question, is that when the startup it goes to a blank black screen. For a time nothing left. Reset then using alt to select windows training results in almost instantaneous startup of the BCA message created and the beginning of the installation.
4 1/2 hours from start of Windows 10 initial signature window.
Then the second question. One to reach the Boot Camp update Office tries to start and install the drivers. Allows you to "list files...". "stage then sits at the bar about 5% green for 1 to 2 hours and does nothing. All actions in the Office of the W10 takes ages.
In the meantime, auto update of the W10 appears a message saying that the updated graphics drivers as one of the few messages or actions during this period. Looks like Nvidia install with the entire package of experience (unwanted) etc. and very probably not the correct gpu driver.
Finally deciding to cancel the installation of BC by killing the Setup.exe process. Then copy Boot camp install files on the desktop. Lasts 30 minutes to copy. Run again and this time, although taking 15-20 minutes to download and install later with the success message.
Check the graphic driver it shows a yellow exclamation mark, so the following Microsoft instructions I use the uninstall option via the device and then Manager (slowly) come on board to load and download the latest Nvidia driver on their site for the GTX 780 M for 64-bit W10 etc. The same thing that I had used previously. Slow with running the Nvidia Setup program again, but eventually it works only to say that he could not install as unrecognized graphics device...
He ends up with Microsoft PnP driver so it's at least sufficient start and run it again BC of the figure updates as all other drivers have been installed. To restart, but I get an error of K-Mode that is most likely related to this driver graphic and not possible to start in the new W10 Boot Camp partition after 7 hours.
I have a picture of W10 backup recovery (WindowsImageBackup) I've had in a few weeks, but it will not install bet for the installed W10. I try with the ACO created the USB windows but can't seem to get a way to get into recovery mode and to get the menu to install it. I don't have a way to create a USB W10 recovery key now because my other Mac has just installed W7.
Finally I tried to count a reset of the Recovery boot up option but it seems that it will take longer to start.
I also went to the recovery and selected Boot Mode safe, but it opens on an empty black window and he's here doing nothing.
Looks like I'll have to restart on via BCA and reinstall and try and solve the problem of graphics in order to install driver updates from BC and restart to W10 and hope that with the drivers, it returns to the operation and the normal starting time. Then update the gpu driver.
I used and installed Boot Camp several times with over the years including previously an upgrade of W8.1 > W10 I used for over 6 months without problem. I've never known these installation very long or ice once in Windows even for the initial start upward.
For any help or suggestion would be appreciated, and this seemingly simple process has now expanded to five days.
-
original title: Windows password
After you install an update from Windows, my PC isasking for password. I have never entered a password before and don't remember having created a. A tech support person suggested that perhaps a virus. How will I know who he is and how to solve? Thank you.
Hello
Please only post the same question once in these forums
___________________________________________________________
and if Malware is not the problem, it's the only advice that microsoft can provide you about passwords
It is available on you microsoft information help on problems with passwords
http://support.Microsoft.com/kb/940765
If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.
You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:
- Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
- Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
- Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
- Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.
____________________________________________________________________
except that we cannot help you
read this microsoft's policy NOT to provide assistance to crack passwords when they are lost or forgotten:
-
I was installing my windows live on my iphone and when I myself am logged in on my pc all my mail disappeared. is there a way to retrieve my Inbox?
http://www.windowslivehelp.com/
Welcome to Windows Live Solution Center
Repost nicely in the Forums above for Windows Live.
See you soon.
Mick Murphy - Microsoft partner
-
* Original title: hard drive
I have a lenovo laptop, processor Intel i3, 500 GB hard drive. After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive. I ran chkdsk looking for bad sector and its display 6000 KB in bad sectors. After completing the audit when it began to restart its stuck when the windows logo appears. What should I do? Reinstall the windows help?
Run the hard drive HD diagnosis extended CD scan manufacturer to know with certainty the State of the reader. If your brand has no bootable diagnostics in the link, use Seagate Seatools burned onto CD or SeaTools for a USB key . Follow this with a full check disk command from the installation media kicked prompt know with absolute certainty the State of the reader. If he repeated the errors after you run the two tests twice, I replace it or at least keep everything backed up in real time.
If by chance the drive past diagnosis then compares the steps you've done with the best possible Clean install Windows 10 in the link, you can do more if it varied too - especially if the partitions were not deleted during install. If you do then I additonally run own Diskpart command command line of the punt media accessible to the first screen after startup by pressing SHIFT + F10 keys, or through the repair your computer on the second screen.
-
My CS3 does not correctly install on Windows 10. Is there a solution?
My CS3 does not correctly install on Windows 10. Is there a solution?
Cloud & Win10 https://helpx.adobe.com/creative-cloud/kb/Windows_10_compatibility_FAQ.html
-In addition, only CURRENT products will be tested and updated for compatibility with Windows 10
- so if you have an older program, update you to Windows 10 at YOUR risk of problems
First of all, that the software is old enough so that it does not at all with Windows 10... but
An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others
-
I have LR 6 (upgrade LR 5and4) installed on Windows PC and switch to Mac. It will not install on Mac since the earlier version is installed. Is there a solution?
Update should allow you to enter the serial number of the previous version during the installation
If this does not work, you must communicate directly with Adobe
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">
Don't forget to stay signed with your Adobe ID before accessing the link below
Creative cloud support (all creative cloud customer service problems)
-
Can I install CS5 Production Premium in Windows 10
I have a desktop with Windows 7 and I was able to install CS5 Production Premium. I finally updated to Windows 8 and 8.1. I've also updated for Windows 10 as soon as it became widely available. The suite CS5 has worked very well under all OS (including Windows 10). I had problems with Windows OS 10 which were too difficult to analyze and was responsible for making a "Reset this PC" to do a clean install near Windows 10. This forces me to install all my old applications. I started first with CS5. Most of the applications installed, but I had a number of errors [-0 fatal Error (s), 92 (s), 125 warning (s)].
ERROR: Check the payload integerity: failed with code 1
ERROR: MsiConfigureProductEx failed with the error: 1612
ERROR: The following payload errors were found during the installation:
ERROR: -Microsoft_VC90_ATL_x86: installation failed
ERROR: -Adobe Media Player: installation failed
ERROR: -SiteCatalyst NetAverages: installation failed
ERROR: -Adobe CS5 language x 64: installation failed
ERROR: -Microsoft_VC90_CRT_x86: installation failed
ERROR: -Support for adobe Photoshop CS5: installation failed
ERROR: -Adobe Bridge CS5: installation failed
ERROR: -Adobe Encore CS5 Royalty third party content: installation failed
ERROR: -Microsoft_VC80_ATL_x86: installation failed
ERROR: -Installation of fonts common x 64 recommended: installation failed
ERROR: -AdobePDFL x 64 CS5: installation failed
ERROR: -Adobe Encore CS5 Royalty Codecs Installer Wrapper: installation failed
ERROR: -Microsoft_VC80_MFCLOC_x86_x64: installation failed
ERROR: -Adobe after effects CS5 third RoyaltyContent Wrapper: installation failed
ERROR: -Adobe Premiere Pro CS5 third content Wrapper: installation failed
ERROR: -Adobe Premiere Pro CS5_AdobePremierePro5en_USLanguagePack: installation failed
ERROR: -Photoshop Camera Raw: installation failed
ERROR: -AdobeColorCommonSetCMYK: installation failed
ERROR: -AdobeHelp: installation failed
ERROR: -Camera profiles Installer: installation failed
ERROR: -Adobe after effects CS5 third Wrapper content: installation failed
ERROR: -Adobe Mini Bridge CS5: installation failed
ERROR: -Microsoft_VC80_CRT_x86_x64: installation failed
ERROR: -Pack_x64_AdobePhotoshop12-en_US_x64 English-language adobe Photoshop CS5: installation failed
ERROR: -Creative Suite 5 Production Premium: installation failed
ERROR: -AdobeColorJA CS5: installation failed
ERROR: -Adobe CS5 Committee: installation failed
ERROR: -Adobe Premiere Pro CS5 Royalty third party content: installation failed
ERROR: -Adobe Media Encoder CS5 Dolby X 64: installation failed
ERROR: -Adobe BrowserLab CS Live: installation failed
ERROR: -Photoshop Camera Raw (64-bit): installation failed
ERROR: -Microsoft_VC90_MFC_x86: installation failed
ERROR: -Support for adobe after effects CS5: installation failed
ERROR: -CSXS Extension history: installation failed
ERROR: -Adobe Photoshop CS5 Core_x64: due to a lack of Language Pack installation
ERROR: -Adobe after effects CS5_AdobeAfterEffects10en_USLanguagePack: installation failed
ERROR: -Suite Shared Configuration CS5: installation failed
ERROR: -First Pro CS5 adobe third-party Royalty content Wrapper: installation failed
ERROR: -PDF settings CS5: installation failed
ERROR: -AdobeColorEU CS5: installation failed
ERROR: -AdobeTypeSupport CS5: installation failed
ERROR: -AdobeColorVideoProfilesCS CS5: installation failed
ERROR: -Adobe OnLocation CS5 Royalty content: installation failed
ERROR: -AdobeColorCommonSetRGB: installation failed
ERROR: -Adobe Player for Embedding x 64: installation failed
ERROR: -Common x 64 required font installation: installation failed
ERROR: -Microsoft_VC90_ATL_x86_x64: installation failed
ERROR: -Adobe CS5 Extensions CSXS: installation failed
ERROR: -Microsoft_VC80_ATL_x86_x64: installation failed
ERROR: -AdobeOutputModule: installation failed
ERROR: -Microsoft_VC90_CRT_x86_x64: installation failed
ERROR: -Adobe Media Encoder CS5 PCI: installation failed
ERROR: -Microsoft_VC80_CRT_x86: installation failed
ERROR: -AdobeCMaps x 64 CS5: installation failed
ERROR: -AdobeTypeSupport x 64 CS5: installation failed
ERROR: -Adobe Encore CS5: due to a lack of Language Pack installation
ERROR: -Microsoft_VC90_MFC_x86_x64: installation failed
ERROR: -AdobeColorVideoProfilesAE CS5: installation failed
ERROR: -DynamiclinkSupport: installation failed
ERROR: -Adobe WinSoft Linguistics Plugin CS5 x 64: installation failed
ERROR: -Adobe Encore CS5_AdobeEncore5en_USLanguagePack: installation failed
ERROR: -Adobe Premiere Pro CS5 third party content: installation failed
ERROR: -AdobePDFL CS5: installation failed
ERROR: -AdobeCMaps CS5: installation failed
ERROR: -Adobe after effects CS5 third party content: installation failed
ERROR: -Adobe Premiere Pro CS5: due to a lack of Language Pack installation
ERROR: -Microsoft_VC80_MFC_x86_x64: installation failed
ERROR: -ph: installation failed
ERROR: -Installation of common fonts required: installation failed
ERROR: -Presets for adobe after effects CS5: installation failed
ERROR: -Adobe after effects CS5 Royalty third party content: installation failed
ERROR: -AmericanEnglishSpeechAnalysisModels: installation failed
ERROR: -Adobe standard 2.0: installation failed
ERROR: -Microsoft_VC80_MFC_x86: installation failed
ERROR: -AdobeColorNA CS5: installation failed
ERROR: -AdobeColorPhotoshop CS5: installation failed
ERROR: -Adobe Media Encoder CS5 Dolby: installation failed
ERROR: -Pixel Bender Toolkit: installation failed
ERROR: -Microsoft_VC80_MFCLOC_x86: installation failed
ERROR: -Adobe After Effects CS5: due to a lack of Language Pack installation
ERROR: -Adobe Soundbooth CS5 Codecs: installation failed
ERROR: -Installation of recommended common fonts: installation failed
ERROR: -CS5 adobe Extension Manager: installation failed
ERROR: -AdobeJRE: installation failed
ERROR: -Adobe Soundbooth CS5 Royalty Codecs: installation failed
ERROR: -AdobeMotionPicture CS5: installation failed
ERROR: -Adobe AIR: installation failed
ERROR: -First Pro CS5 adobe support: installation failed
ERROR: -Adobe Media Encoder CS5 PCI X 64: installation failed
Please help and advise
If the Microsoft process that I linked to does not work, then I don't know any way to get older programs to work with Win10
Given that CS5 is no longer supported or updated by Adobe, I know no other support solutions
-
Dreamweaver CS6 can be installed on Windows XP computer with Indesign CS5.5
I already have a copy of InDesign CS5.5, installed on a PC with Windows XP Pro (SP3).
Can I install the latest version of Dreamweaver CS6 on this machine and keep the use of the existing Indesign version?
Yes.
-
Oracle 11g (11.2.0.1.0) client installed on Windows server standard edition 2012 - question
Hello
When I tried to install oracle client (Oracle 11 g (11.2.0.1.0)) client installed on Windows server 2012 standard edition got following error.
"ins-13001 environment does not meet the minimum requirements. 64 bit Windows 2012"
So, I have two concerns.
1. any solution to solve this problem?
2. If I install 12 c Client, will I connect Oracle database 11 g (11.2.0.4.0) using 12 c customer?
Please support.
With our thanks
Ngoyi.
Certainly can (and probably should) use 12 c client. Oracle certifies customers until two major releases far they connect to databases. Are all of my db 11.2.0.4, but I've been installing only customers of 12 c for a couple of years now.
See MOS Note 207303.1.
-
Impossible to install 10 Windows on Bootcamp partition
Hello! I just tried to install Windows 10 on my Macbook with a 32 GB USB using Bootcamp. Everything was fine until I came to the part where I have to choose the partition where I want to install my Windows 10 and of course I chose the Bootcamp partition, but in fact I couldn't click on 'next' (I was so stupid and don't format it).
So I just format the Bootcamp partition and when I tried to click 'next' he just told me 'we could not create a new partition or locate an existing one. I went through google and searched all regarding this problem and there are a lot of guys having almost the same or exactly the same 'error' when trying to install 10 Windows on the Bootcamp partition, but nothing has really helped me. I deleted everything except my USB key and someone told me that I should only have 4 partitions or less.
He shows me the 4 partition but there are two partitions (3) and two partition (1).
Is this a problem?
Here is a picture of my diskutil list: https://i.gyazo.com/f554fb8aac609c2420f55f9696fa06a6.pnggiven that English is not my native language, I'm sorry for my bad spelling.
I hope someone can help me install Windows 10 with Bootcamp! Thank you very much!
You have a Fusion drive, which is usually not sold on a MacbookPro? You can check model/year your Mac? Please, do not post the serial number of your Mac.
If you replaced the optical drive to create your own Fusion player, you can run the questions, depending on the year/model of your Mac.
-
Install the Windows own 8.1 to want Phoenix 810-230qe?
I just bought a HP Envy Phoenix 810-230qe with Windows 8.1 Pro 64-bit. It's my first HP system and so far I was impressed by the HP control process, fast delivery and the computer itself from what I can tell so far. However, I have a question. How must we do to do a clean install of Windows 8.1, without all the additional software that comes standard with the system?
With my previous Dell systems, I have always asked for a Windows DVD and I downloaded the necessary additional drivers from Dell. I bought a set of HP System Recovery install discs are expected to be able to do a cleanup, but unless I'm missing something, I don't see any options for loading just the Windows operating system and the related system drivers. I see there are a few available through HP suspport drivers, but not all that are necessary and I see still no way to do just installing the OS.
How is that possible? Thank you...
Hello
You have the Win 8.1 drivers on your PC now located in the folder in C:\SWSETUP.
Copy this folder to an external drive for use later when necessary.
I don't know if you can download the 8.1 Win. ISO from Microsoft with an OEM product key. You couldn't do that when downloading win 8. You need a detail or, I think, a upgrade product key.
If you have a retail key to win 8 you can Win 8.1 free download here.
I would like to delete the stuff you want via programs and features and then create acustom Refresh Image. Then, if you need to recover, use the IRC with no expansion of the seller. Create an image of Microsoft System or use third-party imaging software.
Jaco
I'm not an employee of ch *.
"" "" Please give a "Bravo, Thumbs Up" If the notice is relevant or "accept as Solution" to help other users of the forum having a similar problem.
HP products:
Retrograde 810-150se (Win 8.1) office in Win 7
17 t - j000 Notebook (Win 8 upgraded to Win 8.1)
H8 1380t CTO Office (Win 7)
560z Desktop (Win 7)
Other PC:
Laptop Dell Inspiron (Win XP upgraded to Windows 7) -
What drivers to download for a clean install of Windows 7?
I'm working on a clean install of Windows 7 Enterprise SP1 on my HP Pavilion computer of bureau a6600f (originally there was Vista, now he has Windows 7 Ultimate). The machine is stable but really slow.
If I want to download the drivers and others, which is here. But I don't really know what are those who... just do each of them?
and then after installing Windows 7, I have just install these one by one?
Here are the specifications of your desktop HP Pavilion a6600f. Based on the specifications, this model uses a nVidia Chipset nVidia Graphics, nVidia Network and Realtek HD Audio. If you have already done, I would update the BIOS first. I skip the installation of the HP drivers and go directly to the sites of the manufacturer for the latest drivers chipset.
nForce Driver v15.56 for Windows 7 64-bit (Ethernet, SATA/IDE, SMBUS, pilot EMS and Away Mode driver)
V307.83 GeForce Driver for Windows 7 64 bit (Graph)
Realtek HD Audio Driver for Windows (Tick 'Accept', click 'Next', years download location for 3rd item to the bottom of the list)
I think that your 'slowness' is due to the entry level Pentium E2200 CPU and only 3 GB of RAM. Consider one of the better microprocessors on the list and the upgrade to 4 GB RAM HP.
If you have any other questions, feel free to ask.
Please click the White Star of KUDOS to show your appreciation
Maybe you are looking for
-
I cannot change my desktop shortcuts icons after installing firefox on my windows machine 7.
All the shortcuts in office under properties don't show anything to be able to change the icon.General security details previous version are the only available tabs
-
Since Firefox updated to 23, Hotmail does not display correctly
Firefox itself up-to-date version 23 and since Hotmail does not appear correctly. I tried in IE and Chrome, and that's fine. I tried troubleshooting suggested, but nothing has worked.
-
My Bookmark drop down hangs after opening Web site. Often have to double-click site to turn it off.
My Bookmark drop often hangs and makes it necessary to double-click a site open to erase it.
-
I added a user with administrator privileges and now the original log admin on request a password. I did a. Y at - it a default password?
-
not enough disk space on recovery drive d message
I can't understand why my computer gives me a message of LOW DISK SPACE ON RECOVERY DRIVE D... How to clean it?