Question [edited by the host for clarity] TIFF files to pdf

Similar Questions

• How to configure the CD driver on the host for a virtual machine?

  After you create a virture machine and put the CD of driver on host, when powered on the vertual machine, may not start the drive form the CD only from NIC.

  How to configure the CD driver on the host for a virtual machine?

  Right-click on the virtual computer and go to edit settings. Click the Options tab and under the tip list, there should be Boot Options. Enter an amount of milliseconds to wait before your boot, so you can activate the CD-ROM. You can also activate the CD even if it boots to the NETWORK card option, and then reset the virtual machine. Get the focus of this virtual machine on the console session, and then press ctrl-alt-insert. Your CD-ROM will stay connected if you do not want to delay the startup process.

• An error occurred updating the provisions of the article. The InDesign for page layout file can not be...

  When you try to complete the tutorial for indesign, I get the following error when you try to add an article to my folio:

  "An error occurred while updating the provisions of the article. The InDesign for page layout file is not found. »

  I am able to create the folio then I click into articles. My 'WiFi_v.indd' document is opened by clicking Add article, but I get this error message.

  I use the following versions of the software (should be later).

  -Folio Builder (downloaded version Version 1.1.8.0)

  reported version:

  11.4.3.20111129_m672305 7.5.5.17

  Adobe Design 7.5.2 CS 5.5

  Also tried to reinstall the plugins (uninstall and install)

  Ok.

  Sometimes I have some problems with the mounted network volumes.

  When dismantling and then it works again.

  Try dismantling of unnecessary volume and try again.

  Or try local labour and unmount all volumes of network.

  We hope that you will get to work.

  BR

  Henrik

• Convert Multiple TIFF files to PDF in Adobe Acrobat 9 Pro with batch processing

  Hello. I use Adobe Acrobat 9 Pro and I am trying to convert approximately 3000 TIFF files into PDF files. Is there a way to batch process all the files at once so that it can be done quickly?

  Hi Alisha Garrett,

  Please see the thread with a similar question:

  • Batch convert TIFF to PDF
  • TIFF files secret batch in batch combined in one PDF
  • TIFF files secret batch in batch combined in one PDF

  Check if that helps.

  Would also like to inform you that Adobe Acrobat 9 is an old version and does not support end of support | Reader 9 and Acrobat 9 (and previous versions)

  Kind regards

  Meenakshi

• Change the host for a virtual machine on a cluster and the host is not in accordance with the attached profile

  Hi all

  I have 02 questions.

  1. we have a cluster which has 02 physical hosts (Host1 and Host2). We have 02 virtual machines on the Cluster. Active DRS on the cluster.

  But the problem is that my 02 VMS are always stays on a Host2. A few weeks ago, each virtual machine carried out on each host. How can I place each virtual machine on each host to perform better.

  How to do this?

  2. I connect to the cluster using vSphere client 5.1, under summer host, I get the following message

  "Configuration problems: host is not in accordance with the attached profile.

  I suspect that this is the case for my question 1?

  Thank you very much

  Hello

  I think I found the answer for the problem of home profile. I changed the following values to 1 for each host to > settings > under software > advanced settings >

  Under Data Mover

  HardwareAcceleratedInit

  HardwareAcceleratedMove
  

  
  

  Under VMFS3

  HardwareAcceleratedLocking

  Compliance status is returned to the green.

  Thanks for the advice guys!

  Thank you

• Impossible to select the host for the pool, can only select Cluster

  Hello

  I try to assess the view and go into the Guide of the evaluators.  When I set up the parameters of resource under the vCenter part settings of the linked Clone Pool where I'm supposed to be able to select a host or a Cluster, I have only the option to select my (not an individual host) cluster.  The problem is that not all hosts in my cluster have access to the SAN that I use for this assessment, so I wanted to be able to isolate the pool to a single host.  Is there some kind of trick to get the hosts present themselves individually?  The hosts are 5.5 ESXi and vCenter vCenter 5.5 Standard

  Thank you

  Dylan

  You can only select the cluster. "Host or a cluster" refers to the fact that if you have a stand-alone Host which is not in a cluster, you can use - so you'd have to move the host you want to use on a stand-alone host or in its own cluster.

  Mike

• Copy a file in VMware machine from the host (for the guest OS) operating system

  Hello

  I need to migrate data in

  guest operating system of the host OS via

  VMware.

  The client runs as a virtual machine in VMware

  that is run from the host operating system.

  Anyone know of a way to do it?

  Thank you

  Stuart

  smcracraft wrote:

  I need to migrate data in the operating system of the host operating system through VMware.

  The client runs as a virtual machine in VMware that runs from the host operating system.

  Anyone know of a way to do it?

  First VMware is a company not a product and you didn't say what VMware product you use no you said what OS is on the host or the guest then I suggest you read the VMware product documentation that you are using.  In general, if the Virtual Machine works in the same way a physical Machine so you can do the same between the host and guest in dealing with clients as if it were a physical Machine.

  If you have VMware Tools installed in the comments you can also take advantage of VMware shared folders and or the functionality of Drag and Drop on pris supported operating systems.

  BTW take a look on: HOWTO: ask (and answer) Questions

• With the help of 'Modify the Original' on a tiff file PS creates still another copy in Lightroom - is this normal?

  Hello

  Just tackle LR - round-trip PS and I'm a bit confused so thought I'd check here.

  What we want in LR is more of a raw file simple tiff file edited in PS - and if we open the tiff already edited in PS again, the file is replaced just when PS saves.

  Looking at the descriptions/options when we're going to edit already edited tiff, 'Edit the Original' looks like this will be repeated, but instead, we are left with two TIFF edited in Lightroom - does that mean that every tweak in the PS will result in another file in LR?

  Pointers would be much appreciated.

  See you soon

  Actually, for once that we certainly had edited TIFF two in LR - but after the back and forth a few times, we now see a PS edited tiff in the library - maybe the film took a few minutes to update?

• How to restore the hosts back to normal file

  "I edited my file hosts with the notebook with the extension".txt ". However, I can't edit my file hosts its original file extension name, which has no name. To change my hosts file to open it with Notepad, the name of the file extension ".txt" has disappeared and I can't change my hosts back to normal file.

  This means that my modified hosts file has no effect... How can I fix it?

  Hello!

  To open the hosts file:

  In Notepad - menu file-> Open-> C:\WINDOWS\SYSTEM32\DRIVERS\ETC

  under type of "File Name." * to see all files; Select the host from the list.

  To save a file in Notepad without notebook by adding the extension ".txt" filename you gave, type the name of the surrounded file "" under file-> save as.

  Ex: "hosts".

• Can I use javascript (in a button) to run 'save the attachment' for an attached file?

  (Acrobat DC, Windows 7 system)

  I have a PDF form that includes several attachments. Some of these attachments * may * must be recorded in the local file system of the user.

  What I would do, is add a button that includes javascript that will run the option 'Save the attachment' directly, rather than requiring the user to open the attachments Panel, select the file and select Save attachment.

  Thus, the user process would be:

  1. Click FooButton.
     Extract the file opens the window for the file FooAttachment.blah.
  2. The user accesses the desired backup folder and saves the file.

  Is it possible to do this with acrobat javascript? (I'd be happy with a specific example or a pointer to an explanation of how to access the different features similar :-)

  Pointers would be greatly appreciated.

  Yes, you are using the correct method to save the attached file, so the question is how you join it in the first place?

• Does anyone know what dll is the event for MSCamSvc messages file?

  Hello
  I want to stop the event log harassing me on "the description for event ID 0 in source as mscamsvc is not found." Well, I know this isn't a problem as such but it annoys my OCD. Does anyone know what dll is the event message file, so I can just add in the registry?

  Van
  Baz

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/service-mscamsvc-hung-on-starting/0907dc67-05b3-4195-afd9-ebb1bc3c7952

• Installation of photoshop elements Associates/changed all the files on the computer for photoshop elements files

  I bought Photoshop Elements for my mother while hospitality during Thanksgiving. When I installed it on his computer, it changed all the files on his computer for photoshop elements files, or rather, it combined all the files in photoshop elements. I don't know that it is an operating system problem. Can someone tell me why this is happening and give me a cure? It uses Windows 7. It is a 64-bit computer, if it's important.

  Thanks for any advice.

  Andy

  Hi Andy,.

  Please, try the steps mentioned in the link below and check out them.

  http://helpx.Adobe.com/Acrobat/KB/application-file-icons-change-Acrobat.html

  Kind regards

  Anand

• The need for multiplexing of files when the separation of disks are on SAN

  Oracle 11 g 2
  
  Hi all
  
  I see different opinions/statements concerning the need to multiplex when files (control files, redolog, storage files, etc...) Without (LUN) addressing this issue. Because LUNS are spread you encounter conflicts. If this is true, what is the need to multiplex of files and even separate tablespaces? Why not just have everything on a LUN?
  
  I appreciate all the answers from the experts.
  
  Thanks to you all.

  EdStevens wrote:

  It's the same sysadmin who will someday decide he needs to free up space disc of delting files that are not needed .

  Not when you use ASM. And IMO ASM should the first considerations. Must be reasons for NOT using ASM - rather than the reverse.

  Space SAN without high-end are quite expensive - because it is fairly sophisticated ito redundancy, load balancing, performance and all that.

  So if you want to make redundant on the database side, there is a cost impact you need additional LUNs for this. And this must be justified. I bet most of the time you will be not able to the SAN architecture has all these issues covered. And human error is an operational matter that should be handled through operational procedures and control change management - something else that you can argue that every piece of s/w and h/w and infrastructure must be duplicated and triplicated same like a fool can fubar it. And it is not practical or cost-effective. Get rid of the silly instead.

• First CC still not not using the thm for DSLR timecode files?

  I'm looking to confirm that first Pro CC still does not use sidecar files mov Canon DSLR thm files to extract the time of day timecode when importing. I know PP CS6, it only did not. Just checking to see if it is always the case. All DSLR files import currently with 00:00:00:00 timecode as technically most DSLR cameras are not real timecode in the mov files.

  My solution to workaround for recent years was of qtChange allows to add time camera of day timecode files thm files before importing in first mov. It doesn't seem a big deal, but when sending the changes to a colorist, for example, they LIKE a kind of timecode to help their end. I should add that qtChange can also add a name of coil for mov files, which is an additional subtlety to the calibration software.

  It would be nice to skip this additional step before importing.

  I'm heading over to the wishlist now to request this feature in the future PP updates.

  Thank you!

  Billy

  THM files are not used by first Pro CC. You should always use something like qtChange to add a TC track that is appropriate in the MOV file.

• Cannot find the .udc for Indesing CS4 files

  I tried to change the settings/spelling dictionary, but I can't find the .udc on my system files? It is downloadable from somewhere?

  The settings in the dictionary preferences have nothing to do with the default language. Leave it you choose which provider, if there is more than one, to use for the dictionary.

  To set the default language to use menu language dropdown in the character Panel. Do it with no open docs and it will be the default for all new work. In existing documents change it with nothing chose to make it the new default document and select the text and change onece in addition to affecting the language to what you have already defined.