First CC still not not using the thm for DSLR timecode files?

Similar Questions

• I signed up for 30 day trial and I just got a notification if the trial ended. I did not use the system for more than 30 minutes.

  I signed up for a 30 day trial and I just got a notification if the trial ended. I did not use the system for more than 30 minutes.

  http://helpx.Adobe.com/x-productkb/global/trial-software-expired-early.html

• query not using the index for some user

  Hello
  
  I have a query that is running in less than a second for sys, system, or schema owner. However, another user (test_user) take 30 seconds to run the same query.
  
  I certainly dba and privileges identical to test_user as schmea_user, but the result is the same.
  
  I checked
  
  Select * from V$ SYS_OPTIMIZER_ENV;
  
  Both are the same for both users.
  
  I have check the plan to explain to both users. I noticed that for sys/system/schema_owner, the query uses an index, but not the test_user.
  
  All have experience the issue where a user uses an index, but not the other?
  
  Thank you for any assistance.

  Thank you for the display of formatting output, this output is much easier to read.

  One of the first things you notice about the execution plans that is for the owner non-schema "SQL_ID, 0wcs85uywn72m, number of children 1" appears in the output of DBMS_XPLAN, while "SQL_ID 0wcs85uywn72m, child number 0" (the same SQL_ID but a different number of child) appears for the schema owner. "" Whereas the SQL_ID is the same, which indicates that the client requires exactly the same SQL statement, so it's a good start.

  Then, note that in the predicate for the nonschema owner information section the following appears (sometimes with the order of the two conditions switched in position) as a condition placed on each table that is available in the schema:

  filter(("SEAL_FLAG" IS NULL OR "SEAL_FLAG"'Y'))
  

  The above suggests the presence of the virtual private database (or a superset of private database virtual) generated the predicates. You should be able to confirm that this is the case by querying V$ VPD_POLICY using the SQL_ID which was displayed in the DBMS_XPLAN output:

  SELECT
    *
  FROM
    V$VPD_POLICY
  WHERE
    SQL_ID='0wcs85uywn72m';
  

  As a test, I made a few minor adjustments to the example on this page:
  http://Antognini.ch/2011/09/optimizer_secure_view_merging-and-VPD/
  I changed the name of T to T12 and TESTUSER table specified for the schema names. I then created the function S of this page as follows:

  CREATE OR REPLACE FUNCTION s (schema IN VARCHAR2, tab IN VARCHAR2) RETURN VARCHAR2 AS
  BEGIN
    RETURN 'ID < 10';
  END;
  /
  

  I then added a couple of lines in the T12 test table:

  INSERT INTO T12 VALUES (1,1,NULL);
  INSERT INTO T12 VALUES (4,1,NULL);
  INSERT INTO T12 VALUES (10,1,NULL);
  INSERT INTO T12 VALUES (12,1,NULL);
  
  COMMIT;
  

  With an active 10053 trace, I executed the following SQL statement:

  SELECT id, pad
    FROM t12
    WHERE
    spy(id, pad) = 1
  

  The SQL_ID (in my case, found in the 10053 trace file) was 6hqw5p9d8g8wf, so I checked V$ VPD_POLICY to this SQL_ID:

  SELECT
    *
  FROM
    V$VPD_POLICY
  WHERE
    SQL_ID='6hqw5p9d8g8wf';
  
  ADDRESS          PARADDR            SQL_HASH SQL_ID        CHILD_NUMBER OBJECT_OWNER OBJECT_NAME                    POLICY_GROUP                   POLICY                 POLICY_FUNCTION_OWNER          PREDICATE
  ---------------- ---------------- ---------- ------------- ------------ ------------ ------------------------------ ------------------------------ ---------------------- ------------------------------ ------------------------------------------------------------------------------------
  000007FFB7701608 000007FFB7743350 1518838670 6hqw5p9d8g8wf            0 TESTUSER     T12                            SYS_DEFAULT                    T_SEC                  TESTUSER                       ID < 10
  

  As noted above, the VPD test function named S added the predicate "ID".< 10"="" to="" the="" sql="">

  There are not many clues in the 10053 trace file in my test VPD generated additional predicates. Trace the following was found shortly after the beginning of the file (this is the SQL statement initially presented):

  ----- Current SQL Statement for this session (sql_id=6hqw5p9d8g8wf) -----
  SELECT id, pad
    FROM t12
    WHERE
    spy(id, pad) = 1
  

  I searched then down in the trace for final after changes query file (to be noted that this sentence could be slightly different in different versions of database Oracle). That's what I found:

  Final query after transformations: ******* UNPARSED QUERY IS *******
  SELECT "T12"."ID" "ID","T12"."PAD" "PAD" FROM "TESTUSER"."T12" "T12" WHERE "TESTUSER"."SPY"("T12"."ID","T12"."PAD")=1 AND "T12"."ID"<10
  kkoqbc: optimizing query block SEL$F5BB74E1 (#0)
  

  Note that the final query after transformation shows how the final version of the query that has been rewritten by the query optimizer before the SQL statement has been executed and this version of the query includes AND "T12". "" IDENTITY CARD ".<10. if="" i="" was="" attempting="" to="" determine="" how="" that=""><10 predicate="" was="" added="" to="" the="" sql="" statement,="" i="" would="" start="" at="" the="" "current="" sql="" statement="" for"="" line="" in="" the="" trace="" file="" and="" search="" down="" the="" trace="" file="" for=""><10* -="" in="" this="" case,="" the="" following="" is="" what="" i="" found="" as="" the="" first="" search="" result,="" very="" close="" to="" the="" "current="" sql="" statement="" for"="" line="" in="" the="" trace="">

  **************************
  Predicate Move-Around (PM)
  **************************
  PM:     PM bypassed: Outer query contains no views.
  PM:     PM bypassed: Outer query contains no views.
  query block SEL$F5BB74E1 (#0) unchanged
  FPD: Considering simple filter push in query block SEL$F5BB74E1 (#0)
  "TESTUSER"."SPY"("T12"."ID","T12"."PAD")=1 AND "T12"."ID"<10
  try to generate transitive predicate from check constraints for query block SEL$F5BB74E1 (#0)
  finally: "TESTUSER"."SPY"("T12"."ID","T12"."PAD")=1 AND "T12"."ID"<10
  

  As can be seen from the above (because the predicate again appeared before and after the line containing the word "Finally: '), the AND"T12 ". "" IDENTITY CARD ".<10 predicate="" was="" already="" added="" to="" the="" original="" sql="" statement="" by="" the="" time="" the="" predicate="" move-around="" section="" of="" the="" trace="" file="" was="" written,="" and="" that="" is="" the="" first="" mention="" of=""><10 in="" the="" trace="" file.="" in="" your="" case,="" you="" would="" search="" the="" 10053="" trace="" file="">

  "SEAL_FLAG" IS NULL
  

  If V$ VPD_POLICY revealed that there are virtual private database (VPD) generated predicates applied to the SQL statement, take a look at the following article in the Oracle documentation library:
  http://docs.Oracle.com/CD/B28359_01/network.111/B28531/VPD.htm

  This article lists the different points of view, who can be interviewed to learn more about the VPD rules which are in force in the schema. For example, with my SPV test:

  SELECT
    *
  FROM
    ALL_POLICIES;
  
  OBJECT_OWNER                   OBJECT_NAME                    POLICY_GROUP                  POLICY_NAME                    PF_OWNER                       PACKAGE                       FUNCTION                       SEL INS UPD DEL IDX CHK ENA STA POLICY_TYPE              LON
  ------------------------------ ------------------------------ ----------------------------- ------------------------------ ------------------------------ ----------------------------- ------------------------------ --- --- --- --- --- --- --- --- ------------------------ ---
  TESTUSER                       T12                            SYS_DEFAULT                   T_SEC                          TESTUSER                       S                                                            YES YES YES YES NO  NO  YES NO  DYNAMIC                  NO
  

  He knows performance issues related to the use of VPD, some of which are Oracle Database version-dependent, and some have been fixed in recent versions. Take a look at the following articles if you have access to My Oracle Support:
  MetaLink (MOS) Doc ID 728292.1 ' known performance problems when you use transparent encryption data and indexes on the encrypted columns.
  MetaLink (MOS) Doc ID 967042.1 "How to investigate Query Performance regressions Caused by VPD (FGAC) predicates?"

  You might find working through the second of the above that the problem is caused by a bug in database Oracle.

  On a side note. Execution plans you have published include the 0 value in the column starts many of the operations in the execution plan. 0 indicates that the operation never actually executed. A 0 is included in the column starts on the line that includes the FULL ACCESS of TABLE of PEOPLE_TRANSACTIONS at least to the OPC. Value 123, a full table of PEOPLE_TRANSACTIONS table scan PROPERTY_CONTAINER_ID was not actually performed.

  Charles Hooper
  http://hoopercharles.WordPress.com/
  IT Manager/Oracle DBA
  K & M-making Machine, Inc.

• Storage/not using the printer for a period of time extended

  I have a Photosmart 6520 printer which is not used for a period of 6 months each year.

  The last time, I removed the cartridges and stored in an airtight container. When the reactivation of the printer, it has no print at all, but after many attempts to clean and/or align the print heads, he is slowly back to normal operation.

  My question is: what is the best ink cartridges must be left in the printer or deleted during this period?

  It is best to leave them in the printer. Once these special cartridges have their orange shipcap removed, I always recommend to leave in the printer, if you go to the store for a while.

• BlackBerry Bold 9700 smartphones may not use the phone for voice

  I could use the phone to talk about yesterday, today, it looks like by clicking in the background and can not hear the other party. The appeal says connected. Email is ok, ok, ok ok BBM, just the voice Internet service SMS does not work.

  V5.0.0.442 (Platform 5.1.0.121)

  Recharged using BB Desktop software. Service provider indicates phone is probably failed.

  It's either a problem with the speaker of the device or the headphone jack.  Try plugging in a few times and then try a phone call without it.

• I stop using the computer for a few minutes. Then the screen of the computer turns off. Its does not sleep I need to turn off the computer then put into market and re - turn on the computer.

  If I have not used the computer for a few minutes then the screen of the computer turns off. The computer is not sleep. I tried to use the space bar to wake him but he won't answer.  I have to turn off the computer. Then turn on the computer. This has happened for 2 months. I have a Dell DM051, 446 GB HDD with 329 free GB, 2 GB RAM, Intel (r) Pentium (r) CPU 2.80 GHz, ASUS A7 Series 240 and Windows 8 Pro graphics. I replaced the graphics card because I thought that this could be the problem, but it wasn't. I need to replace to fix this? Thanks for your help.

  You have disabled things like Hibernate and hybrid sleep, etc. on the power options screen in Windows?

  Have you checked the USB settings in the Device Manager? Search tab power management for each listed root USB hub and uncheck the box "allow the computer to turn off this device...". »

  And do the same for entries under Human Interface Devices (HID) device as Manager.

  Then restart...

• Why the first Firefox page tell me that I do not use the latest version when the "about" in the menu help says I?

  I updated Firefox 2 days after seeing the message that I was not using the latest version. Download and install led and everything seems to work normally except that I still have a message on my Firefox home page telling me that I'm not using the latest version. If, on the other hand, I navigate to 'Firefox' - 'help' - "On Firefox" I tells me that I'm running Firefox 8.0.1 and "Firefox is updated.

  You can see this message under the Google search box on www.google.com/firefox which is the old default Firefox homepage. It seems that this page is no longer maintained. You seem to have Firefox installed with the latest version 8.0.1.

  If you want to than the Google search page as homepage, change your homepage to Subject: House (a new update version is now integrated into Firefox).

  • See-> http://support.mozilla.com/en-US/kb/How+to+set+the+home+page

  Also see-> https://support.mozilla.com/en-US/kb/Finding+your+Firefox+version
  
  You can also see your version on the help > troubleshooting information display

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin

  * Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox

  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• After that installation of 9.3 iPad will not activate, it has been restored, but still not turn on. The first owner does not know the password

  After that installation of 9.3 iPad will not activate, it has been restored, but still not turn on. The first owner does not know the password

  And this is not recognitze by any device, computer or iPhone 6plus.

  If you or the original owner did not have the password no one here or at Apple can help you.

• still not entering the first CC of the Cloud, how can I burn a DVD

  still not entering the first CC of the Cloud, how can I burn a DVD?

  See: http://forums.adobe.com/thread/1238080?tstart=0

• Error "you do not use the Type of appropriate phone cord.

  Having a problem with my fax on my HP Officejet Pro 8500 wireless.  Tried to send a fax, it received a transmission error.  I run fax test and she came back with "you do not use the type of appropriate phone cord.  Nothing has changed since I last fax would be but I check the lines and connections, everything seems ok.  Phone jack is connected to 1 line and Officejet 2 - ext"is connected to the phone.  I use a dedicated phone # and the Officejet is set to auto answer.   I can call and receive calls on the phone to connect to the Officejet.  My hypothesis is that because I can use the phone without problem there nothing wrong with the phone line.  Any ideas?

  I had the same problem.  I am using a phone cord 2-wire supplied with the printer and still get this error.  It turns out that it is bound to have a telephone connected to the printer.  If I unplug the telephone shape of the intake extension on the back of the printer, then the fax test passes.   I used even a cord 2-wire on the telephone, but it seems that the mere fact of having a phone plugged into the outlet of expansion will cause this error.

  Run the test without a phone plugged into the outlet of extension of the printer and you should be fine.

  Worked for me!

• DeskJet 710C still not eject the last page

  Recently I've stepped over XP 12 Xubuntu. During all seemed to install and my deskjet 710 C was acknowledged (USB configuration). However the printer still not eject the last page, when I use the color cartridge and the last lines do not print correctly. (Black and white is fine)

  (The printer will also print colors wrong of a jpg file that has been inserted into a document in pdf, but I don't know if that is related).

  In addition she also will not eject the last page when another computer on my network printing through sharing. (Last page does not eject if I try to print from another computer, either in color or black and white).

  It is perhaps interesting to note that the paperformat by default after that installation has US letter, while I use A4. I tried to print after changing to A4 and after having changed to A4 and reboot...

  Help, please...

  Thanks in advance.

  Kind regards.

  Victor.

  Found 2 low-tech solutions:

  I used an old parallel cable and printing has managed since then!

  The problem of color was a cartridge empty, followed by a new but default cartridge.  The third cartridge worked.

  I can print everything from anywhere in my network now.

• Can I use the clip for a not for profit organizations logo?

  I am the Secretary of our local pony club and that we're not for profit organization and no funds were little I was wondering if we can use the clipart for our logo images. They would appear on t-shirts, hats, brochures and the fixed overhead... I read the above but instead of going and reading of the huge document on the copyright laws, I thought that I would ask here first.
  Thanks in advance for your answers.
  Chenoa

  Hello

  It really depends on who has the copyright and their wishes. There are several clip art images
  in the public domain.

  Here are a few.

  Public domain clip art.
  http://www.pdclipart.org/

  http://www.WPClipart.com/

  http://openclipart.org/tags/public%20domain

  http://openclipart.org/

  More can be found usng Bing or Google.

  If this is not the case in the public domain then you need to know the law and to check with the owner of the copyright.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Computer will not use the drive when you restart.

  I have a Pavilion dv 9000 and had problems more and more lately (win explorer fails, application launcher fail, blue screens, crashes etc.).

  I decided to use the recovery disk that was created at first boot. According to all the manuals that I found (on - and offline), it is just to put the recovery disk in the DVD-ROM and restart.

  The problem is that nothing happens. The computer does not use the disk when it reboots.

  Anyone experienced the same problem with the recovery disk?

  I'm not having any other problems with the ROM, works perfektly once Windows is running.

  Thank you

  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Prepaid subscription for one year, but may not use the apps a month later after the purchase

  It's the customer service very frustrated that I saw, and I don't know why, it's very difficult for them to solve the problem. It has been a few days and I still can't use applications. I bought the prepaid for a year last month 28/04/2016, but started last week, he highlighted when I open apps, renew your subscription. My account on the website became creative Cloud free membership and no order history. I tired to support several times online content and they have always said that we have escalated your case anyone of higher level and the dedicated team who will contact you back or it will be fixed in a few hours, or tell me to wait another 24 hours, but so far, no contact me back and I still can't use the app I paid. I really need apps for work and they offer no other option that I can use apps while they solve the problem. It seems that I caused the problem, not of failure of their system and they don't really care the user problem.  Since the case need to the person of level greater than resolve, why I can't just s talk to a greater person directly?

  Case # 0218718387

  Hello

  Please see 'Renew your membership' message when you start an Adobe Creative Cloud application

  Hope that helps!

  Kind regards

  Sheena

• Hello. I bought Lightroom, paid license 1 year view, did not have serial. E number and then past the 30 day trial and may not use the product or work more hard. I paid has been deducted from my credit card. How I'm going to work now?

  Hello. I bought Lightroom, paid license 1 year view, did not have serial. And number and then past the 30 day trial and may not use the product or work more hard. I paid has been deducted from my credit card. How I'm going to work now?

  Hi Sergior96769872,

  I saw your Adobe ID (email address), you used to post on the forums, and I see an active subscription on it.

  Please see Help below links: { make sure you use the same Adobe ID (email address) that you used to purchase the subscription }

  Connect and disconnect activate Cloud Creative applications

  Adobe Creative Cloud apps back in test mode after 2015 set CC to update

  * NOTE: Make sure that your firewall of your computer or security software firewall does not block Adobe, if you are not sure of it can just disable the firewall for a while and then log off and log on creative application of cloud and check.

  If it still gives you an error of the trial, then please refer to the troubleshooting listed below:

  If you are using MAC:

  1-force Quit the sub process in the same sequence as shown below from Activity Monitor: see, use the monitor activity on your Mac - Apple Support

  • Creative cloud
  • Basic timing & sync to basic support
  • CC library & process CCX
  • Adobe Common Desktop
  • Adobe update daemon
  • Broker CIB Adobe
  • After that, everything that said adobe on it do a force quit for her

  2 - right click on the Finder icon, then select the "Go - To" folder. You will get a text box, type in the following command and then press the 'return '. ("Not to be missed ~ symbol")

  ~/Library (it will open the folder of the user's library.)

  3. browse to the Application Support > Adobe > trash OOBE folder and folder AAM Updater

  4 - CUT any installed security software with firewall system.

  5 - go to: Apple icon > system preferences > Security & Privacy > General > "allow applications downloaded on" change this anywhere (to make these changes click the padlock in the corner at the bottom left of this window and enter your computer password)

  These changes are temporary you can restore these changes back to normal once your creative cloud app is running *.

  6 - restart the cloud creative app and connect

  
  

  If you use the WINDOW:

  1 complete the process / Task Manager tasks in the same order, as mentioned below the Manager tasks. See, Open the Task Manager

  • Creative cloud
  • Basic timing & sync to basic support
  • CC library & process CCX
  • Adobe Common Desktop
  • Adobe update daemon
  • Broker CIB Adobe
  • After that, everything that said adobe on it do a force quit for her

  2 - C:\Users\\AppData\Local\Adobe\ MAA UPDATER and two OOBE (App data & Program Data is hidden folder please see, Show files and folders hidden in Windows 7, 8.x, 10, or Vista)

  3 - CUT any security software installed with firewall system, also if your having any browser Add On installed for blocking advertising that turn off too.

  These changes are temporary you can restore these changes back to normal once your creative cloud app is running *.

  4 - raise the cloud creative app and connect

  Let us know if that helps.