Question of hardware replacement

Similar Questions

• Qosmio G10: Question about motherboard replacement

  I bought the G10 around 2 years there are in the United Kingdom and who now live in New Zealand.

  I would say it has been a faithful companion, but looking back it cost much to get anything done, because of the ridiculous prices of the FSA.

  I experienced a power supply, two hard drives, my touch pad no longer works and now the GPU (graphics card) is dead.

  I'm sure that most of the people on this forum knows, that is, replacing the motherboard because it is on board.

  I am out of warranty and replacement cost is more than a qosmio second hand of the same age.

  Having done a lot of research on the internet about it.
  I found out that Toshiba US will free of charge replace the motherboard. I asked Toshiba AUS/NZ and they refused him, that it was not a problem.

  Toshiba UK/Europe does, or is it just the Toshiba US that cares about its customers?

  [Edited by: admin on 20-Sep-2007 07:11]

  Hello

  It's very sad to hear that! :(
  I want to share my knowledge on the Toshiba us and Europe.
  As I know the Toshiba us has nothing to do with Toshiba Europe or Australia/New Zealand.
  Portable computers designed for the American market are simply different and also supports different parts and numbers; for example the Qosmio G10 or G20 are not available in the United States but only the Qosmio G15 or G25, etc.

  If you have problems with your hardware, you must contact the partner service manager authorized in your country for further assistance.

  Regarding your question.
  Yes, it really looks like a malfunction of the GPU (graphic processor unit). This graphics chip is fixed on the plateau and in the majority of cases, the whole Board needs to be replaced!
  As you know, these hardware problems could still happen because the new age books are of the high-end products that work always with high performance.
  That s nothing unusual.

  I bought a year ago from G20 and I bought an extended warranty on avoid such troubles.
  So, I always recommend buying the extended warranty in the future.

  Good luck and best regards

• Satellite 4090xcdt - Question about hardware upgrade?

  Hello!
  I want to upgrade the hardware in my old satellite 4090xcdt so I want to know what is possible.
  1. HARD drive: is there a maximum or something else?
  2 DVD: is it possible to replace the CD on a dvd player? How can I remove the cd player?
  3 CPU: is it possible to replace the CPU with a bit more recent? If so, how?

  Thank you in advance!

  Hello

  This unit is an oldie. It s about 7 years and as far as I know it has been bundled with a 4 GB HARD drive.
  Unfortunately I put t believe that more HARD drive be recognized on this laptop.
  The series XCDT supports 4GB max and XDVD series supports hard drives 6 GB.
  Xdvd models were shipped with a DVD - rom drive and these models have been supported: SD-C2102 and SD-C2202
  In addition, it is not possible to upgrade the processor.

• Questions about the replacement of a power supply for a P7-1235

  I decided to do an update on my Pavilion P7-1235. I put in a graphics card and put in power level. After doing some research on this forum and others I know well enough that I need. The only question I have is about the food. I don't know what the original power supply. There is a vent on the side where it however. So I guess that there is a fan on this side of the power supply. This eating plan I get:

  http://www.Newegg.com/product/product.aspx?item=N82E16817139050 & TPK = % 20500% 20% 20modular %2 watt Corsair...

  I noticed that the fan is on top? Now there is no high ventilation in my P7-1235, I worry for nothing? I think that all the supplys to look the same. What is the top of the fan page for? Or can anyone suggest a replacement perfect for my exact Pavilion model?

  Sorry if the questions are stupid, but I'm still learning and want to do what I can myself!

  Hello

  Yes, you can use the power supply the same way. The image is in a vertical position for the convience of the buyer. I have the same with number of power supplies and it was fine. You can check the following links people have set up exact POWER supply in different ways.

  http://pcpartpicker.com/builds/by_part/Corsair-power-supply-cx500m

  However, please be aware of your power supply size and your case. If you have all materials/components in stock for your computer, then it is what it is;

  ATX case:

  : Height 39.4 (15.55 inches)

  Width: 17.5 cm (6.89 in)

  Depth: 40.9 cm (16,14 inches)

  PSU stock:

  (5.9 x 5.5 x 3.4 inches)

  And the power supply you want;

  Corsair size;

  "5.9"x 3.4"x 6.3"

  As you can see the length of the Corsair is considerably larger than your stock of power supply. This could hampor of air or could even make it so the holes of the PSU and the case does not match. However, this is usually not what worry. The height and width that should be worried because the length rarely causes problems, I wanted to just make sure that you knew in advance.

  Take advantage of your power supply; Corsair is a great brand.

• A small question about the replacement of the DVD in a HP Pavilion dv6 - 2057cl

  I need to replace the DVD drive in this dv6, and I wonder if there is room for manoeuvre with regard to the replacement drive.  Can I use another drive to disc HP with a similar model # or am I limited on drive 'identical '?

  Some quick info follows:

  OS = Windows 7 home premieum (32 bit)

  The disk removed from the laptop:

  DVD Super Multi writer

  MODEL: GT20L

  FW: DC05

  HW: A2

  TYPE: AMCK702

  CT: 7AXVK012GY3NRY

  HP mPC REF: 461646-6 c 2

  S/N:
  {Removed privacy}

  MANUFACTURED: OCTOBER 2008

  I found a replacement with the same 'model' and even 'HP mPC PN' but it was made in 2009, and I don't know whether or not the implementation of the SATA connection on the rear of the car fits.

  Any help is very appreciated!

  Thank you

  DaFlash

  It seems that the reference is the same. As long as the part number is the same, it is essentially the same part and should work without any problems. The only time where this part can fail if the part number is different. If a part is different from another part (software, hardware, etc.), it will have a different reference number. Also long that 461646-6 c 2 is identical on both, there is no problem with the disk replacement.

• Question about the replacement of the dilapidated old Airport Extreme

  I have an old Airport Extreme, probably about 8 years old.   There seem to be wonky on me.  I tried everything, including resetting to the factory settings.  In any case, the point is that I have to replace the unit.  However, it is mounted in a box electric wall unit, which is not deep enough to contain the new style 'vertical' Airport Extreme which is meant to sit on a desk. It is about an inch too wide.  This new design really * for my situation.

  So, I'm stuck with a choice to replace it with another employee (or I think that some are still box on Amazon) old Airport Extreme, or with another unit of the brand that does the same thing.  Of course, I prefer to stay with Apple, like all my Airport Express, my Time Capsule airport and all our devices are Apple.

  What is the best choice?

  There is a third choice: install the new unit somewhere else than in an electric box armoured, metal. This is not a good location for any wireless device.

• Qosmio G30-149RU - Question about hardware upgrade (CPU)

  Hello

  I have a toshiba qosmio G30-149RU and my question is possible to make these changes?

  Intel® 945 PM Express chipset

  Intel Core Duo T2500 to Intel Core 2 Duo T7600 processor
  2x512MB DDR2 533 2x2gb DDR2 667
  2 x 100 GB 5400 RPM RAID HARD drive with 128 gb SSD + 500 GB 7200 RPM HARD drive

  one last thing, my qosmio I have NVIDIA GeForce Go 7600 256 MB, but I don't know if it is possible to change or not. If possible, what video card will be the best?

  Sorry for my bad English and thanks for help :)

  P.S.: I got to the House 128 GB ssd and 500 GB hard drive, but others, I'll buy. CPU nearly $ 100, ram near $ 40...

  > one last thing my qosmio I NVIDIA GeForce Go 7600 256 MB, but I don't know if it is possible to change or not. If possible, what video card will be the best?

  No, the graphics card can not be upgraded

  What you can do, it is memory and the upgrade of the HARD drive. This should be very easy and should cause no serious problems.

  Upgrading CPU is little tricky.
  On the page of the Ark from Intel, you can check what are the processors supported by Intel 945 PM Express chipset
  http://Ark.Intel.com/products/27858

  These are:
  Intel Core Duo L2300 of processor (Cache 2 MB, 1.50 GHz, 667 MHz FSB)
  Intel® Core Duo L2400 of processor (front-end to 667 MHz 2 MB Cache, 1.66 GHz, bus)
  Intel® Core Duo processor L2500 (1.83 GHz, 667 MHz FSB, 2 MB Cache)
  Intel® processor Core Duo T2050 (1.60 GHz, 533 MHz FSB, 2 MB Cache)
  Intel® Core Duo T2250 of processor (Cache 2 MB, 1.73 GHz, 533 MHz FSB)
  Intel® Core Duo processor T2300 (1.66 GHz, front side bus at 667 MHz, 2 MB Cache)
  Intel® Core Duo T2300E of processor (front-end to 667 MHz 2 MB Cache, 1.66 GHz, bus)
  Intel® Core Duo processor T2400 (1.83 GHz, 667 MHz FSB, 2 MB Cache)
  Intel® processor Core Duo T2500 (2.00 GHz, 667 MHz FSB, 2 MB Cache)
  Intel® Core Core Duo T2600 (2.16 GHz, 667 MHz FSB, 2 MB Cache)
  Intel® Core Duo processor T2700 (2.33 GHz, 667 MHz FSB, 2 MB Cache)
  Intel® Core Duo processor U2400 (1.06 GHz, 533 MHz FSB, 2 MB Cache)
  Intel® Core Duo U2500 of processor (Cache 2 MB, 1.20 GHz, 533 MHz FSB)
  Intel® Core Solo T1300 processor (1.66 GHz, front side bus at 667 MHz, 2 MB Cache)
  Intel® Core processor Solo T1350 (1.86 GHz, 533 MHz FSB, 2 MB Cache)
  Intel® Core processor Solo T1400 (Cache 2 MB, 1.83 GHz, 667 MHz FSB)
  Intel® Core processor Solo U1300 (1.06 GHz, 533 MHz FSB, 2 MB Cache)
  Intel® Core processor Solo U1400 (Cache 2 MB, 1.20 GHz, 533 MHz FSB)
  Intel® Core 2 Duo Processor T5500 (1.66 GHz, front side bus at 667 MHz, 2 MB Cache)
  Intel® Core 2 Duo processor T5600 (1.83 GHz, 667 MHz FSB, 2 MB Cache)
  Intel® Core 2 Duo processor T7200 (2.00 GHz, 667 MHz FSB, 4 MB Cache)
  Intel processor Core 2 Duo T7400 (Cache 4 MB, 2.16 GHz, 667 MHz FSB)
  Intel® Core 2 Duo Processor T7600 (2.33 GHz, 667 MHz FSB, 4 MB Cache)
  Intel® Core processor Solo U1500 (Cache 2 MB, 1.33 GHz, 533 MHz FSB)
  Intel® Core 2 Duo processor L7200 (Cache 4 MB, 1.33 GHz, 667 MHz FSB)
  Intel® Core 2 Duo processor L7400 (1.50 GHz, 667 MHz FSB, 4 MB Cache)
  Intel® Core Duo processor T2350 (1.86 GHz, 533 MHz FSB, 2 MB Cache)
  Intel® Core Duo T2450 CPU (2.00 GHz, 533 MHz FSB, 2 MB Cache)
  Intel® Core processor Solo T1250 (1.73 GHz, 533 MHz FSB, 2 MB Cache)

  However, there is a question again about the BIOS support. You need to test everything.

• Satellite A200-1GH. Questions about the replacement of HARD drive

  Someone made about?
  Consider replacing _TOSHIBA MK1237GSX factory-installed ATA Device _ with HDD 320 Gb SATA - II MK3252 _Toshiba GSX_ (120±, 5400 RPM, SATA-II)

  What I'll do with the hidden partition of Windows Vista that is used for the start?
  Is it possible to ignore it?

  Any suggestions?

  > What should I do with a hidden partition in Windows Vista that is used for the start?
  The hidden partition is needed for the repair of the system!
  If something goes wrong with the system, Vista would be able to repair the system using the files from the hidden partition.
  The Vista operating system creates this partition automatically during the installation of the OS!

  After you change the HARD drive, just start using the Toshiba and Vista recovery disk should create the partitions and must run the installer automatically

• Question about the replacement of keyboard

  Hello world

  I have a problem with my key number six works do not, but have not cracked, but my games and, therefore, my enjoyment of the weekend are on this laptop.

  How long would take to be done under warranty? Clues would be useful.
  Thank you.

  Hello

  I don't know what model of laptop you have, but keyboard replacement is completed in a few minutes. The problem is how long he wants to takes control again. You must contact the partner in your country. Talk with them. Maybe they have keyboards in stock.

• questions of failure/replacement of Time machine

  I have an old time machine that was failing and I'm going to buy a new drive. When I get the new drive:

  1. How do I format it?
  2. is there an advantage to making it be bootable?
  3. If so, how I would be bootable?
  4. is it possible to copy the contents of the current time machine disk to the new disk? The old time machine disk drive is 500 GB, and I don't have 500GB free on my disk system hae. Should I just unplug the old drive and I only connect if I can't find a file? In addition, 500 GB drives no longer seem to be available. The smallest drive available now is 1 TB.
  5. Is it possible that the failures of time machine, I had are with the time machine of tine software, not the drive? I'm under mountain lion. I don't want to update to OSX, because I do not know if all applications will break.
  6. the reason why I asked question 5 is that when the disc goes down, I disable the mac, disconnect/reconnect the time machine, turn on mac. It is possible that the mac start-up is enough, and I don't need to disconnect/reconnect the time machine. Thoughts here?

  Time Machine FAQ

  1 mac OS extended (journaled).

  2 & 3. I don't know the answer to these questions.

  4. try to use disk/restore to copy the backup to a new location. Please note that this will reformat the destination partition.

  5. more than information would be useful. What type of chess?

  Application compatibility

  (2) application compatibility

  Information on the compatibility of 10.11 El Capitan

  6. reboot may be sufficient.

  Troubleshooting you can try.

  Troubleshooting of Time Machine

  Solving the problems of Time Machine

• HP envy 15 "beat edition: hp envy 15" question about hardware

  Hi, I just opened my laptop Hp Envy Beat edition 15 "to replace the 8 GB of ram, and I noticed that there is an empty slot near the hard drive (see image, right on the left). the code is CS1950. Can you tell what is supposed to be for?

  This is a location for an mSATA SSD. Check out the video below.

• 2 questions: win8 license & replace the AC adapter / CC

  Hello.

  I have an acer V5-552 G-X 414 and I replaced win8 with win7 and I want togo to return. There is no sticker on the back for windows serial.

  Where can I get it back?

  Also, I've lost the adapter a/c and im trying to buy a replacement.

  Does anyone know the model of the adapter?

  Thank you.

  -Ricardo

  You can use an adapter with power specification 19V 65W or 90W.

  Here are some name of card manufacturer and part of the numbers supported by this model

  You can contact Acer store and buy the adapter.

  65W adapter Chicony AP.0650H.003,

  AP.06503.031 LITE-ON 65W adapter

  KP.06501.002 DELTA 65W adapter.

  AP.09003.024 LITE-ON adapter 90W

  KP.09001.001 DELTA 90W Adapter

  Chicony KP.0900H.001 90W power adapter.

  No machine will off with Windows 8 of the seller only will be delivered with a sticker of the license of Windows 8 below, regardless of the brand.

  It is one of Microsoft's security measures to reduce piracy.

  It is a new initiative from Microsoft. The product key is stored in electronic form in the firmware of your motherboard. So if you need to reset or reinstall Windows 8, you need not hunt for the product key. It is automatically applied and activated.

  If you have not created the recovery media, you may buy Acer store.

• question about hardware dspfarm conference bridge

  Hi, I know that the software conference CUCM bridge can handl g711 calls. and under what circumstances, to use the bridge of material content?  the ISDN call is converted as g711 before he sent on the phones, and I do not see it is necessary to configure the conferencing bridge of material in normal conference call on the day the day.

  also on the same topic of DSP, if I PVDM3-32 and 64-PVDM installed on the same router and I want to configure transcoding on PVDM3-64, can I have the options to choose?

  Thank you very much.

  Roy

  Hi Roy, there may be scenarios where you have some users configured to use G729. In this case when these users try to join or use the resources of conference bridge, it will fail if you have only the software conference bridge. That's why I always advised to have resources dsp on the user of local router for the hardware conference bridge.

  Also, when the hardware configuration and software conference bridge, make sure that you do not assign them to the same GMP. The case Conference requiring a bridge material conf sometimes fails. This is because when they are assigned to the same MRG, callmanager them selects alternating. So make sure that you have separate MRG for soft conf resources and hardware.

  Yes, you can mix different PVDM3 modules in the same chassis; However, the DSP each chip in PVDM3 material has to be assigned to a task or another. For example. You can't have the same DSP chip (which there are two on the - 32 or four on part-64) assigned to do conferences and media simultaneously to terminate employment. Don't forget to use the Calculator of DSP to understand what you need.

  Please note all useful posts

  "There is a width in the mercy of God as the width of the sea. There is a kindness in his justice, which is more freedom"

• Question about the replacement of router and new network location. Is this normal?

  Yesterday, I replaced my router with a another router of the exact same brand, model, and firmware version. The only thing that has changed as far as the router will have the MAC address.

  In any case, after that I swapped the router and plugged the network cable, I could use Internet all day very well. This morning when I turned on the computer, introduced me to all of a sudden with the Wizard "Set network location", and Windows has created a new situation "network 2". Everything always seem to work well.

  I want to just make sure that it is the expected, normal Windows 7 behavior after changing a router. I'm just a little paranoid because the network location Wizard pops up only the next day, I replaced the router, and not immediately after I plugged in the cable.

  Thank you!

  Yes. It's normal.  The delay in the command prompt is a little unusual, but I've seen this before.

• Tecra S11 touchpad hardware replacement

  Hello

  How can I know * what is the number of exact part of my touchpad on my Tecra S11 *-11 H? PTSE3E-XXXXXXX

  It is a little slow, he is sometimes slow to react. I've already implemented in the extended in the mouse settings option.

  where can I buy a new one?

  In my opinion if you want to get any compatible part for all Toshiba laptops, you should contact Toshiba service provider authorized in your country.

  ASP is able to supply all the parts of the laptop. Even if the part is not available, they are able to order the essential part of the Toshiba s doll.