Question of HDD of VM and the host.
OK, so my new set upward is a box of esxi with a virtual machine of win2k3. I have 2x1To hard drives and a 40 GB running the esxi and virtual machine of win2k3 data store.
How could I make the win2k3 connect to the host's hard drive? can I do straight out or what? It will change the format?
If you do not have a VMFS partition on them you can show them as RDM devices at the prompt:
http://pubs.VMware.com/vsp40u1_i/server_config/c_about_raw_device_mapping.html
http://pubs.VMware.com/vsp40u1_i/server_config/c_managing_mapped_luns.html
AWo
VCP 3 & 4
\[:o]===\[o:]
= You want to have this ad as a ringtone on your mobile phone? =
= Send 'Assignment' to 911 for only $999999,99! =
Tags: VMware
Similar Questions
-
Dedicated network adapter to the virtual machine and the host computer not let can visit his profile
OK, here's my question, I know how to give themselves a phyiscal nic to a vmware, but I wanted to take it one step further and do not leave the host send or receive data from this network card, only the virtual machine can use this network/NIC...
Here's my reasoning, I have to network conections, one is for my internal/field network and the second is a direct connection to the internet (Comcast) I don't want to use to separate the machines have for internet connection, I want to be on the same machine phyiscal and have just the vmware machine talking to comcast... is it possible? I am running VMware workstation 7, last update.
Thank you
Cdrshm
I assume you are using a Windows host?
If Yes...
-first set up networking networking with vmnetcfg.exe
-assign vmnet0 to the network card for the internal network
-assign vmnet2 to the network card used for direct access to the internet
-Right-click on the map network-icon in the systray and access the properties of the network adapter for vmnet2
-Disable all other protocols and the Protocol of vmware_bridge for this network adapter
result: a virtual machine that uses vmnet2 can directly access the internet and the host has no IP address for this network adapter - and therefore cannot use it.
_________________________
VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual
-
Virtual LAN with guests and the host only
Hello
I have a win server 2008 r2 host and a couple of virtual machines.
I want to create a VLAN that contains the host and guest of the virtual machine. I intend to host the domain controller.
I put the network connection from the guest to "host-only '.
Then I tried ping between the guest and the host. Ping fails. "request time out" @host and "destination host unreachable'@guest.
Firewall is turned off on both.
What could be the problem? Is there another way to reach my goal?
Kind regards
Dembele.
Did you stop the firewall service, or you have turned off the firewall? Stopping the service does not work.
In any case, take a look at for example example 4 in the http://support.microsoft.com/kb/947709/en-us for how to configure ICMP (ping) settings.
André
-
Remote Desktop - conflict between the remote control and the host user?
We set up Microsoft Remote Desktop on a Mac with a remote computer that is running Windows 7 Professional.
What happens when:
1. the remote user tries to connect to the Windows host computer while someone is working on it?
2. a person is trying to work on the host computer, and the remote user is logged?
Is the second locked user, is there a warning of the conflict, or is there another way that Remote Desktop manage such a conflict?
DRM for any assistance you can provide.
Stuart A. Forsyth
E-mail address is removed from the privacy *.
Hi Stuart,
Thanks for posting your question on the forum of the Microsoft community.
The question will be better suited to the audience of professionals on the TechNet forums.
I would recommend posting your query in the TechNet forums.
TechNet Forum
http://social.technet.Microsoft.com/forums/en-us/home?category=w7itproFor reference:
http://Windows.Microsoft.com/en-us/Windows/Remote-Desktop-connection-FAQ#1TC=Windows-7Thank you
-
Update VUM 5.1 to 5.5 with a base with host and the host upgrades patches
We are currently running vCenter 5.5.0c with 5.1u1 on all hosts. We have lines of base (2) attached to these hosts. One of these baselines is dynamic with all the latest patches to be applied and the other baseline is the upgrade to 5.5.0a. We have not restored over several months and I have a question. If I leave two reference levels, AUVS will know to run the upgrade first and then patch the latest version? I want to just make sure THAT VUM does not apply time to 5.1 before moving to 5.5 patches. If there is not a good answer on that, the plan is to detach the dynamic baselines with all the patches and it reinstall manually after the upgrade to 5.5. Management doesn't like going to the latest versions and the plan is to actually update it 5.5.0a, because it is later (update1) HP. We go to patch after that, while the server is in maintenance mode, but I didn't at the margin of the baselines set if it can run 5.1 patches before moving to 5.5. I excluded the cumulative 5.5 update1 for our dynamic patch database.
Thank you
When you click on clean up host you choose the database Type, then do not worry, just select upgrade basic :-)
-
Version hardware VM and the host versions
How to see the VM version? It's hardware version or version of the summary of each virtual machine software?
Where to find the host exsi version? I see only the licensed version?
Thank you!
Yes, you need to upgrade. may be that your new company guy he have not upgraded
Now you go all versions to the latest version and supported, and clean. You can take a screenshot, save it as image shape and add it to the response using the symbol of the camera on the upper tab in the window of response.
If you have any other questions please close the message by choosing a correct answer so others can refer to it in the future
Thank you
-
Questions VC... Add the host to the new CR?
If I have problems with my VC server. It does not start for some reason, so I'm building a new. The question I have, is if my 6 ESXi hosts were connected to this VC how would I so that they know the new Victoria Cross? I know that the right way to add hosts to a new Victoria Cross would be to disconnect and then remove them from the existing VC. Any thoughts?
Thank you.
If you cannot disconnect and remove the hosts of the other environment, simply ' add host' in the new. You will receive a message saying something to the effect of «Eastern host is managed by a different vCenter...» Once you add the new host vCenter inventory, you'll be fine.
-
System Restore and the host file
How do you keep restoring the system to unblock web sites in the hosts file?
Hello
System Restore is not designed to do what you want it to do.
A system restore point contains the settings of the computer at that moment in time.
It's the idea of system restore.
http://Windows.Microsoft.com/en-pH/Windows-Vista/what-is-system-restore
"System Restore helps you restore system files from your computer to an earlier point in time. Is a way to cancel the system changes to your computer without affecting your personal files.
"These restore points contain information about registry settings and other system information that Windows uses."
See you soon.
-
Two questions on MapField (GPS permissions) and the map display
Hello world
I have two questions about the use of the Mapfield (for OS 5.0):
First of all, it is possible to invoke the Permission of GPS is fast at the start of the application rather than the first time, you open the card and use the GPS?
Second, I use a MapField in my application, and the map that appears on the device is only to show a green background with diagonal black lines and circles white - as if there were no card information to show. I tried to load many different places, and I get the same result. On the Simulator, I get the most actual plan information. Does anyone know why this might be happening?
Thank you!
regarding your first question:
use an applicationpermissionsrequest for that object.
-
IKEv2 - xml file and the host name
Hello world
Ikev2 anyconnect works very well in the PC.
Xml file in c\programs data\profile PC hostname say anyconnect_ikev2.
Under the ASDM - anyconnect profile I changed the host name to say xyz.com.
Then PC I tried to connect again and found that the connection has been established and the hostname under xml view profile: PC go to xyz.com.
Need to know how the PC has managed to connect even if the host name has changed?
Concerning
MAhesh
Mahesh,
The client connects to the base on the HostAddress profile field.
Host name, is what is used to populate the drop-down list and identifies the connection in "plain language." Although it is often the COMPLETE domain name, it doesn't have to be.
When a user makes the connection, one of the things that happens is that any changes in profile on the ASA is pushed to the locally stored user profile.
-
vCenter shows all virtual machines and the host is disconnected
Hello
I have a two nodes in the cluster ESXi6 U2 (recently updated to 5.5) running on hp dl380p gen8. For some reason all the virtual machines are running on host A (HA and DRS are enabled). vCenter shows all virtual machines and host A is disconnected. Cannot connect to A host using vSphere client or web client. Cannot vMotion the VMs. Impossible to activate SSH. Connection DCUI works very well. Cannot perform any action VM
All virtual machines are in place are running at this point. I don't want to restart the virtual machines. Can you help me please?
Thank you
AJ
Frozen screen DCUI came back to life. The active SSH access, killed the running process. The host of running backs.
See you soon,.
AJ
-
Relationship between memory of comments and the host memory usage
Hello
I noticed today that the memory usage of my cluster rose close to 90% in all of the blades. I checked and found that a number of virtual machines is everyone using over 3 GB of memory host. When I went in the performance monitor for each of these virtual machines, they used only a maximum of 400 MB.
How the memory usage of comments relate to the host memory usage, and how I can reduce the amount of memory used host so I do not have a performance hit through the cluster?
Running ESX 3.0.2, VC 2.0.2 Dell Poweredge servers with 2 processors 1.86 GHz quad core and 24 GB of RAM.
See you soon
Graeme
You can learn more about memory usage http://www.vmware.com/pdf/esx3_memory.pdf and resource management guide http://www.vmware.com/pdf/vi3_35/esx_3/r35u2/vi3_35_25_u2_resource_mgmt.pdf
If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!
Kind regards
Stefan Nguyen
VMware vExpert 2009
iGeek Systems Inc.
VMware, Citrix, Microsoft Consultant
-
We have warehouses of data which are seen by more than one cluster. I need a script that will display:
all stores of data seen by a cluster
the virtual machines on the data store
the host of the virtual machine is on
the cluster the host is in
The output I want is
name of the store of data, the VM name, host name, the name of the Cluster
any help would be appreciated
Pretty sure this will do what you need:
$report = @() Foreach($cluster in Get-Cluster){ $datastores = $cluster | Get-VMHost | Get-Datastore foreach($datastore in $datastores){ $vms = $datastore | Get-VM If ($vms.count -ge 1){ foreach($VM in $vms){ $object = New-Object -TypeName PSObject -Property @{ Datastore = $datastore.Name VM = $VM.Name HostName = $VM.VMhost Cluster = $cluster } $report += $object } } } } $report | Export-Csv C:\Temp\VMs.csv -NoTypeInformation -UseCulture
If you only want to shared data warehouses you can then use
$datastores = $cluster | Get-VMHost | Get-Datastore | Where {$_.Extensiondata.Summary.MultipleHostAccess -eq $True}
Hope this helps
-
I want to be able to see the webcams of all participants in the room, if they have active, but all participants must only be able to see the host from the host. Is this possible?
No, the view is the same for everyone in the room, regardless of the role within the room.
-
Hi all
I have 02 questions.
1. we have a cluster which has 02 physical hosts (Host1 and Host2). We have 02 virtual machines on the Cluster. Active DRS on the cluster.
But the problem is that my 02 VMS are always stays on a Host2. A few weeks ago, each virtual machine carried out on each host. How can I place each virtual machine on each host to perform better.
How to do this?
2. I connect to the cluster using vSphere client 5.1, under summer host, I get the following message
"Configuration problems: host is not in accordance with the attached profile.
I suspect that this is the case for my question 1?
Thank you very much
Hello
I think I found the answer for the problem of home profile. I changed the following values to 1 for each host to > settings > under software > advanced settings >
Under Data Mover
HardwareAcceleratedInit
HardwareAcceleratedMove
Under VMFS3
HardwareAcceleratedLocking
Compliance status is returned to the green.
Thanks for the advice guys!
Thank you
Maybe you are looking for
-
Laser Jet Pro 500 570dn: error scan
Since the first install this printer, I received an error "Scanner 13". The info on the help says to turn off the printer and restart - it did not work. I've looked everywhere I found on the HP site and found no information about this error code or
-
Too small paper - error message
My HP Photosmart print on plain paper, fine, but sometimes, when I put in the paper that measures identical to ordinary paper 8.5 "x 11", he refuses to print and gives me an error message indicating that my document is too small. I'm trying to print
-
My password is not letting me connect to my administrator account.
I stopped using my computor 2 months ago and when I turned on it back and try to sign in with my password, windows won't accept, he says is the wrong password, but my daughter and I have both used the computer so I asked if she recalled the password
-
Silverlight has been installed on my dell with media player and after that the tuner has stoped running silverlight would have something to do with it? I get a low rate and no signal tuner.
-
Splitting column into several lines dynamically
Hi allI had only one requirement, for which I am not able to find a solution. Please help me to write the SQL query to do this.Requirement isWe have a table e.g. PLAYER_SCOREReader ScoreAmar87,56,100Akbar62Antony91, 23Expected result isReader ScoreAm