Question of Panel throw

Similar Questions

• Two screen question: Control Panel appears on the screen 1 but the mouse is on the screen 2 and so I can't access

  I have a Sony Vaio laptop connected to a stand alone monitor. I don't use the laptop screen unless there is a problem and then I had to alternate between the two screens using Fn F7 key.

  A problem has occurred with the rundll32 process (which I'm trying to fix separately) and this led to the PC automatically flicking between screens and then stick with the independent monitor but in low resolution (so I couldn't access the tool bar along the bottom).

  I went to control panel to change the resolution to high, but the question of rundll32 kept close the process.

  This left me with icons on the desktop of the monitor stand alone, a white color on the laptop screen (it is normally black) and the ease of Fn F7 does not (said the service is not available).

  When I click on Control Panel on the screen of stand alone, it opens on the screen of the laptop, but I can't access it because the function of the mouse is on the screen to stand alone.

  Can someone help before I go out drinking?

  Thanks, Temp.

  I seem to have solved the problem. It seems that display order has been reversed and so I just had to move the mouse to the right of the screen to stand alone (I had been pushing against the left hand side) to move on the screen of the laptop. From there on, I played a bit with the display settings in the control panel and, although the issue of the always kept dllrun32 throw me out, seems to be back on the screen of stand-alone only, with the correct resolution and the Fn f7 works again. This means I can put the top back on bottle of vodka, at least until the next issue of dllrun32 arises.

• WHT part of the computer is the question Control Panel, I can not uninstall anything, never had a program before

  I'M TRYING TO UNINSTALL THE WEATHER MAX CHANNEL OFFICE AND REINSTALLED, BUT THE WIZARD WILL NOT UNINSTALL IT...

  I DELETED COOKIES, CLEANED THE REGISTRY, REBOOTED, WENT INTO SAFE MODE AND I TRIED TO UNINSTALL IT...

  GO TO START MENU AND TYPE IN WEATHER CHANNEL AND NOTHING NO SE PRESENT...

  I DON'T KNOW WHAT THAT I'MDOING BAD, NEVERHAD THIS PROBLEM BEFORE...

  Hi Samschuler,

  This can happen when the uninstall file is corrupted.

  I suggest to follow the steps below and we update on the State of the question.

  Method 1: Check out the following link to access the programs and features to uninstall the
  Office max.
  http://Windows.Microsoft.com/en-in/Windows7/uninstall-or-change-a-program

  If you are unable to uninstall programs and features, go back to the next method.

  Method 2: Run the following link and check.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/program_install_and_uninstall

  If you have additional questions, or if this problem persists, come in and we will be happy to help you.

• String question ScriptUI Panel resources

  I have created a small tool to use to keep my projects organized and want to create a drop down list that will contain the broad list of rendering templates I created. At the present time, for the trial (since I'm new on ExtendScript), I just trying to transmit a pre-created table of a function so that I can build in the code to display rendering models later.

  {

  function joshPipe (thisObj) {}

  function joshPipe_buildUI (thisObj) {}

  var pipePanel = (thisObj instanceof Panel)? thisObj: new window ("palette", "Josh Pipeline", undefined, {resizable: true} ");

  var rsdPath = "workspace has not loaded ';

  var presetList = ["make model 1', 'make model 2', 'make model 3'];

  GetExtension() {} function

  return 'project manager ';

  }

  function getPresets() {}

  List = ['make model 1', 'make model 2', 'make model 3'];

  back list;

  }

  queueTab = ' group {orientation: 'column', alignment: 'fill', alignChildren:------['fill ', ' fill'],} ".

  Group0: group {orientation: 'column', alignChildren: 'fill'------}

  loadPipeButton: button {text: 'Installation work space'}, \

  },\

  Group1: Panel {orientation: 'row', text: 'Render Settings', alignChildren: ["fill", "fill"],------}

  group1_1: group {orientation: 'column', alignChildren: 'left',------}

  fullRadioButton: RadioButton {text: 'Full (delivery)'}, \

  halfRadioButton: RadioButton {text: "half (review)"},

  },\

  group1_2: group {orientation: 'column', alignment: 'just'------}

  renderTemplateDD: DropDownList {properties: {items: ['model 1', '2 ', 'model 3']}}, \

  },\

  },\

  Group 2: group {orientation: 'column', alignChildren: 'fill'------}

  rsdString: StaticText {multiline: 'true', text: ' "+ rsdPath +" "},

  renderButton: button {text: "Making Setup",},

  },\

  }}";

  pipePanel.grp = pipePanel.add (queueTab);

  var loadPipeCtrl = pipePanel.grp.group0.loadPipeButton;

  var fullRenderSelCtrl = pipePanel.grp.group1.group1_1.fullRadioButton;

  var halfRenderSelCtrl = pipePanel.grp.group1.group1_1.halfRadioButton;

  var renderTemplateDDCtrl = pipePanel.grp.group1.group1_2.renderTemplateDD;

  var rsdStringCtrl = pipePanel.grp.group2.rsdString;

  var renderButtonCtrl = pipePanel.grp.group2.renderButton;

  loadPipeCtrl.onClick = function() {}

  rsdPath = GetExtension();

  rsdStringCtrl.text = rsdPath;

  renderTemplateDDCtrl.item [0] = 'yo momma';

  }

  renderButtonCtrl.onClick = function() {}

  rsdStringCtrl.text = 'unloaded project. "

  }

  Default values

  pipePanel.grp.group1.group1_2.renderTemplateDD.selection = 0;

  size of the window

  pipePanel.layout.layout (true);

  pipePanel.grp.minimumSize = pipePanel.grp.size;

  resize panels

  pipePanel.layout.resize ();

  pipePanel.onResizing = pipePanel.onResize = function() {this.layout.resize ()};

  Return pipePanel;     Returns the final result of pipePanel

  }

  var pipeScriptPal = joshPipe_buildUI (thisObj);

  If ((pipeScriptPal! = null) & & (pipeScriptPal instanceof window)) {}

  pipeScriptPal.center ();

  pipeScriptPal.show ();

  }

  }

  joshPipe (this);

  }

  The problem is that want this tool to be a sign that I can anchor. Near as I can tell (using the Extendscript of David Torno series as my guide) I have to read in the user interface and its options initially as a string resource, and I cannot understand how to operate. Any suggestions?

  It dawned on me that I needed to actually get a string with a different function, rather than a table.

  var presetList = ["make model 1', 'make model 2", "make model 3", "make model 4"];

  var presetString = getPresets();

  function getPresets() {}

  list = presetList;

  tempString = "["; ".

  for (var i = 0; i)< list.length;="">

  tempString = tempString.concat("'",list[i],"'");

  If (i<>

  tempString = tempString.concat(",");

  }

  }

  tempString = tempString.concat("]");

  Return tempString;

  }

  ...

  group1_2: group {orientation: 'column', alignment: 'just'------}

  renderTemplateDD: DropDownList {properties: {elements: "+ presetString +"}},

• 5.7 LIGHTROOM question! Panel 'Basic' missing from the Module Development on mac

  I need help! I'm in LIGHTROOM 5.7 and randomly the module 'Base' disappeared under my label to the point, and I'm not able to change the exposure or brightness. I have read several discussions on how to solve this problem and nothing works... someone can you please advise me on the best way to solve this problem? Thank you very much!

  

  Do Windows > panels > base.

• Question of Panel tabs

  I created a panel tabs on one of my pages.  It seems to work correctly in Design view, but when I saw in my browser, the only Panel that works is the (first) top of the page.  Here is a link to the page: www.robertmunozphotography.net/Muse/Places.html.  There should be a slide show in each Panel.

  Any ideas?

  Robert

  I think the juicebox inserted inside the widget gallery could interfere with the Panel in Firefox. I see a bunch of errors related to juicebox.js in the developer console when I load in Firefox, but not in Chrome. Is a panel tabs without the work of juicebox incorporated properly for you in Firefox?

• Satellite A65 - S1070 - question on Panel indicator system

  Hi all

  I wonder what controls the sign... I opened my laptop to clean the dust, put it back together and now none of my lights work. I have to have something out by accident.

  Can someone point me in the right direction as to what this control inside the computer? Can t find in any schema.
  Thank you
  Cindy

  Hello Cindy

  To be honest, you will be very happy if someone has enough know-how to explain how to run again. I hope that you understand now how risky is disassembly procedure without maintenance manuals.

  All I could find is http://www.irisvista.com/tech/. I don't know this will help you, but you can check it out.

• How to get an overview of the effects of the question slide?

  Captivate 5
  Win XPSP3

  
  Problem: how to have an overview of the effects (such as drop shadow) applied to the objects (jpg) on a question slide.

  Situation: Quiz to tell 5 random questions drawn from a pool of 50 questions multiple choice.

  
  Questions pool Panel:
  I'm building the Quizzing question slides workspace.
  I can view the slide and add questions and answers + jpg images that may be necessary.

  If I want to add a shadow to an image, I select the object (img) and place you in the effect controls panel.
  I add a drop shadow and can make adjustments, BUT the effect is not visible on the slide.

  
  The Live Preview button is grayed out and unavailable.

  
  Overview of the toolbar options are...
  F3 slide... Does not show the effect.
  F4 project... would take too long AND would be not safe to view the slide at which I had added the image effect.
  F12 browser... shows the entire project with 5 random questions but not necessarily the specific slide.

  Am I on the Filmstip Panel:
  There are several options preview...
  F8 this slide... If I select a blank Question slide at random, it shoots a question of the pool of 50, but not necessarily that I'm working on.
  F10 then 5 slides... same problem as F8

  Unacceptable workaround solution:
  I can create another pool 'test', containing one question.
  Copy slides edited to "test the pool and the preview with F8 or F10.
  A lot of extra work...

  Then the effect works and would weigh on the finished quiz... BUT... I can't (without a lot of P'ing on) Preview and adjust effects applied to a question slide.

  Someone at - it ideas?

  Concerning

  Frank

  If you want to test the effects on a particular slide of your pool of the Question, and you don't want to publish all slides to see it, just click with the right button on the slide in the question pool and select move Question to > the project main.

  Then, you will be able to preview the effects as with any other slide.  When you know that the slide is over, just get him back in the Question pool.

• General protection fault with tabs and toolbars to the output of the application

  Hello

  It seems that if you have a tab control

  .. .and that tab has a tab with a child Panel control

  .. .and this child Panel has a sign callback function

  .. .and this same child Panel also has a toolbar

  .. .and you do not throw the toolbar when the application closes

  .. .and you do not throw the child Panel when the application closes

  .. .and you do not throw the Panel with the tab control when the application closes

  .. .the application will crash with a general protection fault after the return of the main function.

  Certainly, I consider really cela a bug so as much as there were several things wrong with the code I was working with in order to hit it (and once I set the application everything is fine), but it still took me a little time to track down, so I hope this post can someone put some time in the future.

  I have attached a small sample application that illustrates this problem on my PC in the case where an engineer OR wants to take a peek.  I'm under CVI 2012 SP1 on Windows 7 64 bit.  Thank you.

  I see that I was a little involuted in my previous answer. At Telegraph and hopefully more clear:

  • As indicated in aid, after the chaining of the callback function to the Panel, Panel callbackData should not be modified
  • (solution 1) If you just install a reminder rather than chaining one new this problem is not present
  • I suspect that the instrument of the toolbar handles callbackData parameter Panel. If this is true, you can:
  • Install the toolbar to a panel that does not have a chained reminder (solution 1), or
  • Install the toolbar BEFORE chaining (solution 2) recall: as you can see in the code for ChainPanelCallback, the instrument takes care of callbackData existing and manage correctly in all situations, including the Panel throwing

• DBCA cannot create the database in 12 c in Windows

  Hello

  After the installation of Oracle 12 c on R2 Windows Server 2012 and successfully running the netca command to configure the listener, I run with the DBCA tool question

  It throws an error message of "Recovery Manager could not restore the data files"

  I looked at the log files, here is some information:

  Corrupt block 1 found during the backup piece, reading file=C:\ORACLE\PRODUCT\12.1\DBHOME_1\ASSISTANTS\DBCA\TEMPLATES\SEED_DATABASE. DFB, corr_type = 4

  Review of blocknum = 1, file=C:\ORACLE\PRODUCT\12.1\DBHOME_1\ASSISTANTS\DBCA\TEMPLATES\SEED_DATABASE. DFB, found the same corrupted data

  Not sure if this helps, but I am attaching several log files to help debug the problem.

  I read the post DBCA cannot create the database in 12 c, but it doesn't quite have an answer.

  Any help is appreciated.

  Thank you

  Pranav

  Looks like a bad installation or a bad block on your disk. Have you tried creative using the "Custom Database" model in the wizard dbca (one that does not come with the data files)? It will take more time to create, but shouldn't read the dbca reported as corrupted file

• Oracle.ManagedDataAccess gives ORA-01006 if there is bind variables in the comments, but only on the lines.

  When I go from ODP.NET to the ODP.NET managed some of my questions begins to throw errors missing bind variable.

  I reproduced with a simple example that uses a variable called liaison: unitName

  It's the example SQL:

  SELECT

  : unitName

  Of

  DOUBLE

  Now, if I add a comment at the beginning of the SQL like this:

  -Text with: unitName

  SELECT

  : unitName

  Of

  DOUBLE

  It works, but if I have a variable binding in a comment that is located on a number of the 'same' line, I get ORA-01006:

  This causes the error:

  -First line comment

  -Text with: unitName

  SELECT

  : unitName

  Of

  DOUBLE

  Kind regards

  -Tommy

  I was able to reproduce this problem. I filed Bug 19433348 on your behalf.

  The circumstances in which the bug occurs are fairly easy to get around.

  (1) remove the colon in the second commented line.

  (2) add a space between the '\n' and ' - '.

  If you are one of those things, you won't encounter the bug behavior.

• An inconsistency has been detected in your Interface.

  Hello
  
  I have some interfaces that extracts an Oracle system to a staging of Oracle database (and ultimately to Essbase). I use the LKM SQL for SQL.
  
  The question:
  The interface throws the following exception when opened after changing the context:
  Inconsistency detected
  An inconsistency has been detected in your Interface.  This is probably due to changes in your topology. Please re - save your interface.
  
  In addition, the LKM becomes LKM Oracle for Oracle (DBLINK).
  
  Is there something I am doing wrong?
  
  See you soon

  Probably you created the interface to record and then went to the topology change the context... Besides ODI give this warning. You must open the interface once more and to re-record. LKM Oracle to oracle (DBLINK) is the default value KM for this pair of technology... That is why it is back to the default KM. You can change it to your favorite KM.

  Thank you
  Fati

• I need to download the videos?

  Hi there, Adobe provides enormous resources for us to learn more about Flex, but they forget the people like who uses still a dial-in order to watch these videos. Watch them so are really painful. Where could I download this videos and also the pleasure of learning?

  For those who want to download videos easily:
  1. use Firefox to browse the tutorial page
  2. download the FlashGot extension for firefox ( http://www.flashgot.net/)
  3. If you click on a video it opens in a new window, at the bottom of the player window (low status bar to the right) a small diskette wil icon flashes, this way FlashGot inform you about the downloadable video file (in flv format)

  I propose also nice for work two app:
  1 Bitdownloader (www.orbitdownloader.com)-> FlashGot can transfer the download tasks to this Manager download and this way the downloads mutch more fast (because of the multi thread download)
  2. KMplayer ( http://www.kmplayer.com/forums/showthread.php?t=4094) -> a playet free medai multiplatform and multilingual to view flv files downloaded

  Those who want to download the pdf file, I suggest another Firefox extension:
  Download in format PDF (https://addons.mozilla.org/en-US/firefox/addon/636)-> with this plugin, when you click a pdf file (exatly a link to a pdf file) a question apears Panel, and you can choose to download the file. (his more quickly, that wait for acrobat reader to open them and then use the Save function under)

  Hope this is help for you.

  P.s.:
  Sorry for my bad English

  Kind regards
  Peter

• small misplaced question Panel graphic label color

  Hi all

  I have 2 quick questions, but he could not find in the search, perhaps I was not hitting the right keyword.  Anyway.

  1. How can I move the back label "Interval" to Center and have rest at the centre at any time?

  2. is there a way to programmically change the Panel background color?

  Thank you

  

  If you want to keep this centered label you can use the following:

  

• HP Pavilion p6710f: Question of compatibility before panel connectors

  Hi, I decided to build a new office and reuse my old HP pavilion case. So, my question is whether the connector on the front panel of the case is compatibile with the Panel on my new motherboard header. My motherboard is ASRock B150M Pro4s. Thank you very much for the help.

  There is no list of the pins of the connectors at the level of the consumer.

  I highly recommend that you buy a case of a provider of component PC online or physical store. The case will be delivered with a manual which has a pinout of the connector.

  Once you remove the motherboard from the case of office of HP, you have is no longer a HP PC product.