Question of the ODI - supported databases

Similar Questions

• Ask questions on the ODI agent?

  Hello...
  
  Based on my system, I've created about 50 scenarios and 6 ODI agent. Each of the agent of the ODI is treated approximately 8 scenarios. It comes to my setup for the ODI agent: -.
  
  ODI_INIT_HEAP = 32 m
  ODI_MAX_HEAP = 256 m
  
  Based on my configuration, each agent ODI is then defined as 256 M.
  
  My question is that one better if I use 1/2 agent basically MAX_HEAP or used 6 agent with the above configuration.
  
  Please advise me...
  
  TQ,
  balleur

  Go to the topology.
  Physical architecture open / Agents.
  Open your agent by double-clicking.
  At the bottom left of the window, you will see the Maximum number of sessions. Set this value to 25 (or whatever the number)

  When you submit more runs than that number already parallel execution, then ODI will be automatically queued for execution place in the order of presentation.

  Press on apply. Restart your agent in the operating system. (ODI reads only the settings and schedules at startup. Appendices can be updated at other times perform the "Update calendar" button in the definition of the topology, or when the ODIUpdateAgentSchedule tool is used.)

  Hope this helps

• Questions about the parameters of database using a fast recovery area and the writing of two copies of archived redo logs.

  My databases are 11.2.0.3.7 Enterprise Edition. My OS is AIX 7.1.

  I am to convert databases to use individual zones of rapid recovery and have two questions about what values to assign to database settings related to archived redo logs. This example refers to a database.

  I read that if I specify

  Log_archive_dest_1 =' LOCATION = USE_DB_RECOVERY_FILE_DEST'

  the names of newspapers archived redo written in the default quick recovery area is '% t_%S_%r.dbf '.

  In the past my archived redo logs have been appointed based on the parameter

  log_archive_format='GPAIDT_archive_log_%t_%s_%r.arc'

  I think log_archive_format will be ignored for logs archived redo written in the fast recovery area.

  I am planning to write a second copy of the archived redo logs based on the parameter

  ALTER system set log_archive_dest_2 = ' LOCATION = / t07/admin/GPAIDT/arch.

  If I do this, the copy of logs placed in /t07 will be called '% t_%S_%r.dbf' or 'GPAIDT_archive_log_%t_%s_%r.arc '?

  Before my use of a fast recovery area, I used the OEM 12 c Console to specify settings of backup of database that has been deleted and archived redo logs after 1 backup. Oracle manuals say rather specify a deletion of "none" policy and allow Oracle delete newspapers in the area of fast recovery if necessary. Since I got to keep a second copy of these log files in /t07 should I keep the policy that says to delete logs after 1 backup? If I don't do that, how will they removed from /t07?

  Thank you

  Bill

  If I do this, the copy of logs placed in /t07 will be called '% t_%S_%r.dbf' or 'GPAIDT_archive_log_%t_%s_%r.arc '?

  They will be "GPAIDT_archive_log_%t_%s_%r.arc". LOG_ARCHIVE_FORMAT is only ignored for directories under OMF.

  Since I got to keep a second copy of these log files in /t07 should I keep the policy that says to delete logs after 1 backup? If I don't do that, how will they removed from /t07?

  You can hold the deletion policy as it is. Oracle documentation, defining the STRATEGY of the ARCHIVELOG DELETION: "the deletion of archived newspaper policy applies to logs archive destinations, including the area of fast recovery."

• Question about the Java Support Oracle professional

  We are an ISV in the Japan. We have products of commercial software that runs on the JRE distributed with our applications.
  The JRE bundled with our application include JRockit and, sometimes, our customer of the unannounced JVM dumps core report,.
  asked to perform the diagnosis and the requests for clarification on exactly what part of our application has caused the dump.
  Unfortunately, we don't have expertise in the analysis of the problems of FMV and this is why we are not and we are looking for professional support, that we have.
  
  Our question is whether Oracle offers any type of professional support for ISVS regarding including JRockit Java virtual machines?
  If Oracle does, we would also like to know if we are eligible for the program they have, as we are located in the Japan.
  
  The Oracle Java support, hopefully that's what we need, does not seem to fall into this category, because the details of the support program.
  as we confirmed reading the FAQ document, deals with the named user licenses more and by processor, which were apparently to be purchased by the customer using our product.
  Ask our customer to purchase the subscription just to use our application doesn't seem to be an option.
  
  We would also like to note what our options are and other software companies to tackle the problem even how to manage any relevant question of JVM reported by their customers due to their applications on virtual machines Java runnig.
  
  A few days ago we send the message similar to what precedes to Oracle sales email address, but we did not have all the answers.
  Among the partner sales representative oracle actually told us the Oracle Java SE Support enough that we are concerned, that's why we bought the subscription for 1 year for nothing and now we cannot get a refund from Oracle.
  
  Any response is appreciated, thank you.
  If you are an ISV, please let us know your opinion.
  
  Haruhiko Nishi

  You are asking in the wrong place. This is a user forum. I suggest that you contact your local Oracle Office. Locking this thread.

• Question about the type of database, we create.

  Dear gurus,
  
  We create an application where Back-end is the Oracle 10 g 2 database and UI is Java.
  
  Let me explain what we intend to do on the side of the DB. (Say that the name of our DB is NPS)
  
  1. we intend to have a single database, and it contains 2 diagrams. There is a scheme and any other scheme of Transaction.
  
  The schema of the transaction contains tables and these data tables is filled on a daily basis and this is achieved from a different database (Say NP).
  If the database transaction will get data from the NP. That is to say NP-> NPS (Transaction).
  
  Note: The data can be loaded into our tables in the schema of the Transaction once in the day.
  
  2. we need to show these data to users. This user interface is created using Java.
  Now, we got a lot of users (waiting 600) hitting the daily application, at any time in a day.
  
  So, we plan to go for Reporting scheme. For the schema of the transaction will be just be fetch data from the database.
  
  The Reporting schema contains a few warehouse tables that are there in the scheme of the transaction.
  
  Our notification dashboards should get the data from our data of Transaction so it has to be updated periodically since the schema of the Transaction for any new data that we get from the other database.
  
  Can someone explain to me what is the best way to do it.
  Is there a better approach than what I explained.
  
  Thank you
  Maddy.

  Based on what you have posted, I can make the following observations and recommendations.

  1. 600 users not there. Amazon.com has 300 000. 15 + years I had an Oracle 7.3.4 database with more than 10,000.
  2. nothing you wrote never justifies the second schema that contains duplicate data... there just need to SELECT on the schema of the first privileges.
  3. 10 gr 2 penetrates support mode in just a few months. Why build something today that will be obsolete this summer? Go to 11 GR 2.
  4. learn... materialized views they might have some value according to works of your load.
  5. Java is not a reporting tool. Why not get a writer true Crystal, Business Objects, Oracle BI Publisher, discoverer or Siebel Analytics report?

• Question of the ODI - java.sql.SQLException: unexpected token :) in select [...]

  Hello

  I use ODI 10.1.3.6.10 and get the error message below when a package is run. This package is used to load it please could you help me solve this problem.

  org.apache.bsf.BSFException: exception of Jython:

  Traceback (innermost last):

  "< String >" file, line 24, in there?

  java.sql.SQLException: unexpected token :) in the statement [select...]

  Also, I am getting below the exception in other packaging even though it is running without failure.

  org.apache.bsf.BSFException: exception of Jython:

  Traceback (innermost last):

  "< String >" file, line 2, in there?

  Essbase extract summary data:

  Number of rows processed successfully: 1344

  Number of lines rejected: 0

  Thank you

  Michel K

  Select * from RATES where (1 = 1) and (ACCOUNT = 'RATE')

  (PERIOD and)<=>

  And (YEAR =)

  According to the statement select in the error message above it seems that the filter for the PERIOD and YEAR settings are not correctly and this causes the SQL statement syntax error.

  How is the critria to filter for these fields is the value? that is pre-programmed, through variables etc.

• The U430 supports an SDXC card?

  Hey,.

  I have a small question on my Lenovo U430 touch, with an i7 4500u, Geforce GT 730 M, 128 GB ssd and 8 GB of ram.

  I can't find the answer on the internet, well I'm not sure...

  My u430 has have a 2 in 1 card reader that supported SD and MCC, so in my idea that it would only support the old SD type up to 4 GB. But I can't imange that, it is not logical. so my question:

  The U430 supports a 128 GB SDXC card?

  Dear emeline

  Welcome to the community of lenovo

  Unfortunately, it only supports SD/MMC

  Thank you

  Alaa

• BlackBerry Smartphones MIssion Impossible: How to communicate with anyone on the Blackberry support

  Hi all!

  I have an important question for the BlackBerry support team (is not directly related to a product specific to BB, but related to the support of BB products in general), but it was impossible to contact anyone, somehow, in support of BlackBerry.

  Can someone help me on this mission?

  Thank you

  Ricardo

  RIM does not guarantee other support devices by wireless companies.  So, if you buy from someone and they don't give you a guarantee then you will get probably no guarantee through RIM.   That's the pitfall of equipment from unauthorized dealers.  I am a TMobile customer we.  However, I can't directly call the RIM and get warranty support.  If I want to RIM support I have to pay $50 for the case.  But, if I called TMobile and they can't solve my problem they can escalate my case to RIM without cost to me.

  This is how their system works.

• Ask about the segregation of database access by using the authentication of the os in the windows environment

  Hello

  I have a question about the segragation of database access using authentication of the os (like sqlplus "/ as sysdba") in the windows environment. Let me briefly explain my requirement: -.

  Assume that you have two DBA viz DBA1 and DBA2 and 4 resideds of databases in a windows server say A, B, C and D.Now I want to configure it in a way if DBA1 opens a session on the server then it may connect to the database A and B using only OS and DBA2 authentication can connect to database C and D only use OS authentication.

  Please let me know how to configure for this requirement.

  Version of the database is 11.2.0.3

  Hello

  This doc is 11.1 but I guess it's the same in 11.2 roles on Windows and administering external users

  You create a group ORA_SID_DBA and doing it this way - in recent years I have done but it used to work ok...

  See you soon,.

  Harry

• Question about the ADF Version supported Oracle database

  Hello

  One of my client's situation trigger this thread, they have a few Oracle 9.2.0.6 inherited instance, which turns out to be that a version of database not supported for JDeveloper/ADF 12.1.3, in this case, supports an earlier version of the ADF is the only choice without upgrading of database to 11.x for them?

  And I'm also interested to know why JDeveloper/ADF confined its support to some version of database Oracle, thank you

  -Liang Yi

  Hello

  If I'm not wrong then the Oracle 9i database is out of support since juil.-2007. JDeveloper and ADF certifies and supports the unsupported database versions or operating systems. So I hope that answers the "why". The real solution is to upgrade the database, because that's the reason that will block you for what your client is to move forward.

  Frank

• ODI-14136 Database did not meet the requirement

  Hello everyone,

  I installed Oracle database 12.1.0.2.0 and Oracle Data Integrator 12cR1 (12.1.3.0.0) on windows server 2012 R2.

  I also created databases of odi repository schema.

  Creating master repository, I got this message when the connection test: ODI-14136 Database did not meet the requirement.

  I read on the forum that it is thanks to the version of the database but in Oracle Fusion Middleware Configurations supported system, fmw 12.1.3.0.0 is supported by oracle database + 12.1.0.1.

  Does anyone have an idea?

  Hello guys,.

  I solved a problem by using the remote control to create master and repository work.

  Thanks for your help

• Question about the database to use with ESX and Labmanager

  Hello

  Finally my company is buying a permit for Labmanager and ESX server using Labmanager to our tests.

  We had a question about the database that we use for the actual installation.

  Could we use MY - SQL? Or that we have the olbigation to install a SQL or Oracle DB for the whole system to work?

  We prefer to use MY_SQL because it is open-source and will cost less to use for us.

  Thanks in advance for the answer and please excuse my bad English, I'm french spoke first.

  Lafa91

  Montreal.

  Lab Manager installs SQL Express as part of the installation and use. If you install also Virtual Center as part of your deployment of Lab Manager (do not use an existing VC server), you can use the database SQL Express is included for small installations of ESX, but MY SQL is not an option. You can search the databases supported in the installation guide for what version you deploy.

• Why don't I have easily select my questions open after the connection support?

  Why don't I have easily select my questions open after the connection support?

  When I connect support communities, I have still no clear idea where to find my support questions which remain open to check updates.

  Seems to me that this should be a great, distinct and separate button on the homepage of support after you have connected.  "My open issues Apple Community Support."

  Is this too much to ask?

  Steve

  1. Click / tap your username
  2. Click / tap 'manage subscriptions '.

  

• Just send a question to the support site that I can NOT connect on my email account after auto update of 38.3.0, cannot connect to my account to check the issue!

  I just posted a question on the last update automatic 38.3.0 it is possible to log into different e-mail accounts in a profile, only the first e-mail account. My support mozilla account is linked to one of the email accounts that I can NOT connect to. Can't connect to this email account to check the issue. Your last 38.3.0 Thunderbird is useless because it is no longer possible to log in different e-mail accounts in a profile, and your support solution is useless because you need to connect to the e-mail account to check the issue.
  How to proceed?

  You can change your email associated with your media profile.
  I have 38.3.0 and I can access all my email accounts I suggest you try the initial tests:

  Start T-bird with disabled modules.
  If it works on your module is to blame and you need to activate one by one.

  Start your operating system in safe mode with active network.
  If it works probably your antivirus is blocking or delaying. (Or driver).

• What exactly will happen to the wizard of Frontpage 2000 database during the XP support runs out?

  I have been using the wizard of Frontpage 2000 database to develop a main set of forms that link in my database access 2000 on the side (non-public) back to my site. I realize that the two programs are considered as obsolete, but unfortunately, I can't find a replacement web development software which is what makes the wizard, unless I want to get heavily into the code (kind of like go back).

  I have windows 7 pro and use virtual xp to run frontpage 2000 for my Web site and data-based forms.

  What happens exactly when the XP support runs out? Y at - it a purchase option to continue with the updates, where I am, as it estimated 15 to 30% of the existing Microsoft customers who are always based on the use of XP will be "punished" to explain their desire to stay with a product that has succeeded all too well? (at least for me as far as where this feature goes)

  Ron

  Original title: end of support for XP

  http://Windows.Microsoft.com/en-us/Windows/products/lifecycle

  Care about the lifecycle of Windows

  See also: http://windows.microsoft.com/eos

  What does support mean to you?

  After April 8, 2014, technical support for Windows XP will not be available, including the automatic updates that help protect your PC. If you continue to use Windows XP, your computer may become more vulnerable to viruses and security risks. For more information, see does that mean if my version of Windows is no longer supported?