Question of the workflow

Similar Questions

• Question when the workflow started the same session

  Hello world
  I'm having a weird problem. When I start the workflow for the first time, it is stuck at a certain "Activity A" activity with a status of 'Active'. When I start the workflow from the same session for the second transaction, the first transaction is completed and the other is still stuck in the same activity. It continues when I start the workflow from the same session.
  
  But when I close this session, the last transaction of this session is permanantly stuck to the activity with a status of 'Active'.
  
  When I open another session and submit the first transaction, once again the same pattern repeats itself.
  
  
  The code of the activity where it gets stuck is:
  PROCEDURE PROCESS_REQUEST_SUBMIT (itemtype in varchar2,
  ItemKey in varchar2,
  actid number,
  funcmode in varchar2,
  Out out result NOCOPY varchar2)
  IS
  l_sundry_listing_number varchar2 (30);
  number of l_approval_sequence;
  l_action_by varchar2 (240);
  l_count number;
  BEGIN
  
  
  
  l_sundry_listing_number: = wf_engine.getitemattrtext(itemtype,itemkey,'TRANSACTION_ID');
  
  Select count (*) in the XXCED_SUNDRY_WF_ACTION_HIST l_count
  where sundry_listing_number = l_sundry_listing_number;
  
  If l_count = 0 then
  l_approval_sequence: = 0;
  on the other
  Select max (approval_sequence) in the l_approval_sequence of XXCED_SUNDRY_WF_ACTION_HIST
  where sundry_listing_number = l_sundry_listing_number;
  l_approval_sequence: = l_approval_sequence + 1;
  end if;
  
  l_action_by: = wf_engine.getitemattrtext(itemtype,itemkey,'REQUESTOR_NAME');
  
  INSERT INTO XXCED_SUNDRY_WF_ACTION_HIST
  (SUNDRY_LISTING_NUMBER,
  APPROVAL_SEQUENCE,
  ACTION_BY,
  ACTION,
  ACTION_DATE
  )
  VALUES
  (l_sundry_listing_number,
  l_approval_sequence,
  l_action_by,
  "Submit."
  TO_CHAR (sysdate, "DD-MON-YY HH24:MI:SS)
  );
  
  COMMIT;
  
  
  
  END PROCESS_REQUEST_SUBMIT;
  
  
  Can someone help me with this problem please?
  
  
  Thank you
  Rambeau

  Hello

  So that the workflow must be started correctly, something MUST validate the transaction - be it in your procedure that starts the workflow, or anything that calls this procedure. If there is no commit, then when the session disconnects, it restores the workflow.

  So, try

  begin
  XXCED_APWFL006_SUNDRYAPPR_PKG.Initiate_Workflow(transaction_id=>'SUNDRY-0001',
  requestor=>'AMBALAR');
  COMMIT;
  end; 
  

  SQL * more and see what the results are. If it works, the problem is within your call to call the workflow without a validation process.

  Matt

  Published by: Darryl Burke - advertising and deleted links

• A few questions about the workflow with the window Code and Actions Panel

  If I have the window of open Code and want to add a new action to an element (by right-clicking and choosing "open stock...) "), the program is not responding. I have to close the Code window to open the Actions Panel. Then add the Action and then close the control panel and reopen the window code. It's not a way I can see to have Actions open and open at the same time.

  Actions is not yet considered as a 'window' that it cannot be opened in this menu drop-down. It floats also only - you cannot dock anywhere.

  I know that you can click on the small icon to the right of the name of the item in the properties panel for "open stock". But that only works once. Say that I have added a click to an element using this icon event, but then, I also want to add a mouseout/mouseouthandler() event. If I click on this icon, once again the Panel is described in orange but nothing happens.

  It is slow me down having to open and close windows whenever I have add a new action. Am I missing something? Is there a secret character that I'm supposed to use to add an action without having to use the Actions window. I prefer open the Code panel so I can easily hope around the code for different elements. This division between the Action and the Code is intuitive and . ineffective

  If you want to use the window Code, no need to jump on stock {} icon or use ' shares open dethrone ' command, just keep the Code window opens, make a click right then don't use the icon to the right of the symbol or element you want to apply an action to - see + captures. When you click on the + follow the special action string. This way you can add several 'Actions' without having to close the Code window.

  

  Regarding the by clicking on the icon {} when the Code window is already open, like a time thing - good observation. You will need to use the above + process to add successive events.

  Darrell

• Two questions about the color of Lumetri (workspace color)

  The first question:

  Let´s I have three clips on the timeline, left to right, A clip, clip B and C clip. If I place the CTI to clip B and then move on to working color space that I can easily do magic with color Lumetri in the Lumetri color Panel. But, if I decide now that the adjustments I made to clip B would be great to use for the C clip, is there a way to simply click a button or assign a keyboard shortcut that auto-magiquement copy the clip B to the C clip settings? (the clip B to clamp A (or) It would speed up the workflow much.

  Yes, I know that I can copy/paste from the effect options, but given that the Lumetri color Panel is right and options effect is extreme left would be great avoid using the mouse too. Avid Media Composer has this function is very convenient. I guess that Final Cut Pro 7 did not have it. If she had been in Premiere Pro...

  The second question:

  Is there a way to alternate the color of Lumetri power of in Lumetri color instead of the effect controls panel? Yet once, too much mousing for such a task simple. If I select the color of Lumetri in effect options I can use the hotkey "effect on" to toggle color Lumetri or not, but this same shortcut does not work in Lumetri Panel which is odd color.

  Any help is appreciated!

  1. Unfortunately, no.  It's just one of the many features that we had in SpeedGrade have not yet in PP, Adobe decision taken to kill premature Direct relationship.

  2. Fortunately, Yes.  There's a shortcut not assigned for this.  I use the 0, the default key in SpeedGrade.

• Feature: Get last question in the Specs of explicit master

  On v6114.  I have install a demo of explicit specification of master to the specifications of the packaging material and get the last number (unlocked) doesn't seem to work as expected.

  Our conditions were:

  1. the package has been approved.

  2 Master specification 500000-001 has been approved.

  3. direct explicit related specifications with getting last question icon in the UNLOCKED position.

  4 created a new edition of the Master Spec 500000-002 with replaced 500000 prerequisite-001

  5 a. approved the new number of Master Spec 500000-002.

  6 proposed old master Spec 500000-001 to Inactive.

  7. returned to the Packaging Material.

  8 expected related Master Spec 500000-001 to be replaced by the new show 500000-002 and it wasn't.

  Our expection of the behavior of the system is unrealistic?

  If our hope is realistic, is there a condition that we have neglected to get the behavior we want?

  Thank you.

  That should work. Please make sure you have the workflow is approved tag assigned to the technical mastery of the approved workflow stage.

• Is it possible to archive similar sourcing approvals of how GSM specifications can be masked by the tag spec hidden in the workflow

  We would like a way to hide the sourcing of the approvals that have reached a specific State of the workflow.

  Similar to the way it is done in GSM.

  Is it possible in one of the new versions?

  
  

  Basically you create a tag from visibility in ADMN, tag approved sourcing or statutes of specification in the WFA, then associate tags with user groups in the UGM.   If you can do things like, only R & D can see sheet formulation in 'project' and 'revision', so that everyone can see formulations in 'approved '.    This feature gives you more options that just the GSM hide spec unique tag.   Its really the feature 'Hide Spec' next generation.

  You can create a tag called "Hide SA" and then associate this tag to archived step sourcing of approval in the WFA.   Once labeled only users in a group associated with the tag "Hide SA" can see these approvals sourcing.

  We have a white paper which should help explain how to set tags visibility upwards.  Check it out here:

  http://docs.Oracle.com/CD/E29563_13/OTN/PDF/whitepapers/E29319_01.PDF

  Let me know if you have any questions.

• Questions of the aggregator

  I'm desperate charges aggregate but having problems.  My last one is that I saved a project like SWF and that he did not understand the HTML 5.  the thought that as aggregator saw the file OK did, I get this error

  Sorry, it's so hard to read.  Point is, he says it isn't an Adobe AS3 file.  What is c?  Since I did it with Cap; tive, it would make sense that Captivate should be able to read.

  They are very old Captivate published of the SWF? Before 5, AS2 was often used. But your other similar question, in my view, that you have problems with the workflow to create an aggregator project.

  Normal workflow for the aggregator is:

  • publish the Captivate SWF files, you only need the SWF itself
  • Click on the + button in the aggregator and point to a SWF file
  • continue to do this second step
  • indicate the SWF file to use as the master movie, its parameters for TOC will be used
  • Finally, you can override the info by using the Info button
  • Save the aggregator project, the extension will be aggr
  • check publish settings (important if you need do a right-click feature, default accessibility is turned on)
  • Publish it

• Question about the capture in ProRes 422 HQ

  Hi, I hope that you´re having a great Easter!

  I m a fresh technical coordinator on an award show and do some research on this workflow we want to use for the project.

  As part of the we´re to see the creation of the comedy bits and other small videos for breaking the live broadcast, and I have to take a decision on what format we want in the shooting.

  We´re using first and to facilitate the workflow, I thought ProRes would be a good choice for the capture format. As much as we´re is not a large amount of shooting sequences. For this reason, I think that the shooting in 422 HQ is viable.

  However, I Don t currently have information about the use of we´re cameras, so here are my questions:

  It is common for the cameras to support ProRes capture more precisely 422 HQ?

  Which cameras support it?

  Are all memory cards capable of storing 422 HQ?

  Do you have the experience of working with a workflow of 422 HQ on smaller projects or possibly more? Disadvantages?

  
  

  
  Thanks for your time!

  EDIT: This is the right place for this question? If not, please direct me to a more appropriate forum. Thank you!

  Many high-end cameras are supported the record in ProRes format. If you find yourself using cameras do not record ProRes then you could always tie a convergent, or external such as Atomos products recorder which allows to record any flavor of ProRes to an SSD. Here is a list of Apple authorized products that support ProRes: https://support.apple.com/en-us/HT200321

  I don't know that is how updated, but given that the gun RED 8 K is about, it seems quite common. The list shows NLE, video cameras, and recorders, so it should give you a good start.

  The memory card or the SSD just need to be fast enough to support written bitrate of 422 HQ. Any SSDS should do, if you go with an external recorder. If you go with one of the cameras that uses a memory card, manuals and manufacturers can tell you recommended specs.

  I have experience with ProRes 422, no HQ, but if you have a fast enough machine, it should be quite pleasant to work with. The obvious disadvantages I can think would be needs of storage and bandwidth between your storage and your machine, especially if you go with a multi-cam project. A single stream or two of ProRes 422 HQ should read through any modern storage, high-speed.

• Question of the multi-state object

  Hello again,

  I would like to have the text window appear only on the click of a button.

  What I have to use a tip for this action or can I simply use a multistate object that I switch?

  If so, how to create an invisible State standard for only the second State as the visible box/picture I want to show?

  Am I missing something?

  Thanks for any help!

  I have to leave now for a meeting, will be back in a few hours.

  You can post a screenshot of the status display? And I would prefer to use ' change the State of... "to be very precise. Did you really follow the workflow, I explained to him? I always double check before answering a question.

  Here are some reading, I used multistates:

  1 share = 5 buttons toggle - Captivate blog

• Entry of workflow change during execution of the workflow

  Hi all

  I've created a workflow to deploy a virtual machine for one of my clients. The workflow deploy a VM from a model, connect the network adapter to a DVportgroup, run sysprep, if necessary, add the disk if necessary, change the ram if necessary, change CPU if necessary and install a lot of software for virtual machine complies with the customer's environment.

  During the deployment, if the user you can add a disk to its virtual machines, it needs answer a simple question and enter the size of the disk. The format (thick or thin) is automatically selected as per their standard.

  My workflow is running, and works well, but they want to add an option for a number of disk. Let's say a user want to add three disks! I have add this fields: how many disks to add? And put the answer in a variable number. I added a counter after the workflow add drive as you can see in the image below.

  

  When the counter reaches the number of drive the user wants, it will go to the next steps.

  This work but always create the disk with the same variable in size, so all the disks are the same size! It's not very practical!

  I want to know what is the best way to have a size for every reader to create variable? The number will never be the same. Let's say I want to add 3 disks, one of 250 GB, 300 GB and 350 GB. I want my user to enter 3 variable sizes.

  I guess I'll have to ask my user to enter different size separated by a; or, in the code to read these numbers. This will be stored in a variable. But is there any other way?

  Thank you for taking the time to read and help!

  You can ask for how many records you wish to have, then depending on the response, calls for each drive size. Once you have variables that you can update your loop for adding disks to use the correct size for each drive. Not terribly complex turns and it provides for the entry of more pleasant for the user to define the sizes with semicolons, commas or whatever.

  Take the drive entries size and put them in a table. In this way, when you add for each drive, the index must be for each drive... for example:

  Entries:

  driveCount (number)

  driveSize1 (number)

  driveSize2 (number)

  driveSize3 (number)

  // Create array to store drive size inputs
  var drives = new Array();
  // Only store drive size if it has been defined. I went simple, from the top of my head here and chose > 0 to determine..
  if (driveSize1 > 0) drives.push(driveSize1);
  if (driveSize2 > 0) drives.push(driveSize2);
  if (driveSize3 > 0) drives.push(driveSize3);
  

  ... now, you have to browse loop to add your readers:

  before your disk subworkflow added, put in a scriptable job that sets the current disk size:

  something along the lines of:

  var diskSize = drives[loopCounter];
  

• Timer standby and resumption of the workflow problem.

  Has anyone ran this question before, and if so, how do solve you?

  I have a fairly simple workflow that I use in my Sleep function in my workflow:

  

  'Set date' just creates a date object that is waiting specified seconds time in the future, then called "Pending timer" by that date.

  It seems to work great, workflows suspended as they should, reducing the load on the server so that its waiting for the next thing to do.

  However, if the server is restarted and workflows resume later never seems to trigger the "timer on hold". I guess it's because while he has to wait for is in fact in the past.

  Anyone know of a way to solve this problem or a better way of suspending the workflow without using System.sleep ()?

  OK, so it seems that this is a problem with 5.1.0 build 2725. I don't know how it was fixed, but it works in 5.5.1 build 1617127.

  The question is that "Hold timer" does not throw an exception if the date he expects in the past in 5.5.1 it does.

  I changed the flow of work to properly handle the case where the vCO server is restarted while the timer standby is suspended.

  

• Create the Scheduler in the workflow

  Hi all

  I question even once, I try to create workflows for the provision of the vm... The provision of vm for the test environment for the virtual machine would have expired time... Let's say that my request of the VM user with a week time out time, I want to create clone vm workflow who have the ability to set the VM to suspend the State until the user send the time extend confirmation but if not the virtual machine will automatically be deleted. Is it possible to create the Planner like this?... Thanks for the suggestion

  For a quick/simple implementation, the following could be done:

  create a workflow to "Deploy new VM" which returns a 'VC:VirtualMachine' object - it could be something simple as one of the Clone with the customization of the library packaging workflows.

  Then, create the user workflows, for example "available with Timeout and Decom":

  

  After you have created the virtual machine, use a scriptable for calculation date task to set the retirement date. Pass this date, e-mail of the user and the virtual computer object in the element of regular workflow at the end of the workflow. When you are prompted for the workflow to run when you put the "Annex Workflow" element on the diagram, you will need to have your ready 'Delete VM' workflow.

  The workflow to delete VM should look approximately like this:

  

  When the workflow runs through the scheduled task created in the workflow of the provision, it will be:

  1. E-mail address of the user specified for the workflow of provision of interaction
  2. Sets a timeout for the user to answer
  3. (possibly set a time-out on the user interaction (shown with red dotted lines) Re-send the e-mail message)
  4. Interaction with the user prompt user if they wish to extend
  5. If so, set a new date of decommissioning and schedule the task to run the workflow delete VM on this date
  6. If not, use the workflow Library to 'delete virtual machine '.

  Above is a quick mock-up and dirty of what this solution pourrait look like. When something like that put into production, a lot of things happen and should be considered. These things can vary from environment to environment. Good luck.

  I must emphasize that vCloud Automation Center has integrated similar functionality and includes even a portal facing the user.

• Get the workflow parameter value before the end of the SOAP client workflow execution

  I'm calling webservices SOAP Orchestrator of my request to run a workflow. I want to get a parameter/attribute value before execution of the workflow.

  Brief:

  I have a XYZ workflow that adds two numbers provided by my application. After that my workflow perform some other features that say 5 minutes.

  My application is the result of the addition from the addition is performed. I don't want to wait for these 5 minutes to finish after what my worlkflow is finished and then obtain the result.

  Hello DeepakPN - first of all, if you use vCO 5.x, we strongly recommend to use the api instead of the old api SOAP REST.

  Now, to answer your question:

  When you run a workflow, the returned soap body includes a return workflow id: this is your workflow token id - essentially the Runspace of your workflow. He looks a bit like this:

  
     
        
           
              ff80808141e74b090141f05c5d2c00f7
  

  There are several additional lines less than retail, but I left it as an important component of the info here is this tag . The value that it contained should be used with the operation "getWorkflowTokenForId". By providing this ID and your credentials, the resulting SOAP body will contain details of your performance at the time of your request. So, if you have your amount stored as an attribute at the time that you run the query, you will see the results. For my simple test, here is my operation "getWorkflowTokenForId" for a test flow that I came through SOAP:

  
     
        
           
              ff80808141e74b090141f05c5d2c00f7
              
              1a568e2e-5c15-4b68-9bab-20cb955f0004
              item0
              completed
              completed
              
              20131025120447-0400
              20131025120447-0400
              
  
  
  >
  >
  
  
  
  ]]>
           
        
     
  
  

  Inside the tag, there is a tag that contains each of my entries/attributes. In the code above, 'anyInput' is the input parameter for my workflow and of the "inputTypeName" as an attribute.

  Hope this helps

• Any way to further customize the workflow notifications?

  Hey all,.

  I received this question MANY of my clients of BC, so I thought I would check with the BC community. Is it possible to further customize the workflow notifications?

  I know that in e-mail notification of workflow by default, webform submissions appear using {tag_formsummary}. This works well for the average contact form, but for more complex presentations (I have clients using Web forms for online employment applications and detailed quote requests), it would be great to be able to organize shipments of form in a way to make it a little more readable.

  I know that it comes a bit out-there, but I had this conversation enough times with customers frustrated that I thought I'd ask!

  Thanks in advance!

  Angela

  1. you have the workflow notification email presentation you can change, but as you note form results itself at the moment you cannot edit.

  2. with the new rendering engine and the liquid, you can run a collection on the results of the form online and customize the output for the site, but not emails

  3. the order of the fields of a form in the effects of the admin what things like form results go out.

  4. SOME limited CSS of substitutions for SOME email clients may be made on form results

  Not much. And you probably already read it making your digging as you did. Other then the site stuff you can do, nothing has changed in terms of what you can do with e-mail.

• Errors of the owner of the workflow for AD ldap

  Hello

  I have questions, respond to user interaction. Logged on as a user that should have all the rights on the workflow (but not in the group admin vco). The user can start a workflow to create a machine, but not in response to the intervention of the user (for approval). Error in the logs are:

  03:25:33.889 2012-02-06 + rights access 0000 [DefaultVerifier] ERROR Checker met a guy recognized, while checking the owner of the item: ch.dunes.model.workflow.WorkflowInputContent of the class
  2012-02-06 + 0000 ERROR [DefaultVerifier] 03:25:33.890 can not check the owner of the object, because no user is associated with the object
  03:25:33.890 2012-02-06 + 0000 ERROR [DefaultVerifier], personal of the current user is not the owner of the object (WorkflowInputContent, AC80808080808080808080808

  If I try to 'reply' in the vco client, I get a NullPointerException that triggers the foregoing.

  Any help would be appreciated.

  See you soon

  Hello

  Unfortunately, this is called the bug, which attaches to the vCO 4.2.1 device, which should be published mid-March.