Errors of the owner of the workflow for AD ldap

Similar Questions

• Access error in the workflow area TabContext

  I'm working on an ADF application that acts essentially as an IDE.  There is a page main jspx with a tree in a left navigation pane, then publishers (fragments) are displayed in tabs in the central content pane.

  One of my pages is a dashboard and it contains several areas of Panel who have things like "Recently opened", "Recently published", etc.  Each box is it is a clean area with it's own Fragment.  They usually contain a list of the command.  I use the feature "Recently opened" illustrate the problem I have.

  When I opened a new editor, I add it to a list in the grain of support.  The fragment in the region recently opened uses a tag af:forEach to iterate over this list and show the links of the command.  When you click on it, the link to order access this tab (if it is open), or open a new tab with this editor (be it was closed because it was added to the list).  The problem is when I try to access the TabContext, I see two scenarios.

  In scenario 1, show the links of the command, but I get a Null pointer by accessing the context tab.  After seeing this in the past, in scenario 2 I added a parameter to the workflow for tabContext and got a new error.

  Error of scenario 2: < MISSING_REQUIRED_PARAMETER > < /WEB-INF/flows/recentlyOpenedFlow.xml#recentlyOpenedFlow > tabContext

  Example code below:

  faces-config. XML

  < managed-bean >

  main_dashboard < managed-bean-name > < / managed-bean-name >

  < managed-bean-class >... MainDashboard < / managed-bean-class >

  session of < managed-bean-scope > < / managed-bean-scope >

  < / managed-bean >

  < managed-bean >

  recently_opened < managed-bean-name > < / managed-bean-name >

  < managed-bean-class >... RecentlyOpened < / managed-bean-class >

  session of < managed-bean-scope > < / managed-bean-scope >

  < / managed-bean >

  < managed-bean >

  tabmanagement < managed-bean-name > < / managed-bean-name >

  < managed-bean-class >... TabManagement < / managed-bean-class >

  session of < managed-bean-scope > < / managed-bean-scope >

  < / managed-bean >

  main_dashboard. JSFF

  < af:panelDashboard id = columns = "#{main_dashboard.columnCount"mainDash"}" rowHeight = styleClass "250px" = "AFStretchWidth" inlineStyle = "height: 1000px;" "

  dropListener = "#{main_dashboard.handleReorder}" binding = "#{main_dashboard.panelDashboard}" > "

  < af:forEach items = "#{main_dashboard.dashboardItems}" var = "panels" > "

  < af:panelBox text = "#{panels.localizedTitle}" >

  < af:region value = "#{panels.regionTaskFlow}" / >

  < af:componentDragSource / >

  < / af:panelBox >

  < / af:forEach >

  < / af:panelDashboard >

  main_dashboardPageDef.XML

  " < pageDefinition xmlns =" http://xmlns.Oracle.com/ADFM/uimodel "version ="11.1.2.64.36"id ="main_dashboardPageDef" "

  Package = "fragments" >

  < Settings / >

  <>executables

  < variableIterator id = "variables" / >

  < taskFlow id = "recentlyOpenedFlow1" taskFlowId = "/ WEB-INF/flow/recentlyOpenedFlow.xml #recentlyOpenedFlow"

  " activation ="deferred"xmlns =" http://xmlns.Oracle.com/ADF/controller/binding "/ > "

  "< taskFlow id ="recentlyEditedFlow1"taskFlowId="/WEB-INF/flows/recentlyEditedFlow.xml#recentlyEditedFlow ".

  " activation ="deferred"xmlns =" http://xmlns.Oracle.com/ADF/controller/binding "/ > "

  < / executables >

  < bindings / >

  < / pageDefinition >

  recentlyOpenedFlow.xml

  " < adfc-config xmlns =" http://xmlns.Oracle.com/ADF/controller "version ="1.2"> "

  < - flow - the definition of task id = "recentlyOpenedFlow" >

  activity < default > recently_opened < / default activity >

  <! - this parameter does not exist in scenario 1, but the causes of the LACK of REQUIRED PARAMETER error in scenario 2 - >

  < Input-definition-parameter id = "__8" >

  < name > tabContext < / name >

  < value > #{pageFlowScope.tabContext} < / value >

  oracle.ui.pattern.dynamicShell.TabContext < class > < / class >

  < required / >

  < / Input-parameter-definition >

  < managed-bean id = "__1" >

  tabManagement < managed-bean-name > < / managed-bean-name >

  < managed-bean-class >... TabManagement < / managed-bean-class >

  pageFlow < managed-bean-scope > < / managed-bean-scope >

  < / managed-bean >

  < id view = "recently_opened" >

  < page > /portlets/recently_opened.jsff< / print this page >

  < / view >

  < use-page-fragments / >

  < visibility / >

  < / task-flow-definition >

  < / adfc-config >

  recently_opened. JSFF

  " < = xmlns:jsp jsp:root ' http://Java.Sun.com/JSP/page "version ="2.1"xmlns:af =" " http://xmlns.Oracle.com/ADF/faces/rich "" "

            xmlns:f=" http://Java.Sun.com/JSF/core ">

  < af:panelStretchLayout id = "PSL1" styleClass = "AFStretchWidth" >

  < f: facet name = "center" >

  < af:panelGroupLayout layout = "scroll" id = "pgl4" >

  < af:forEach var = "item" items = "#{recently_opened.openedCommandLinks}" >

  < af:commandLink text = "#{item.text}" partialSubmit = 'true' "

  actionListener = "#{recently_opened.editorFiredFromDashboard}" / >

  < / af:forEach >

  < / af:panelGroupLayout >

  < / f: facet >

  < / af:panelStretchLayout >

  < / jsp:root >

  RecentlyOpened.java

  {} public void editorFiredFromDashboard (ActionEvent event)

  Link RichCommandLink = event.getComponent ((RichCommandLink));

  TabManagement tabMgmt = (TabManagement) SessionHelperUtl.getSessionBean ('tabmanagement');

  RichTree mainTree = (RichTree) SessionHelperUtl.getSessionBean ("maintree");

  String linkId = link.getText ();

  Map < String, Object > params = new HashMap < String, Object > ();

  params.put ('closing', true);

  params.put ("recentlyOpenedItems", getRecentlyOpenedItems());

  tabMgmt.launchEditor (params, (TreeItem) getRecentlyOpenedItems () .get (linkId), mainTree);

  }

  TabManagement.java (_launchActivity is called by launchEditor)

  ' private void _launchActivity (String title, String taskflowId, boolean newTab, map < String, Object > params) {}

  try {}

  tabContext = TabContext.getCurrentInstance ();

  The tabs list < Tab > = tabContext.getTabs (); / / Null pointer in scenario 1 goes here

  Hi Scott,.

  Looks like you're missing to set the task input stream parameter tabContext to the recentlyOpenedFlow on the page of main_dashboard binding.

  When you open the main_dashboard page, click the links tab, click the recentlyOpenedFlow in the executables section, you will see the input parameters are listed.

  You can set the value with the tabContext of calling traffic there. However I'm no expert on the boss of Shell of the user interface, so I don't know if the tabContext is serializable parameters need to be as far as I know.

  Otherwise, the record output will let you know...

  Achim

• Error in the printer for 16-bit application that runs in Windows7 32 error "caused a floating point exception in hpcui121.dll to 0x5b39caea.

  Original title: Error in the printer for 16-bit application that is running in Windows7 32

  I have a 16-bit application. I'm running Windows 7 32. All of a sudden, I can't print my application. I have two messages: "caused a floating point exception in hpcui121.dll in 0x5b39caea" and "caused an access violation in WOW32. DLL to 0x6dc50421. Any help to solve the problem would be greatly appreciated.

  Hello

  Have you tried the methods suggested in my previous post dated August 29?

  Response to help you further.

• Msg of error in the workflow after patched to 11.1.2.1.600

  Hello!
  
  We recently patched to 11.1.2.1.600 for our planning solution and we get an error msg in the workflow.
  
  If the "hierarchy of planning unit" is configured as 'Free form', we get an error message if users open "Manage trusts", select "Details" of a planning unit and then '' change of status. '' The message error is "is there no valid action that can be performed on the selected planning units. If the "hierarchy of planning unit' is defined as 'Bottom up', it works fine.
  
  Everyone know this behavior in the 11.1.2.1.600 - patch? Is there a solution?
  
  An SR is also raised to Oracle, so I hope we get a response from them soon.
  
  Grateful for answers!
  
  ARO
  Martin

  Its a known behavior dans.600. Change the PHU 'Free form' type to 'Bottom-up '.

  See you soon... !!
  Rahul S.

  Published by: Renu on November 27, 2012 15:56

• Check the workflow for 11.5.8

  Hello
  
  We need to know if there any way to validate the workflow (working or not) without using the Application on Oracle Financials 11i Manager (11.5.8).
  
  Our instance of Test OAM is not working properly because there is a JSP error. But we need to test the functionality of workflow for the approval of bills.
  
  At the moment we do not have the functionality of workflow in production, that it is the first time, it must be tested.
  
  Thank you!

  Hello

  Please refer to this document.

  Note: 378281.1 - How does one check that the sender of the Notification does not work properly?
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=378281.1

  Kind regards
  Hussein

• Configuration of the workflow for the warehouse does not work

  Hello
  I m trying to create a workflow for a data warehouse, but for that I need to set it up.
  When you go to the Workflow Configuration Wizard, it does not work. any idea?

  Be a little more specific. What is the error you get?

• Need help with the error of the EFS for SBS 2008

  I get the following for encryption: "year error occurred applying attributes to the file", then "strategy of recovery configured for this system contains an invalid recovery certificate" for encryption on SBS 2008.  Server doesn't let me encrypt on our network.  Our certificate on the server says it is valid and run cipher/r does not solve our problem.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• error in the search for driver updates.

  I did a self diagnostic computer and he felt that the 6TO4 card has a 'configuration problem preventing it from properly start"," maybe he have good driver or may be affected by a hardware failure. "The Plug and Play ID for the device is 13" there was another driver that does not leave too, "Plug and Play #is ROOT\ * 6T04MP\0000» I am also including the information that I found on the driver #' s: pilot 6TO4 adapter c:\windows\system32\DRIVERS\tunnel.sys-driver version: 6.0.6000.16386 file version: 6.0.6001.1800(longhorn_rtm.080118-1840). I also found, "this device cannot start code 10.", "Windows finds drivers software for your device but encountered an error trying to install it.". He also told me that Sigmatel C-major also had information about this but I have not checked who yet because I found on a part of the device manager that all the updates had been installed. I went to Windows Update to make sure that all my options have been exhausted and found: "Windows could not search for new updates and error occurred when searching for new updates to your information. Error found Code 80070490. Windows Update has encountered an unknown error. ». He also told me to ask for help, so here I am, I have not install no matter what material I have downloaded a few security programs and what not, I'm too hip on Windows automatic updates I am too a novice not I don't (yet) know it as the computer and does not need, so I left it on automatic from the start. I have clkd on the diagnosis of the problem and the solution to go home, which is what you see above, I tried to clk on install updates, but the computer says all updates are installed, but the driver does not always work. I've had the computer for less than a year (my first one), but I had no real problems with it other than what I've caused by my own ignorance. If I had not run that diagnosis I wouldn't have known I had a problem with the driver, but it is obvious to me that if the computer will function even though all aspects of it should work. I only know about it for about a week, I had other things to do and I can do without this driver does not work, but I want it fixed too. So what do I do about it? Thank you for all that help you can provide.

  Hello dumdeedumdum,
   
  a. you have problems with the network for not being able to update the driver?

  b. What is the operating system installed on your computer?

  The best way to fix this would be to go to the computer or the device Manufacturers Web site' and download the updated driver.

  Do not scan the computer for the update of the driver.
   
  If all your devices and the network works well, you can skip this update. Microsoft has confirmed that it is a problem in the Microsoft products listed in the section "apply to".
   
  If you have a Vista-based computer, you can consult this article:
   
  http://support.Microsoft.com/kb/932520/en-us

  I hope that the information above helps you.
   
  Kind regards
  Manasa P - Microsoft technical support.

• The new XP installation error. The signature for the family Windows XP Setup is not valid. The error code is fffffc0d

  I'm doing a fresh install of Windows XP Edition family on a new hard drive.  I get the same error message indicating that the product catalog can not be installed. I reformatted and retryed with the same result. I tried a different HARD disk, but got the same trouble. I also tried installing XP Pro after a reformat and got the same error. The first error window says "the signature for the family Windows XP Setup is not valid. The error code is fffffc0d", and the second says" error: the system cannot find message for message number 0xfffffc0d text in the file for syssetup.dll fatal error messages: Setup failed to install the product catalogs. " Any directive or ideas would be greatly appreciated. THX

  Hello

  I suggest you try the steps from the link below and check if it helps.

  http://support.Microsoft.com/kb/307153

  Hope this information is useful.

• Error "Unloading the box" for the download of victory 8

  I had a problem after another trying to get the 8 upgrade win.  First of all, even if Microsoft has validated my record ID, I could never get to the stage for the upgrade.  Instead, I was taken into a page to pay full for win 8 or Win 8 Pro.  I spend about an hour last night with Microsoft technical support.  No one could discover the problem.  Finally, I agreed to buy the product at full price and take out a loan for the total.  Now when I access my account at Microsoftstore.com, I have all the information on the order.  But when I start the download process I get this message when running the executable: unloading of the box.  An error has occurred.  Unspecificed error.  OK

  I did a complete restore of the system several days ago and then added all the updates on the computer that I use to download.  He has Win XP with SP3 installed and no AV installed (fear that it interferes with the download).  (I got the upgrade with the purchase of a Win 7 machine this last fall and to install the upgrade on the XP machine for now.)

  Updates, that I initiated on two other computers have finished without any problem, so I feel comfortable with the process.  However, the third effort seems to be missing the "charm" of the first two.

  Thank you for your help.

  This change solved my problem.  I found the information after a search on the web.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/problem-initiating-Windows-8-Upgrade-Assistant/a81a2b80-F032-46EC-a0e6-4512aa8bcbf4?page=3

  The problem seems to be that a service (Terminal Services) under Win XP does not start when necessary as part of the download process.

  Go to my computer. Right click and choose manage. Choose Services | Highlight the Server Terminal Services | Right click and choose Properties.

  Change the manual setting to automatic.  (Note that on the site, some users choose a different setting, but auto allows the service to run at startup.)  Close and restart the computer.

  I hope it's useful to others.

• Do "request failed: ' error after the workflow run 'assign a state change.

  I try to start a workflow that sends an email once a machine is put into operation.  A simple task, I think.

  I have installation vRA and vRO and am able to supply machines form vRA before making further changes.

  In vRO, I ran the workflow of customization of the vCO 'Install', and the workflow "to assign a workflow of change of State of a master plan and its virtual machines.  After you run the last workflow, I get the error "'request failed: not found YUNoWork and perhaps even deleted before commissioning end." when you try to configure a machine to. "

  The workflow of messaging works on its own, and after the execution of the workflow «Assign a state change...» ", I see not updated the property of 'WFStubBuildingMachine' on the action plan.

  Any comments would be greatly appreciated!

  The issue was that endpoint vRO was not added to the vRA.  After you add endpoint and the taking of the inventory, the problem has been resolved.

• 91 error to the database for data Variant

  Hello

  This issue was raised after that I "solved" this problem earlier today: http://forums.ni.com/ni/board/message?board.id=170&thread.id=446931

  Now, I get the above error message on all functions 'DB retrieves the element '...

  

  I have the polymorphic option off - as I have it set to automatic...  The stored procedure in the above case is trying to choose a 0 or a 1, Boolean values ala.  However, this is not the only point of failure.  Actually, I get this error on each item to search, using 4 data types: Boolean, String, I32 and DBL...

  

  Can you see what I'm doing wrong?  I spose I'll upload my VI, but you will not necessarily be able to see the data of my STORED procedure is back...

  Thank you!

  Dave

  OK, this problem occurred because the stored procedure has been throwing up on my settings input parameter, unbenouced for me until I entered the code...

  The reason why I was getting this error was that I believe because I was getting a NULL Recordset...

  After that, I fixed my problem of input parameter, this large all worked.

• All printing errors in the queue for a shared printer

  I have a HP6110 connected to an XP machine.  It is shared and the printer is installed on a computer vista laptop.  I could print however now each job is in the queue and then goes into an error state.  The only way I can remove the task from the queue is to restart the print spooler.

  How can I fix once and for all?

  Well, I never aspired to be certified MCSE on NT than a few computers existing except in places like Bletchley Park to crack the enigma code messages .

  Deleting the files in the folder is at the heart of the fixing of the problem if my hypothesis about your problem is correct. The problem is one of the frequently reported printer problems.

  Don't forget to tell me the version of Adobe Reader, you?

• Error in the driver for the new DVD player,

  The SATA DVD drive is nine, works of a system boot when I put in a windows install disc and do a start up cold, but drive does not work to complete startup. Got update driver and same driver deleted and reloaded, still does not work, contact manufacturer (Memorex) not much help from them other that telling them that this is a conflict of microsoft. Checked the settings of currency, system error Code 39 in the properties of the device such that the system does not recognize the reader cannot understand cela one, seems to be a software conflict but do not know if this is another driver or Vista conflict causing the error code. Flat, system does not recognize the drive. After running the driver update you get a msg saying the system thinks that the best driver is already installed.

  Hello

  Try the microsoft 'fix - it' for your problem below

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  and read this information too

  http://support.Microsoft.com/kb/982116/en-us

• Backup error Windows - the volume for a file has been changed outside...

  I had this error with Vista n now with 7 and killed a few cd trying to figure out.  I get the error even if the CD is formatted first or not.  However, I can't get my backup to run.

  Any ideas?  Or any step-by-steps that I should try?

  I had this error with Vista n now with 7 and killed a few cd trying to figure out.  I get the error even if the CD is formatted first or not.  However, I can't get my backup to run.

  Any ideas?  Or any step-by-steps that I should try?

  Hey QEDDave

  It's an instance of vista installation

  Read how to back up vista on the link below

  http://www.vista4beginners.com/how-to-backup-your-data

  Get to know windows 7 below

  http://www.Microsoft.com/Windows/Windows-7/features/backup-and-restore.aspx

  http://www.howtogeek.com/HOWTO/1838/using-backup-and-restore-in-Windows-7/

  and here's the forums windows 7 for you to repost in

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

  Walter, the time zone traveller