Question on the order of a CD of Windows XP SP3 fix

Similar Questions

• A question about the order of the COIL and blank lines

  Hello everyone,
  
  
  
  I have a question on the order of the COIL. Here is the syntax of my sql script file

  HOST SET NLS_LANGUAGE=FRENCH_FRANCE.WE8MSWIN1252;
  SET SQLBLANKLINES ON;
  SET TRIMSPOOL ON;
  SET SERVEROUTPUT ON;
  SET LINESIZE 10000;
  SET PAGESIZE 10000;
  SET COLSEP '|';
  SET HEADING OFF;
  SET ECHO OFF;
  SET FEEDBACK OFF;
  SPOOL result.txt
  
  
  -- And here I write my sql queries.
  
  
  SPOOL OFF;

  It works quite well, and every time the script is run, the file ' * result.txt "* contains the result of the request." " However, whenever there is a blank line at the beginning of the file ' * result.txt* '. I don't know why this unwanted blank line is inserted automatically whenever I run my script. I have to delete manually (otherwise I have problems with my script Unix interpret these files) and as I have several files to update, this could be your time. Is it possible to get rid of this unwanted blank line?
  
  
  Thanks in advance,
  
  
  Kind regards
  Dariyoosh

  SET PAGESIZE 0;

• I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2572073)
  A security update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2518864)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2633880)

  They all install properly but switches back to windows update to install. It's some kind of loop.

  Hi billy73,

  In addition, if you still have questions, please take a look at the thread similar here with a solution as possible.

  I hope this helps!

• Question of the order of events and functions

  Hello

  Sorry for the stupid question, but I'm working on something big and I would hate a small rock to thow me off in the end.

  So here it is:

  I not know how to operate the functions-> if you have:

  function function1() {}

  function3();

  }

  function function2() {}

  }

  function function3() {}

  }

  function1();

  function2();

  First runs function1 and function2 and function3. Is simple baptisms the function1 + everything it has nested functions again from the top to the bottom, then function2 etc.

  OK, so now I have this situation:

  If you have an INTERNAL component that is in the MAIN component. If you addEventListener (FlexEvent.CREATION_COMPLETE, test) inside of the INSIDE (class of the function of construction in my case) and also add the same event listener once again inside but the MAIN ingredient such as:

  public void main_creationCompleteHandler(event:FlexEvent):void {}

  inner.addEventListener (FlexEvent.CREATION_COMPLETE, test);

  addElement (inner);

  }

  Then you will have 2 event for the same event listeners. First one written to the INNER component will run, and then it will run in the MAIN component.

  Now if I set many many functions in INNER creationCompleteHandler, will all 100% complete before the creationCompleteHandler to HAND work?

  As I tested it, it looks like each treatment must be 100% made to the INNER creationCompleteHandler before it passes to the creationCompleteHandler of HAND.

  Can someone confirm that flash/flex works like that? Thank you!

  FM_Flame wrote:

  Hi Alex, guys,.

  so, I would like to summarize the question and if we can just say Yes or I guided even what is Yes, then there is no confusion

  Here are 2 scenarios:

  1) 2 headphones are added to the same same thing e.g. CREATION_COMPLETE - one for the component and the other to the container.

  It works like this:

  un) pane-> creationCompleteHandler starts to perform its functions/activities

  b) containing-> creationCompleteHandler starts to perform its functions/activities

  The question here is: will a) be 100% full before before flash moves to b) or b) could happen sometimes some time one) is running?

  Note: Yes this means a) will be 100% complete bofore b) occurs.

  2) for the second scenario allows to take 2 different events INITIALIZE and the FlexEvent CREATION_COMPLETE and add the listener both in the component only this time, so we do not complicate things.

  It works like this:

  un) pane-> initializeHandler starts to perform its functions/activities

  b) pane-> creationCompleteHandler starts to perform its functions/activities

  The question here is the same: will a) be 100% full before before flash moves to b) or b) could happen sometimes some time one) is running?

  Note: Yes this means a) will be 100% complete bofore b) occurs.

  Thank you very much

  (1) flash is currently single-threaded, so a Manager will end before the end of another Manager for the event itself. The processing order is not guaranteed and since your handlers are listening for the event attached to the same object, that it is imprudent to write code that depends on the order in which these handlers are called. Adobe are working to multi-threading the flash plugin, in the future any order that may now exist differrent in the future and any treatment that depends on a single completion handler until the other is called can also fail in the future because a multi-threaded player could activate the two managers simultaneously.

  It's nice to have answers Yes/No, but only if you want to write poor code that can work, by accident, until something changes that you have no control over.

  Do not write code that depends on the order this event handler is called for the same event.

  (2) initialize occurs before the complete creation. The answer is Yes.

• How to change the order of startup programs in Windows 7

  I read that two threads on this or that give an adequate response.

  The question is simple. Is it possible to change the order of the start up programs in win 7. Possible answers "YES" or «»

  If YES how are you?

  If no why not?  And is there a third party software to do?

  I have a startup where a program/process support before another program/process which it depends so I have the first program does not start.

  I need to change that.

  So if it is not possible to change to uninstall both and then reinstall in order they need to charge to fix it?

  NWF

  Possible but not easy.  You can create a scheduled task that runs when the connection that launches first app one then call a second scheduled task, which starts the second.  (scheduled Research task) I would give the exact steps but am not on a win 7 atm machine.

  On win 10 that it looks like this

  

• Question on the recorder of actions (ESP) for Windows XP.

  Hello team,

  I'm really impressed with the new tool of the action recorder, which comes with Windows 7. It really helps and saves a lot of time.

  Is there any recorder measures (PSR) problem for Windows XP?

  If not, what third-party tool you're suggesting which can be used with Windows XP?

  No response to most early would be really appreciated.

  Yes, it's mainly for end-users to use, let us know what they see.

  Example: To re-create a problem, in a graphic way, etc.

  There is no directly (just as) tool I know.  However, you are not the first to ask the next question.

  You can watch in this solution which was mentioned several years ago and you can get them directly from this article.

• The desktop icons are highlighted in Windows XP SP3 machine.

  Original title: text underlined on desktop.

  I have Windows XP, SP3.  On my desk, the names of all the icons are underlined.  In addition, to open an icon, I need only simple click instead of the usual double-click.  How can I correct this abnormal behavior?

  Hi MikeTinVA,

  You did it changes on your computer before this problem?

  This occurs when you click single-click to open an item in folder options.

  You can follow these steps and check if the problem persists.

  a. Click Start > my computer.

  b. click on tools > folder options.

  c. in the general tab, select the option double click to open an item.

  d. click on apply and OK.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Question about the order of stop/f

  Hello

  We follow several Windows computers using software from a 3rd party provider. (N-Able Technologies) Recently on our servers, we have observed that after some automated routines, we would find that the "Unscheduled stop" window was displayed after these routines.  After asking a few questions to N-Able, I discovered that their routine included restarting the command shutdown / r/f in order to ensure that the judgment is carried out successfully.

  My question would be as follows:

  This could potentially be dangerous to all servers that we have with SQL or Exchange databases on them?  It may cause corruption if the databases are forced to stop?

  We have servers ranging from 2003 to 2012 with the majority of them being SBS servers.

  Thank you

  Jesse

  Being a server COMPUTER related, I recommend that you ask on the TechNet forums. This site is more for individual consumers.

  See: http://forums.technet.microsoft.com

• Question about the order of evaluation of the clause WHERE CLAUSE when the Oracle OF the syntax used to join tables

  Hello

  Oracle version: 11.1.0.7.0 - 64 bit

  I read the documentation online at joins. The page is avialable here: joins at

  My question is about the join order of evaluation of the conditions in clause and the conditions of those

  are not the join conditions and are placed in the WHERE clause.

  Consider the following pseudocode

  SELECT

  T1. Col1,

  T2.Col1

  Of

  Table1 t1 LEFT OUTER JOIN table2 t2

  WE

  (condition_expression1)

  WHERE

  (condition_expression2)

  Is it correct to say that if there is no column on the status of join (condition_expression1) in condition_expression2, then condition_expression2 is executed before condition_expression1? In other words, oracle always trying to filter based on the WHERE clause individually each table as much as possible before joining them based on the conditions on the article?

  Thanks in advance,

  Hello

  dariyoosh wrote:

  Hello

  Oracle version: 11.1.0.7.0 - 64 bit

  I read the documentation online at joins. The page is avialable here: joins at

  My question is about the join order of evaluation of the conditions in clause and the conditions of those

  are not the join conditions and are placed in the WHERE clause.

  Consider the following pseudocode

  SELECT

  T1. Col1,

  T2.Col1

  Of

  Table1 t1 LEFT OUTER JOIN table2 t2

  WE

  (condition_expression1)

  WHERE

  (condition_expression2)

  Is it correct to say that if there is no column on the status of join (condition_expression1) in condition_expression2, then condition_expression2 is executed before condition_expression1? In other words, oracle always trying to filter based on the WHERE clause individually each table as much as possible before joining them based on the conditions on the article? ...

  The reverse is actually closer to the truth, but we can't really make general statements like that.

  SQL is not a language of the proceedings.  Looking at the code SQL, we could say that the code does, but we cannot say much about how that code it.  In other words, SQL is a language that describes the results you get, not the way to get them.

  The optimizer will do everything what he thinks is faster if it does not change the results.  If any order in which they are applied (in outer joins or CONNECT BY queries, for example), then think of the join is done first, and the value of the WHERE clause is applied to the result of the join.

  Here is a query looks very much like you posted:

  SELECT d.deptno

  e.ename, e.sal

  OF scott.dept d

  LEFT OUTER JOIN scott.emp e ON e.deptno = d.deptno

  WHERE e.sal > = 3000

  ORDER BY d.deptno

  ;

  Output:

  DEPTNO ENAME SAL

  ---------- ---------- ----------

  10 KING 5000

  20 FORD 3000

  20 3000 SCOTT

  The scott.dept table contains deptnos 30 and 40; Why are they not in the result set?  The query behaves as if the outer join is made first (production 15 rows), then the WHERE clause has been applied.  All lines with deptno = 30 had sals down han 3000 and all single line with deptno = 40 was NULL in the sal column, then these lines are excluded (as well as other lines of deptnos 10 and 20), and only 3 lines above are left.

• A question about the order of COLUMN sqlplus and PL/SQL

  Hello everyone.
  
  
  
  I would like to ask a question about sqlplus command COLUMN that I use in order to define the length of my queries of output columns. So, for example, I run something like:
  

  COLUMN market FORMAT a20

  That is why any column with the name 'the market' will be composed by sqlplus as 20 characters.
  
  Currently I'm working on a PL/SQL script that makes this automatic procedure, in other words, instead of manually write for each column in the above COLUMN order, it uses the DBMS_SQL. He read first as input the name of the table and then inside a loop, it detects the maximum length.
  
  For those interested, here is the Oracle documentation page that I found (example 8)
  http://download.Oracle.com/docs/CD/B19306_01/AppDev.102/b14258/d_sql.htm
  
  If everything worked well enough I managed to recover the maximum of each column in my table length, except that I don't know how to use the COLUMN sqlplus command in my PL/SQL block. I would like to do something like that (it's just a pseudo-code)
  

  FOR colIndex in 1 .. numberOfColumns LOOP
          currentColumnName = getColumnName(tableDescriptionObject, colIndex);
          currentColumnLength = getColumnLength(tableDescriptionObject, colIndex);
          
          COLUMN  currentColumnName FORMAT a -- and here after 'FORMAT a' I have to write currentColumnLenth but I don't know how to proceed.
  
  END LOOP;

  I would like to know is there a command in PL/SQL to define the appropriate column typeset in sqlplus length?
  
  
  Thanks in advance,
  Dariyoosh

  Hi, Dariyoosh,

  Sory, I don't think that there is a simple way to publish SQL * most orders fom PL/SQL.
  PL/SQL runs in the database (back-end); There isn't any direct contact with SQL * more at the front end.

  The best way I know is that PL/SQL script (myfile.sql) with orders of the COLUMN, and then have SQL * more run the script (@myfile).

• Question about the control panel user accounts in windows 7.

  This might be a bit of a strange question, but I'll see what I get. Basically when I enter the control panel via my username (not the admin account) and click on "Add or remove user accounts" and enter a password to admin, the photos on my user and admin account both fail (but they are there on the log on screen, etc.). But the guest account (which is disabled) the image of bag of comments showing. But if I enable the guest account, the image disappears. Strange. Any ideas how to get the pictures to show up there?

  Also, I will add that this occurs only in the standard user, not my account Admin accounts I converted my standard account to an administrator account, and the pictures then decided to appear.

  Thanks for your time.

  I have the same problem, and that this does not affect my usage, I don't worry in this regard. Frankly, I was wondering that myself...

• General questions about the hardware of a computer running windows 7

  Hello

  I downloaded the third-party software to measure alive my processor and heat from the hard drive.

  now my question is

  Wat is the maximum heat for a processor is normaal in action 50 or higher?

  THA same I ask for the hard drive.

  Thank you

  Johan

  Hello

  I downloaded the third-party software to measure alive my processor and heat from the hard drive.

  now my question is

  Wat is the maximum heat for a processor is normaal in action 50 or higher?

  THA same I ask for the hard drive.

  Thank you

  Johan

  Hi Johan

  It depends on the manufacturer, the type and the version of the processor, as well as the way in which the CPU is used.

  Operating temperature of the processor FAQ:

  http://www.Intel.com/support/processors/sb/CS-033342.htm

  Concerning

• Question for the Vista Home Premium upgrade to Windows 7?

  After you run the Upgrade Advisor, I like Windows mail is compatible with Windows 7. How can I save my emails filed so I don't lose them when I do the upgrade? Thamks

  Windows Update has nothing to do with the upgrade of Windows. That being said...

  Your Windows Mail data will be preserved when you switch to Win7.

  Unlike Vista and Windows XP, Win7 does NOT have any default mail client. However, you can install Windows Live Mail (free) or another e-mail Client (e.g. MS Outlook, which is not free) and then import data from Windows Mail stored in your new email Client.

  You can find more help in this specific Win7 forum: http://social.answers.microsoft.com/Forums/en-US/w7network/threads

  You will find public support for Windows Live Mail in this discussion group: http://www.microsoft.com/communities/newsgroups/list/en-us/default.aspx?dg=microsoft.public.windows.live.mail.desktop

  You will find support for MS Outlook in this public discussion group: http://www.microsoft.com/communities/newsgroups/list/en-us/default.aspx?dg=microsoft.public.outlook.general

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• QUESTION ABOUT THE REASONS OF PROGRAMS OLDER ON WINDOWS 7/WINDOWS VISTA - 64/32 BIT

  Tried to install older programs that work on Vista but will not install on Windows 7 from the cd/dvd drive. Issue seems to be that I run 64-bit and Vista is 32-bit depending on the message I get. I tried to run the settings for all of the operating system that offer previous versions of win 7 troubleshooting and don't fix the problem. All the other things I could try would be appreciated. Or could there be another reason why they moved?

  Have .jpg thank you message

  My PS CS4 is installed on another Partition of Windows, but it has most of the Adobe/Apple and Photoshop files in my User/AppData/Local and other user folders, as well as the three "Program" in C:\       (check out the common files under files as well).

  -I guess the main problem is that Win7 64 bit has three "Program Files" folders, so if Vista 32 bit

  only one, or two, it might be difficult to determine which go in Program Files or program data

  [The main installation files will go in Program Files (X 86) ].

  -It can come down to experience, but in many cases, the files/folders in directories

  Other than the main installation directory, would be the configurations of users, programs or files added to this program, either created after being installed and run, so I hope that the "missing" files will be created after you have used the software.

  -In some cases, it is not to copy the configuration in files, because they may have information on the system

  from the previous machine and the version of Windows that can cause a conflict.

  -You should be able to find more information on the file/folder locations and get the programs

  upward and running on Win7 64 bit someone on a forum dedicated Photoshop or Webster.

• Blue screen after the recent updates of security for Windows XP SP3.

  I got following error messages "Blue screen" after the latest updates from Microsoft:

  0X0000007E (0X8053355E, 0XBA4CB50C, 0 X 80000003, $0XBA CB208). I tired to run in all modes of SECURITY but still had the same problem. I ran Dell diagnostics and it came with no error in memory or hard drive. I have a Dell Inspiron B130 w/2 MB of RAM. Does anyone have a solution? The laptop came with no CD boot.

  @Jazzman1962 and flowie,

  I suggest you follow the steps mentioned by 'LThibx' in the http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/73cea559-ebbd-4274-96bc-e292b69f2fd1thread.

  -------------------------------------------------------------------
  Naveen
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.