Question simple Ram OS 10.5.9

Similar Questions

• Question about RAM CL

  Hi guys. I'm finalizing my PC build and I have a question about ram CL I can't find answers for hackers page here. http://ppbm7.com/index.php/news/planning?showall= & start = 3

  I would use these two RAM sticks for example.

  Module 240 pin DDR3-1333 transcend JetRam™ 8 GB High Performance: CL9, layer 6 circuit board

  Transcend JetRam™ High - Performance 8 GB DDR3-1600 240-Pin Module: CL11, 6 layer PCB, ultimate card stability and cross-platform compatibility

  My question is, what is the best for video editing? On the one hand we have 1333 mhz to with a CL of 9. On the other hand, we have RAM 1600 mhz faster, but at a higher CL of 11. Now, I'm not one to get caught up in the technical aspects as it may seem, but I don't understand so I can make decisions, especially when price is a factor. In this case however, they are at the same price...
  

  Well good for video editing, important criteria for RAM is:

  • Never, never crashes - it is very important; choose only RAM sticks (certified QVL) certified provider and do not use unmatched sticks
  • Speed; faster is better - while true also, past at the speed of the RAM, or lowering of the CASE wait cycles (latency) contribute to the speed, but the gains are very low; Faster RAM is hardly perceptible vs CPU speed more fast which is very sensitive (I played with it a lot on some versions overclock and test first with PPBM speed and speed up the processor 5% performance contributes to 5% where speed RAM about 30% can speed up about 1%)

  Google "what is the CASE for the RAM" and one week at self-teaching yourself if you want to even begin to really understand speed RAM! I know enough to know there is a lot to learn about the subject. The good news is that you don't need really to know a lot to build a reliable, excellent for running Adobe products, including the first, Photoshop and After Effects:

  • Use only RAM who has certified the seller of memory for your motherboard; do not assume that if the seller indicates a set 4x8Go of sticks that will work with your motherboard that two sets of such RAM will work with a card mother 8 locations either! (too late to discuss here, but various factors may override the controller memory in the processor itself - factors include voltage RAM, number of sticks, RAM clock, status of CASE of waiting settings speed, voltage of the cpu memory controller and maybe more)
  • Increasing the speed of the RAM always helps if slightly for first speed up to 1600 MHz (for x 79 in any case) and wins the speed of RAM which are still lighter

  Now, back to why both sets of sticks are the same cost. They most likely use the same chips of RAM, which is an important factor for what it costs to build the RAM sticks. While the Asus motherboard you buy allows full customization of many, many, many things, unless you are an extreme Overclocker and plan to spend a few weeks to fine-tune a new simple version you in the bios of motherboard and it say to use XMP settings. This indicates the motherboard, how to set the speed of the RAM and sticks of timings CASE for your particular RAM with the settings the seller intended.

  You really know a lot about what you are doing to set the timings RAM in any way other than the simple choice of XMP settings safely. And, you can easily burn your CPU if you don't know what you're doing and you choose some really bad parameters.

  Kind regards

  Jim

• Question about RAM

  Hi, I have question about ram because I'm so confused how this works.

  on my computer it says quad core and 6 GB of ram doesn't mean it all to combine them is 6 GB of ram? or each one is 6 GB?

  on my system config it says 6 GB so it means that each of them is 6 GB?

  and could you explain how to work this thing of hearts?

  Hello

  If your laptop is 6 GB of ram, it will mean that it is a 4 GB module in a slot and a 2 GB module in the other.  You can always refer to download and install the application at the link below.

  http://www.CPUID.com/softwares/CPU-z.html

  One time installed, launch the application, click the SPD tab and you will see the size of the memory card in the location selected in the drop-down list.

  More info on multi-core processors can be seen here.  Details in this regard are visible in the CPU tab on the above application.

  Kind regards

  DP - K

• question simple css

  Hello
  
  I'm stuck with a question simple css-
  
  I need to display some text below the other strings:
  
  Text1
  Text2
  Text3
  
  I use jspx:
  
  < af:panelGroupLayout layout = "vertical" >
  
  < af:panelGroupLayout >
  < af:outputText value = "text1" / >
  < / af:panelGroupLayout >
  
  < af:panelGroupLayout >
  < af:outputText value = "text2" / >
  < / af:panelGroupLayout >
  
  < af:panelGroupLayout >
  < af:outputText value = "Text3" / >
  < / af:panelGroupLayout >
  
  < / af:panelGroupLayout >
  
  
  well, I receive the channels displayed vertically.
  
  
  but I need them to the right of the screen-
  
  so I use the style class:
  
  {.textClass}
  float: right;
  }
  
  and adding in all three group layout in the hope that the three strings to shift right-
  
  < af:panelGroupLayout layout = "vertical" >
  
  < af:panelGroupLayout >
  < af:outputText value = "text1" styleClass = "textClass" / >
  < / af:panelGroupLayout >
  
  < af:panelGroupLayout >
  < af:outputText value = "text2" styleClass = "textClass" / >
  < / af:panelGroupLayout >
  
  < af:panelGroupLayout >
  < af:outputText value = "Text3" styleClass = "textClass" / >
  < / af:panelGroupLayout >
  
  < / af:panelGroupLayout >
  
  
  they go right, but they are now displayed on one line:
  
  text3text2text1
  
  
  what I wanted was-
  
  -------------------------text1
  -------------------------text2
  -------------------------text3
  
  
  Please suggest.
  
  Thank you.

  Why so complicated?

  the round is played.

  Timo

• Satellite 3000 - X 4: Question about RAM upgrade

  Hi all

  I'm looking for more information on how to upgrade the RAM for my SATELLITE S3000 - X 4 (120 MB RAM, 14 GB HD I think!). Here's a little history...

  This laptop is about 5 years old, and I'm hoping to speed up a bit. I don't want to buy a new computer because she usually serves my needs.

  I emptied my hard drive files and unwanted programs. And I ran Jv16 Power Tools to clean the registry and minimize starts the process.

  It's always a little slow and if I am considering upgrading the RAM because I think I can do this for about £50. My questions are:

  What type of upgrade RAM should I look to buy? (This laptop have 2 RAM "plug-ins" or just one?)
  What is the size of RAM upgrade is the maximum an S3000 - X 4 could face?
  Could a novice like me to adapt to the style DIY upgrade?

  Thanks for any help you can offer!

  Gabrielle

  Hi Gabrielle

  He is old enough. I looked for some info, but unfortunately I n t have not found much. The device can use the 512 MB of RAM, and you can use 2 sticks of memory. I'm not 100% sure but I think you can use the module with tracking number PA3086U - 1. 25 M.

  The unit is not known to me but please check the underside. On most units, you can find coverage of memory.

• A few questions about RAM upgrade for Tecra M5 (PTM51E)

  Hallo

  I have Tecra M5 (PTM51E). My questions are:

  Is it possible to put even more RAM on my laptop? (Now I have 1 GB),
  Should what kind of RAM I buy?
  Where can I buy it?

  And I can put this RAM on my laptop by myself or it is not so easy to do this?

  Hallo

  You can upgrade your Tecra up to 4 GB of RAM. Compatible modules are:

  PA3499U - 1 M 25 (Kit of memory 256 Mo DDR2-667)
  PA3511U - 1 M 51 (Kit of memory 512 MB DDR2-667)
  PA3512U-1M1G(DDR2-667 1GB Memory Kit)
  PA3513U-1M2G(DDR2-667 2GB Memory Kit)
  DDR2-533 256 MB (PA3389U - 2M 25)
  512 MB DDR2-533 PA3412U - 2 M (51)
  1 GB OF DDR2-533 (PA3411U-2M1G)

  Use the part numbers and put in the Google. You will find many online shops where you can order.
  You can also visit the homepage of Kingston and find compatible modules for your Tecra. Use only the numbers of parts and search for cheaper online store.

  All that s!

  Subject of the Exchange there not a lot of philosophy. See page 151 in s manuals for your Tecra.
  Everything is described here.

• Satellite A200 - Question on RAM and HARD disk partitions

  Maybe it's in the wrong section... I do not know.

  I've never owned an OEM operating system and I do not understand why the HARD disk is partitioned, 90, 2, 90 (who thought of that?).

  The thing is that I have to format and partition differently (since I dual boot Linux) and need to create a structure more like 40,40,100 or such. (100 in fat32, so data is available for both)

  Now I wonder what data should I keep these readers. There is a folder called Toshiba on the C:\ drive that seems to have the drivers and such, some wallpapers and who knows what else. Then there's the WinRE called D: drive which has a kind of sdi and wim files.

  Another question, if I buy the 2 GB that is listed in the compatible options for my laptop (A200 - 28 p)
  Link: [http://uk.computers.toshiba-europe.com/innovation/jsp/individualOptions.do?service=UK&OPTION_ID=138301&t oshibaShop = true & SelCategorie = 4700]
  It will match the 2 GB already in the laptop? It will void the warranty anyway?

  Hello

  > I've never owned an OEM operating system and I do not understand why the HARD disk is partitioned, 90, 2, 90 (who thought of that?).
  I assume you are using Vista.
  The 2 GB partition is a hidden partition which contains the data and the backup files in Vista. This partition will be automatically created during the installation of Vista.

  On the other partition 90GB.
  Well, this partition (partition of data) can be used to store files such as photos, movies, personal documents, etc. it s always recommended to partition a large HDD in more partition. This improves performance because the OS can access files much faster.

  Of course, you can change the size of the partitions. In Vista, you can change this in disk management.

  Regarding the upgrade of RAM;
  The laptop seems to supports the Intel® PM965 chipset and it manages 4 GB of RAM. It seems that you could use a 2 GB of RAM in one slot.

  Welcome them

• Qosmio F10: Question about RAM upgrades

  Hello

  I have a laptop Qosmio F10, and it crashed in the summer 2006, so I sent it to Toshiba and changed it the motherboard. I got a new version with the nVidia card 6600 and I have 2x512MB PC2700S DDR - RAM (the one that came with it, the one I added).

  Recently, I managed to find a buyer for these Rams, to switch to 2 x 1 GB, so my question is: can the motherboard handle faster DDR - RAM (with 400 MHz instead of 333 MHz like the ones I have) or should I just stick with the same model (PC2700 - 333 MHz)?

  Thank you

  Hello

  I recommend you to install a program of diagnosis of equipment as Everest Home edition for example. Then check how fast the bus (FSB) front supports.
  If it s 400 Mhz or faster, then you can use the 400 Mhz memory modules.

  I hope I could help

  At soon amigo ;)

• Satellite A100 PSAARA - Questions about RAM, VGA and BIOS

  I used Toshiba Satellite A100 PSAARA, now I have a few questions:

  1. I have updated the BIOS for my laptop (new version 6.0 to version 5.10): everything seems to work ok, but after I rebooted the laptop, it automatically connect a black screen with these warning "checksum bad sectors, F1: default settings, F2:..." (remember exactly).
  I pressed F1, my Toshiba reboot works ok after that, so there's something wrong with this warning?

  2. I upgraded RAM to 2 GB (1 GB + 1 GB) with the KingMax brand, if the RAM expandable max I can do on my laptop?

  3. This Toshiba laptop use to edge or video card, I check my Nvidia geforce card real estate (laptop) and I saw this: memory: 256 MB + RAM shared memory: 256 MB = 512 MB of total memory?
  So: can I upgrade my card graph and maximum card that I can use?

  4. I cannot set 75 Hz for refresh monitor, can see 65 Hz

  Thanks for your help!

  1. try to load the default settings in the BIOS. Then it should work.

  2. the Satellite A100 supports 4 GB max.

  3. No, the graphics card can not be changed. It s soldered on the motherboard and cannot be exchanged.

  4. what internal or external monitor? Monitor internal and other s LCD works best with 60 Hz.

• Question upgrade Ram M2N68 - narrated (5)

  I hope someone can help me here;  in any case, to start with, the motherboard M2N68 - THE has a Phenom II X 4 945 cpu and 4 GB PNY pc2-6400 optimima running at 1.8 volts on a Win 7 64 bit OS.  I want to do is increase the Ram up to 8 GB of ram (2 x 4 GB) of the Patroit. This would be possible on this type of advice?  If this is not the case, what is the max voltage that the motherboard can handle because PNY has also 4 GB of ram with CAS4 XLR8 @ 2.0 v I had to get incase the Patroit cannot be used.

  Thanks

  Hi Dave;

  Thanks for responding to my question. I was hoping that these modules DIMM XLR8 would have worked at least.

  Thanks again.

• 10 Questions Omni - RAM, USB and case

  Hey guys,.

  Is it possible to add more RAM to my 10 Omni? I haven't shot it apart as I don't know it voids the warranty, but for later use, I'd be able to add one other DIMM?

  Thank you

  ~ 8 bit

  EDIT: See the last post for the supplementary question.

  Too bad.

• Dell Optiplex 320 yet an another Question of Ram

  Hello

  I have an Optiplex 320 and it seems do not like this kind of ram. I tried this and several other modules I had to hang out with the exact specifications of same. My question is, what makes Hynix so special that it works with the optiplex? Is there something owner seeks the mobo?

  With the Hynix ram the machine starts fine, no problem. With the Kingston (and other brands) of PC2-5300 it don't POST and gives me the 1-3-2 beep code.

  Here's what I did to solve problems. (I've got 2 identical Optiplex 320 I did this troubleshooting)

  • Reinstall and reinstall the modules of resettlement
  • Install the latest version of the BIOS. (ending in12)
  • Delete and remove cmos
  • I tried PC2-6400
  • CUSS at it
  • Deleted graphics card
  • Attempt 1 module at a time

  Basically, what is the difference?

  Any ideas would be greatly appreciated.

  Thank you.

  Work RAM

  

  RAM does not

  

  I mentioned that I'm a huge ASUS and Corsair fan. :-)  I swear by the two.

  Corsair has a "memory Finder" page.
  See the link below.
  Corsair has done the job to see what is compatible with common systems.  Of course, they have listed Dell systems.
  That's what I used when getting memory for my 8900 XPS.

  

  Yes, the DRAM is can be a huge pain for materials developers.  "Today", most hardware designers use models tested beforehand and DRAM pre-approved and layouts.  But not all of us have this chance.  There are times when custom DRAM controllers are needed.  And someone has to do the designs which use a lot of other hardware engineers. :-)  Then, the DRAM manufacturers provide detailed hardware simulation models and precise signal integrity models.

  I'm a fan of Intel, not so much a fan of the DRAM factory.  So I look at it, it's basically like this, that the Intel chips have good tolerances.  This is the DRAM chips which vary tolerances and more.

  Also, is the "fastest" DRAM * not * always work in a system that isn't spec'd for it.  The fastest DRAM also "can carry data more quickly after the clock (one of many waiting time parameters).  So in this case, it depends if that specific DRAM contains the data a bit longer (this fine and in spec), or this memory controller specific Intel is able to work with data held not valid so that requires the Intel specification.

  Also, voltage, temperature, aging, all come into play in the electronics of the real life and tolerances.
  Then, you can see why some people say "XYZ" works in _my_ system.  But, who can * not * always be the case with each system.  It can work in 90% of the systems, and then these 10% are screwed.  So this is why * I * have different opinions on which suggests improvements.
  * I * don't want these 10%, 20%, 70%, either, to screw.

  I see the Corsair Memory recommended as work for? ~ 99.99%? of the people.  So, maybe 1 in 10,000 will be out of luck trying the upgrade?
  My _guess_ is that Dell has between a 5-sigma and sigma-6 rates of their PC and max upgrades memory failure.

  5-sigma failure rate: 0.023% (99.977 good)
  6-sigma failure rate: 0.00034% (99.99966 good)

  

• Question simple signatures!

  Hello team Cisco,

  I have a simple question for you to do. Why disable most of default signatures? Have no explanation? Why are obsolete? What signature should I allow and what should I disable?

  You could help me, please?

  Kind regards

  Rodrigo Alves

  My thoughts without order.

  set to disable by default signatures

  a. a few signatures are vulnerabilities that are very old. Signatures would be necessary only in rare cases. Affecting the default signature can save resources to the IPS.

  (b) the quality of a signature is perhaps not very high. If the signing is enabled, a large number of false positives generated may be creating frustration for the admin.

  I could go on, but I think you get the idea.

  What signatures need to be activated?

  Signatures that meet your environmental requirements must be enabled. If you are a shop all Windows, you don't need signatures Unix oriented. In addition, you must enable the signatures that match your organizations security policies.

  I would start with the signatures of what Cisco has enabled by default. Feel you comfortable alerts, false positives tune and address problems, allow more signatures.

• 3 command line questions simple esxi

  Hello
  I have 3 simple questions on the ESXi-shell commands

  1. How can I execute a command dd and gzip the results without storing the file somewhere?

  / tmp # dd if=/vmfs/devices/disks/mpx.vmhba1\:C0\:T0\:L0:1 of=/tmp/dd.dump bs = 1 M count = 20

  / tmp # gzip - c dd.dump > dump.gz

  instead of these 2 lines do it all in one without store dd.dump

  2. how created a list of all the vmx files in a data store without also listing the files whose name as vmx - blabla.vmdk vmx or *.vmxf
  the output must use full paths so I need something like this but without the false results

  find/vmfs/volumes/datastore1 / * | grep ".vmx" | grep - v '.vmxf' > vmx - files.list

  3. How can I grep all files in vmware*.log in a data store for a complex chain as "scsi0:0.filename ="redirect results in a file that lists the results like.

  / vmfs/volumes/datastore1/test/test. VMware.log: 2012-10 - 01 T 07: 19:00.120Z | VMX | Scsi0:0.fileName DICT = WIN02.vmdk

  / vmfs/volumes/datastore1/test2/test2. VMware.log: 2012-10 - T 02, 07: 19:03.120Z | VMX | DICT = test2.vmdk scsi0:0.fileName

  Thanks in advance

  3. you could xargs - find/path/to/vmfs /-name 'vmware*.log ' | XARGS grep-i chain

  I guess that's 4.1 - I'm still not sure if ESXi xargs

  HTH

  ~ Stephanie Sai

• Question simple reversal...

  Hi guys... Simple question...

  I have 1 MC with buttonMode = true. There are 2 text fields that are nested inside the graph 1 button inside the MC. My question is that when I roll my mouse and my switch, the roll effect is gone if I roll over my text fields... the mouse is still inside the button image but the roll effect has gone... see below...

  -------------------

  |  TextField one |

  |  TextField b | <-button

  |                 |

  -------------------

  I hope that I explain myself well... when I roll over to textfield a or b... the effect for my button, the reversal went... ideas? Thank you...

  use:

  yourmc.mouseChildren = false;